- Dec 06, 2023
-
-
Svyatoslav Nikolsky authored
As suggested in this thread: https://github.com/polkadot-fellows/runtimes/pull/87#discussion_r1400237122 We already have the `IsChildSystemParachain`, which may be used at relay chain, but it can't be used at a parachain level. So let's use `AllSiblingSystemParachains` for that. I was thinking about `AllSystemParachains`, but it may cause wrong impression that it can be used at a relay chain level. --------- Co-authored-by:
joe petrowski <[email protected]>
-
Branislav Kontur authored
## Summary This PR aligns Rococo/Westend bridge with latest Bridges repo development: - https://github.com/paritytech/parity-bridges-common/pull/2727 - https://github.com/paritytech/parity-bridges-common/pull/2728 - https://github.com/paritytech/parity-bridges-common/pull/2729 Part of: https://github.com/paritytech/parity-bridges-common/issues/2452
-
Adrian Catangiu authored
# Motivation (+testing) ### Enable easy `ForeignAssets` transfers using `pallet-xcm` We had just previously added capabilities to teleport fees during reserve-based transfers, but what about reserve-transferring fees when needing to teleport some non-fee asset? This PR aligns everything under either explicit reserve-transfer, explicit teleport, or this new flexible `transfer_assets()` which can mix and match as needed with fewer artificial constraints imposed to the user. This will enable, for example, a (non-system) parachain to teleport their `ForeignAssets` assets to AssetHub while using DOT to pay fees. (the assets are teleported - as foreign assets should from their owner chain - while DOT used for fees can only be reserve-based transferred between said parachain and AssetHub). Added `xcm-emulator` tests for this scenario ^. # Description Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based transfers for all `assets` including fees. Similarly `(limited_)teleport_assets` only allows teleports for all `assets` including fees. For complex combinations of asset transfers where assets and fees may have different reserves or different reserve/teleport trust configurations, users can use the newly added `transfer_assets()` extrinsic which is more flexible in allowing more complex scenarios. `assets` (excluding `fees`) must have same reserve location or otherwise be teleportable to `dest`. No limitations imposed on `fees`. - for local reserve: transfer assets to sovereign account of destination chain and forward a notification XCM to `dest` to mint and deposit reserve-based assets to `beneficiary`. - for destination reserve: burn local assets and forward a notification to `dest` chain to withdraw the reserve assets from this chain's sovereign account and deposit them to `beneficiary`. - for remote reserve: burn local assets, forward XCM to reserve chain to move reserves from this chain's SA to `dest` chain's SA, and forward another XCM to `dest` to mint and deposit reserve-based assets to `beneficiary`. - for teleports: burn local assets and forward XCM to `dest` chain to mint/teleport assets and deposit them to `beneficiary`. ## Review notes Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the rest of the PR is new tests and improving existing tests. --------- Co-authored-by: command-bot <>
-
- Dec 05, 2023
-
-
gupnik authored
-
- Dec 04, 2023
-
-
Serban Iorga authored
Removes obsolete fields from the `QueueConfigData` structure. For the remaining fields, if they use the old defaults, we replace them with the new defaults. Resolves: https://github.com/paritytech/polkadot-sdk/issues/1795
-
- Dec 01, 2023
-
-
Liam Aharon authored
Using taplo, fixes all our broken and inconsistent toml formatting and adds CI to keep them tidy. If people want we can customise the format rules as described here https://taplo.tamasfe.dev/configuration/formatter-options.html @ggwpez , I suggest zepter is used only for checking features are propagated, and leave formatting for taplo to avoid duplicate work and conflicts. TODO - [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet tests instead of deleting the dir --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]>
-
- Nov 30, 2023
