- Dec 14, 2023
-
-
Francisco Aguirre authored
In the move from the old `Currency` traits to the new `fungible/s` family of traits, we already had the `FungiblesAdapter` and `NonFungiblesAdapter` for multiple fungible and non fungible assets respectively. However, for handling only one fungible asset, we were missing a `FungibleAdapter`, and so used the old `CurrencyAdapter` instead. This PR aims to fill in that gap, and provide the new adapter for more updated examples. I marked the old `CurrencyAdapter` as deprecated as part of this PR, and I'll change it to the new `FungibleAdapter` in a following PR. The two stages are separated so as to not bloat this PR with some name fixes in tests. --------- Co-authored-by: command-bot <>
-
Egor_P authored
This PR backports `transaction_version` bump from `1.5.0` release back to `master`
-
- Dec 13, 2023
-
-
Squirrel authored
We currently use a bit of a hack in `.cargo/config` to make sure that clippy isn't too annoying by specifying the list of lints. There is now a stable way to define lints for a workspace. The only down side is that every crate seems to have to opt into this so there's a *few* files modified in this PR. Dependencies: - [x] PR that upgrades CI to use rust 1.74 is merged. --------- Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
Liam Aharon <[email protected]>
-
Branislav Kontur authored
Co-authored-by: command-bot <>
-
Svyatoslav Nikolsky authored
So far the `bridge-hub-test-utils` contained a tests set for testing BridgeHub runtime that is bridging with the remote **parachain**. But we have https://github.com/paritytech/polkadot-sdk/pull/2540 coming, which would add Rococo <> Bulletin chain bridge (where Bulletin = standalone chain that is using GRANDPA finality). Then it'll be expanded to Polkadot BH as well. So this PR adds the same set of tests to the `bridge-hub-test-utils`, but for the case when remote chain is the chain with GRANDPA finality. There's a lot of changes in this PR - I'll describe some: - I've added `BasicParachainRuntime` trait to decrease number of lines we need to add to `where` clause. Could revert, but imo it is useful; - `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is a submodule for generating test data for the test sets. `from_parachain.rs` is used in tests for the case when remote chain is a parachain, `from_grandpa_chain.rs` - for the bridges with remote GRANDPA chains. `mod.rs` has some code, shared by both types of tests; - `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is a submodule with all test cases. The `mod.rs` has tests, suitable for all cases. There's also `wth_parachain.rs` and `with_grandpa_chain.rs` with the same meaning as above; - I've merged the "core" code of two previous tests - `relayed_incoming_message_works` and `complex_relay_extrinsic_works` into one single `relayed_incoming_message_works` test. So now we are always constructing extrinsics and are dispatching them using executive module (meaning all signed extensions are also tested). New test set is used here: https://github.com/paritytech/polkadot-sdk/pull/2540. Once this PR is merged, I'll merge that other PR with master to remove duplicate changes. I'm also planning to cleanup generic constraints + remove some unnecessary assumptions about used chains in a follow-up PRs. But for now I think this PR has enough changes, so don't want to complicate it even more. --- Breaking changes for the code that have used those tests before: - the `construct_and_apply_extrinsic` callback now accepts the `RuntimeCall` instead of the `pallet_utility::Call`; - the `construct_and_apply_extrinsic` now may be called multiple times for the single test, so make sure the `frame_system::CheckNonce` is correctly constructed; - all previous tests have been moved from `bridge_hub_test_utils::test_cases` to `bridge_hub_test_utils::test_cases::from_parachain` module; - there are several changes in test arguments - please refer to https://github.com/paritytech/polkadot-sdk/compare/sv-tests-for-bridge-with-remote-grandpa-chain?expand=1#diff-79a28d4d3e1749050341c2424f00c4c139825b1a20937767f83e58b95166735c for details.
-
- Dec 12, 2023
-
-
Francisco Aguirre authored
We were not filtering for sibling parachains, but for sibling anything --------- Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by: command-bot <>
-
Branislav Kontur authored
## Summary This pull request proposes a solution for improved control of the versioned XCM flow over the bridge (across different consensus chains) and resolves the situation where the sending chain/consensus has already migrated to a higher XCM version than the receiving chain/consensus. ## Problem/Motivation The current flow over the bridge involves a transfer from AssetHubRococo (AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR. In this process: 1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM version checks using the `WrapVersion` feature, influenced by `pallet_xcm::SupportedVersion` (managed by `pallet_xcm::force_xcm_version` or version discovery). 2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM version. The `HaulBlobExporter` converts the inner XCM to [`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471aa0210f0ac9903bdd7d8f9351f9a635f/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467), also using the latest XCM version. However, challenges arise: - Incompatibility when BHW uses a different version than BHR. For instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**, BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing encoding issues for BHW. ``` /// Just a simulation of possible error, which could happen on BHW /// (this code is based on actual master without XCMv4) let encoded = hex_literal::hex!