## Motivation

`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.

While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.

## Solution

This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.

Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.

All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.

#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).

Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>

Missing descriptions (47):  

- [x] `cumulus/client/collator/Cargo.toml`
- [x] `cumulus/client/relay-chain-inprocess-interface/Cargo.toml`
- [x] `cumulus/client/cli/Cargo.toml`
- [x] `cumulus/client/service/Cargo.toml`
- [x] `cumulus/client/relay-chain-rpc-interface/Cargo.toml`
- [x] `cumulus/client/relay-chain-interface/Cargo.toml`
- [x] `cumulus/client/relay-chain-minimal-node/Cargo.toml`
- [x] `cumulus/parachains/pallets/parachain-info/Cargo.toml`
- [x] `cumulus/parachains/pallets/ping/Cargo.toml`
- [x] `cumulus/primitives/utility/Cargo.toml`
- [x] `cumulus/primitives/aura/Cargo.toml`
- [x] `cumulus/primitives/core/Cargo.toml`
- [x] `cumulus/primitives/parachain-inherent/Cargo.toml`
- [x] `cumulus/test/relay-sproof-builder/Cargo.toml`
- [x] `cumulus/pallets/xcmp-queue/Cargo.toml`
- [x] `cumulus/pallets/dmp-queue/Cargo.toml`
- [x] `cumulus/pallets/xcm/Cargo.toml`
- [x] `polkadot/erasure-coding/Cargo.toml`
- [x] `polkadot/statement-table/Cargo.toml`
- [x] `polkadot/primitives/Cargo.toml`
- [x] `polkadot/rpc/Cargo.toml`
- [x] `polkadot/node/service/Cargo.toml`
- [x] `polkadot/node/core/parachains-inherent/Cargo.toml`
- [x] `polkadot/node/core/approval-voting/Cargo.toml`
- [x] `polkadot/node/core/dispute-coordinator/Cargo.toml`
- [x] `polkadot/node/core/av-store/Cargo.toml`
- [x] `polkadot/node/core/chain-api/Cargo.toml`
- [x] `polkadot/node/core/prospective-parachains/Cargo.toml`
- [x] `polkadot/node/core/backing/Cargo.toml`
- [x] `polkadot/node/core/provisioner/Cargo.toml`
- [x] `polkadot/node/core/runtime-api/Cargo.toml`
- [x] `polkadot/node/core/bitfield-signing/Cargo.toml`
- [x] `polkadot/node/network/dispute-distribution/Cargo.toml`
- [x] `polkadot/node/network/bridge/Cargo.toml`
- [x] `polkadot/node/network/collator-protocol/Cargo.toml`
- [x] `polkadot/node/network/approval-distribution/Cargo.toml`
- [x] `polkadot/node/network/availability-distribution/Cargo.toml`
- [x] `polkadot/node/network/bitfield-distribution/Cargo.toml`
- [x] `polkadot/node/network/gossip-support/Cargo.toml`
- [x] `polkadot/node/network/availability-recovery/Cargo.toml`
- [x] `polkadot/node/collation-generation/Cargo.toml`
- [x] `polkadot/node/overseer/Cargo.toml`
- [x] `polkadot/runtime/parachains/Cargo.toml`
- [x] `polkadot/runtime/common/slot_range_helper/Cargo.toml`
- [x] `polkadot/runtime/metrics/Cargo.toml`
- [x] `polkadot/xcm/pallet-xcm-benchmarks/Cargo.toml`
- [x] `polkadot/utils/generate-bags/Cargo.toml`
- [x]  `substrate/bin/minimal/runtime/Cargo.toml`

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: alindima <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Marcin S <[email protected]>
Co-authored-by: alindima <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

This PR updates the version of `serde_json` to `1.0.108` throughout the
codebase.

This PR prepares chains specs for _native-runtime-free_  world.

