Skip to content
  1. Oct 15, 2023
  3. Oct 14, 2023
  5. Oct 11, 2023
  7. Oct 10, 2023
    • Sam Johnson's avatar
      upgrade to macro_magic 0.4.3 (#1832) · 5adcb3e1
      Sam Johnson authored 
      # Description

Upgrades `macro_magic` to 0.4.3, which introduces the ability to have
`export_tokens` use the same name as the underlying item for its
auto-generated macro name. Ultimately this will allow for better dev ux
in our derive_impl feature.
      5adcb3e1
    • Liam Aharon's avatar
      remote-ext: fix state download stall on slow connections and reduce memory usage (#1295) · 55f35442
      Liam Aharon authored 
      Original PR https://github.com/paritytech/substrate/pull/14746

---

## Fixing stall

### Introduction
I experienced an apparent stall downloading state from
`https://rococo-try-runtime-node.parity-chains.parity.io:443` which was
having networking difficulties only responding to my JSONRPC requests
with 50-200KB/s of bandwidth.

This PR fixes the issue causing the stall, and generally improves
performance remote-ext when it downloads state by greatly reducing the
chances of a timeout occuring.

### Description
Introduces a new `REQUEST_DURATION_TARGET` constant and modifies
`get_storage_data_dynamic_batch_size` to

- Increase or decrease the batch size of the next request depending on
whether the elapsed time of the last request was gt or lt the target
- Reset the batch size to 1 if the request times out

This fixes an issue on slow connections that can otherwise cause
multiple timeouts and a stalled download when:

1. The batch size increases rapidly as remote-ext downloads keys with
small associated storage values
2. remote-ext tries to process a large series of subsequent keys all
with extremely large associated storage values (Rococo has a series of
keys 1-5MB large)
3. The huge storage values download for 5 minutes until the request
times out
4. The partially downloaded keys are thrown out and remote-ext tries
again with a smaller batch size, but the batch size is still far too
large and takes 5 minutes to be reduced again
5. The download will be essentially stalled for many hours while the
above step cycles


After this PR, the request size will

- Not grow as large to begin with, as it is regulated downwards as the
request duration exceeds the target
- Drop immediately to 1 if the request times out. A timeout indicates
the keys next in line to download have extremely large storage values
compared to previously downloaded keys, and we need to reset the batch
size to figure out what our new ideal batch size is. By not resetting
down to 1, we risk the next request timing out again.

## Reducing memory

As suggested by @bkchr, I adjusted `get_storage_data_dynamic_batch_size`
from being recursive to a loop which allows removing a bunch of clones
that were chewing through a lot of memory. I noticed actually it was
using up to 50GB swap previously when downloading Polkadot keys on a
slow connection, because it needed to recurse and clone a lot.

After this change it uses only ~1.5GB memory.
      55f35442
    • Oliver Tale-Yazdi's avatar
      [FRAME] Warn on unchecked weight witness (#1818) · 64877492
      Oliver Tale-Yazdi authored 
      Adds a warning to FRAME pallets when a function argument that starts
with `_` is used in the weight formula.
This is in most cases an error since the weight witness needs to be
checked.

Example:

```rust
#[pallet::call_index(0)]
#[pallet::weight(T::SystemWeightInfo::remark(_remark.len() as u32))]
pub fn remark(_origin: OriginFor<T>, _remark: Vec<u8>) -> DispatchResultWithPostInfo {
	Ok(().into())
}
```

Produces this warning:

```pre
warning: use of deprecated constant `pallet::warnings::UncheckedWeightWitness_0::_w`: 
                 It is deprecated to not check weight witness data.
                 Please instead ensure that all witness data for weight calculation is checked before usage.
         
                 For more info see:
                     <https://github.com/paritytech/polkadot-sdk/pull/1818>
   --> substrate/frame/system/src/lib.rs:424:40
    |
424 |         pub fn remark(_origin: OriginFor<T>, _remark: Vec<u8>) -> DispatchResultWithPostInfo {
    |                                              ^^^^^^^
    |
    = note: `#[warn(deprecated)]` on by default
```