("0400"); println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..])); Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant doesn't exist" }) ``` - Similar compatibility issues exist between AHR and AHW. ## Solution This pull request introduces the following solutions: 1. **New trait `CheckVersion`** - added to the `xcm` module and exposing `pallet_xcm::SupportedVersion`. This enhancement allows checking the actual XCM version for desired destinations outside of the `pallet_xcm` module. 2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check known/configured destination versions, ensuring compatibility. For example, in the scenario mentioned, BHR can store the version `3` for BHW. If BHR is on XCMv4, it will attempt to downgrade the message to version `3` instead of using the latest version `4`. 3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check ensures compatibility with the real destination's XCM version, preventing the unnecessary sending of messages to the local bridge hub if versions are incompatible. These additions aim to improve the control and compatibility of XCM flows over the bridge and addressing issues related to version mismatches. ## Possible alternative solution _(More investigation is needed, and at the very least, it should extend to XCMv4/5. If this proves to be a viable option, I can open an RFC for XCM.)._ Add the `XcmVersion` attribute to the `ExportMessage` so that the sending chain can determine, based on what is stored in `pallet_xcm::SupportedVersion`, the version the destination is using. This way, we may not need to handle the version in `HaulBlobExporter`. ``` ExportMessage { network: NetworkId, destination: InteriorMultiLocation, xcm: Xcm<()> destination_xcm_version: Version, // <- new attritbute }, ``` ``` pub trait ExportXcm { fn validate( network: NetworkId, channel: u32, universal_source: &mut Option<InteriorMultiLocation>, destination: &mut Option<InteriorMultiLocation>, message: &mut Option<Xcm<()>>, destination_xcm_version: Version, , // <- new attritbute ) -> SendResult<Self::Ticket>; ``` ## Future Directions This PR does not fix version discovery over bridge, further investigation will be conducted here: https://github.com/paritytech/polkadot-sdk/issues/2417. ## TODO - [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` - change to 3 or lastest? - [x] fix `pallet-xcm-bridge-hub-router` - [x] fix HaulBlobExporter with version determination [here](https://github.com/paritytech/polkadot-sdk/blob/2183669d05f9b510f979a0cc3c7847707bacba2e/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465) - [x] add unit-tests to the runtimes - [x] run benchmarks for `ExportMessage` - [x] extend local run scripts about `force_xcm_version(dest, version)` - [ ] when merged, prepare governance calls for Rococo/Westend - [ ] add PRDoc Part of: https://github.com/paritytech/parity-bridges-common/issues/2719 --------- Co-authored-by: command-bot <>
-
Chevdor authored
This PR introduces a script and some templates to use the prdoc involved in a release and build: - the changelog - a simple draft of audience documentation Since the prdoc presence was enforced in the middle of the version 1.5.0, not all PRs did come with a `prdoc` file. This PR creates all the missing `prdoc` files with some minimum content allowing to properly generate the changelog. The generated content is **not** suitable for the audience documentation. The audience documentation will be possible with the next version, when all PR come with a proper `prdoc`. ## Assumptions - the prdoc files for release `vX.Y.Z` have been moved under `prdoc/X.Y.Z` - the changelog requires for now for the prdoc files to contain author + topic. Thos fields are optional. The build script can be called as: ``` VERSION=X.Y.Z ./scripts/release/build-changelogs.sh ``` Related: - #1408 --------- Co-authored-by:
EgorPopelyaev <[email protected]>
-
- Dec 06, 2023
-
-
Svyatoslav Nikolsky authored
As suggested in this thread: https://github.com/polkadot-fellows/runtimes/pull/87#discussion_r1400237122 We already have the `IsChildSystemParachain`, which may be used at relay chain, but it can't be used at a parachain level. So let's use `AllSiblingSystemParachains` for that. I was thinking about `AllSystemParachains`, but it may cause wrong impression that it can be used at a relay chain level. --------- Co-authored-by:
joe petrowski <[email protected]>
-
Branislav Kontur authored
## Summary This PR aligns Rococo/Westend bridge with latest Bridges repo development: - https://github.com/paritytech/parity-bridges-common/pull/2727 - https://github.com/paritytech/parity-bridges-common/pull/2728 - https://github.com/paritytech/parity-bridges-common/pull/2729 Part of: https://github.com/paritytech/parity-bridges-common/issues/2452
-
Adrian Catangiu authored
# Motivation (+testing) ### Enable easy `ForeignAssets` transfers using `pallet-xcm` We had just previously added capabilities to teleport fees during reserve-based transfers, but what about reserve-transferring fees when needing to teleport some non-fee asset? This PR aligns everything under either explicit reserve-transfer, explicit teleport, or this new flexible `transfer_assets()` which can mix and match as needed with fewer artificial constraints imposed to the user. This will enable, for example, a (non-system) parachain to teleport their `ForeignAssets` assets to AssetHub while using DOT to pay fees. (the assets are teleported - as foreign assets should from their owner chain - while DOT used for fees can only be reserve-based transferred between said parachain and AssetHub). Added `xcm-emulator` tests for this scenario ^. # Description Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based transfers for all `assets` including fees. Similarly `(limited_)teleport_assets` only allows teleports for all `assets` including fees. For complex combinations of asset transfers where assets and fees may have different reserves or different reserve/teleport trust