This PR has following changes:
- `substrate`:
  - adds support for:
- JSON based `GenesisConfig` to `ChainSpec` allowing interaction with
runtime `GenesisBuilder` API.
- interacting with arbitrary runtime wasm blob to[
`chain-spec-builder`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/bin/utils/chain-spec-builder/src/lib.rs#L46)
command line util,
- removes
[`code`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/frame/system/src/lib.rs#L660)
from `system_pallet`
  - adds `code` to the `ChainSpec`
- deprecates
[`ChainSpec::from_genesis`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/client/chain-spec/src/chain_spec.rs#L263),
but also changes the signature of this method extending it with `code`
argument.
[`ChainSpec::builder()`](https://github.com/paritytech/substrate/blob/20bee680ed098be7239cf7a6b804cd4de267983e/client/chain-spec/src/chain_spec.rs#L507)
should be used instead.
- `polkadot`:
- all references to `RuntimeGenesisConfig` in `node/service` are
removed,
- all
`(kusama|polkadot|versi|rococo|wococo)_(staging|dev)_genesis_config`
functions now return the JSON patch for default runtime `GenesisConfig`,
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,

- `cumulus`:
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,
- _JSON_ patch configuration used instead of `RuntimeGenesisConfig
struct` in all chain specs.
  
---------

Co-authored-by: command-bot <>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Kevin Krone <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

(imported from https://github.com/paritytech/cumulus/pull/2157)

## Changes

This MR refactores the XCMP, Parachains System and DMP pallets to use
the [MessageQueue](https://github.com/paritytech/substrate/pull/12485)
for delayed execution of incoming messages. The DMP pallet is entirely
replaced by the MQ and thereby removed. This allows for PoV-bounded
execution and resolves a number of issues that stem from the current
work-around.

All System Parachains adopt this change.  
The most important changes are in `primitives/core/src/lib.rs`,
`parachains/common/src/process_xcm_message.rs`,
`pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs`
and the runtime configs.

### DMP Queue Pallet

The pallet got removed and its logic refactored into parachain-system.
Overweight message management can be done directly through the MQ
pallet.

Final undeployment migrations are provided by
`cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that
can be configured with an aux config trait like:

```rust
parameter_types! {
	pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME;
	pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent;
}

impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime {
	type PalletName = DmpQueuePalletName;
	type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>;
	type DbWeight = <Runtime as frame_system::Config>::DbWeight;
}

// And adding them to your Migrations tuple:
pub type Migrations = (
	...
	cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>,
	cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>,
);
```

### XCMP Queue pallet

Removed all dispatch queue functionality. Incoming XCMP messages are now
either: Immediately handled if they are Signals, enqueued into the MQ
pallet otherwise.

New config items for the XCMP queue pallet:
```rust
/// The actual queue implementation that retains the messages for later processing.
type XcmpQueue: EnqueueMessage<ParaId>;

/// How a XCM over HRMP from a sibling parachain should be processed.
type XcmpProcessor: ProcessMessage<Origin = ParaId>;

/// The maximal number of suspended XCMP channels at the same time.
#[pallet::constant]
type MaxInboundSuspended: Get<u32>;
```

How to configure those:

```rust
// Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since
// the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s.
type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>;

// Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched
// with origin `Junction::Sibling(…)`.
type XcmpProcessor = ProcessFromSibling<
	ProcessXcmMessage<
		AggregateMessageOrigin,
		xcm_executor::XcmExecutor<xcm_config::XcmConfig>,
		RuntimeCall,
	>,
>;

// Not really important what to choose here. Just something larger than the maximal number of channels.
type MaxInboundSuspended = sp_core::ConstU32<1_000>;
```

The `InboundXcmpStatus` storage item was replaced by
`InboundXcmpSuspended` since it now only tracks inbound queue suspension
and no message indices anymore.

Now only sends the most recent channel `Signals`, as all prio ones are
out-dated anyway.

### Parachain System pallet

For `DMP` messages instead of forwarding them to the `DMP` pallet, it
now pushes them to the configured `DmpQueue`. The message processing
which was triggered in `set_validation_data` is now being done by the MQ
pallet `on_initialize`.

XCMP messages are still handed off to the `XcmpMessageHandler`
(XCMP-Queue pallet) - no change here.

New config items for the parachain system pallet:
```rust
/// Queues inbound downward messages for delayed processing. 
///
/// Analogous to the `XcmpQueue` of the XCMP queue pallet.
type DmpQueue: EnqueueMessage<AggregateMessageOrigin>;
``` 

How to configure:
```rust
/// Use the MQ pallet to store DMP messages for delayed processing.
type DmpQueue = MessageQueue;
``` 

## Message Flow

The flow of messages on the parachain side. Messages come in from the
left via the `Validation Data` and finally end up at the `Xcm Executor`
on the right.