Can be suppressed like this, since in this case it is legit:

```rust
#[pallet::call_index(0)]
#[pallet::weight(T::SystemWeightInfo::remark(remark.len() as u32))]
pub fn remark(_origin: OriginFor<T>, remark: Vec<u8>) -> DispatchResultWithPostInfo {
	let _ = remark; // We dont need to check the weight witness.
	Ok(().into())
}
```

Changes:
- Add warning on uncheded weight witness
- Respect `subkeys` limit in `System::kill_prefix`
- Fix HRMP pallet and other warnings
- Update`proc_macro_warning` dependency
- Delete random folder `substrate/src/src` 🙈

 
- Adding Prdoc

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarjoe petrowski <[email protected]>
      64877492
  9. Oct 09, 2023
    • David Emett's avatar
      Mixnet integration (#1346) · a808a3a0
      David Emett authored 
      See #1345, <https://github.com/paritytech/substrate/pull/14207

>.

This adds all the necessary mixnet components, and puts them together in
the "kitchen-sink" node/runtime. The components added are:

- A pallet (`frame/mixnet`). This is responsible for determining the
current mixnet session and phase, and the mixnodes to use in each
session. It provides a function that validators can call to register a
mixnode for the next session. The logic of this pallet is very similar
to that of the `im-online` pallet.
- A service (`client/mixnet`). This implements the core mixnet logic,
building on the `mixnet` crate. The service communicates with other
nodes using notifications sent over the "mixnet" protocol.
- An RPC interface. This currently only supports sending transactions
over the mixnet.

---------

Co-authored-by: default avatarDavid Emett <[email protected]>
Co-authored-by: default avatarJavier Viola <[email protected]>
      a808a3a0
  11. Oct 07, 2023
    • Muharem Ismailov's avatar
      Treasury spends various asset kinds (#1333) · cb944dc5
      Muharem Ismailov authored 
      

### Summary 

This PR introduces new dispatchables to the treasury pallet, allowing
spends of various asset types. The enhanced features of the treasury
pallet, in conjunction with the asset-rate pallet, are set up and
enabled for Westend and Rococo.

### Westend and Rococo runtimes.

Polkadot/Kusams/Rococo Treasury can accept proposals for `spends` of
various asset kinds by specifying the asset's location and ID.

#### Treasury Instance New Dispatchables:
- `spend(AssetKind, AssetBalance, Beneficiary, Option<ValidFrom>)` -
propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

in this context, the `AssetKind` parameter contains the asset's location
and it's corresponding `asset_id`, for example:
`USDT` on `AssetHub`,
``` rust
location = MultiLocation(0, X1(Parachain(1000)))
asset_id = MultiLocation(0, X2(PalletInstance(50), GeneralIndex(1984)))
```

the `Beneficiary` parameter is a `MultiLocation` in the context of the
asset's location, for example
``` rust
// the Fellowship salary pallet's location / account
FellowshipSalaryPallet = MultiLocation(1, X2(Parachain(1001), PalletInstance(64)))
// or custom `AccountId`
Alice = MultiLocation(0, AccountId32(network: None, id: [1,...]))
```

the `AssetBalance` represents the amount of the `AssetKind` to be
transferred to the `Beneficiary`. For permission checks, the asset
amount is converted to the native amount and compared against the
maximum spendable amount determined by the commanding spend origin.

the `spend` dispatchable allows for batching spends with different
`ValidFrom` arguments, enabling milestone-based spending. If the
expectations tied to an approved spend are not met, it is possible to
void the spend later using the `void_spend` dispatchable.

Asset Rate Pallet provides the conversion rate from the `AssetKind` to
the native balance.

#### Asset Rate Instance Dispatchables:
- `create(AssetKind, Rate)` - initialize a conversion rate to the native
balance for the given asset
- `update(AssetKind, Rate)` - update the conversion rate to the native
balance for the given asset
- `remove(AssetKind)` - remove an existing conversion rate to the native
balance for the given asset

the pallet's dispatchables can be executed by the Root or Treasurer
origins.