configurations, users can use the newly added `transfer_assets()` extrinsic which is more flexible in allowing more complex scenarios. `assets` (excluding `fees`) must have same reserve location or otherwise be teleportable to `dest`. No limitations imposed on `fees`. - for local reserve: transfer assets to sovereign account of destination chain and forward a notification XCM to `dest` to mint and deposit reserve-based assets to `beneficiary`. - for destination reserve: burn local assets and forward a notification to `dest` chain to withdraw the reserve assets from this chain's sovereign account and deposit them to `beneficiary`. - for remote reserve: burn local assets, forward XCM to reserve chain to move reserves from this chain's SA to `dest` chain's SA, and forward another XCM to `dest` to mint and deposit reserve-based assets to `beneficiary`. - for teleports: burn local assets and forward XCM to `dest` chain to mint/teleport assets and deposit them to `beneficiary`. ## Review notes Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the rest of the PR is new tests and improving existing tests. --------- Co-authored-by: command-bot <>
-
- Dec 05, 2023
-
-
gupnik authored
-
- Dec 04, 2023
-
-
Serban Iorga authored
Removes obsolete fields from the `QueueConfigData` structure. For the remaining fields, if they use the old defaults, we replace them with the new defaults. Resolves: https://github.com/paritytech/polkadot-sdk/issues/1795
-
- Dec 01, 2023
-
-
Liam Aharon authored
Using taplo, fixes all our broken and inconsistent toml formatting and adds CI to keep them tidy. If people want we can customise the format rules as described here https://taplo.tamasfe.dev/configuration/formatter-options.html @ggwpez , I suggest zepter is used only for checking features are propagated, and leave formatting for taplo to avoid duplicate work and conflicts. TODO - [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet tests instead of deleting the dir --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]>
-
- Nov 30, 2023
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 2 updates: [serde](https://github.com/serde-rs/serde) and [clap](https://github.com/clap-rs/clap). Updates `serde` from 1.0.188 to 1.0.193 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.193</h2> <ul> <li>Fix field names used for the deserialization of <code>RangeFrom</code> and <code>RangeTo</code> (<a href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>, <a href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>, <a href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>, thanks <a href="https://github.com/emilbonnek"><code>@emilbonnek</code></a>)</li> </ul> <h2>v1.0.192</h2> <ul> <li>Allow internal tag field in untagged variant (<a href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>, thanks <a href="https://github.com/robsdedude"><code>@robsdedude</code></a>)</li> </ul> <h2>v1.0.191</h2> <ul> <li>Documentation improvements</li> </ul> <h2>v1.0.190</h2> <ul> <li>Preserve NaN sign when deserializing f32 from f64 or vice versa (<a href="https://redirect.github.com/serde-rs/serde/issues/2637">#2637</a>)</li> </ul> <h2>v1.0.189</h2> <ul> <li>Fix "cannot infer type" error when internally tagged enum contains untagged variant (<a href="https://redirect.github.com/serde-rs/serde/issues/2613">#2613</a>, thanks <a href="https://github.com/ahl"><code>@ahl</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/44613c7d0190dbb5ecd2d5ec19c636f45b7488cc"><code>44613c7</code></a> Release 1.0.193</li> <li><a href="https://github.com/serde-rs/serde/commit/c706281df3c8d50dba1763f19c856df2746eba6c"><code>c706281</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a> from dtolnay/rangestartend</li> <li><a href="https://github.com/serde-rs/serde/commit/65d75b8fe3105f00ab2e01537d568d4587167582"><code>65d75b8</code></a> Add RangeFrom and RangeTo tests</li> <li><a href="https://github.com/serde-rs/serde/commit/332b0cba40bcbcc7a6b23a9706277c54791a9856"><code>332b0cb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a> from dtolnay/rangestartend</li> <li><a href="https://github.com/serde-rs/serde/commit/8c4af412969086bc8f54fdc2a079d373632e0a03"><code>8c4af41</code></a> Fix more RangeFrom / RangeEnd mixups</li> <li><a href="https://github.com/serde-rs/serde/commit/24a78f071b22ae491eec4127be696ac255b9b5d3"><code>24a78f0</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a> from emilbonnek/fix/range-to-from-de-mixup</li> <li><a href="https://github.com/serde-rs/serde/commit/c91c33436d7aaef7472ebc18b734ddc9b5bd11fa"><code>c91c334</code></a> Fix Range{From,To} deserialize mixup</li> <li><a href="https://github.com/serde-rs/serde/commit/2083f43a287cac8302009fda5bbe41518dd83209"><code>2083f43</code></a> Update ui test suite to nightly-2023-11-19</li> <li><a href="https://github.com/serde-rs/serde/commit/4676abdc9e6bbbddfb33a00ce8d7e81e92f01120"><code>4676abd</code></a> Release 1.0.192</li> <li><a href="https://github.com/serde-rs/serde/commit/35700eb23e21d8cb198ef4a422ddad13b855ce3b"><code>35700eb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a> from robsdedude/fix/2643/allow-tag-field-in-untagged</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/serde/compare/v1.0.188...v1.0.193">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.6 to 4.4.10 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.10</h2> <h2>[4.4.10] - 2023-11-28</h2> <h3>Documentation</h3> <ul> <li>Link out to changelog</li> <li>Cross link derive's attribute reference to derive tutorial</li> </ul> <h2>v4.4.9</h2> <h2>[4.4.9] - 2023-11-27</h2> <h3>Fixes</h3> <ul> <li><em>(help)</em> Show correct <code>Command::about</code> under flattened headings</li> <li><em>(help)</em> Respect <code>hide</code> when flattening subcommands</li> </ul> <h2>v4.4.8</h2> <h2>[4.4.8] - 2023-11-10</h2> <h3>Features</h3> <ul> <li>Add <code>Command::flatten_help</code> to allow <code>git stash -h</code> like help for subcommands</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.10] - 2023-11-28</h2> <h3>Documentation</h3> <ul> <li>Link out to changelog</li> <li>Cross link derive's attribute reference to derive tutorial</li> </ul> <h2>[4.4.9] - 2023-11-27</h2> <h3>Fixes</h3> <ul> <li><em>(help)</em> Show correct <code>Command::about</code> under flattened headings</li> <li><em>(help)</em> Respect <code>hide</code> when flattening subcommands</li> </ul> <h2>[4.4.8] - 2023-11-10</h2> <h3>Features</h3> <ul> <li>Add <code>Command::flatten_help</code> to allow <code>git stash -h</code> like help for subcommands</li> </ul> <h2>[4.4.7] - 2023-10-24</h2> <h3>Performance</h3> <ul> <li>Reduced code size</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/c0a1814d3c1d93c18faaedc95fd251846e47f4fe"><code>c0a1814</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/c83e681e20b05f7e128088f47f8fcfc44e8ea166"><code>c83e681</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/91bcac4ca9d442786f554abeb7b1ed6d7a464a42"><code>91bcac4</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5230">#5230</a> from epage/migrate</li> <li><a href="https://github.com/clap-rs/clap/commit/030d87505d150345ddd425c1df21c034d2ae7748"><code>030d875</code></a> docs: Link out to the changelog at the relevant tag</li> <li><a href="https://github.com/clap-rs/clap/commit/b661a9de04aebd1adaaafdbf7e470f07a8d8a36d"><code>b661a9d</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5229">#5229</a> from epage/derive</li> <li><a href="https://github.com/clap-rs/clap/commit/a08587b00e347492165ded1415bad6ab339e9f0b"><code>a08587b</code></a> docs(derive): Link to tutorial sections for attributes</li> <li><a href="https://github.com/clap-rs/clap/commit/21b671f689bc0b8d790dc8c42902c22822bf6f82"><code>21b671f</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/93ba76dbaaf9136313a4fe2978693cc39fa467dd"><code>93ba76d</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/c1c55b30d853446e2cab78664c0d22c1b77d4dfd"><code>c1c55b3</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5228">#5228</a> from epage/flat</li> <li><a href="https://github.com/clap-rs/clap/commit/b13f6d98622b80ba30e63c2c6e65d218cc8a4de3"><code>b13f6d9</code></a> fix(help): Hide 'help' if only flattened subcommand</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.6...v4.4.10 ">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Nov 27, 2023
-
-
Chevdor authored
## Overview This PR aligns the `spec_version` formatting to the [recent changes](https://github.com/polkadot-fellows/runtimes/pull/26/files#diff-efa4caeb17487ecb13d8f5eb7863c3241d84afa2e73fbf25909a2ca89df0f362R142 ) made for the Polkadot/Kusama runtimes. It also backports the latest version `v1.4.0` bumps as `1_004_000`. ## Details During the switch from `v0.9` to `v1.x`, the format of the `spec_version` was modified from: `(M)m_ppp` for a runtime considered on version `M.m.pp`. For instance `0.9.42` had a `spec_version` of `9420`. With the transition to `v1.x`, the format was changed to a bigger number (still `u32`) formatted as `MM_mm_ppp` where `1.2.3` would be stored as `01_02_003`. This PR aligns the format with that has been introduced in the fellowship repo: `MMM_mmm_ppp`. --------- Co-authored-by:
Bastian Köcher <[email protected]>
-
- Nov 24, 2023
-
-
Liam Aharon authored
DMP queue migration is complete and the pallet should be removed to fix the check runtime upgrade CI. <img width="1501" alt="Screenshot 2023-11-24 at 16 05 37" src="https://github.com/paritytech/polkadot-sdk/assets/16665596/ee1da6bb-2756-4423-8085-1e4c73553ad5"> <img width="1501" alt="Screenshot 2023-11-24 at 16 06 44" src="https://github.com/paritytech/polkadot-sdk/assets/16665596/03f3e88f-aed8-4eaa-aab6-7998f72258be">
-
- Nov 17, 2023
-
-
Branislav Kontur authored
This PR fixes two things: - relax `force_default_xcm_version` for testnet system parachains (e.g. BridgeHubWestend has now 2 and there is no way to change it to 3, so we need to call `force_xcm_version(3)` for every parachain that it is connected to, because we send XCMv3 messages) - add `Storage` item to `PolkadotXcm` pallet definition (now we cannot see storage items for `pallet_xcm` in PJS) ## TODO - [ ] when merged open PR to `polkadot-fellows/runtimes` repo
-
- Nov 16, 2023
-
-
joe petrowski authored
Missed in https://github.com/paritytech/polkadot-sdk/pull/1672
-
- Nov 15, 2023
-
-
Branislav Kontur authored
Rococo<>Wococo bridge is replaced by Rococo<Westend bridge, so this PR removes unneeded code. - [x] update bridges subtree after https://github.com/paritytech/parity-bridges-common/pull/2692 --------- Co-authored-by: command-bot <> Co-authored-by:
Svyatoslav Nikolsky <[email protected]>
-
- Nov 14, 2023
-
-
georgepisaltu authored
Fixes https://github.com/paritytech/polkadot-sdk/issues/106 Port of cumulus PR https://github.com/paritytech/cumulus/pull/2960 This PR adds the ability to bid for collator slots even after the max number of collators have already registered. This eliminates the first come, first served mechanism that was in place before. Key changes: - added `update_bond` extrinsic to allow registered candidates to adjust their bonds in order to dynamically control their bids - added `take_candidate_slot` extrinsic to try to replace an already existing candidate by bidding more than them - candidates are now kept in a sorted list in the pallet storage, where the top `DesiredCandidates` out of `MaxCandidates` candidates in the list will be selected by the session pallet as collators - if the candidacy bond is increased through a `set_candidacy_bond` call, candidates which don't meet the new bond requirements are kicked # Checklist - [ ] My PR includes a detailed description as outlined in the "Description" section above - [ ] My PR follows the [labeling requirements](https://github.com/paritytech/polkadot-sdk/blob/master/docs/CONTRIBUTING.md#process ) of this project (at minimum one label for `T` required) - [ ] I have made corresponding changes to the documentation (if applicable) - [ ] I have added tests that prove my fix is effective or that my feature works (if applicable) - [ ] If this PR alters any external APIs or interfaces used by Polkadot, the corresponding Polkadot PR is ready as well as the corresponding Cumulus PR (optional) --------- Signed-off-by:
