## Motivation

`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.

While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.

## Solution

This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.

Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.

All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.

#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).

Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055



---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>

We are introducing a new set of `XcmController` traits (final name yet
to be determined).
These traits are implemented by `pallet-xcm` and allows other pallets,
such as `pallet_contracts`, to rely on these traits instead of tight
coupling them to `pallet-xcm`.

Using only the existing Xcm traits would mean duplicating the logic from
`pallet-xcm` in these other pallets, which we aim to avoid. Our
objective is to ensure that when these APIs are called from
`pallet-contracts`, they produce the exact same outcomes as if called
directly from `pallet-xcm`.

The other benefits is that we can also expose return values to
`pallet-contracts` instead of just calling `pallet-xcm` dispatchable and
getting a `DispatchResult` back.

See traits integration in this PR
https://github.com/paritytech/polkadot-sdk/pull/1248

, where the traits
are used as follow to define and implement `pallet-contracts` Config.
```rs
// Contracts config:
pub trait Config: frame_system::Config {
  // ...

  /// A type that exposes XCM APIs, allowing contracts to interact with other parachains, and
  /// execute XCM programs.
  type Xcm: xcm_executor::traits::Controller<
	  OriginFor<Self>,
	  <Self as frame_system::Config>::RuntimeCall,
	  BlockNumberFor<Self>,
  >;
}

// implementation
impl pallet_contracts::Config for Runtime {
        // ...

	type Xcm = pallet_xcm::Pallet<Self>;
}
```

---------

Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: command-bot <>

This PR prepares chains specs for _native-runtime-free_  world.

This PR has following changes:
- `substrate`:
  - adds support for:
- JSON based `GenesisConfig` to `ChainSpec` allowing interaction with
runtime `GenesisBuilder` API.
- interacting with arbitrary runtime wasm blob to[
`chain-spec-builder`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/bin/utils/chain-spec-builder/src/lib.rs#L46)
command line util,
- removes
[`code`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/frame/system/src/lib.rs#L660)
from `system_pallet`
  - adds `code` to the `ChainSpec`
- deprecates
[`ChainSpec::from_genesis`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/client/chain-spec/src/chain_spec.rs#L263),
but also changes the signature of this method extending it with `code`
argument.
[`ChainSpec::builder()`](https://github.com/paritytech/substrate/blob/20bee680ed098be7239cf7a6b804cd4de267983e/client/chain-spec/src/chain_spec.rs#L507

)
should be used instead.
- `polkadot`:
- all references to `RuntimeGenesisConfig` in `node/service` are
removed,
- all
`(kusama|polkadot|versi|rococo|wococo)_(staging|dev)_genesis_config`
functions now return the JSON patch for default runtime `GenesisConfig`,
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,

- `cumulus`:
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,
- _JSON_ patch configuration used instead of `RuntimeGenesisConfig
struct` in all chain specs.
  
---------

Co-authored-by: command-bot <>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Kevin Krone <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Right now governance could only control byte-fee component of Rococo <>
Westend message fees (paid at Asset Hubs). This PR changes it a bit:
1) governance now allowed to control both fee components - byte fee and
base fee;
2) base fee now includes cost of "default" delivery and confirmation
transactions, in addition to `ExportMessage` instruction cost.

(imported from https://github.com/paritytech/cumulus/pull/2157)

## Changes

This MR refactores the XCMP, Parachains System and DMP pallets to use
the [MessageQueue](https://github.com/paritytech/substrate/pull/12485)
for delayed execution of incoming messages. The DMP pallet is entirely
replaced by the MQ and thereby removed. This allows for PoV-bounded
execution and resolves a number of issues that stem from the current
work-around.

All System Parachains adopt this change.  
The most important changes are in `primitives/core/src/lib.rs`,
`parachains/common/src/process_xcm_message.rs`,
`pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs`
and the runtime configs.

### DMP Queue Pallet

The pallet got removed and its logic refactored into parachain-system.
Overweight message management can be done directly through the MQ
pallet.

Final undeployment migrations are provided by
`cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that
can be configured with an aux config trait like:

```rust
parameter_types! {
	pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME;
	pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent;
}

impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime {
	type PalletName = DmpQueuePalletName;
	type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>;
	type DbWeight = <Runtime as frame_system::Config>::DbWeight;
}

// And adding them to your Migrations tuple:
pub type Migrations = (
	...
	cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>,
	cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>,
);
```

### XCMP Queue pallet

Removed all dispatch queue functionality. Incoming XCMP messages are now
either: Immediately handled if they are Signals, enqueued into the MQ
pallet otherwise.