### Treasury Pallet

Treasury Pallet can accept proposals for `spends` of various asset kinds
and pay them out through the implementation of the `Pay` trait.

New Dispatchables:
- `spend(Config::AssetKind, AssetBalance, Config::Beneficiary,
Option<ValidFrom>)` - propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout;
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

The parameters' types of the `spend` dispatchable exposed via the
pallet's `Config` and allows to propose and accept a spend of a certain
amount.

An approved spend can be claimed via the `payout` within the
`Config::SpendPeriod`. Clients provide an implementation of the `Pay`
trait which can pay an asset of the `AssetKind` to the `Beneficiary` in
`AssetBalance` units.

The implementation of the Pay trait might not have an immediate final
payment status, for example if implemented over `XCM` and the actual
transfer happens on a remote chain.

The `check_status` dispatchable can be executed to update the spend's
payment state and retry the `payout` if the payment has failed.

---------

Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: command-bot <>
      cb944dc5
  13. Oct 06, 2023
  15. Oct 05, 2023
  17. Oct 04, 2023
  19. Oct 03, 2023
  21. Sep 29, 2023
    • Bastian Köcher's avatar
      Remove kusama and polkadot runtime crates (#1731) · bf90cb0b
      Bastian Köcher authored 
      This pull request is removing the Kusama and Polkadot runtime crates. As
still some crates dependent on the runtime crates, this pull request is
doing some more changes.

- It removes the `hostperfcheck` CLI command. This CLI command could
compare the current node against the standard hardware by doing some
checks. Later we added the hardware benchmark feature to Substrate. This
hardware benchmark is running on every node startup and prints a warning
if the current node is too slow. This makes this CLI command a duplicate
that was also depending on the kusama runtime.

- The pull request is removing the emulated integration tests that were
requiring the Kusama or Polkadot runtime crates.
      bf90cb0b
  23. Sep 28, 2023
  25. Sep 27, 2023
  27. Sep 26, 2023
    • dependabot[bot]'s avatar
      Bump directories from 4.0.1 to 5.0.1 (#1656) · a846b746
      dependabot[bot] authored 
      Bumps [directories](https://github.com/soc/directories-rs) from 4.0.1 to
5.0.1.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/soc/directories-rs/commits">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=directories&package-manager=cargo&previous-version=4.0.1&new-version=5.0.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores

)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: default avatardependabot[bot] <[email protected]>
Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      a846b746
  29. Sep 24, 2023
  31. Sep 21, 2023
  33. Sep 20, 2023
  35. Sep 19, 2023
    • Bastian Köcher's avatar
      Remove Polkadot & Kusama native runtime (#1304) · 6079b6dd
      Bastian Köcher authored 
      This pull request removes the Polkadot and Kusama native runtime from
the polkadot node. This brings some implications with it:

There are no more kusama/polkadot-dev chain specs available. We will
need to write some tooling in the fellowship repo to provide them
easily.

The try-runtime job for polkadot & kusama is not available anymore as we
don't have the dev chain specs anymore.

Certain benchmarking commands will also not work until we migrate them
to use a runtime api.

Some crates in utils are still depending on the polkadot/kusama native
runtime that will also need to be fixed.

Port of: https://github.com/paritytech/polkadot/pull/7467
      6079b6dd
  37. Sep 18, 2023
  39. Sep 17, 2023
  41. Sep 15, 2023
  43. Sep 13, 2023
  45. Sep 12, 2023
  47. Sep 11, 2023
    • Vsevolod Stakhov's avatar
      Allow to broadcast network messages in parallel (#1409) · 44dbb739
      Vsevolod Stakhov authored 
      This PR addresses multiple issues pending:

* [x] Update orchestra to the recent version and test how the node
performs
* [x] Add some useful metrics for outbound network bridge
* [x] Try to send incoming network requests to all subsystems without
blocking on some particular subsystem in that loop
* [x] Fix all incompatibilities between orchestra and polkadot code
(e.g. malus node)
      44dbb739