georgepisaltu <[email protected]>
-
- Nov 13, 2023
-
-
Adrian Catangiu authored
## Motivation `pallet-xcm` is the main user-facing interface for XCM functionality, including assets manipulation functions like `teleportAssets()` and `reserve_transfer_assets()` calls. While `teleportAsset()` works both ways, `reserve_transfer_assets()` works only for sending reserve-based assets to a remote destination and beneficiary when the reserve is the _local chain_. ## Solution This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to support transfers when reserves are other chains. This will allow complete, **bi-directional** reserve-based asset transfers user stories using `pallet-xcm`. Enables following scenarios: - transferring assets with local reserve (was previously supported iff asset used as fee also had local reserve - now it works in all cases), - transferring assets with reserve on destination, - transferring assets with reserve on remote/third-party chain (iff assets and fees have same remote reserve), - transferring assets with reserve different than the reserve of the asset to be used as fees - meaning can be used to transfer random asset with local/dest reserve while using DOT for fees on all involved chains, even if DOT local/dest reserve doesn't match asset reserve, - transferring assets with any type of local/dest reserve while using fees which can be teleported between involved chains. All of the above is done by pallet inner logic without the user having to specify which scenario/reserves/teleports/etc. The correct scenario and corresponding XCM programs are identified, and respectively, built automatically based on runtime configuration of trusted teleporters and trusted reserves. #### Current limitations: - while `fees` and "non-fee" `assets` CAN have different reserves (or fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among themselves, have different reserve locations (this is also implicitly enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely increased in the future). - `fees` and "non-fee" `assets` CANNOT have **different remote** reserves (this could also be supported in the future, but adds even more complexity while possibly not being worth it - we'll see what the future holds). Fixes https://github.com/paritytech/polkadot-sdk/issues/1584 Fixes https://github.com/paritytech/polkadot-sdk/issues/2055 --------- Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]>
-
- Nov 10, 2023
-
-
PG Herveou authored
We are introducing a new set of `XcmController` traits (final name yet to be determined). These traits are implemented by `pallet-xcm` and allows other pallets, such as `pallet_contracts`, to rely on these traits instead of tight coupling them to `pallet-xcm`. Using only the existing Xcm traits would mean duplicating the logic from `pallet-xcm` in these other pallets, which we aim to avoid. Our objective is to ensure that when these APIs are called from `pallet-contracts`, they produce the exact same outcomes as if called directly from `pallet-xcm`. The other benefits is that we can also expose return values to `pallet-contracts` instead of just calling `pallet-xcm` dispatchable and getting a `DispatchResult` back. See traits integration in this PR https://github.com/paritytech/polkadot-sdk/pull/1248 , where the traits are used as follow to define and implement `pallet-contracts` Config. ```rs // Contracts config: pub trait Config: frame_system::Config { // ... /// A type that exposes XCM APIs, allowing contracts to interact with other parachains, and /// execute XCM programs. type Xcm: xcm_executor::traits::Controller< OriginFor<Self>, <Self as frame_system::Config>::RuntimeCall, BlockNumberFor<Self>, >; } // implementation impl pallet_contracts::Config for Runtime { // ... type Xcm = pallet_xcm::Pallet<Self>; } ``` --------- Co-authored-by:
Alexander Theißen <[email protected]> Co-authored-by: command-bot <>
-
- Nov 08, 2023
-
-
Vincent Geddes authored
This PR changes the registration order of the `MessageQueue` pallet so that it is registered last. This is necessary so that the [on_initialize](https://github.com/Snowfork/snowbridge/blob/df8d5da82e517a65fb0858a4f2ead533290336b5/parachain/pallets/outbound-queue/src/lib.rs#L267) hooks for Snowbridge can run before `MessageQueue` delivers messages using its own `on_initialize`. Generally, I think this is preferable regardless of Snowbridge's particular requirements. Other pallets may want to do housekeeping before MessageQueue starts delivering messages. I'm hoping this PR, if accepted, can be included in the same release as https://github.com/paritytech/polkadot-sdk/pull/1246. As otherwise, changing the order of pallet registration is an ABI-breaking change.
-
Adrian Catangiu authored
`bridge-hub-westend-runtime` was added to cumulus/parachains, but wasn't hooked up to xcm-emulator to run tests against it. This commit addresses that ^. Signed-off-by:
Adrian Catangiu <[email protected]>
-
- Nov 03, 2023
-
-
Svyatoslav Nikolsky authored
Right now governance could only control byte-fee component of Rococo <> Westend message fees (paid at Asset Hubs). This PR changes it a bit: 1) governance now allowed to control both fee components - byte fee and base fee; 2) base fee now includes cost of "default" delivery and confirmation transactions, in addition to `ExportMessage` instruction cost.
