Completes the removal of `try-runtime-cli` logic from `polkadot-sdk`.

[litep2p](https://github.com/altonen/litep2p) is a libp2p-compatible P2P
networking library. It supports all of the features of `rust-libp2p`
that are currently being utilized by Polkadot SDK.

Compared to `rust-libp2p`, `litep2p` has a quite different architecture
which is why the new `litep2p` network backend is only able to use a
little of the existing code in `sc-network`. The design has been mainly
influenced by how we'd wish to structure our networking-related code in
Polkadot SDK: independent higher-levels protocols directly communicating
with the network over links that support bidirectional backpressure. A
good example would be `NotificationHandle`/`RequestResponseHandle`
abstractions which allow, e.g., `SyncingEngine` to directly communicate
with peers to announce/request blocks.

I've tried running `polkadot --network-backend litep2p` with a few
different peer configurations and there is a noticeable reduction in
networking CPU usage. For high load (`--out-peers 200`), networking CPU
usage goes down from ~110% to ~30% (80 pp) and for normal load
(`--out-peers 40`), the usage goes down from ~55% to ~18% (37 pp).

These should not be taken as final numbers because:

a) there are still some low-hanging optimization fruits, such as
enabling [receive window
auto-tuning](https://github.com/libp2p/rust-yamux/pull/176), integrating
`Peerset` more closely with `litep2p` or improving memory usage of the
WebSocket transport
b) fixing bugs/instabilities that incorrectly cause `litep2p` to do less
work will increase the networking CPU usage
c) verification in a more diverse set of tests/conditions is needed

Nevertheless, these numbers should give an early estimate for CPU usage
of the new networking backend.

This PR consists of three separate changes:
* introduce a generic `PeerId` (wrapper around `Multihash`) so that we
don't have use `NetworkService::PeerId` in every part of the code that
uses a `PeerId`
* introduce `NetworkBackend` trait, implement it for the libp2p network
stack and make Polkadot SDK generic over `NetworkBackend`
  * implement `NetworkBackend` for litep2p

The new library should be considered experimental which is why
`rust-libp2p` will remain as the default option for the time being. This
PR currently depends on the master branch of `litep2p` but I'll cut a
new release for the library once all review comments have been
addresses.

---------

Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
Co-authored-by: Alexandru Vasile <alexandru.vasile@parity.io>

This MR contains two major changes and some maintenance cleanup.  

## 1. Free Standing Pallet Benchmark Runner

Closes https://github.com/paritytech/polkadot-sdk/issues/3045, depends
on your runtime exposing the `GenesisBuilderApi` (like
https://github.com/paritytech/polkadot-sdk/pull/1492).

Introduces a new binary crate: `frame-omni-bencher`.  
It allows to directly benchmark a WASM blob - without needing a node or
chain spec.

This makes it much easier to generate pallet weights and should allow us
to remove bloaty code from the node.
It should work for all FRAME runtimes that dont use 3rd party host calls
or non `BlakeTwo256` block hashing (basically all polkadot parachains
should work).

It is 100% backwards compatible with the old CLI args, when the `v1`
compatibility command is used. This is done to allow for forwards
compatible addition of new commands.