![Untitled
(1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d)

## Further changes

- Bumped the default suspension, drop and resume thresholds in
`QueueConfigData::default()`.
- `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when
they would be a noop.
- Properly validate the `QueueConfigData` before setting it.
- Marked weight files as auto-generated so they wont auto-expand in the
MR files view.
- Move the `hypothetical` asserts to `frame_support` under the name
`experimental_hypothetically`

Questions:
- [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in
the runtimes? Not sure how to best fix. Just having them like this makes
tests fail that rely on the real message processor when the feature is
enabled.
- [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler
already takes 80% so I put it to 10% but that is quite low.

TODO:
- [x] Remove c&p code after
https://github.com/paritytech/polkadot/pull/6271
- [x] Use `HandleMessage` once it is public in Substrate
- [x] fix `runtime-benchmarks` feature
https://github.com/paritytech/polkadot/pull/6966
- [x] Benchmarks
- [x] Tests
- [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended`
- [x] Possibly cleanup Migrations (DMP+XCMP)
- [x] optional: create `TransformProcessMessageOrigin` in Substrate and
replace `ProcessFromSibling`
- [ ] Rerun weights on ref HW

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>

We shouldn't override with their default fields that have been added in
the previous version(v8), because we are going to lose whatever values have
been set.

Note, v8 & v9 seems to have landed at the same time on Rococo, probably
they will land at the same time on westend and other chains, so functionally
doesn't make much difference, but let's have this fixed for people that copy-paste
:D, like me.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

Adds a config file that allows to run `zepter` without any arguments in
the workspace to address all issues.
A secondary workflow for the CI is provided as `zepter run check`. Both
the formatting and linting are now in one check for efficiancy.

The latest version also detects some more things that `featalign` was
already showing.

Error message [in the
CI](https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/3916205)
now looks like this:
```pre
...
crate 'test-parachains' (/Users/vados/Documents/work/polkadot-sdk/polkadot/parachain/test-parachains/Cargo.toml)
  feature 'std'
    must propagate to:
      parity-scale-codec
Found 55 issues (run with --fix to fix).
Error: Command 'lint propagate-feature' failed with exit code 1

Polkadot-SDK uses the Zepter CLI to detect abnormalities in the feature configuration.
It looks like one more more checks failed; please check the console output. You can try to automatically address them by running `zepter`.
Otherwise please ask directly in the Merge Request, GitHub Discussions or on Matrix Chat, thank you.

For more information, see:
  - https://github.com/paritytech/polkadot-sdk/issues/1831
  - https://github.com/ggwpez/zepter
```

TODO:
- [x] Check that CI fails correctly

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

it is indeed correct.

Co-authored-by: eskimor <[email protected]>

Splits the test in multiple cases.

closes https://github.com/paritytech/polkadot-sdk/issues/1882

## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Even if the host configuration is returning `0` for the `lookahead`, we
should schedule at least one job on a core if the core exists.

The migration was missing to migrate `AvailabilityCores`. If this isn't
migrated, all parachains in the availability phase would stall until the
next session is started. This pull request fixes this by migrating this
data. Besides that it is doing some cosmetics.

The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.

This requires: https://github.com/paritytech/scale-info/pull/197

---------

Co-authored-by: Francisco Aguirre <[email protected]>

Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.

This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.

The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.

XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).

# Note for reviewers

Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration

# Important note

After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!