New config items for the XCMP queue pallet:
```rust
/// The actual queue implementation that retains the messages for later processing.
type XcmpQueue: EnqueueMessage<ParaId>;

/// How a XCM over HRMP from a sibling parachain should be processed.
type XcmpProcessor: ProcessMessage<Origin = ParaId>;

/// The maximal number of suspended XCMP channels at the same time.
#[pallet::constant]
type MaxInboundSuspended: Get<u32>;
```

How to configure those:

```rust
// Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since
// the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s.
type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>;

// Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched
// with origin `Junction::Sibling(…)`.
type XcmpProcessor = ProcessFromSibling<
	ProcessXcmMessage<
		AggregateMessageOrigin,
		xcm_executor::XcmExecutor<xcm_config::XcmConfig>,
		RuntimeCall,
	>,
>;

// Not really important what to choose here. Just something larger than the maximal number of channels.
type MaxInboundSuspended = sp_core::ConstU32<1_000>;
```

The `InboundXcmpStatus` storage item was replaced by
`InboundXcmpSuspended` since it now only tracks inbound queue suspension
and no message indices anymore.

Now only sends the most recent channel `Signals`, as all prio ones are
out-dated anyway.

### Parachain System pallet

For `DMP` messages instead of forwarding them to the `DMP` pallet, it
now pushes them to the configured `DmpQueue`. The message processing
which was triggered in `set_validation_data` is now being done by the MQ
pallet `on_initialize`.

XCMP messages are still handed off to the `XcmpMessageHandler`
(XCMP-Queue pallet) - no change here.

New config items for the parachain system pallet:
```rust
/// Queues inbound downward messages for delayed processing. 
///
/// Analogous to the `XcmpQueue` of the XCMP queue pallet.
type DmpQueue: EnqueueMessage<AggregateMessageOrigin>;
``` 

How to configure:
```rust
/// Use the MQ pallet to store DMP messages for delayed processing.
type DmpQueue = MessageQueue;
``` 

## Message Flow

The flow of messages on the parachain side. Messages come in from the
left via the `Validation Data` and finally end up at the `Xcm Executor`
on the right.

![Untitled
(1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d)

## Further changes

- Bumped the default suspension, drop and resume thresholds in
`QueueConfigData::default()`.
- `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when
they would be a noop.
- Properly validate the `QueueConfigData` before setting it.
- Marked weight files as auto-generated so they wont auto-expand in the
MR files view.
- Move the `hypothetical` asserts to `frame_support` under the name
`experimental_hypothetically`

Questions:
- [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in
the runtimes? Not sure how to best fix. Just having them like this makes
tests fail that rely on the real message processor when the feature is
enabled.
- [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler
already takes 80% so I put it to 10% but that is quite low.

TODO:
- [x] Remove c&p code after
https://github.com/paritytech/polkadot/pull/6271
- [x] Use `HandleMessage` once it is public in Substrate
- [x] fix `runtime-benchmarks` feature
https://github.com/paritytech/polkadot/pull/6966


- [x] Benchmarks
- [x] Tests
- [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended`
- [x] Possibly cleanup Migrations (DMP+XCMP)
- [x] optional: create `TransformProcessMessageOrigin` in Substrate and
replace `ProcessFromSibling`
- [ ] Rerun weights on ref HW

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>

## Summary

Asset bridging support for AssetHub**Rococo** <-> AssetHub**Wococo** was
added [here](https://github.com/paritytech/polkadot-sdk/pull/1215), so
now we aim to bridge AssetHub**Rococo** and AssetHub**Westend**. (And
perhaps retire AssetHubWococo and the Wococo chains).

## Solution

**bridge-hub-westend-runtime**
- added new runtime as a copy of `bridge-hub-rococo-runtime`
- added support for bridging to `BridgeHubRococo`
- added tests and benchmarks

**bridge-hub-rococo-runtime**
- added support for bridging to `BridgeHubWestend`
- added tests and benchmarks
- internal refactoring by splitting bridge configuration per network,
e.g., `bridge_to_whatevernetwork_config.rs`.