### Example (full example in the Rust docs)

Installing the CLI:
```sh
cargo install --locked --path subs...

I don't think there are any more releases to the 0.2.x versions, so best
we're on the 0.3.x release.

No change on the benchmarks, fast local time is still just as fast as
before:

new version bench:
```
fast_local_time         time:   [30.551 ns 30.595 ns 30.668 ns]
```

old version bench:
```
fast_local_time         time:   [30.598 ns 30.646 ns 30.723 ns]
```

---------

Co-authored-by: Bastian Köcher <git@kchr.de>

## Basic example showcasing a migration using the MBM framework

This PR has been built on top of
https://github.com/paritytech/polkadot-sdk/pull/1781 and adds two new
example crates to the `examples` pallet

### Changes Made:

Added the `pallet-example-mbm` crate: This crate provides a minimal
example of a pallet that uses MBM. It showcases a storage migration
where values are migrated from a `u32` to a `u64`.

---------

Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>

The PR provides API for obtaining:
- the weight required to execute an XCM message,
- a list of acceptable `AssetId`s for message execution payment,
- the cost of the weight in the specified acceptable `AssetId`.

It is meant to address an issue where one has to guess how much fee to
pay for execution. Also, at the moment, a client has to guess which
assets are acceptable for fee execution payment.
See the related issue
https://github.com/paritytech/polkadot-sdk/issues/690.
With this API, a client is supposed to query the list of the supported
asset IDs (in the XCM version format the client understands), weigh the
XCM program the client wants to execute and convert the weight into one
of the acceptable assets. Note that the client is supposed to know what
program will be executed on what chains. However, having a small
companion JS library for the pallet-xcm and xtokens should be enough to
determine what XCM programs will be executed and where (since these
pallets compose a known small set of programs).
```Rust
pub trait XcmPaymentApi<Call>
	where
		Call: Codec,
	{
		/// Returns a list of acceptable payment assets.
		///
		/// # Arguments
		///
		/// * `xcm_version`: Version.
		fn query_acceptable_payment_assets(xcm_version: Version) -> Result<Vec<VersionedAssetId>, Error>;
		/// Returns a weight needed to execute a XCM.
		///
		/// # Arguments
		///
		/// * `message`: `VersionedXcm`.
		fn query_xcm_weight(message: VersionedXcm<Call>) -> Result<Weight, Error>;
		/// Converts a weight into a fee for the specified `AssetId`.
		///
		/// # Arguments
		///
		/// * `weight`: convertible `Weight`.
		/// * `asset`: `VersionedAssetId`.
		fn query_weight_to_asset_fee(weight: Weight, asset: VersionedAssetId) -> Result<u128, Error>;
		/// Get delivery fees for sending a specific `message` to a `destination`.
		/// These always come in a specific asset, defined by the chain.
		///
		/// # Arguments
		/// * `message`: The message that'll be sent, necessary because most delivery fees are based on the
		///   size of the message.
		/// * `destination`: The destination to send the message to. Different destinations may use
		///   different senders that charge different fees.
		fn query_delivery_fees(destination: VersionedLocation, message: VersionedXcm<()>) -> Result<VersionedAssets, Error>;
	}
```
An
[example](https://gist.github.com/PraetorP/4bc323ff85401abe253897ba990ec29d)
of a client side code.

---------

Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: Daniel Shiposha <mrshiposha@gmail.com>

Related to
https://github.com/paritytech/parity-bridges-common/issues/2538

This PR doesn't contain any functional changes. 

The PR moves specific bridged chain definitions from
`bridges/primitives` to `bridges/chains` folder in order to facilitate
the migration of the `parity-bridges-repo` into `polkadot-sdk` as
discussed in https://hackmd.io/LprWjZ0bQXKpFeveYHIRXw?view

Apart from this it also includes some cosmetic changes to some
`Cargo.toml` files as a result of running `diener workspacify`.

Bumps the known_good_semver group with 2 updates:
[serde_yaml](https://github.com/dtolnay/serde-yaml) and
[syn](https://github.com/dtolnay/syn).

Updates `serde_yaml` from 0.9.32 to 0.9.33
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.33</h2>
<ul>
<li>Fix quadratic parse time for YAML containing deeply nested flow
collections (<a
href="https://redirect.github.com/dtolnay/unsafe-libyaml/issues/26">dtolnay/unsafe-libyaml#26</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/f4c9ed92385c827a677dae60c2b5a894e24709f0"><code>f4c9ed9</code></a>
Release 0.9.33</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/b4edaee907373ee69c6389687a35fced63d8addf"><code>b4edaee</code></a>
Pull in yaml_parser_fetch_more_tokens fix from libyaml</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8a5542ced61ae21d0772e504fac01bd1dbfaaa6b"><code>8a5542c</code></a>
Resolve non_local_definitions warning in test</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.32...0.9.33">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.52 to 2.0.53
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.53</h2>
<ul>
<li>Implement Copy, Clone, and ToTokens for syn::parse::Nothing (<a
href="https://redirect.github.com/dtolnay/syn/issues/1597">#1597</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/32dcf8df303c7181d95325f159ffbb1870a73e70"><code>32dcf8d</code></a>
Release 2.0.53</li>
<li><a
href="https://github.com/dtolnay/syn/commit/fd1f2aa9979c557e5b95c85f35b8949b8059153f"><code>fd1f2aa</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1597">#1597</a>
from dtolnay/copyprintnothing</li>
<li><a
href="https://github.com/dtolnay/syn/commit/4f6c0528d63874495ce23d197a898cd63cb04d60"><code>4f6c052</code></a>
Implement ToTokens for syn::parse::Nothing</li>
<li><a
href="https://github.com/dtolnay/syn/commit/3f37543794e5d43952399847a2ecbc1eb39f609f"><code>3f37543</code></a>
Implement Copy for syn::parse::Nothing</li>
<li><a
href="https://github.com/dtolnay/syn/commit/36a412217d5217fab5657ab03ebcf29102d87a64"><code>36a4122</code></a>
Update test suite to nightly-2024-03-16</li>
<li><a
href="https://github.com/dtolnay/syn/commit/bd931069f5adb81168e7e6186ead0663cc605257"><code>bd93106</code></a>
Revert &quot;Temporarily disable nightly testing due to libLLVM link
issue&quot;</li>
<li><a
href="https://github.com/dtolnay/syn/commit/06166a77b7d465b0e4c45e1a2162f15031d7f722"><code>06166a7</code></a>
Update test suite to nightly-2024-03-09</li>
<li><a
href="https://github.com/dtolnay/syn/commit/ed545e75d8fdcab5078789ad25fc0efadc14e59b"><code>ed545e7</code></a>
Work around doc_markdown lint in test_precedence</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7aef1edbba28afe1bb6f9ddc0b5095dcd5135849"><code>7aef1ed</code></a>
Temporarily disable nightly testing due to libLLVM link issue</li>
<li><a
href="https://github.com/dtolnay/syn/commit/556b10bf201264172e4b840f8cf1be38b8d75738"><code>556b10b</code></a>
Update test suite to nightly-2024-03-06</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.52...2.0.53">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps the known_good_semver group with 3 updates:
[log](https://github.com/rust-lang/log),
[syn](https://github.com/dtolnay/syn) and
[clap](https://github.com/clap-rs/clap).

Updates `log` from 0.4.20 to 0.4.21
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rust-lang/log/blob/master/CHANGELOG.md">log's
changelog</a>.</em></p>
<blockquote>
<h2>[0.4.21] - 2024-02-27</h2>
<h2>What's Changed</h2>
<ul>
<li>Minor clippy nits by <a
href="https://github.com/nyurik"><code>@​nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/578">rust-lang/log#578</a></li>
<li>Simplify Display impl by <a
href="https://github.com/nyurik"><code>@​nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/579">rust-lang/log#579</a></li>
<li>Set all crates to 2021 edition by <a
href="https://github.com/nyurik"><code>@​nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/580">rust-lang/log#580</a></li>
<li>Various changes based on review by <a
href="https://github.com/Thomasdezeeuw"><code>@​Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/583">rust-lang/log#583</a></li>
<li>Fix typo in file_static() method doc by <a
href="https://github.com/dimo414"><code>@​dimo414</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/590">rust-lang/log#590</a></li>
<li>Specialize empty key value pairs by <a
href="https://github.com/EFanZh"><code>@​EFanZh</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/576">rust-lang/log#576</a></li>
<li>Fix incorrect lifetime in Value::to_str() by <a
href="https://github.com/peterjoel"><code>@​peterjoel</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/587">rust-lang/log#587</a></li>
<li>Remove some API of the key-value feature by <a
href="https://github.com/Thomasdezeeuw"><code>@​Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/585">rust-lang/log#585</a></li>
<li>Add logcontrol-log and log-reload by <a
href="https://github.com/swsnr"><code>@​swsnr</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/595">rust-lang/log#595</a></li>
<li>Add Serialization section to kv::Value docs by <a
href="https://github.com/Thomasdezeeuw"><code>@​Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/593">rust-lang/log#593</a></li>
<li>Rename Value::to_str to to_cow_str by <a
href="https://github.com/Thomasdezeeuw"><code>@​Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/592">rust-lang/log#592</a></li>
<li>Clarify documentation and simplify initialization of
<code>STATIC_MAX_LEVEL</code> by <a
href="https://github.com/ptosi"><code>@​ptosi</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/594">rust-lang/log#594</a></li>
<li>Update docs to 2021 edition, test by <a
href="https://github.com/nyurik"><code>@​nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/577">rust-lang/log#577</a></li>
<li>Add &quot;alterable_logger&quot; link to README.md by <a
href="https://github.com/brummer-simon"><code>@​brummer-simon</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/589">rust-lang/log#589</a></li>
<li>Normalize line ending by <a
href="https://github.com/EFanZh"><code>@​EFanZh</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/602">rust-lang/log#602</a></li>
<li>Remove <code>ok_or</code> in favor of <code>Option::ok_or</code> by
<a
href="https://github.com/AngelicosPhosphoros"><code>@​AngelicosPhosphoros</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/607">rust-lang/log#607</a></li>
<li>Use <code>Acquire</code> ordering for initialization check by <a
href="https://github.com/AngelicosPhosphoros"><code>@​AngelicosPhosphoros</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/610">rust-lang/log#610</a></li>
<li>Get structured logging API ready for stabilization by <a
href="https://github.com/KodrAus"><code>@​KodrAus</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/613">rust-lang/log#613</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/nyurik"><code>@​nyurik</code></a> made
their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/578">rust-lang/log#578</a></li>
<li><a href="https://github.com/dimo414"><code>@​dimo414</code></a> made
their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/590">rust-lang/log#590</a></li>
<li><a href="https://github.com/peterjoel"><code>@​peterjoel</code></a>
made their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/587">rust-lang/log#587</a></li>
<li><a href="https://github.com/ptosi"><code>@​ptosi</code></a> made
their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/594">rust-lang/log#594</a></li>
<li><a
href="https://github.com/brummer-simon"><code>@​brummer-simon</code></a>
made their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/589">rust-lang/log#589</a></li>
<li><a
href="https://github.com/AngelicosPhosphoros"><code>@​AngelicosPhosphoros</code></a>
made their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/607">rust-lang/log#607</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/rust-lang/log/commit/3ccdc286fef3076747fe18a2a93658ea4d4ae012"><code>3ccdc28</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-lang/log/issues/617">#617</a>
from rust-lang/cargo/0.4.21</li>
<li><a
href="https://github.com/rust-lang/log/commit/6153cb289f0e7b80f00ae07dbe5ee41cf3d3fcb0"><code>6153cb2</code></a>
prepare for 0.4.21 release</li>
<li><a
href="https://github.com/rust-lang/log/commit/f0f74946a4bfb02cfc407795a3499c4b69d7a290"><code>f0f7494</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-lang/log/issues/613">#613</a>
from rust-lang/feat/kv-cleanup</li>
<li><a
href="https://github.com/rust-lang/log/commit/2b220bf3b705f2abc0ee591c7eb17972a979da3a"><code>2b220bf</code></a>
clean up structured logging example</li>
<li><a
href="https://github.com/rust-lang/log/commit/646e9ab9917fb79e44b6b36b8375106a1a09766c"><code>646e9ab</code></a>
use original Visitor name for VisitValue</li>
<li><a
href="https://github.com/rust-lang/log/commit/cf85c38d3519745d60e7b891c4b2025050a8389f"><code>cf85c38</code></a>
add needed subfeatures to kv_unstable</li>
<li><a
href="https://github.com/rust-lang/log/commit/73e953905b970ef765a86bf6cbd69bc2c5e2bac4"><code>73e9539</code></a>
fix up capturing of :err</li>
<li><a
href="https://github.com/rust-lang/log/commit/31bb4b0ff36e458c6bef304a336b71f6342ddcc7"><code>31bb4b0</code></a>
move error macros together</li>
<li><a
href="https://github.com/rust-lang/log/commit/ad917118a5e781d0dd60b3a75ba519ce9839ba70"><code>ad91711</code></a>
support field shorthand in macros</li>
<li><a
href="https://github.com/rust-lang/log/commit/90a347bd836873264a393a35bfd90fe478fadae2"><code>90a347b</code></a>
restore removed APIs as deprecated</li>
<li>Additional commits viewable in <a
href="https://github.com/rust-lang/log/compare/0.4.20...0.4.21">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.50 to 2.0.52
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.52</h2>
<ul>
<li>Add an expression parser that uses match-arm's boundary rules (<a
href="https://redirect.github.com/dtolnay/syn/issues/1593">#1593</a>)</li>
</ul>
<h2>2.0.51</h2>
<ul>
<li>Resolve non_local_definitions warnings in generated code under rustc
1.78-nightly</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/07ede6a6b31adeb3a18899ada1f352f63b3a36b9"><code>07ede6a</code></a>
Release 2.0.52</li>
<li><a
href="https://github.com/dtolnay/syn/commit/acbcfbc8c113fa1603469c9ad329d061ee74662e"><code>acbcfbc</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1593">#1593</a>
from dtolnay/boundary</li>
<li><a
href="https://github.com/dtolnay/syn/commit/4924a993dce23abe65128ac318dd662d1e2ceef2"><code>4924a99</code></a>
Add an expression parser that uses match-arm's boundary rules</li>
<li><a
href="https://github.com/dtolnay/syn/commit/e06122bf2cfd31bd7f70304694477dd292fe7e1e"><code>e06122b</code></a>
Resolve unnecessary_get_then_check clippy lint</li>
<li><a
href="https://github.com/dtolnay/syn/commit/018fc5a6298491525387910cb359a9ec618abe54"><code>018fc5a</code></a>
Update test suite to nightly-2024-02-27</li>
<li><a
href="https://github.com/dtolnay/syn/commit/5e15a9b412cb1e2df481e3470e1be8defaee4495"><code>5e15a9b</code></a>
Release 2.0.51</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7e0d4e1f43a879078595f0a3876484a1920ab8f8"><code>7e0d4e1</code></a>
Resolve non_local_definitions warning in debug impls</li>
<li><a
href="https://github.com/dtolnay/syn/commit/8667ad97c1d4e75ac1bb323fb5c7849269814145"><code>8667ad9</code></a>
Ignore module_name_repetitions pedantic clippy lint in codegen</li>
<li><a
href="https://github.com/dtolnay/syn/commit/1fc32000e25bf8fda7371071073f91e012ddf808"><code>1fc3200</code></a>
Update test suite to nightly-2024-02-26</li>
<li><a
href="https://github.com/dtolnay/syn/commit/07a2065576b27dcf0c104f56379cc446d2f3824b"><code>07a2065</code></a>
Update test suite to nightly-2024-02-23</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.50...2.0.52">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.5.1 to 4.5.3
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.5.3</h2>
<h2>[4.5.3] - 2024-03-15</h2>
<h3>Internal</h3>
<ul>
<li><em>(derive)</em> Update <code>heck</code></li>
</ul>
<h2>v4.5.2</h2>
<h2>[4.5.2] - 2024-03-06</h2>
<h3>Fixes</h3>
<ul>
<li><em>(macros)</em> Silence a warning</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.3] - 2024-03-15</h2>
<h3>Internal</h3>
<ul>
<li><em>(derive)</em> Update <code>heck</code></li>
</ul>
<h2>[4.5.2] - 2024-03-06</h2>
<h3>Fixes</h3>
<ul>
<li><em>(macros)</em> Silence a warning</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/4e07b438584bb8a19e37599d4c5b11797bec5579"><code>4e07b43</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8247c7ddf05d8023729ac180d8e8df260f1da5ff"><code>8247c7d</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/677c52ce0870115845a4c42e204f6c049b81a1e7"><code>677c52c</code></a>
chore: Update <code>heck</code> requirement (<a
href="https://redirect.github.com/clap-rs/clap/issues/5396">#5396</a>)</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f65d421607ba16c3175ffe76a20820f123b6c4cb"><code>f65d421</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/886b2729e419114bf42f1a92c66d346c81aa8f33"><code>886b272</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3ba429752fdb19b7a1c2e151c41d5141ad5b9295"><code>3ba4297</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5386">#5386</a>
from amaanq/static-var-name</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2aea9504c4894b3bddf9cd4d2d6cba889307c157"><code>2aea950</code></a>
fix: Use SCREAMING_SNAKE_CASE for static variable
<code>authors</code></li>
<li><a
href="https://github.com/clap-rs/clap/commit/690f5557d7f25904c31ec9f2a3c3657cbb68c98e"><code>690f555</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5382">#5382</a>
from clap-rs/renovate/pre-commit-action-3.x</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a2aa644368ec19026b16b870ec32dc57b325ba9b"><code>a2aa644</code></a>
chore(deps): update compatible (dev) (<a
href="https://redirect.github.com/clap-rs/clap/issues/5381">#5381</a>)</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c233de53c0cca4281f444cf16d16d161bc9c3cab"><code>c233de5</code></a>
chore(deps): update pre-commit/action action to v3.0.1</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/clap_complete-v4.5.1...v4.5.3">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

This PR adds a new PolkaVM-based executor to Substrate.

- The executor can now be used to actually run a PolkaVM-based runtime,
and successfully produces blocks.
- The executor is always compiled-in, but is disabled by default.
- The `SUBSTRATE_ENABLE_POLKAVM` environment variable must be set to `1`
to enable the executor, in which case the node will accept both WASM and
PolkaVM program blobs (otherwise it'll default to WASM-only). This is
deliberately undocumented and not explicitly exposed anywhere (e.g. in
the command line arguments, or in the API) to disincentivize anyone from
enabling it in production. If/when we'll move this into production usage
I'll remove the environment variable and do it "properly".
- I did not use our legacy runtime allocator for the PolkaVM executor,
so currently every allocation inside of the runtime will leak guest
memory until that particular instance is destroyed. The idea here is
that I will work on the https://github.com/polkadot-fellows/RFCs/pull/4
which will remove the need for the legacy allocator under WASM, and that
will also allow us to use a proper non-leaking allocator under PolkaVM.
- I also did some minor cleanups of the WASM executor and deleted some
dead code.

No prdocs included since this is not intended to be an end-user feature,
but an unofficial experiment, and shouldn't affect any current
production user. Once this is production-ready a full Polkadot
Fellowship RFC will be necessary anyway.

Moves [substrate-bip39](https://github.com/paritytech/substrate-bip39)
into substrate. All git history is preserved. Dependencies have been
updated to use the same version as the rest of the repo.

Fixes https://github.com/paritytech/polkadot-sdk/issues/1934.

---------

Co-authored-by: Maciej Hirsz <maciej.hirsz@gmail.com>
Co-authored-by: Maciej Hirsz <1096222+maciejhirsz@users.noreply.github.com>
Co-authored-by: Gav Wood <i@gavwood.com>
Co-authored-by: Stanislav Tkach <stanislav.tkach@gmail.com>
Co-authored-by: Robert Habermeier <rphmeier@gmail.com>
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
Co-authored-by: Demi M. Obenour <demi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: NikVolf <nikvolf@gmail.com>
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: Benjamin Kampmann <ben@gnunicorn.org>
Co-authored-by: Maciej Hirsz <hello@maciej.codes>
Co-authored-by: cheme <emericchevalier.pro@gmail.com>
Co-authored-by: adoerr <0xad@gmx.net>
Co-authored-by: Jun Jiang <jasl9187@hotmail.com>
Co-authored-by: Dan Shields <35669742+NukeManDan@users.noreply.github.com>
Co-authored-by: Michal Kucharczyk <1728078+michalkucharczyk@users.noreply.github.com>

The first step towards
https://github.com/paritytech/polkadot-sdk/issues/3155

Brings all templates under the following structure