Wallet UIs that want to expose the new delivery fee can do so using the
formula:

```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```

where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Giles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

Closes https://github.com/paritytech/polkadot-sdk/issues/1916

Changes:
- Trivially wrap the migration into a version migration to enforce
idempotency.
- Opinionated logging nits

@liamaharon maybe we can add a check to the `try-runtime-cli` that
migrations are idempotent? It should be possible to check that the
storage root is identical after executing a second time (and that it
does not panic like it did here 😆

).

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

The runtime code of a parachain can be replaced on the relay-chain via:

[cumulus]:
[enact_authorized_upgrade](https://github.com/paritytech/polkadot-sdk/blob/1a38d6d6/cumulus/pallets/parachain-system/src/lib.rs#L661);
this is used for a runtime upgrade when a parachain is not bricked.

[polkadot] (these are used when a parachain is bricked):
-
[force_set_current_code](https://github.com/paritytech/polkadot-sdk/blob/1a38d6d6/polkadot/runtime/parachains/src/paras/mod.rs#L823):
immediately changes the runtime code of a given para without a pvf check
(root).
-
[force_schedule_code_upgrade](https://github.com/paritytech/polkadot-sdk/blob/1a38d6d6/polkadot/runtime/parachains/src/paras/mod.rs#L864):
schedules a change to the runtime code of a given para including a pvf
check of the new code (root).
-
[schedule_code_upgrade](https://github.com/paritytech/polkadot-sdk/blob/1a38d6d6/polkadot/runtime/common/src/paras_registrar.rs#L395):
schedules a change to the runtime code of a given para including a pvf
check of the new code. Besides root, the parachain or parachain manager
can call this extrinsic given that the parachain is unlocked.

Polkadot signals a parachain to be ready for a runtime upgrade through
the
[GoAhead](https://github.com/paritytech/polkadot-sdk/blob/e4949344

/polkadot/primitives/src/v5/mod.rs#L1229)
signal.

When in cumulus `enact_authorized_upgrade` is executed, the same
underlying helper function of `force_schedule_code_upgrade` &
`schedule_code_upgrade`:
[schedule_code_upgrade](https://github.com/paritytech/polkadot/blob/09b61286da11921a3dda0a8e4015ceb9ef9cffca/runtime/parachains/src/paras/mod.rs#L1778),
is called on the relay-chain, which sets the `GoAhead` signal (if the
pvf is accepted).

If Cumulus receives the `GoAhead` signal from polkadot without having
the `PendingValidationCode` ready, it will panic
([ref](https://github.com/paritytech/polkadot/pull/7412)). For
`enact_authorized_upgrade` we know for sure the `PendingValidationCode`
is set. On the contrary, for `force_schedule_code_upgrade` &
`schedule_code_upgrade` this is not the case.

This PR includes a flag such that the `GoAhead` signal will only be set
when a runtime upgrade is enacted by the parachain
(`enact_authorized_upgrade`).

additional info: https://github.com/paritytech/polkadot/pull/7412

Closes #641

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

This PR refactors the staking ledger logic to encapsulate all reads and
mutations of `Ledger`, `Bonded`, `Payee` and stake locks within the
`StakingLedger` struct implementation.

With these changes, all the reads and mutations to the `Ledger`, `Payee`
and `Bonded` storage map should be done through the methods exposed by
StakingLedger to ensure the data and lock consistency of the operations.
The new introduced methods that mutate and read Ledger are:

- `ledger.update()`: inserts/updates a staking ledger in storage;
updates staking locks accordingly (and ledger.bond(), which is synthatic
sugar for ledger.update())
- `ledger.kill()`: removes all Bonded and StakingLedger related data for
a given ledger; updates staking locks accordingly;
`StakingLedger::get(account)`: queries both the `Bonded` and `Ledger`
storages and returns a `Option<StakingLedger>`. The pallet impl exposes
fn ledger(account) as synthatic sugar for `StakingLedger::get(account)`.

Retrieving a ledger with `StakingLedger::get()` can be done by providing
either a stash or controller account. The input must be wrapped in a
`StakingAccount` variant (Stash or Controller) which is treated
accordingly. This simplifies the caller API but will eventually be
deprecated once we completely get rid of the controller account in
staking. However, this refactor will help with the work necessary when
completely removing the controller.

Other goals:

- No logical changes have been introduced in this PR;
- No breaking changes or updates in wallets required;
- No new storage items or need to perform storage migrations;
- Centralise the changes to bonds and ledger updates to simplify the
OnStakingUpdate updates to the target list (related to
https://github.com/paritytech/polkadot-sdk/issues/443)

Note: it would be great to prevent or at least raise a warning if
`Ledger<T>`, `Payee<T>` and `Bonded<T>` storage types are accessed
outside the `StakingLedger` implementation. This PR should not get
blocked by that feature, but there's a tracking issue here
https://github.com/paritytech/polkadot-sdk/issues/149

Related and step towards
https://github.com/paritytech/polkadot-sdk/issues/443

Co-authored-by: Marcin S <[email protected]>

# Description

In a couple of cases, there were links pointing to the w3f github pages
domain. In other instances, there were links pointing to the old
polkadot repo's github pages. Both of these are now pointing to the
relevant links in
https://paritytech.github.io/polkadot-sdk/book/index.html.

These changes were made specifically because the w3f github pages
returns a 404, and while fixing the links, the old polkadot repo links
were touched up as well even if they do redirect properly.

This shouldn't affect anything as these are documentation link changes
only.

Exposes disabled validators list via a runtime API.

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: ordian <[email protected]>

Adds a warning to FRAME pallets when a function argument that starts
with `_` is used in the weight formula.
This is in most cases an error since the weight witness needs to be
checked.

Example:

```rust
#[pallet::call_index(0)]
#[pallet::weight(T::SystemWeightInfo::remark(_remark.len() as u32))]
pub fn remark(_origin: OriginFor<T>, _remark: Vec<u8>) -> DispatchResultWithPostInfo {
	Ok(().into())
}
```

Produces this warning:

```pre
warning: use of deprecated constant `pallet::warnings::UncheckedWeightWitness_0::_w`: 
                 It is deprecated to not check weight witness data.
                 Please instead ensure that all witness data for weight calculation is checked before usage.
         
                 For more info see:
                     <https://github.com/paritytech/polkadot-sdk/pull/1818>
   --> substrate/frame/system/src/lib.rs:424:40
    |
424 |         pub fn remark(_origin: OriginFor<T>, _remark: Vec<u8>) -> DispatchResultWithPostInfo {
    |                                              ^^^^^^^
    |
    = note: `#[warn(deprecated)]` on by default
```

Can be suppressed like this, since in this case it is legit:

```rust
#[pallet::call_index(0)]
#[pallet::weight(T::SystemWeightInfo::remark(remark.len() as u32))]
pub fn remark(_origin: OriginFor<T>, remark: Vec<u8>) -> DispatchResultWithPostInfo {
	let _ = remark; // We dont need to check the weight witness.
	Ok(().into())
}
```

Changes:
- Add warning on uncheded weight witness
- Respect `subkeys` limit in `System::kill_prefix`
- Fix HRMP pallet and other warnings
- Update`proc_macro_warning` dependency
- Delete random folder `substrate/src/src` 🙈

 
- Adding Prdoc

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: joe petrowski <[email protected]>

Update the HRMP pallet to use field names for Event variants to improve
metadata for a better client experience.
Event variants are now structs instead of unnamed tuples.

Partially implements Substrate issue
[9903](https://github.com/paritytech/substrate/issues/9903) which
doesn't appear to have been moved to the monorepo.

- Async-backing related primitives are stable `primitives::v6`
- Async-backing API is now part of `api_version(7)`
- It's enabled on Rococo and Westend runtimes

---------

Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>

Updates the HRMP pallet benchmarks to Benchmarks v2 and fixes a
small misconfiguration in one benchmark.

---------

Co-authored-by: command-bot <>

Solution to establish HRMP channels between system parachains.

---------

Co-authored-by: Muharem Ismailov <[email protected]>

Bumps the known_good_semver group with 2 updates:
[serde_json](https://github.com/serde-rs/json) and
[syn](https://github.com/dtolnay/syn).

Updates `serde_json` from 1.0.106 to 1.0.107
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.107</h2>
<ul>
<li>impl IntoDeserializer for &amp;RawValue (<a
href="https://redirect.github.com/serde-rs/json/issues/1071">#1071</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/b6e113f2036c52e994ca805e530ee4ffae791f71"><code>b6e113f</code></a>
Release 1.0.107</li>
<li><a
href="https://github.com/serde-rs/json/commit/00626a0a95b3d4cee8d57709f0acc804c1296716"><code>00626a0</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1073">#1073</a>
from dtolnay/rawvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/b9d296f87d6081afdd590d5a6006737db961302b"><code>b9d296f</code></a>
IntoDeserializer for &amp;RawValue</li>
<li><a
href="https://github.com/serde-rs/json/commit/4ea34a2566ba82a2e602526d0919d23e88c9e5ef"><code>4ea34a2</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1072">#1072</a>
from dtolnay/rawvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/fe30766ae5c79bfb670b2de1c5596e6e11e22f8c"><code>fe30766</code></a>
Support deserializing from &amp;RawValue</li>
<li><a
href="https://github.com/serde-rs/json/commit/2c22077f0e2decfda5cdfd5821c5f9547d584b76"><code>2c22077</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1062">#1062</a>
from osiewicz/remove_build_rs</li>
<li><a
href="https://github.com/serde-rs/json/commit/04f7758b6eae935237574b25a1e63cf5e281e19e"><code>04f7758</code></a>
fixup! chore: Remove no_btreemap_get_key_value and
no_btreemap_remove_entry.</li>
<li><a
href="https://github.com/serde-rs/json/commit/83bdc5fd4213d94201a3d9ad0f2943da7eba1dd6"><code>83bdc5f</code></a>
Omit return keyword in <code>remove_entry</code></li>