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 2 updates: [serde](https://github.com/serde-rs/serde) and [clap](https://github.com/clap-rs/clap). Updates `serde` from 1.0.188 to 1.0.193 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.193</h2> <ul> <li>Fix field names used for the deserialization of <code>RangeFrom</code> and <code>RangeTo</code> (<a href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>, <a href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>, <a href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>, thanks <a href="https://github.com/emilbonnek"><code>@emilbonnek</code></a>)</li> </ul> <h2>v1.0.192</h2> <ul> <li>Allow internal tag field in untagged variant (<a href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>, thanks <a href="https://github.com/robsdedude"><code>@robsdedude</code></a>)</li> </ul> <h2>v1.0.191</h2> <ul> <li>Documentation improvements</li> </ul> <h2>v1.0.190</h2> <ul> <li>Preserve NaN sign when deserializing f32 from f64 or vice versa (<a href="https://redirect.github.com/serde-rs/serde/issues/2637">#2637</a>)</li> </ul> <h2>v1.0.189</h2> <ul> <li>Fix "cannot infer type" error when internally tagged enum contains untagged variant (<a href="https://redirect.github.com/serde-rs/serde/issues/2613">#2613</a>, thanks <a href="https://github.com/ahl"><code>@ahl</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/44613c7d0190dbb5ecd2d5ec19c636f45b7488cc"><code>44613c7</code></a> Release 1.0.193</li> <li><a href="https://github.com/serde-rs/serde/commit/c706281df3c8d50dba1763f19c856df2746eba6c"><code>c706281</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a> from dtolnay/rangestartend</li> <li><a href="https://github.com/serde-rs/serde/commit/65d75b8fe3105f00ab2e01537d568d4587167582"><code>65d75b8</code></a> Add RangeFrom and RangeTo tests</li> <li><a href="https://github.com/serde-rs/serde/commit/332b0cba40bcbcc7a6b23a9706277c54791a9856"><code>332b0cb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a> from dtolnay/rangestartend</li> <li><a href="https://github.com/serde-rs/serde/commit/8c4af412969086bc8f54fdc2a079d373632e0a03"><code>8c4af41</code></a> Fix more RangeFrom / RangeEnd mixups</li> <li><a href="https://github.com/serde-rs/serde/commit/24a78f071b22ae491eec4127be696ac255b9b5d3"><code>24a78f0</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a> from emilbonnek/fix/range-to-from-de-mixup</li> <li><a href="https://github.com/serde-rs/serde/commit/c91c33436d7aaef7472ebc18b734ddc9b5bd11fa"><code>c91c334</code></a> Fix Range{From,To} deserialize mixup</li> <li><a href="https://github.com/serde-rs/serde/commit/2083f43a287cac8302009fda5bbe41518dd83209"><code>2083f43</code></a> Update ui test suite to nightly-2023-11-19</li> <li><a href="https://github.com/serde-rs/serde/commit/4676abdc9e6bbbddfb33a00ce8d7e81e92f01120"><code>4676abd</code></a> Release 1.0.192</li> <li><a href="https://github.com/serde-rs/serde/commit/35700eb23e21d8cb198ef4a422ddad13b855ce3b"><code>35700eb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a> from robsdedude/fix/2643/allow-tag-field-in-untagged</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/serde/compare/v1.0.188...v1.0.193">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.6 to 4.4.10 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.10</h2> <h2>[4.4.10] - 2023-11-28</h2> <h3>Documentation</h3> <ul> <li>Link out to changelog</li> <li>Cross link derive's attribute reference to derive tutorial</li> </ul> <h2>v4.4.9</h2> <h2>[4.4.9] - 2023-11-27</h2> <h3>Fixes</h3> <ul> <li><em>(help)</em> Show correct <code>Command::about</code> under flattened headings</li> <li><em>(help)</em> Respect <code>hide</code> when flattening subcommands</li> </ul> <h2>v4.4.8</h2> <h2>[4.4.8] - 2023-11-10</h2> <h3>Features</h3> <ul> <li>Add <code>Command::flatten_help</code> to allow <code>git stash -h</code> like help for subcommands</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.10] - 2023-11-28</h2> <h3>Documentation</h3> <ul> <li>Link out to changelog</li> <li>Cross link derive's attribute reference to derive tutorial</li> </ul> <h2>[4.4.9] - 2023-11-27</h2> <h3>Fixes</h3> <ul> <li><em>(help)</em> Show correct <code>Command::about</code> under flattened headings</li> <li><em>(help)</em> Respect <code>hide</code> when flattening subcommands</li> </ul> <h2>[4.4.8] - 2023-11-10</h2> <h3>Features</h3> <ul> <li>Add <code>Command::flatten_help</code> to allow <code>git stash -h</code> like help for subcommands</li> </ul> <h2>[4.4.7] - 2023-10-24</h2> <h3>Performance</h3> <ul> <li>Reduced code size</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/c0a1814d3c1d93c18faaedc95fd251846e47f4fe"><code>c0a1814</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/c83e681e20b05f7e128088f47f8fcfc44e8ea166"><code>c83e681</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/91bcac4ca9d442786f554abeb7b1ed6d7a464a42"><code>91bcac4</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5230">#5230</a> from epage/migrate</li> <li><a href="https://github.com/clap-rs/clap/commit/030d87505d150345ddd425c1df21c034d2ae7748"><code>030d875</code></a> docs: Link out to the changelog at the relevant tag</li> <li><a href="https://github.com/clap-rs/clap/commit/b661a9de04aebd1adaaafdbf7e470f07a8d8a36d"><code>b661a9d</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5229">#5229</a> from epage/derive</li> <li><a href="https://github.com/clap-rs/clap/commit/a08587b00e347492165ded1415bad6ab339e9f0b"><code>a08587b</code></a> docs(derive): Link to tutorial sections for attributes</li> <li><a href="https://github.com/clap-rs/clap/commit/21b671f689bc0b8d790dc8c42902c22822bf6f82"><code>21b671f</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/93ba76dbaaf9136313a4fe2978693cc39fa467dd"><code>93ba76d</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/c1c55b30d853446e2cab78664c0d22c1b77d4dfd"><code>c1c55b3</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5228">#5228</a> from epage/flat</li> <li><a href="https://github.com/clap-rs/clap/commit/b13f6d98622b80ba30e63c2c6e65d218cc8a4de3"><code>b13f6d9</code></a> fix(help): Hide 'help' if only flattened subcommand</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.6...v4.4.10 ">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Nov 29, 2023
-
-
PG Herveou authored
see #2189 This PR does the following: - Bring the user api functions into a new pallet-contracts-uapi (They are currently defined in ink! [here])(https://github.com/paritytech/ink/blob/master/crates/env/src/engine/on_chain/ext.rs ) - Add older api versions and unstable to the user api trait. - Remove pallet-contracts-primitives and bring the types it defined in uapi / pallet-contracts - Add the infrastructure to build fixtures from Rust files and test it works by replacing `dummy.wat` and `call.wat` - Move all the doc from wasm/runtime.rs to pallet-contracts-uapi. This will be done in a follow up: - convert the rest of the test from .wat to rust - bring risc-v uapi up to date with wasm - finalize the uapi host fns, making sure everything is codegen from the source host fns in pallet-contracts --------- Co-authored-by:
Alexander Theißen <[email protected]>
-
Tom Mi authored
rotko networks parachain bootnodes ``` # array of commands for testing parachains=( "./polkadot-parachain --chain asset-hub-polkadot --reserved-only --reserved-nodes /dns/mint14.rotko.net/tcp/33514/p2p/12D3KooWKkzLjYF6M5eEs7nYiqEtRqY8SGVouoCwo3nCWsRnThDW --no-hardware-benchmarks" "./polkadot-parachain --chain asset-hub-polkadot --reserved-only --reserved-nodes /dns/mint14.rotko.net/tcp/34514/ws/p2p/12D3KooWKkzLjYF6M5eEs7nYiqEtRqY8SGVouoCwo3nCWsRnThDW --no-hardware-benchmarks" "./polkadot-parachain --chain asset-hub-polkadot --reserved-only --reserved-nodes /dns/mint14.rotko.net/tcp/35514/wss/p2p/12D3KooWKkzLjYF6M5eEs7nYiqEtRqY8SGVouoCwo3nCWsRnThDW --no-hardware-benchmarks" "./polkadot-parachain --chain asset-hub-kusama --reserved-only --reserved-nodes /dns/mine14.rotko.net/tcp/33524/p2p/12D3KooWJUFnjR2PNbsJhudwPVaWCoZy1acPGKjM2cSuGj345BBu --no-hardware-benchmarks" "./polkadot-parachain --chain asset-hub-kusama --reserved-only --reserved-nodes /dns/mine14.rotko.net/tcp/34524/ws/p2p/12D3KooWJUFnjR2PNbsJhudwPVaWCoZy1acPGKjM2cSuGj345BBu --no-hardware-benchmarks" "./polkadot-parachain --chain asset-hub-kusama --reserved-only --reserved-nodes /dns/mine14.rotko.net/tcp/35524/wss/p2p/12D3KooWJUFnjR2PNbsJhudwPVaWCoZy1acPGKjM2cSuGj345BBu --no-hardware-benchmarks" "./polkadot-parachain --chain asset-hub-westend --reserved-only --reserved-nodes /dns/wmint14.rotko.net/tcp/33534/p2p/12D3KooWE4UDXqgtTcMCyUQ8S4uvaT8VMzzTBA6NWmKuYwTacWuN --no-hardware-benchmarks" "./polkadot-parachain --chain asset-hub-westend --reserved-only --reserved-nodes /dns/wmint14.rotko.net/tcp/34534/ws/p2p/12D3KooWE4UDXqgtTcMCyUQ8S4uvaT8VMzzTBA6NWmKuYwTacWuN --no-hardware-benchmarks" "./polkadot-parachain --chain asset-hub-westend --reserved-only --reserved-nodes /dns/wmint14.rotko.net/tcp/35534/wss/p2p/12D3KooWE4UDXqgtTcMCyUQ8S4uvaT8VMzzTBA6NWmKuYwTacWuN --no-hardware-benchmarks" "./polkadot-parachain --chain bridge-hub-polkadot --reserved-only --reserved-nodes /dns/pbr13.rotko.net/tcp/33543/p2p/12D3KooWMxZY7tDc2Rh454VaJJ7RexKAXVS6xSBEvTnXSGCnuGDw --no-hardware-benchmarks" "./polkadot-parachain --chain bridge-hub-polkadot --reserved-only --reserved-nodes /dns/pbr13.rotko.net/tcp/34543/ws/p2p/12D3KooWMxZY7tDc2Rh454VaJJ7RexKAXVS6xSBEvTnXSGCnuGDw --no-hardware-benchmarks" "./polkadot-parachain --chain bridge-hub-polkadot --reserved-only --reserved-nodes /dns/pbr13.rotko.net/tcp/35543/wss/p2p/12D3KooWMxZY7tDc2Rh454VaJJ7RexKAXVS6xSBEvTnXSGCnuGDw --no-hardware-benchmarks" "./polkadot-parachain --chain bridge-hub-kusama --reserved-only --reserved-nodes /dns/kbr13.rotko.net/tcp/33553/p2p/12D3KooWAmBp54mUEYtvsk2kxNEsDbAvdUMcaghxKXgUQxmPEQ66 --no-hardware-benchmarks" "./polkadot-parachain --chain bridge-hub-kusama --reserved-only --reserved-nodes /dns/kbr13.rotko.net/tcp/34553/ws/p2p/12D3KooWAmBp54mUEYtvsk2kxNEsDbAvdUMcaghxKXgUQxmPEQ66 --no-hardware-benchmarks" "./polkadot-parachain --chain bridge-hub-kusama --reserved-only --reserved-nodes /dns/kbr13.rotko.net/tcp/35553/wss/p2p/12D3KooWAmBp54mUEYtvsk2kxNEsDbAvdUMcaghxKXgUQxmPEQ66 --no-hardware-benchmarks" "./polkadot-parachain --chain bridge-hub-westend --reserved-only --reserved-nodes /dns/wbr13.rotko.net/tcp/33563/p2p/12D3KooWJyeRHpxZZbfBCNEgeUFzmRC5AMSAs2tJhjJS1k5hULkD --no-hardware-benchmarks" "./polkadot-parachain --chain bridge-hub-westend --reserved-only --reserved-nodes /dns/wbr13.rotko.net/tcp/34563/ws/p2p/12D3KooWJyeRHpxZZbfBCNEgeUFzmRC5AMSAs2tJhjJS1k5hULkD --no-hardware-benchmarks" "./polkadot-parachain --chain bridge-hub-westend --reserved-only --reserved-nodes /dns/wbr13.rotko.net/tcp/35563/wss/p2p/12D3KooWJyeRHpxZZbfBCNEgeUFzmRC5AMSAs2tJhjJS1k5hULkD --no-hardware-benchmarks" "./polkadot-parachain --chain collectives-polkadot --reserved-only --reserved-nodes /dns/pch13.rotko.net/tcp/33573/wss/p2p/12D3KooWRXudHoazPZ9osMfdY38e8CBxQLD4RhrVeHpRSNNpcDtH --no-hardware-benchmarks" "./polkadot-parachain --chain collectives-polkadot --reserved-only --reserved-nodes /dns/pch13.rotko.net/tcp/34573/wss/p2p/12D3KooWRXudHoazPZ9osMfdY38e8CBxQLD4RhrVeHpRSNNpcDtH --no-hardware-benchmarks" "./polkadot-parachain --chain collectives-polkadot --reserved-only --reserved-nodes /dns/pch13.rotko.net/tcp/35573/wss/p2p/12D3KooWRXudHoazPZ9osMfdY38e8CBxQLD4RhrVeHpRSNNpcDtH --no-hardware-benchmarks" "./polkadot-parachain --chain collectives-westend --reserved-only --reserved-nodes /dns/wch13.rotko.net/tcp/33593/p2p/12D3KooWPG85zhuSRoyptjLkFD4iJFistjiBmc15JgQ96B4fdXYr --no-hardware-benchmarks" "./polkadot-parachain --chain collectives-westend --reserved-only --reserved-nodes /dns/wch13.rotko.net/tcp/34593/ws/p2p/12D3KooWPG85zhuSRoyptjLkFD4iJFistjiBmc15JgQ96B4fdXYr --no-hardware-benchmarks" "./polkadot-parachain --chain collectives-westend --reserved-only --reserved-nodes /dns/wch13.rotko.net/tcp/35593/wss/p2p/12D3KooWPG85zhuSRoyptjLkFD4iJFistjiBmc15JgQ96B4fdXYr --no-hardware-benchmarks" ) ```
-
Dónal Murray authored
Since the Polkadot and Kusama runtimes are no longer in the repo, the relevant systems parachains runtimes also need to be removed. More context [here](https://github.com/paritytech/polkadot-sdk/issues/603) and [here](https://github.com/paritytech/polkadot-sdk/pull/1731). Removes the following: - `asset-hub-kusama` and `asset-hub-polkadot` - `bridge-hub-kusama` and `bridge-hub-polkadot` - `collectives-polkadot` - `glutton-kusama` Partially solves #603 and adds to #1731.