```
templates
|   parachain
|   |   polkadot-launch
|   |   runtime              --> parachain-template-runtime
|   |   pallets              --> pallet-parachain-template
|   |   node                 --> parachain-template-node
|   minimal
|   |   runtime              --> minimal-template-runtime
|   |   pallets              --> pallet-minimal-template
|   |   node                 --> minimal-template-node
|   solochain
|   |   runtime              --> solochain-template-runtime
|   |   pallets              --> pallet-template (the naming is not consistent here)
|   |   node                 --> solochain-template-node
```

The only note-worthy changes in this PR are: 

- More `Cargo.toml` fields are forwarded to use the one from the
workspace.
- parachain template now has weights and benchmarks
- adds a shell pallet to the mi...

This MR is the merge of
https://github.com/paritytech/substrate/pull/14414 and
https://github.com/paritytech/substrate/pull/14275. It implements
[RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes
https://github.com/paritytech/polkadot-sdk/issues/198.

----- 

This Merge request introduces three major topicals:

1. Multi-Block-Migrations
1. New pallet `poll` hook for periodic service work
1. Replacement hooks for `on_initialize` and `on_finalize` in cases
where `poll` cannot be used

and some more general changes to FRAME.  
The changes for each topical span over multiple crates. They are listed
in topical order below.

# 1.) Multi-Block-Migrations

Multi-Block-Migrations are facilitated by creating `pallet_migrations`
and configuring `System::Config::MultiBlockMigrator` to point to it.
Executive picks this up and triggers one step of the migrations pallet
per block.
The chain is in lockdown mode for as long as an MBM is ongoing.
Executive does this by polling `MultiBlockMigrator::ongoing` and not
allowing any transaction in a block, if true.

A MBM is defined through trait `SteppedMigration`. A condensed version
looks like this:
```rust
/// A migration that can proceed in multiple steps.
pub trait SteppedMigration {
	type Cursor: FullCodec + MaxEncodedLen;
	type Identifier: FullCodec + MaxEncodedLen;