-
- Nov 02, 2023
-
-
Oliver Tale-Yazdi authored
(imported from https://github.com/paritytech/cumulus/pull/2157) ## Changes This MR refactores the XCMP, Parachains System and DMP pallets to use the [MessageQueue](https://github.com/paritytech/substrate/pull/12485) for delayed execution of incoming messages. The DMP pallet is entirely replaced by the MQ and thereby removed. This allows for PoV-bounded execution and resolves a number of issues that stem from the current work-around. All System Parachains adopt this change. The most important changes are in `primitives/core/src/lib.rs`, `parachains/common/src/process_xcm_message.rs`, `pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs` and the runtime configs. ### DMP Queue Pallet The pallet got removed and its logic refactored into parachain-system. Overweight message management can be done directly through the MQ pallet. Final undeployment migrations are provided by `cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that can be configured with an aux config trait like: ```rust parameter_types! { pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME; pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent; } impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime { type PalletName = DmpQueuePalletName; type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>; type DbWeight = <Runtime as frame_system::Config>::DbWeight; } // And adding them to your Migrations tuple: pub type Migrations = ( ... cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>, cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>, ); ``` ### XCMP Queue pallet Removed all dispatch queue functionality. Incoming XCMP messages are now either: Immediately handled if they are Signals, enqueued into the MQ pallet otherwise. New config items for the XCMP queue pallet: ```rust /// The actual queue implementation that retains the messages for later processing. type XcmpQueue: EnqueueMessage<ParaId>; /// How a XCM over HRMP from a sibling parachain should be processed. type XcmpProcessor: ProcessMessage<Origin = ParaId>; /// The maximal number of suspended XCMP channels at the same time. #[pallet::constant] type MaxInboundSuspended: Get<u32>; ``` How to configure those: ```rust // Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since // the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s. type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>; // Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched // with origin `Junction::Sibling(…)`. type XcmpProcessor = ProcessFromSibling< ProcessXcmMessage< AggregateMessageOrigin, xcm_executor::XcmExecutor<xcm_config::XcmConfig>, RuntimeCall, >, >; // Not really important what to choose here. Just something larger than the maximal number of channels. type MaxInboundSuspended = sp_core::ConstU32<1_000>; ``` The `InboundXcmpStatus` storage item was replaced by `InboundXcmpSuspended` since it now only tracks inbound queue suspension and no message indices anymore. Now only sends the most recent channel `Signals`, as all prio ones are out-dated anyway. ### Parachain System pallet For `DMP` messages instead of forwarding them to the `DMP` pallet, it now pushes them to the configured `DmpQueue`. The message processing which was triggered in `set_validation_data` is now being done by the MQ pallet `on_initialize`. XCMP messages are still handed off to the `XcmpMessageHandler` (XCMP-Queue pallet) - no change here. New config items for the parachain system pallet: ```rust /// Queues inbound downward messages for delayed processing. /// /// Analogous to the `XcmpQueue` of the XCMP queue pallet. type DmpQueue: EnqueueMessage<AggregateMessageOrigin>; ``` How to configure: ```rust /// Use the MQ pallet to store DMP messages for delayed processing. type DmpQueue = MessageQueue; ``` ## Message Flow The flow of messages on the parachain side. Messages come in from the left via the `Validation Data` and finally end up at the `Xcm Executor` on the right. ![Untitled (1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d) ## Further changes - Bumped the default suspension, drop and resume thresholds in `QueueConfigData::default()`. - `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when they would be a noop. - Properly validate the `QueueConfigData` before setting it. - Marked weight files as auto-generated so they wont auto-expand in the MR files view. - Move the `hypothetical` asserts to `frame_support` under the name `experimental_hypothetically` Questions: - [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in the runtimes? Not sure how to best fix. Just having them like this makes tests fail that rely on the real message processor when the feature is enabled. - [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler already takes 80% so I put it to 10% but that is quite low. TODO: - [x] Remove c&p code after https://github.com/paritytech/polkadot/pull/6271 - [x] Use `HandleMessage` once it is public in Substrate - [x] fix `runtime-benchmarks` feature https://github.com/paritytech/polkadot/pull/6966 - [x] Benchmarks - [x] Tests - [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended` - [x] Possibly cleanup Migrations (DMP+XCMP) - [x] optional: create `TransformProcessMessageOrigin` in Substrate and replace `ProcessFromSibling` - [ ] Rerun weights on ref HW --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Kian Paimani <[email protected]> Co-authored-by: command-bot <>
-
- Nov 01, 2023
-
-
Branislav Kontur authored