-
Liam Aharon authored
Westend SP dmp queue pallet removal is complete. <img width="1499" alt="Screenshot 2023-11-28 at 08 31 27" src="https://github.com/paritytech/polkadot-sdk/assets/16665596/906246fb-3de9-4133-a827-431636a097ad"> <img width="1499" alt="Screenshot 2023-11-28 at 08 32 08" src="https://github.com/paritytech/polkadot-sdk/assets/16665596/bde84891-b044-42c7-9a0b-59125cd24db1"> <img width="1499" alt="Screenshot 2023-11-28 at 08 31 45" src="https://github.com/paritytech/polkadot-sdk/assets/16665596/38337484-0856-45c0-b9ff-8c785bc3c0e3">
-
- Nov 28, 2023
-
-
s0me0ne-unkn0wn authored
Co-authored-by:
ordian <[email protected]> Co-authored-by:
Vladimir Istyufeev <[email protected]>
-
gupnik authored
Step in https://github.com/paritytech/polkadot-sdk/issues/171 This PR adds `derive_impl` on all `frame_system` config impls for mock runtimes. The overridden configs are maintained as of now to ensure minimal changes. --------- Co-authored-by:
Oliver Tale-Yazdi <[email protected]>
-
- Nov 27, 2023
-
-
Adrian Catangiu authored
Just adds more tests.
-
Chevdor authored
## Overview This PR aligns the `spec_version` formatting to the [recent changes](https://github.com/polkadot-fellows/runtimes/pull/26/files#diff-efa4caeb17487ecb13d8f5eb7863c3241d84afa2e73fbf25909a2ca89df0f362R142 ) made for the Polkadot/Kusama runtimes. It also backports the latest version `v1.4.0` bumps as `1_004_000`. ## Details During the switch from `v0.9` to `v1.x`, the format of the `spec_version` was modified from: `(M)m_ppp` for a runtime considered on version `M.m.pp`. For instance `0.9.42` had a `spec_version` of `9420`. With the transition to `v1.x`, the format was changed to a bigger number (still `u32`) formatted as `MM_mm_ppp` where `1.2.3` would be stored as `01_02_003`. This PR aligns the format with that has been introduced in the fellowship repo: `MMM_mmm_ppp`. --------- Co-authored-by:
Bastian Köcher <[email protected]>
-
- Nov 24, 2023
-
-
Liam Aharon authored
DMP queue migration is complete and the pallet should be removed to fix the check runtime upgrade CI. <img width="1501" alt="Screenshot 2023-11-24 at 16 05 37" src="https://github.com/paritytech/polkadot-sdk/assets/16665596/ee1da6bb-2756-4423-8085-1e4c73553ad5"> <img width="1501" alt="Screenshot 2023-11-24 at 16 06 44" src="https://github.com/paritytech/polkadot-sdk/assets/16665596/03f3e88f-aed8-4eaa-aab6-7998f72258be">
-
Xiliang Chen authored
On extrinsics/call, ensure local XCM execution is complete/successful. Otherwise, fail the extrinsic so that state changes don't get committed to the db. Added regression tests that fail without the fix. fixes #2237 --------- Co-authored-by:
Adrian Catangiu <[email protected]>
-
- Nov 23, 2023
-
-
Liam Aharon authored
Collectives Westend is missing an `on-chain-release-build` feature flag.
-
- Nov 21, 2023
-
-
Sophia Gold authored
This updates the tick runtime and polkadot-parachain collator to use async backing.
-
- Nov 17, 2023
-
-
Liam Aharon authored
Westend Collectives migration CI check can be fixed once we have https://github.com/paritytech/try-runtime-cli/pull/58, will open another PR once it is available. - [x] Remove deprecated `DmpQueue` pallet from Rococo Contracts, the migration is complete - [x] Fix Asset Hub Rococo storage versions - [x] Add migration check CI for Asset Hub Rococo and Westend Bridge Hub
-
Branislav Kontur authored
This PR fixes two things: - relax `force_default_xcm_version` for testnet system parachains (e.g. BridgeHubWestend has now 2 and there is no way to change it to 3, so we need to call `force_xcm_version(3)` for every parachain that it is connected to, because we send XCMv3 messages) - add `Storage` item to `PolkadotXcm` pallet definition (now we cannot see storage items for `pallet_xcm` in PJS) ## TODO - [ ] when merged open PR to `polkadot-fellows/runtimes` repo
-
Adrian Catangiu authored
Fix some incorrect doc-comments
-
- Nov 16, 2023
-
-
joe petrowski authored
Missed in https://github.com/paritytech/polkadot-sdk/pull/1672
-
- Nov 15, 2023
-
-
Branislav Kontur authored
Rococo<>Wococo bridge is replaced by Rococo<Westend bridge, so this PR removes unneeded code. - [x] update bridges subtree after https://github.com/paritytech/parity-bridges-common/pull/2692 --------- Co-authored-by: command-bot <> Co-authored-by:
Svyatoslav Nikolsky <[email protected]>
-
Adrian Catangiu authored
Refunding surplus happens anyway on xcm_executor::post_process(), automatically refunding surplus to original_origin at the end of execution. Since SovereignPaidRemoteExporter doesn't ClearOrigin, it can simply rely on the automatic mechanism. Furthermore, RefundSurplus instruction refunds _surplus_. Surplus exists only as a result of Transact, SetErrorHandler or SetAppendix instructions, none of which being part of the SovereignPaidRemoteExporter XCM program. So surplus is always zero here anyway.