	fn id() -> Self::Identifier;

	fn max_steps() -> Option<u32>;

	fn step(
		cursor: Option<Self::Cursor>,
		meter: &mut WeightMeter,
	) -> Result<Option<Self::Cursor>, SteppedMigrationError>;
}
```

`pallet_migrations` can be configured with an aggregated tuple of these
migrations. It then starts to migrate them one-by-one on the next
runtime upgrade.
Two things are important here:
- 1. Doing another runtime upgrade while MBMs are ongoing is not a good
idea and can lead to messed up state.
- 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`,
otherwise it is not used.**

The pallet supports an `UpgradeStatusHandler` that can be used to notify
external logic of upgrade start/finish (for example to pause XCM
dispatch).

Error recovery is very limited in the case that a migration errors or
times out (exceeds its `max_steps`). Currently the runtime dev can
decide in `FailedMigrationHandler::failed` how to handle this. One
follow-up would be to pair this with the `SafeMode` pallet and enact
safe mode when an upgrade fails, to allow governance to rescue the
chain. This is currently not possible, since governance is not
`Mandatory`.

## Runtime API

- `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to
inform the Block Author whether they can push transactions.

### Integration

Add it to your runtime implementation of `Core` and `BlockBuilder`:
```patch
diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs
@@ impl_runtime_apis! {
	impl sp_block_builder::Core<Block> for Runtime {
-		fn initialize_block(header: &<Block as BlockT>::Header) {
+		fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode {
			Executive::initialize_block(header)
		}