**asset-hub-rococo-runtime**
- added support for asset bridging to `AssetHubWestend` (allows to
receive only WNDs)
- added new xcm router for `Westend`
- added tests and benchmarks

**asset-hub-westend-runtime**
- added support for asset bridging to `AssetHubRococo` (allows to
receive only ROCs)
- added new xcm router for `Rococo`
- added tests and benchmarks

## Deployment

All changes will be deployed as a part of
https://github.com/paritytech/polkadot-sdk/issues/1988.

## TODO

- [x] benchmarks for all pallet instances
- [x] integration tests
- [x] local run scripts


Relates to:
https://github.com/paritytech/parity-bridges-common/issues/2602
Relates to: https://github.com/paritytech/polkadot-sdk/issues/1988



---------

Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: joe petrowski <[email protected]>

[testnet] Align testnet system parachain runtimes using `RelayTreasuryLocation` and `SystemParachains` in the same way (#2023)

This PR addresses several issues:
- simplify referencing `RelayTreasuryLocation` without needing
additional `RelayTreasury` struct
- fix for referencing `SystemParachains` from parachain with `parents:
1` instead of `parents: 0`
- removed hard-coded constants and fix tests for `asset-hub-rococo`
which was merged to master after
https://github.com/paritytech/polkadot-sdk/pull/1726

---------

Co-authored-by: command-bot <>

closes https://github.com/paritytech/polkadot-sdk/issues/1882



## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

This PR does not introduce any functional changes to the existing code,
it merely addresses several minor refactors:
- Moving bridging pallets to separate files.
- Improving the readability and naming of weight files for bridging
pallets and bridging pallet instances.

The reason for this refactor is to facilitate easier plugin integration
for the upcoming bridge between Rococo and Westend.

---------

Co-authored-by: command-bot <>

## Problem

This PR addresses the issue with testnet AssetHub builds, which was
discovered during the execution of `bot bench`.

https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038738
```
     Compiling asset-hub-rococo-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-rococo-runtime)
  warning: Linking globals named 'Core_version': symbol multiply defined!
  error: failed to load bitcode of module "rococo_runtime-8799ee884447805a.rococo_runtime.0bc572b8-cgu.0.rcgu.o": 
  warning: `asset-hub-rococo-runtime-wasm` (lib) generated 1 warning
  error: could not compile `asset-hub-rococo-runtime-wasm` (lib) due to previous error; 1 warning emitted
```

https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038739
```
Compiling asset-hub-westend-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-westend-runtime)
  warning: Linking globals named 'Core_version': symbol multiply defined!
  error: failed to load bitcode of module "westend_runtime-86d7844430f97d5c.westend_runtime.b7678d03-cgu.0.rcgu.o": 
  warning: `asset-hub-westend-runtime-wasm` (lib) generated 1 warning
  error: could not compile `asset-hub-westend-runtime-wasm` (lib) due to previous error; 1 warning emitted
```

## Solution

- Removed dependencies on `rococo-runtime` and `westend-runtime`
introduced by [this
PR](https://github.com/paritytech/polkadot-sdk/pull/1234/files#diff-a86375df98e04ca3cce1ea35c40257a222e2d5087f5f528ff33307678b78dc2dR534-R550).
- Replaced `<rococo_runtime::Treasury as PalletInfoAccess>::index()`
with `rococo_runtime_constants::TREASURY_PALLET_ID`.
- Added `check_treasury_pallet_id` to the relay runtimes to ensure that
the constant is aligned with the pallet id.
- Added "Rococo Treasury" to the waived locations (that will not be
charged fees in the executor) for `BridgeHubRococo` (to be aligned with
AssetHubs).

## References

[Full element discussion
here](https://matrix.to/#/!JUeaZUiYbdrvzvtwSL:parity.io/$2PnjYMsWRjR7M3oOfGuRI0XkjdoqJLtRcAPVcDLuLVg?via=parity.io&via=web3.foundation).

---------

Co-authored-by: command-bot <>

Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.

This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.

The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.

XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).

# Note for reviewers

Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration

# Important note

After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!

Wallet UIs that want to expose the new delivery fee can do so using the
formula:

```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```

where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Giles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add asset-bridging support to it (#1215)

This commit adds Rococo Asset Hub dedicated runtime so we can test new
features here, before merging them in Kusama Asset Hub.
Also adds one such feature: asset transfer over bridge (Rococo AssetHub
<> Wococo AssetHub)

- clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime`
- make it use Rococo primitives, names, assets, constants, etc
- add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo
AssetHub

Fixes #1128

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>