-
Dónal Murray authored
Add collectives and glutton parachain westend runtimes to prepare for #1737. The removal of system parachain native runtimes #1737 is blocked until chainspecs and runtime APIs can be dealt with cleanly (merge of #1256 and follow up PRs). In the meantime, these additions are ready to be merged to `master`, so I have separated them out into this PR. Also marked `bridge-hub-westend` as unimplemented in line with [this issue](https://github.com/paritytech/parity-bridges-common/issues/2602 ). TODO - [x] add to `command-bot` benchmarks - [x] add to `command-bot-scripts` benchmarks - [x] generate weights --------- Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Muharem <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]>
-
- Nov 14, 2023
-
-
PG Herveou authored
This PR introduces: - XCM host functions `xcm_send`, `xcm_execute` - An Xcm trait into the config. that proxy these functions to to `pallet_xcm`, or disable their usage by using `()`. - A mock_network and xcm_test files to test the newly added xcm-related functions. --------- Co-authored-by:
Keith Yeung <[email protected]> Co-authored-by:
Sasha Gryaznov <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by:
Alexander Theißen <[email protected]>
-
Alin Dima authored
Adds a `NodeFeatures` bitfield value to the runtime `HostConfiguration`, with the purpose of coordinating the enabling of node-side features, such as: https://github.com/paritytech/polkadot-sdk/issues/628 and https://github.com/paritytech/polkadot-sdk/issues/598. These are features that require all validators enable them at the same time, assuming all/most nodes have upgraded their node versions. This PR doesn't add any feature yet. These are coming in future PRs. Also adds a runtime API for querying the state of the client features and an extrinsic for setting/unsetting a feature by its index in the bitfield. Note: originally part of: https://github.com/paritytech/polkadot-sdk/pull/1644, but posted as standalone to be reused by other PRs until the initial PR is merged
-
PG Herveou authored
-
georgepisaltu authored
Fixes https://github.com/paritytech/polkadot-sdk/issues/106 Port of cumulus PR https://github.com/paritytech/cumulus/pull/2960 This PR adds the ability to bid for collator slots even after the max number of collators have already registered. This eliminates the first come, first served mechanism that was in place before. Key changes: - added `update_bond` extrinsic to allow registered candidates to adjust their bonds in order to dynamically control their bids - added `take_candidate_slot` extrinsic to try to replace an already existing candidate by bidding more than them - candidates are now kept in a sorted list in the pallet storage, where the top `DesiredCandidates` out of `MaxCandidates` candidates in the list will be selected by the session pallet as collators - if the candidacy bond is increased through a `set_candidacy_bond` call, candidates which don't meet the new bond requirements are kicked # Checklist - [ ] My PR includes a detailed description as outlined in the "Description" section above - [ ] My PR follows the [labeling requirements](https://github.com/paritytech/polkadot-sdk/blob/master/docs/CONTRIBUTING.md#process ) of this project (at minimum one label for `T` required) - [ ] I have made corresponding changes to the documentation (if applicable) - [ ] I have added tests that prove my fix is effective or that my feature works (if applicable) - [ ] If this PR alters any external APIs or interfaces used by Polkadot, the corresponding Polkadot PR is ready as well as the corresponding Cumulus PR (optional) --------- Signed-off-by:
georgepisaltu <[email protected]>
-
Adrian Catangiu authored
- switch from Rococo<>Wococo to Rococo<>Westend bridge - add bidirectional simple tests - remove Wococo chains from xcm-emulator - added tests for assets transfers over Rococo<>Westend bridge fixes https://github.com/paritytech/parity-bridges-common/issues/2405
-
Liam Aharon authored
Closes https://github.com/paritytech/polkadot-sdk/issues/2241 See issue comments for more details about this storage.