		...
	}
```

# 2.) `poll` hook

A new pallet hook is introduced: `poll`. `Poll` is intended to replace
mostly all usage of `on_initialize`.
The reason for this is that any code that can be called from
`on_initialize` cannot be migrated through an MBM. Currently there is no
way to statically check this; the implication is to use `on_initialize`
as rarely as possible.
Failing to do so can result in broken storage invariants.

The implementation of the poll hook depends on the `Runtime API` changes
that are explained above.

# 3.) Hard-Deadline callbacks

Three new callbacks are introduced and configured on `System::Config`:
`PreInherents`, `PostInherents` and `PostTransactions`.
These hooks are meant as replacement for `on_initialize` and
`on_finalize` in cases where the code that runs cannot be moved to
`poll`.
The reason for this is to make the usage of HD-code (hard deadline) more
explicit - again to prevent broken invariants by MBMs.

# 4.) FRAME (general changes)

## `frame_system` pallet

A new memorize storage item `InherentsApplied` is added. It is used by
executive to track whether inherents have already been applied.
Executive and can then execute the MBMs directly between inherents and
transactions.

The `Config` gets five new items:
- `SingleBlockMigrations` this is the new way of configuring migrations
that run in a single block. Previously they were defined as last generic
argument of `Executive`. This shift is brings all central configuration
about migrations closer into view of the developer (migrations that are
configured in `Executive` will still work for now but is deprecated).
- `MultiBlockMigrator` this can be configured to an engine that drives
MBMs. One example would be the `pallet_migrations`. Note that this is
only the engine; the exact MBMs are injected into the engine.
- `PreInherents` a callback that executes after `on_initialize` but
before inherents.
- `PostInherents` a callback that executes after all inherents ran
(including MBMs and `poll`).
- `PostTransactions` in symmetry to `PreInherents`, this one is called
before `on_finalize` but after all transactions.

A sane default is to set all of these to `()`. Example diff suitable for
any chain:
```patch
@@ impl frame_system::Config for Test {
 	type MaxConsumers = ConstU32<16>;
+	type SingleBlockMigrations = ();
+	type MultiBlockMigrator = ();
+	type PreInherents = ();
+	type PostInherents = ();
+	type PostTransactions = ();
 }
```

An overview of how the block execution now looks like is here. The same
graph is also in the rust doc.

<details><summary>Block Execution Flow</summary>
<p>

![Screenshot 2023-12-04 at 19 11
29](https://github.com/paritytech/polkadot-sdk/assets/10380170/e88a80c4-ef11-4faa-8df5-8b33a724c054)

</p>
</details> 

## Inherent Order

Moved to https://github.com/paritytech/polkadot-sdk/pull/2154

---------------


## TODO

- [ ] Check that `try-runtime` still works
- [ ] Ensure backwards compatibility with old Runtime APIs
- [x] Consume weight correctly
- [x] Cleanup

---------

Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Juan Girini <juangirini@gmail.com>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: Gavin Wood <gavin@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>

Closes https://github.com/paritytech/polkadot-sdk-docs/issues/55

- Changes 'current storage version' terminology to less ambiguous
'in-code storage version' (suggestion by @ggwpez

)
- Adds a new example pallet `pallet-example-single-block-migrations`
- Adds a new reference doc to replace
https://docs.substrate.io/maintain/runtime-upgrades/ (temporarily living
in the pallet while we wait for developer hub PR to merge)
- Adds documentation for the `storage_alias` macro
- Improves `trait Hooks` docs 
- Improves `trait GetStorageVersion` docs
- Update the suggested patterns for using `VersionedMigration`, so that
version unchecked migrations are never exported
- Prevents accidental usage of version unchecked migrations in runtimes

https://github.com/paritytech/substrate/pull/14421#discussion_r1255467895
- Unversioned migration code is kept inside `mod version_unchecked`,
versioned code is kept in `pub mod versioned`
- It is necessary to use modules to limit visibility because the inner
migration must be `pub`. See
https://github.com/rust-lang/rust/issues/30905 and

https://internals.rust-lang.org/t/lang-team-minutes-private-in-public-rules/4504/40
for more.

### todo

- [x] move to reference docs to proper place within sdk-docs (now that
https://github.com/paritytech/polkadot-sdk/pull/2102 is merged)
- [x] prdoc

---------

Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: Juan <juangirini@gmail.com>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: command-bot <>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>

# Runtime side for PoV Reclaim

## Implementation Overview
- Hostfunction to fetch the storage proof size has been added to the
PVF. It uses the size tracking recorder that was introduced in my
previous PR.
- Mechanisms to use the reclaim HostFunction have been introduced.
- 1. A SignedExtension that checks the node-reported proof size before
and after application of an extrinsic. Then it reclaims the difference.
- 2. A manual helper to make reclaiming easier when manual interaction
is required, for example in `on_idle` or other hooks.
- In order to utilize the manual reclaiming, I modified `WeightMeter` to
support the reduction of consumed weight, at least for storage proof
size.

## How to use
To enable the general functionality for a parachain:
1. Add the SignedExtension to your parachain runtime. 
2. Provide the HostFunction to the node
3. Enable proof recording during block import

## TODO
- [x] PRDoc

---------

Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Davide Galassi <davxy@datawok.net>
Co-authored-by: Bastian Köcher <git@kchr.de>

Bumps the known_good_semver group with 5 updates:

| Package | From | To |
| --- | --- | --- |
| [serde](https://github.com/serde-rs/serde) | `1.0.196` | `1.0.197` |
| [serde_json](https://github.com/serde-rs/json) | `1.0.113` | `1.0.114`
|
| [syn](https://github.com/dtolnay/syn) | `2.0.49` | `2.0.50` |
| [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.31` |
`0.9.32` |
| [serde_derive](https://github.com/serde-rs/serde) | `1.0.196` |
`1.0.197` |

Updates `serde` from 1.0.196 to 1.0.197
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.197</h2>
<ul>
<li>Fix unused_imports warnings when compiled by rustc 1.78</li>
<li>Optimize code size of some Display impls (<a
href="https://redirect.github.com/serde-rs/serde/issues/2697">#2697</a>,
thanks <a
href="https://github.com/nyurik"><code>@​nyurik</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/5fa711d75d91173aafc6019e03cf8af6ac9ba7b2"><code>5fa711d</code></a>
Release 1.0.197</li>
<li><a
href="https://github.com/serde-rs/serde/commit/f5d8ae423aa195d3423029ff5a618266cc8ff9a5"><code>f5d8ae4</code></a>
Resolve prelude redundant import warnings</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1d54973b928bd8708a4ad2d90fca1203367ff580"><code>1d54973</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2697">#2697</a>
from nyurik/format-str</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b8fafefd8588f84af54329945fab701ec414281d"><code>b8fafef</code></a>
A few minor <code>write_str</code> optimizations and inlining</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c42ebb8839fbd92dbda6729e8363c8d683f26306"><code>c42ebb8</code></a>
Update ui test suite to nightly-2024-02-12</li>
<li><a
href="https://github.com/serde-rs/serde/commit/9e680620b595724a6abfb8e785155d02482f911a"><code>9e68062</code></a>
Ignore incompatible_msrv clippy lint for conditionally compiled
code</li>
<li><a
href="https://github.com/serde-rs/serde/commit/846f865de2e94408e0edc6a2c6863c063cd234be"><code>846f865</code></a>
Ignore dead_code warnings in test</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.196...v1.0.197">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.113 to 1.0.114
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.114</h2>
<ul>
<li>Fix unused_imports warnings when compiled by rustc 1.78</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/e1b3a6d8a161ff5ec4865b487d148c17d0188e3e"><code>e1b3a6d</code></a>
Release 1.0.114</li>
<li><a
href="https://github.com/serde-rs/json/commit/6fb70262e894168ac631b2232a1b7b3a7781ebe5"><code>6fb7026</code></a>
Work around prelude redundant import warnings</li>
<li><a
href="https://github.com/serde-rs/json/commit/34a04c5f7febdf80e05743e38d5cb1880a83b6f6"><code>34a04c5</code></a>
Ignore incompatible_msrv clippy false positives in test</li>
<li><a
href="https://github.com/serde-rs/json/commit/ca05f69943e18d70c2219ea41fcb67f2849b7eed"><code>ca05f69</code></a>
Remove unused Float::is_sign_negative trait method</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.113...v1.0.114">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.49 to 2.0.50
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.50</h2>
<ul>
<li>Fix unused_imports warnings when compiled by rustc 1.78</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/0dae01509e1dfc1734b0e8097c16338b56503242"><code>0dae015</code></a>
Release 2.0.50</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2b493c34211a605a84eb5f1618e49818f8b654e6"><code>2b493c3</code></a>
Update location of Pat variant aliases</li>
<li><a
href="https://github.com/dtolnay/syn/commit/07a435df6739d47d54e933970eddfc6764bd519d"><code>07a435d</code></a>
Fix doc links now that crate::* is no longer imported</li>
<li><a
href="https://github.com/dtolnay/syn/commit/713f932b85698b1b2d561cc98e5b6f9643c9afde"><code>713f932</code></a>
Eliminate glob imports</li>
<li><a
href="https://github.com/dtolnay/syn/commit/6eb82a997589cf9c5b2bb36716443a19c4440c5e"><code>6eb82a9</code></a>
Eliminate glob imports from codegen</li>
<li><a
href="https://github.com/dtolnay/syn/commit/896a7306ee36a4c7dc96e1bf61e247e53df47179"><code>896a730</code></a>
Eliminate glob imports from examples</li>
<li><a
href="https://github.com/dtolnay/syn/commit/866c80ce2f39e8e2e723bb5440fdd58e4e1de3b6"><code>866c80c</code></a>
Update test suite to nightly-2024-02-18</li>
<li><a
href="https://github.com/dtolnay/syn/commit/d4b499e3907295a7173fbc6f8ca34388583795f6"><code>d4b499e</code></a>
Update test suite to nightly-2024-02-17</li>
<li><a
href="https://github.com/dtolnay/syn/commit/38956e60405920fdf856a0128a804460913c8c0c"><code>38956e6</code></a>
Update test suite to nightly-2024-02-16</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.49...2.0.50">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.31 to 0.9.32
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.32</h2>
<ul>
<li>Fix unused_imports warnings when compiled by rustc 1.78</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/ea57d8cdeb6b2d0060aaeec6c934d0f494722765"><code>ea57d8c</code></a>
Release 0.9.32</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/a52b7ac3f42aad7f587409d2e431ed2fe5db7b31"><code>a52b7ac</code></a>
Resolve prelude redundant import warnings</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/9e0b8d337b1c19fe250454da3bce9fc12b6cd634"><code>9e0b8d3</code></a>
Replace curly quotes with ascii straight quotes</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.31...0.9.32">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_derive` from 1.0.196 to 1.0.197
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde_derive's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.197</h2>
<ul>
<li>Fix unused_imports warnings when compiled by rustc 1.78</li>
<li>Optimize code size of some Display impls (<a
href="https://redirect.github.com/serde-rs/serde/issues/2697">#2697</a>,
thanks <a
href="https://github.com/nyurik"><code>@​nyurik</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/5fa711d75d91173aafc6019e03cf8af6ac9ba7b2"><code>5fa711d</code></a>
Release 1.0.197</li>
<li><a
href="https://github.com/serde-rs/serde/commit/f5d8ae423aa195d3423029ff5a618266cc8ff9a5"><code>f5d8ae4</code></a>
Resolve prelude redundant import warnings</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1d54973b928bd8708a4ad2d90fca1203367ff580"><code>1d54973</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2697">#2697</a>
from nyurik/format-str</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b8fafefd8588f84af54329945fab701ec414281d"><code>b8fafef</code></a>
A few minor <code>write_str</code> optimizations and inlining</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c42ebb8839fbd92dbda6729e8363c8d683f26306"><code>c42ebb8</code></a>
Update ui test suite to nightly-2024-02-12</li>
<li><a
href="https://github.com/serde-rs/serde/commit/9e680620b595724a6abfb8e785155d02482f911a"><code>9e68062</code></a>
Ignore incompatible_msrv clippy lint for conditionally compiled
code</li>
<li><a
href="https://github.com/serde-rs/serde/commit/846f865de2e94408e0edc6a2c6863c063cd234be"><code>846f865</code></a>
Ignore dead_code warnings in test</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.196...v1.0.197">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Lifting some more dependencies to the workspace. Just using the
most-often updated ones for now.
It can be reproduced locally.