## Summary Asset bridging support for AssetHub**Rococo** <-> AssetHub**Wococo** was added [here](https://github.com/paritytech/polkadot-sdk/pull/1215), so now we aim to bridge AssetHub**Rococo** and AssetHub**Westend**. (And perhaps retire AssetHubWococo and the Wococo chains). ## Solution **bridge-hub-westend-runtime** - added new runtime as a copy of `bridge-hub-rococo-runtime` - added support for bridging to `BridgeHubRococo` - added tests and benchmarks **bridge-hub-rococo-runtime** - added support for bridging to `BridgeHubWestend` - added tests and benchmarks - internal refactoring by splitting bridge configuration per network, e.g., `bridge_to_whatevernetwork_config.rs`. **asset-hub-rococo-runtime** - added support for asset bridging to `AssetHubWestend` (allows to receive only WNDs) - added new xcm router for `Westend` - added tests and benchmarks **asset-hub-westend-runtime** - added support for asset bridging to `AssetHubRococo` (allows to receive only ROCs) - added new xcm router for `Rococo` - added tests and benchmarks ## Deployment All changes will be deployed as a part of https://github.com/paritytech/polkadot-sdk/issues/1988. ## TODO - [x] benchmarks for all pallet instances - [x] integration tests - [x] local run scripts Relates to: https://github.com/paritytech/parity-bridges-common/issues/2602 Relates to: https://github.com/paritytech/polkadot-sdk/issues/1988 --------- Co-authored-by: command-bot <> Co-authored-by:
Adrian Catangiu <[email protected]> Co-authored-by:
joe petrowski <[email protected]>
-
Serban Iorga authored
-
- Oct 31, 2023
-
-
Lulu authored
Co-authored-by:
Sergejs Kostjucenko <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]>
-
- Oct 27, 2023
-
-
Liam Aharon authored
Closes https://github.com/paritytech/release-engineering/issues/6 Adds a new Github Workflow which on a new release being created, builds and attaches all runtimes managed in this repository in two flavours: - `dev-debug-build`: Built with the `try-runtime` feature and has logging enabled - `on-chain-release`: Built with the regular old `on-chain-release` feature The new Github Workflow could be extended in the future by the @paritytech/release-engineering team to fully automate the release process if they choose to, similar to how it is fully automated in the Fellowship repo (https://github.com/polkadot-fellows/runtimes/blob/main/.github/workflows/release.yml). The `on-chain-release` did not exist for parachains, so I added it. --- Tested on my fork: - https://github.com/liamaharon/polkadot-sdk/actions/runs/6663773523 - https://github.com/liamaharon/polkadot-sdk/releases/tag/test-6 --------- Co-authored-by:
Chevdor <[email protected]> Co-authored-by:
Dónal Murray <[email protected]>
-
- Oct 25, 2023
-
-
Branislav Kontur authored
[testnet] Align testnet system parachain runtimes using `RelayTreasuryLocation` and `SystemParachains` in the same way (#2023) This PR addresses several issues: - simplify referencing `RelayTreasuryLocation` without needing additional `RelayTreasury` struct - fix for referencing `SystemParachains` from parachain with `parents: 1` instead of `parents: 0` - removed hard-coded constants and fix tests for `asset-hub-rococo` which was merged to master after https://github.com/paritytech/polkadot-sdk/pull/1726 --------- Co-authored-by: command-bot <>
-
- Oct 24, 2023
-
-
Kian Paimani authored
closes https://github.com/paritytech/polkadot-sdk/issues/1882 ## Breaking Changes This PR introduces a new item to `pallet_balances::Config`: ```diff trait Config { ++ type RuntimeFreezeReasons; } ``` This value is only used to check it against `type MaxFreeze`. A similar check has been added for `MaxHolds` against `RuntimeHoldReasons`, which is already given to `pallet_balances`. In all contexts, you should pass the real `RuntimeFreezeReasons` generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing `()` would also work, but it would imply that the runtime uses no freezes at all. --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Oliver Tale-Yazdi <[email protected]>
-
- Oct 23, 2023
-
-
Branislav Kontur authored
This PR does not introduce any functional changes to the existing code, it merely addresses several minor refactors: - Moving bridging pallets to separate files. - Improving the readability and naming of weight files for bridging pallets and bridging pallet instances. The reason for this refactor is to facilitate easier plugin integration for the upcoming bridge between Rococo and Westend. --------- Co-authored-by: command-bot <>
-
Branislav Kontur authored
## Problem This PR addresses the issue with testnet AssetHub builds, which was discovered during the execution of `bot bench`. https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038738 ``` Compiling asset-hub-rococo-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-rococo-runtime) warning: Linking globals named 'Core_version': symbol multiply defined! error: failed to load bitcode of module "rococo_runtime-8799ee884447805a.rococo_runtime.0bc572b8-cgu.0.rcgu.o": warning: `asset-hub-rococo-runtime-wasm` (lib) generated 1 warning error: could not compile `asset-hub-rococo-runtime-wasm` (lib) due to previous error; 1 warning emitted ``` https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038739 ``` Compiling asset-hub-westend-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-westend-runtime) warning: Linking globals named 'Core_version': symbol multiply defined! error: failed to load bitcode of module "westend_runtime-86d7844430f97d5c.westend_runtime.b7678d03-cgu.0.rcgu.o": warning: `asset-hub-westend-runtime-wasm` (lib) generated 1 warning error: could not compile `asset-hub-westend-runtime-wasm` (lib) due to previous error; 1 warning emitted ``` ## Solution - Removed dependencies on `rococo-runtime` and `westend-runtime` introduced by [this PR](https://github.com/paritytech/polkadot-sdk/pull/1234/files#diff-a86375df98e04ca3cce1ea35c40257a222e2d5087f5f528ff33307678b78dc2dR534-R550). - Replaced `<rococo_runtime::Treasury as PalletInfoAccess>::index()` with `rococo_runtime_constants::TREASURY_PALLET_ID`. - Added `check_treasury_pallet_id` to the relay runtimes to ensure that the constant is aligned with the pallet id. - Added "Rococo Treasury" to the waived locations (that will not be charged fees in the executor) for `BridgeHubRococo` (to be aligned with AssetHubs). ## References [Full element discussion here](https://matrix.to/#/!JUeaZUiYbdrvzvtwSL:parity.io/$2PnjYMsWRjR7M3oOfGuRI0XkjdoqJLtRcAPVcDLuLVg?via=parity.io&via=web3.foundation). --------- Co-authored-by: command-bot <>
-
- Oct 20, 2023
-
-
Bastian Köcher authored