<li><a
href="https://github.com/serde-rs/json/commit/89a274195680d3ea6a2b442ff633b81ccf60bbe4"><code>89a2741</code></a>
Revert &quot;Remove limb_width32 and limb_width64 features&quot;</li>
<li><a
href="https://github.com/serde-rs/json/commit/16e04ceeddfdfad18fb1ae8530695a318fa9bc02"><code>16e04ce</code></a>
fixup! Remove limb_width32 and limb_width64 features</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.106...v1.0.107">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.32 to 2.0.33
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.33</h2>
<ul>
<li>Special handling for the <code>(/*ERROR*/)</code> placeholder that
rustc uses for macros that fail to expand</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/5e3f55e684b7e33424b9f551105463418b196eb4"><code>5e3f55e</code></a>
Release 2.0.33</li>
<li><a
href="https://github.com/dtolnay/syn/commit/3e04809f5218c6d5fb2b09a6c55933e785825c75"><code>3e04809</code></a>
Pull in proc-macro2 error placeholder change</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2cd5608a4c37810bb0947b0c161a20695b3ce487"><code>2cd5608</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1508">#1508</a>
from dtolnay/error</li>
<li><a
href="https://github.com/dtolnay/syn/commit/84cfe09484f6468bc85fb01db11c6a10fcb2d988"><code>84cfe09</code></a>
Fall through to 'Unrecognized literal' error</li>
<li><a
href="https://github.com/dtolnay/syn/commit/a80570c81bf15c9afcf8e2470ab06f60f7a8183d"><code>a80570c</code></a>
Parse rustc's representation of macro expansion error</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.32...2.0.33">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps the known_good_semver group with 2 updates: [serde_json](https://github.com/serde-rs/json) and [syn](https://github.com/dtolnay/syn).


Updates `serde_json` from 1.0.105 to 1.0.106
- [Release notes](https://github.com/serde-rs/json/releases)
- [Commits](https://github.com/serde-rs/json/compare/v1.0.105...v1.0.106)

Updates `syn` from 2.0.31 to 2.0.32
- [Release notes](https://github.com/dtolnay/syn/releases)
- [Commits](https://github.com/dtolnay/syn/compare/2.0.31...2.0.32)

---
updated-dependencies:
- dependency-name: serde_json
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
- dependency-name: syn
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
...

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

* Forgotten `polkadot-core-primitives/std`

* Reorder

* Fix scheduled state at session boundaries.

* Cleanup + better docs.

* More cleanup and fixes.

* Remove 12s hack.

* Add dep.

* Make clippy happy

---------

Co-authored-by: eskimor <[email protected]>

* rfc14

* Update polkadot/runtime/common/src/paras_registrar/mod.rs

Co-authored-by: Bastian Köcher <[email protected]>

* Update polkadot/runtime/common/src/paras_registrar/mod.rs

Co-authored-by: Bastian Köcher <[email protected]>

* Update polkadot/runtime/common/src/paras_registrar/mod.rs

Co-authored-by: Bastian Köcher <[email protected]>

* fmt

* fix

* Update polkadot/runtime/common/src/paras_registrar/migration.rs

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* fmt

* 2224 is unlocked

* update migration list

* update comment

* use VersionedMigration

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Rename `polkadot-parachain` to `polkadot-parachain-primitives`

While doing this it also fixes some last `rustdoc` issues and fixes
another Cargo warning related to `pallet-paged-list`.

* Fix compilation

* ".git/.scripts/commands/fmt/fmt.sh"

* Fix XCM docs

---------

Co-authored-by: command-bot <>

* move min backing votes const to runtime

also cache it per-session in the backing subsystem

Signed-off-by: alindima <[email protected]>

* add runtime migration

* introduce api versioning for min_backing votes

also enable it for rococo/versi for testing

* also add min_backing_votes runtime calls to statement-distribution

this dependency has been recently introduced by async backing

* remove explicit version runtime API call

this is not needed, as the RuntimeAPISubsystem already takes care
of versioning and will return NotSupported if the version is not
right.

* address review comments