```sh
# First you can check if there would be semver incompatible bumps (looks good in this case):
$ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"

# Then apply the changes:
$ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix

# And format the changes:
$ taplo format --config .config/taplo.toml
```

---------

Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>

Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
- Set log to `0.4.20` everywhere
- Lift `log` to the workspace

Starting with a simpler one after seeing
https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw

.
This sets the `default-features` to `false` in the root and then
overwrites that in each create to its original value. This is necessary
since otherwise the `default` features are additive and its impossible
to disable them in the crate again once they are enabled in the
workspace.

I am using a tool to do this, so its mostly a test to see that it works
as expected.

---------

Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>

Closes #169  

Fork of the `orml-parameters-pallet` as introduced by
https://github.com/open-web3-stack/open-runtime-module-library/pull/927
(cc @xlc)
It greatly changes how the macros work, but keeps the pallet the same.
The downside of my code is now that it does only support constant keys
in the form of types, not value-bearing keys.
I think this is an acceptable trade off, give that it can be used by
*any* pallet without any changes.

The pallet allows to dynamically set parameters that can be used in
pallet configs while also restricting the updating on a per-key basis.
The rust-docs contains a complete example.

Changes:
- Add `parameters-pallet`
- Use in the kitchensink as demonstration
- Add experimental attribute to define dynamic params in the runtime.
- Adding a bunch of traits to `frame_support::traits::dynamic_params`
that can be re-used by the ORML macros

## Example

First to define the parameters in the runtime file. The syntax is very
explicit about the codec index and errors if there is no.
```rust
#[dynamic_params(RuntimeParameters, pallet_parameters::Parameters::<Runtime>))]
pub mod dynamic_params {
	use super::*;

	#[dynamic_pallet_params]
	#[codec(index = 0)]
	pub mod storage {
		/// Configures the base deposit of storing some data.
		#[codec(index = 0)]
		pub static BaseDeposit: Balance = 1 * DOLLARS;