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to crates.io as someone as squatted `xcm`. The problem with this rename is that the `TypeInfo` includes the crate name which ultimately lands in the metadata. The metadata is consumed by downstream users like `polkadot-js` or people building on top of `polkadot-js`. These people are using the entire `path` to find the type in the type registry. Thus, their code would break as the type path would now be [`staging_xcm`, `VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request fixes this by renaming the path segment `staging_xcm` to `xcm`. This requires: https://github.com/paritytech/scale-info/pull/197 --------- Co-authored-by:
Francisco Aguirre <[email protected]>
-
- Oct 18, 2023
-
-
Keith Yeung authored
Combination of paritytech/polkadot#7005, its addon PR paritytech/polkadot#7585 and its companion paritytech/cumulus#2433. This PR introduces a new XcmFeesToAccount struct which implements the `FeeManager` trait, and assigns this struct as the `FeeManager` in the XCM config for all runtimes. The struct simply deposits all fees handled by the XCM executor to a specified account. In all runtimes, the specified account is configured as the treasury account. XCM __delivery__ fees are now being introduced (unless the root origin is sending a message to a system parachain on behalf of the originating chain). # Note for reviewers Most file changes are tests that had to be modified to account for the new fees. Main changes are in: - cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery fees exponential factor - polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the FeeManager implementation - All runtime xcm_config files <- To add the FeeManager to the XCM configuration # Important note After this change, instructions that create and send a new XCM (Query*, Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport, DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock) will require the corresponding origin account in the origin register to pay for transport delivery fees, and the onward message will fail to be sent if the origin account does not have the required amount. This delivery fee is on top of what we already collect as tx fees in pallet-xcm and XCM BuyExecution fees! Wallet UIs that want to expose the new delivery fee can do so using the formula: ``` delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee) ``` where the delivery fee factor can be obtained from the corresponding pallet based on which transport you are using (UMP, HRMP or bridges), the base fee is a constant, the encoded message length from the message itself and the per byte fee is the same as the configured per byte fee for txs (i.e. `TransactionByteFee`). --------- Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Giles Cope <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
Kian Paimani <[email protected]>
-
Adrian Catangiu authored
cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add asset-bridging support to it (#1215) This commit adds Rococo Asset Hub dedicated runtime so we can test new features here, before merging them in Kusama Asset Hub. Also adds one such feature: asset transfer over bridge (Rococo AssetHub <> Wococo AssetHub) - clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime` - make it use Rococo primitives, names, assets, constants, etc - add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo AssetHub Fixes #1128 --------- Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]>
-
- Oct 16, 2023
-
-
Ignacio Palacios authored
Make System Parachain trusted Teleporters of each other. Migration of https://github.com/paritytech/cumulus/pull/2842 --------- Co-authored-by: command-bot <> Co-authored-by:
joe petrowski <[email protected]>
-
- Oct 10, 2023
-
-
Branislav Kontur authored
[xcm] Use `Weight::MAX` for `reserve_asset_deposited`, `receive_teleported_asset` benchmarks (#1726) # Description ## Summary Previously, the `pallet_xcm::do_reserve_transfer_assets` and `pallet_xcm::do_teleport_assets` functions relied on weight estimation for remote chain execution, which was based on guesswork derived from the local chain. This approach led to complications for runtimes that did not provide or support specific [XCM configurations](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/polkadot/xcm/xcm-executor/src/config.rs#L43-L47) for `IsReserve` or `IsTeleporter`. Consequently, such runtimes had to resort to implementing hard-coded weights for XCM instructions like `reserve_asset_deposited` or `receive_teleported_asset` to support extrinsics such as `pallet_xcm::reserve_transfer_assets` and `pallet_xcm::teleport_assets`, which depended on remote weight estimation. The issue of remote weight estimation was addressed and resolved by [Pull Request #1645](https://github.com/paritytech/polkadot-sdk/pull/1645), which removed the need for remote weight estimation. ## Solution As a continuation of this improvement, the current PR proposes further cleanup by removing unnecessary hard-coded values and rectifying benchmark results with `Weight::MAX` that previously used `T::BlockWeights::get().max_block` as an override for unsupported XCM instructions like `ReserveAssetDeposited` and `ReceiveTeleportedAsset`. ## Questions - [x] Can we remove now also `Hardcoded till the XCM pallet is fixed` for `deposit_asset`? E.g. for AssetHubKusama [here](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/cumulus/parachains/runtimes/assets/asset-hub-kusama/src/weights/xcm/mod.rs#L129-L134) - [x] Are comments like [this](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/polkadot/runtime/kusama/src/weights/xcm/mod.rs#L94) `// Kusama doesn't support ReserveAssetDeposited, so this benchmark has a default weight` still relevant? Shouldnt be removed/changed? ## TODO - [x] `bench bot` regenerate xcm weights for all runtimes - [x] remove hard-coded stuff from system parachain weight files - [ ] when merged, open `polkadot-fellow/runtimes` PR ## References Fixes #1132 Closes #1132 Old polkadot repo [PR](https://github.com/paritytech/polkadot/pull/7546) --------- Co-authored-by: command-bot <>
-