- parametrise backing votes runtime API with session index
- remove RuntimeInfo usage in backing subsystem, as runtime API
caches the min backing votes by session index anyway.
- move the logic for adjusting the configured needed backing votes with the size of the backing group
to a primitives helper.
- move the legacy min backing votes value to a primitives helper.
- mark JoinMultiple error as fatal, since the Canceled (non-multiple) counterpart is also fatal.
- make backing subsystem handle fatal errors for new leaves update.
- add HostConfiguration consistency check for zeroed backing votes threshold
- add cumulus accompanying change

* fix cumulus test compilation

* fix tests

* more small fixes

* fix merge

* bump runtime api version for westend and rollback version for rococo

---------

Signed-off-by: alindima <[email protected]>
Co-authored-by: Javier Viola <[email protected]>

* Rename squatted crates

This commit adds the staging- prefix to squatted crates so we can go forward and publish them to crates.io.

Using the staging- prefix is a temp fix until we decide on replacement names.
https://forum.parity.io/t/renaming-squated-crates-in-substrate-polkadot-cumulus/1964/6

* Fix test after crate renames

* Update Lockfile

* Add missing Cumulus licenses

* Typo

* Add missing Substrate licenses

* Single job checking the sub-repos in steps

* Remove dates

* Remove dates

* Add missing (C)

* Update FRAME UI tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update more UI tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Bumps the known_good_semver group with 2 updates: [serde](https://github.com/serde-rs/serde) and [clap](https://github.com/clap-rs/clap).


Updates `serde` from 1.0.186 to 1.0.188
- [Release notes](https://github.com/serde-rs/serde/releases)
- [Commits](https://github.com/serde-rs/serde/compare/v1.0.186...v1.0.188)

Updates `clap` from 4.4.0 to 4.4.1
- [Release notes](https://github.com/clap-rs/clap/releases)
- [Changelog](https://github.com/clap-rs/clap/blob/master/CHANGELOG.md)
- [Commits](https://github.com/clap-rs/clap/compare/clap_complete-v4.4.0...v4.4.1)

---
updated-dependencies:
- dependency-name: serde
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
- dependency-name: clap
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
...

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

* Fix `test-rustdoc`

* ".git/.scripts/commands/fmt/fmt.sh"

---------

Co-authored-by: command-bot <>

* Fix build profiles

Closes https://github.com/paritytech/polkadot-sdk/issues/1155

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Manually set version to 1.0.0

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use workspace repo

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* 'Authors and Edition from workspace

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Manually fix conflicting ?

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove duplicates

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Autofix feature propagation

zepter lint propagate-feature --feature try-runtime --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="try-runtime:frame-try-runtime"
zepter lint propagate-feature --feature runtime-benchmarks --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking"
zepter lint propagate-feature --feature std --left-side-feature-missing=ignore --workspace --fix
zepter f f

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump zepter

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add some duplicates

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Add some duplicates"

This reverts commit c6ce6272

.

* Remove default enabled features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump Zepter

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump in correct location 🤦



Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* DNM: Add some mistakes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* DNM: Add some mistakes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "DNM: Add some mistakes"

This reverts commit d469b3f0.

* Revert "DNM: Add some mistakes"

This reverts commit d892a73a

.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>