-
- Nov 13, 2023
-
-
Adrian Catangiu authored
## Motivation `pallet-xcm` is the main user-facing interface for XCM functionality, including assets manipulation functions like `teleportAssets()` and `reserve_transfer_assets()` calls. While `teleportAsset()` works both ways, `reserve_transfer_assets()` works only for sending reserve-based assets to a remote destination and beneficiary when the reserve is the _local chain_. ## Solution This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to support transfers when reserves are other chains. This will allow complete, **bi-directional** reserve-based asset transfers user stories using `pallet-xcm`. Enables following scenarios: - transferring assets with local reserve (was previously supported iff asset used as fee also had local reserve - now it works in all cases), - transferring assets with reserve on destination, - transferring assets with reserve on remote/third-party chain (iff assets and fees have same remote reserve), - transferring assets with reserve different than the reserve of the asset to be used as fees - meaning can be used to transfer random asset with local/dest reserve while using DOT for fees on all involved chains, even if DOT local/dest reserve doesn't match asset reserve, - transferring assets with any type of local/dest reserve while using fees which can be teleported between involved chains. All of the above is done by pallet inner logic without the user having to specify which scenario/reserves/teleports/etc. The correct scenario and corresponding XCM programs are identified, and respectively, built automatically based on runtime configuration of trusted teleporters and trusted reserves. #### Current limitations: - while `fees` and "non-fee" `assets` CAN have different reserves (or fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among themselves, have different reserve locations (this is also implicitly enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely increased in the future). - `fees` and "non-fee" `assets` CANNOT have **different remote** reserves (this could also be supported in the future, but adds even more complexity while possibly not being worth it - we'll see what the future holds). Fixes https://github.com/paritytech/polkadot-sdk/issues/1584 Fixes https://github.com/paritytech/polkadot-sdk/issues/2055 --------- Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]>
-
- Nov 10, 2023
-
-
PG Herveou authored
We are introducing a new set of `XcmController` traits (final name yet to be determined). These traits are implemented by `pallet-xcm` and allows other pallets, such as `pallet_contracts`, to rely on these traits instead of tight coupling them to `pallet-xcm`. Using only the existing Xcm traits would mean duplicating the logic from `pallet-xcm` in these other pallets, which we aim to avoid. Our objective is to ensure that when these APIs are called from `pallet-contracts`, they produce the exact same outcomes as if called directly from `pallet-xcm`. The other benefits is that we can also expose return values to `pallet-contracts` instead of just calling `pallet-xcm` dispatchable and getting a `DispatchResult` back. See traits integration in this PR https://github.com/paritytech/polkadot-sdk/pull/1248 , where the traits are used as follow to define and implement `pallet-contracts` Config. ```rs // Contracts config: pub trait Config: frame_system::Config { // ... /// A type that exposes XCM APIs, allowing contracts to interact with other parachains, and /// execute XCM programs. type Xcm: xcm_executor::traits::Controller< OriginFor<Self>, <Self as frame_system::Config>::RuntimeCall, BlockNumberFor<Self>, >; } // implementation impl pallet_contracts::Config for Runtime { // ... type Xcm = pallet_xcm::Pallet<Self>; } ``` --------- Co-authored-by:
Alexander Theißen <[email protected]> Co-authored-by: command-bot <>
-
- Nov 09, 2023
-
-
Oliver Tale-Yazdi authored
Missing descriptions (47): - [x] `cumulus/client/collator/Cargo.toml` - [x] `cumulus/client/relay-chain-inprocess-interface/Cargo.toml` - [x] `cumulus/client/cli/Cargo.toml` - [x] `cumulus/client/service/Cargo.toml` - [x] `cumulus/client/relay-chain-rpc-interface/Cargo.toml` - [x] `cumulus/client/relay-chain-interface/Cargo.toml` - [x] `cumulus/client/relay-chain-minimal-node/Cargo.toml` - [x] `cumulus/parachains/pallets/parachain-info/Cargo.toml` - [x] `cumulus/parachains/pallets/ping/Cargo.toml` - [x] `cumulus/primitives/utility/Cargo.toml` - [x] `cumulus/primitives/aura/Cargo.toml` - [x] `cumulus/primitives/core/Cargo.toml` - [x] `cumulus/primitives/parachain-inherent/Cargo.toml` - [x] `cumulus/test/relay-sproof-builder/Cargo.toml