		/// Configures the per-byte deposit of storing some data.
		#[codec(index = 1)]
		pub static ByteDeposit: Balance = 1 * CENTS;
	}

	#[dynamic_pallet_params]
	#[codec(index = 1)]
	pub mod contracts {
		#[codec(index = 0)]
		pub static DepositPerItem: Balance = deposit(1, 0);

		#[codec(index = 1)]
		pub static DepositPerByte: Balance = deposit(0, 1);
	}
}
```

Then the pallet is configured with the aggregate:  
```rust
impl pallet_parameters::Config for Runtime {
	type AggregratedKeyValue = RuntimeParameters;
	type AdminOrigin = EnsureRootWithSuccess<AccountId, ConstBool<true>>;
	...
}
```

And then the parameters can be used in a pallet config:
```rust
impl pallet_preimage::Config for Runtime {
	type DepositBase = dynamic_params::storage::DepositBase;
}
```

A custom origin an be defined like this:  
```rust
pub struct DynamicParametersManagerOrigin;

impl EnsureOriginWithArg<RuntimeOrigin, RuntimeParametersKey> for DynamicParametersManagerOrigin {
	type Success = ();

	fn try_origin(
		origin: RuntimeOrigin,
		key: &RuntimeParametersKey,
	) -> Result<Self::Success, RuntimeOrigin> {
		match key {
			RuntimeParametersKey::Storage(_) => {
				frame_system::ensure_root(origin.clone()).map_err(|_| origin)?;
				return Ok(())
			},
			RuntimeParametersKey::Contract(_) => {
				frame_system::ensure_root(origin.clone()).map_err(|_| origin)?;
				return Ok(())
			},
		}
	}