` - [x] `cumulus/pallets/xcmp-queue/Cargo.toml` - [x] `cumulus/pallets/dmp-queue/Cargo.toml` - [x] `cumulus/pallets/xcm/Cargo.toml` - [x] `polkadot/erasure-coding/Cargo.toml` - [x] `polkadot/statement-table/Cargo.toml` - [x] `polkadot/primitives/Cargo.toml` - [x] `polkadot/rpc/Cargo.toml` - [x] `polkadot/node/service/Cargo.toml` - [x] `polkadot/node/core/parachains-inherent/Cargo.toml` - [x] `polkadot/node/core/approval-voting/Cargo.toml` - [x] `polkadot/node/core/dispute-coordinator/Cargo.toml` - [x] `polkadot/node/core/av-store/Cargo.toml` - [x] `polkadot/node/core/chain-api/Cargo.toml` - [x] `polkadot/node/core/prospective-parachains/Cargo.toml` - [x] `polkadot/node/core/backing/Cargo.toml` - [x] `polkadot/node/core/provisioner/Cargo.toml` - [x] `polkadot/node/core/runtime-api/Cargo.toml` - [x] `polkadot/node/core/bitfield-signing/Cargo.toml` - [x] `polkadot/node/network/dispute-distribution/Cargo.toml` - [x] `polkadot/node/network/bridge/Cargo.toml` - [x] `polkadot/node/network/collator-protocol/Cargo.toml` - [x] `polkadot/node/network/approval-distribution/Cargo.toml` - [x] `polkadot/node/network/availability-distribution/Cargo.toml` - [x] `polkadot/node/network/bitfield-distribution/Cargo.toml` - [x] `polkadot/node/network/gossip-support/Cargo.toml` - [x] `polkadot/node/network/availability-recovery/Cargo.toml` - [x] `polkadot/node/collation-generation/Cargo.toml` - [x] `polkadot/node/overseer/Cargo.toml` - [x] `polkadot/runtime/parachains/Cargo.toml` - [x] `polkadot/runtime/common/slot_range_helper/Cargo.toml` - [x] `polkadot/runtime/metrics/Cargo.toml` - [x] `polkadot/xcm/pallet-xcm-benchmarks/Cargo.toml` - [x] `polkadot/utils/generate-bags/Cargo.toml` - [x] `substrate/bin/minimal/runtime/Cargo.toml` --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Signed-off-by:
alindima <[email protected]> Co-authored-by:
ordian <[email protected]> Co-authored-by:
Tsvetomir Dimitrov <[email protected]> Co-authored-by:
Marcin S <[email protected]> Co-authored-by:
alindima <[email protected]> Co-authored-by:
Sebastian Kunert <[email protected]> Co-authored-by:
Dmitry Markin <[email protected]> Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Liam Aharon <[email protected]>
-
- Nov 08, 2023
-
-
RadiumBlock authored
# Description We would like to add our bootnodes to the following parachains: Westend: Westmint, Bridgehub Kusama: Statemine, Bridgehub Polkadot: Statemint, Bridgehub, Collectives Thank you. --------- Co-authored-by:
Oliver Tale-Yazdi <[email protected]>
-
Vincent Geddes authored
This PR changes the registration order of the `MessageQueue` pallet so that it is registered last. This is necessary so that the [on_initialize](https://github.com/Snowfork/snowbridge/blob/df8d5da82e517a65fb0858a4f2ead533290336b5/parachain/pallets/outbound-queue/src/lib.rs#L267) hooks for Snowbridge can run before `MessageQueue` delivers messages using its own `on_initialize`. Generally, I think this is preferable regardless of Snowbridge's particular requirements. Other pallets may want to do housekeeping before MessageQueue starts delivering messages. I'm hoping this PR, if accepted, can be included in the same release as https://github.com/paritytech/polkadot-sdk/pull/1246. As otherwise, changing the order of pallet registration is an ABI-breaking change.
-
Michal Kucharczyk authored
Some legacy tests were mistakenly merged in #1256 for `emulated-integration-tests-common` crate. This PR fixes the function name `build_genesis_storage` (no need to use `legacy` suffix, even though the genesis is built from `RuntimeGenesisConfig`).
-
Ignacio Palacios authored
Closes: - #1383 - Declared chains can be now be imported and reused in a different crate. - Chain declaration are now generic over a generic type `N` (the Network) - #1389 - Solved #1383, chains and networks declarations can be restructure to avoid having to compile all chains when running integrations tests where are not needed. - Chains are now declared on its own crate (removed from `integration-tests-common`) - Networks are now declared on its own crate (removed from `integration-tests-common`) - Integration tests will import only the relevant Network crate - `integration-tests-common` is renamed to `emulated-integration-tests-common` All this is necessary to be able to implement what is described here: https://github.com/paritytech/roadmap/issues/56#issuecomment-1777010553 --------- Co-authored-by: command-bot <>
-
Adrian Catangiu authored
`bridge-hub-westend-runtime` was added to cumulus/parachains, but wasn't hooked up to xcm-emulator to run tests against it. This commit addresses that ^. Signed-off-by:
Adrian Catangiu <[email protected]>
-