	#[cfg(feature = "runtime-benchmarks")]
	fn try_successful_origin(_key: &RuntimeParametersKey) -> Result<RuntimeOrigin, ()> {
		Ok(RuntimeOrigin::Root)
	}
}
```

---------

Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Nikhil Gupta <17176722+gupnik@users.noreply.github.com>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: command-bot <>

This PR improves compatibility with RISC-V and PolkaVM, allowing more
runtimes to successfully compile.

In particular, it makes the following changes:

- The `sp-mmr-primitives` and `sp-consensus-beefy` crates
unconditionally required an `std`-only dependency; now they only require
those dependencies when the `std` feature is actually enabled. (Our
RISC-V target is, unlike WASM, a true `no_std` target where you can't
accidentally use stuff from `std` anymore.)
- One of our dependencies (the `bitvec` trace) uses a crate called
`radium` which doesn't compile under RISC-V due to incomplete
autodetection logic in their `build.rs` file. The good news is that this
is already fixed in the newest upstream version of `radium`, and the
newest version of `bitvec` uses it. The bad news is that the newest
version of `bitvec` is not currently released on crates.io, so we can't
use it. I've [created an
issue](https://github.com/ferrilab/ferrilab/issues/5) asking for a new
release, but in the meantime I forked the currently used `radium` 0.7,
[fixed the faulty
logic](https://github.com/paritytech/radium-0.7-fork/commit/ed66c8a294b138c67f93499644051d97d4c7fbda)
and used cargo's patching capabilities to use it for the RISC-V runtime
builds. This might be a little hacky, but it is the least intrusive way
to fix the problem, doesn't affect WASM builds at all, and we can
trivially remove it once a new `bitvec` is released.
- The new runtimes are added to the CI to make sure their compilation
doesn't break.

This PR adds initial support for building RISC-V runtimes targeting
PolkaVM.

- Setting the `SUBSTRATE_RUNTIME_TARGET=riscv` environment variable will
now build a RISC-V runtime instead of a WASM runtime.
- This only adds support for *building* runtimes; running them will need
a PolkaVM-based executor, which I will add in a future PR.
- Only building the minimal runtime is supported (building the Polkadot
runtime doesn't work *yet* due to one of the dependencies).
- The builder now sets a `substrate_runtime` cfg flag when building the
runtimes, with the idea being that instead of doing `#[cfg(not(feature =
"std"))]` or `#[cfg(target_arch = "wasm32")]` to detect that we're
building a runtime you'll do `#[cfg(substrate_runtime)]`. (Switching the
whole codebase to use this will be done in a future PR; I deliberately
didn't do this here to keep this PR minimal and reviewable.)
- Further renaming of things (e.g. types, environment variables and proc
macro attributes having "wasm" in their name) to be target-agnostic will
also be done in a future refactoring PR (while keeping backwards
compatibility where it makes sense; I don't intend to break anyone's
workflow or create unnecessary churn).
- This PR also fixes two bugs in the `wasm-builder` crate:
* The `RUSTC` environment variable is now removed when invoking the
compiler. This prevents the toolchain version from being overridden when
called from a `build.rs` script.
* When parsing the `rustup toolchain list` output the `(default)` is now
properly stripped and not treated as part of the version.
- I've also added a minimal CI job that makes sure this doesn't break in
the future. (cc @paritytech/ci)

cc @athei



------

Also, just a fun little tidbit: quickly comparing the size of the built
runtimes it seems that the PolkaVM runtime is slightly smaller than the
WASM one. (`production` build, with the `names` section substracted from
the WASM's size to keep things fair, since for the PolkaVM runtime we're
currently stripping out everything)

- `.wasm`: 625505 bytes
- `.wasm` (after wasm-opt -O3): 563205 bytes
- `.wasm` (after wasm-opt -Os): 562987 bytes
- `.wasm` (after wasm-opt -Oz): 536852 bytes
- `.polkavm`: ~~580338 bytes~~ 550476 bytes (after enabling extra target
features; I'll add those in another PR once we have an executor working)

---------

Co-authored-by: Bastian Köcher <git@kchr.de>

Removes the `bridges/snowbridge/parachain` directory and moves
everything up to under `snowbridge` directly. We are cleaning up our
local dev env after merging our crates into the polkadot-sdk.

---------

Co-authored-by: claravanstaden <Cats 4 life!>

Changes:
- Add three missing crates to the workspace

<s>claravanstaden are these two snowbridge crates supposed to go into
the workspace?</s> 
@alvicsam

 can you please make the `Check workspace` required?

Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>

#2970 accidentally added a crate twice to the workspace. Now extending
the workspace check to explicitly error then.

I think the check should also be required now.

---------

Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>

Bumps the known_good_semver group with 1 update:
[serde_yaml](https://github.com/dtolnay/serde-yaml).

Updates `serde_yaml` from 0.9.27 to 0.9.30
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.30</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
<h2>0.9.29</h2>
<ul>
<li>Turn on <code>deny(unsafe_op_in_unsafe_fn)</code> lint</li>
</ul>
<h2>0.9.28</h2>
<ul>
<li>Update <code>unsafe-libyaml</code> dependency to pull in unaligned
write fix</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a>
Release 0.9.30</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a>
Remove option_if_let_else clippy suppression</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/b957d2b15d7f3d96279997800fa0610b41b8fe00"><code>b957d2b</code></a>
Release 0.9.29</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/007fc2d5c1987847a0f1ac95885c56f8e6e5f808"><code>007fc2d</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/401">#401</a>
from dtolnay/unsafeop</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/5bac2475b0017d6a635d641df17165d71b951f0e"><code>5bac247</code></a>
Fill in unsafe blocks inside unsafe functions</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/0f6dba18ab8db598c4963e9242afd490ee0202f0"><code>0f6dba1</code></a>
Turn on deny(unsafe_op_in_unsafe_fn)</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/1b6e44837f0db0a1c15537311fed3579a7e8c6d2"><code>1b6e448</code></a>
Release 0.9.28</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/ec1a3145d7b6b809f7b3aa2d9dcd7db30f0588d4"><code>ec1a314</code></a>
Force unsafe-libyaml version that contains unaligned write fix</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.27...0.9.30">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=serde_yaml&package-manager=cargo&previous-version=0.9.27&new-version=0.9.30)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

---------

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <git@kchr.de>

---------

Signed-off-by: Andrei Sandu <andrei-mihail@parity.io>

Add subsystem benchmarks for `availability-distribution` and `biftield-distribution` (availability write) (#2970)

Introduce a new test objective : `DataAvailabilityWrite`.

The new benchmark measures the network and cpu usage of
`availability-distribution`, `biftield-distribution` and
`availability-store` subsystems from the perspective of a validator node
during the process when candidates are made available.

Additionally I refactored the networking emulation to support bandwidth
acounting and limits of incoming and outgoing requests.

Screenshot of succesful run


<img width="1293" alt="Screenshot 2024-01-17 at 19 17 44"
src="https://github.com/paritytech/polkadot-sdk/assets/54316454/fde11280-e25b-4dc3-9dc9-d4b9752f9b7a">

---------

Signed-off-by: Andrei Sandu <andrei-mihail@parity.io>

## Summary

This PR consolidates `pallet-state-trie-migration` as a part of
https://github.com/paritytech/polkadot-sdk/issues/226 /
https://github.com/paritytech/polkadot-sdk/issues/171:

`pallet-state-trie-migration`:
- [x] replace `Currency` with `fungible` traits
- [x] run benchmarks
- [x] refactor to `DefaultConfig`

`pallet_nicks`:
- [x]  remove

others:
- [x] remove `as Fn*` or `asFun*` stuff based on discussion
[here](https://github.com/paritytech/polkadot-sdk/issues/226#issuecomment-1822861445)

---------

Co-authored-by: Richard Melkonian <35300528+0xmovses@users.noreply.github.com>
Co-authored-by: command-bot <>

Step towards https://github.com/paritytech/polkadot-sdk/issues/1975

As reported
https://github.com/paritytech/polkadot-sdk/issues/1975#issuecomment-1774534225
I'd like to encapsulate crypto related stuff in a dedicated folder.

Currently all cryptographic primitive wrappers are all sparsed in
`substrate/core` which contains "misc core" stuff.

To simplify the process, as the first step with this PR I propose to
move the cryptographic hashing there.

The `substrate/crypto` folder was already created to contains `ec-utils`
crate.

Notes:
- rename `sp-core-hashing` to `sp-crypto-hashing`
- rename `sp-core-hashing-proc-macro` to `sp-crypto-hashing-proc-macro`
- As the crates name is changed I took the freedom to restart fresh from
version 0.1.0 for both crates

---------

Co-authored-by: Robert Hambrock <roberthambrock@gmail.com>

Changes:
- add missing member to the workspace
- add CI script after the last attempt to merge it upstream failed
https://github.com/paritytech/pipeline-scripts/pull/105

Two crates are excluded from the check since they are templates
`substrate/frame/contracts/fixtures/build` and
 `substrate/frame/contracts/fixtures/contracts/common`.

Hopefully this is the last time that some crates need to be added
manually.

![meme](https://github.com/paritytech/polkadot-sdk/assets/10380170/984843ee-1c76-4126-a4fc-ff2ba1d47377)

---------

Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>

- updates snowbridge crates to `0.9.0`
- updates Cargo.toml files in preparation for publishing to crates.io
- adds Kusama and Polkadot Snowbridge runtime config crates
- moves runtime tests from the Snowbridge subtree into the bridge hub
tests dir

---------

Co-authored-by: claravanstaden <Cats 4 life!>
Co-authored-by: Ron <yrong1997@gmail.com>

This splits `cumulus-primitives-parachain-inherent` into two crates, the
previous `cumulus-primitives-parachain-inherent` and a new
`cumulus-client-parachain-inherent`. The idea behind this is to move the
`create_at` logic into the client crate. This removes quite a lot of
unrelated dependencies from the runtime std build and thus, makes the
compilation faster. On my Laptop the compilation is goes down by one
minute for `asset-hub-rococo-runtime`. I also assume that the full build
of the entire workspace probably can be speed-up a little bit, because
more stuff can be compiled in parallel.

---------

Co-authored-by: command-bot <>

Follow up from #2347 this time to verify that fixtures build to RISC-V

---------

Co-authored-by: alvicsam <alvicsam@gmail.com>
Co-authored-by: Alexander Samusev <41779041+alvicsam@users.noreply.github.com>
Co-authored-by: Alexander Theißen <alex.theissen@me.com>

Rococo and Westend runtimes for the "People Chain". This chain contains
the Identity pallet with plans to migrate all related data from the
Relay Chain.

Changes `IdentityInfo` to:

- Remove `additional_fields`.
- Add `github` and `discord` as first class fields. From scraping chain
data, these were the only two additional fields used (for the Fellowship
and Ambassador Program, respectively).
- Rename `riot` to `matrix`.

Note: This will use the script in
https://github.com/paritytech/polkadot-sdk/pull/2025 to generate the
genesis state.

TODO:

- [x] https://github.com/paritytech/polkadot-sdk/pull/1814 and
integration of the Identity Migrator pallet for migration.
- [x] Tests: https://github.com/paritytech/polkadot-sdk/pull/2373

---------

Co-authored-by: Muharem <ismailov.m.h@gmail.com>
Co-authored-by: Michal Kucharczyk <1728078+michalkucharczyk@users.noreply.github.com>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: Richard Melkonian <35300528+0xmovses@users.noreply.github.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>

# Description

Adds Snowbridge to the Rococo bridge hub runtime. Includes config
changes required in Rococo asset hub.

---------

Co-authored-by: Alistair Singh <alistair.singh7@gmail.com>
Co-authored-by: ron <yrong1997@gmail.com>
Co-authored-by: Vincent Geddes <vincent.geddes@hey.com>
Co-authored-by: claravanstaden <Cats 4 life!>

Many clippy lints usually enforced by `-Dcomplexity` and `-Dcorrectness`
are not caught by CI as they are gated by `features`, like
`runtime-benchmarks`, while the clippy CI job runs with only the default
features for all targets.

This PR also adds a CI step to run clippy with `--all-features` to
ensure the code quality is maintained behind feature gates from now on.

To improve local development, clippy lints are downgraded to warnings,
but they still will result in an error at CI due to the `-Dwarnings`
rustflag.

---------

Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>