Bumps [unsafe-libyaml](https://github.com/dtolnay/unsafe-libyaml) from
0.2.9 to 0.2.10.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/unsafe-libyaml/releases">unsafe-libyaml's
releases</a>.</em></p>
<blockquote>
<h2>0.2.10</h2>
<ul>
<li>Fix write to improperly aligned pointer in 32-bit targets (<a
href="https://redirect.github.com/dtolnay/unsafe-libyaml/issues/21">#21</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/unsafe-libyaml/commit/61f3ab82b271ac90d6a04f65520614ca08c58abe"><code>61f3ab8</code></a>
Release 0.2.10</li>
<li><a
href="https://github.com/dtolnay/unsafe-libyaml/commit/d90d7abc4e31d590881a055c6ade175e40cd498f"><code>d90d7ab</code></a>
Clean up some redundant casts</li>
<li><a
href="https://github.com/dtolnay/unsafe-libyaml/commit/7755559145c9cf5573639bfecc557893d4a46b0d"><code>7755559</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/unsafe-libyaml/issues/24">#24</a>
from dtolnay/mallocalign</li>
<li><a
href="https://github.com/dtolnay/unsafe-libyaml/commit/b8a0863c1bb2a0e1b3d226679e4a7bd31d14c2b4"><code>b8a0863</code></a>
Fix insufficient alignment of malloc's return value on 32-bit</li>
<li><a
href="https://github.com/dtolnay/unsafe-libyaml/commit/389373f0d99dd8726eb52199e622056aa1d4ac8f"><code>389373f</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/unsafe-libyaml/issues/23">#23</a>
from dtolnay/malloc</li>
<li><a
href="https://github.com/dtolnay/unsafe-libyaml/commit/fd41ef659dcd9eaa973771985edce227cdcfe084"><code>fd41ef6</code></a>
Check arithmetic in malloc computations</li>
<li><a
href="https://github.com/dtolnay/unsafe-libyaml/commit/9e054fbfee5523f904bd70091170ad7a0e5402a2"><code>9e054fb</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/unsafe-libyaml/issues/22">#22</a>
from dtolnay/force</li>
<li><a
href="https://github.com/dtolnay/unsafe-libyaml/commit/5b40a9e0edc5c5e87585d49f9fd34603c2c4742b"><code>5b40a9e</code></a>
Check more arithmetic operations</li>
<li><a
href="https://github.com/dtolnay/unsafe-libyaml/commit/97a4332d8d5a47478e659cb9b872ed6613eee8a9"><code>97a4332</code></a>
Delete cast to long followed by size_t</li>
<li><a
href="https://github.com/dtolnay/unsafe-libyaml/commit/e5f4bbd0f0ff8c48c8df8e88f810e5d0c4143159"><code>e5f4bbd</code></a>
Clean up duplicated casting to size_t</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/unsafe-libyaml/compare/0.2.9...0.2.10">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=unsafe-libyaml&package-manager=cargo&previous-version=0.2.9&new-version=0.2.10)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/paritytech/polkadot-sdk/network/alerts).

</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Also fixes: https://github.com/paritytech/polkadot-sdk/issues/1417

- [x] CoreIndex -> AssignmentProvider mapping will be able to change any
time.
- [x] Implement
- [x] Provide Migrations
- [x] Add and fix tests
- [x] Implement bulk assigner logic
- [x] bulk assigner tests
- [x] Port over current assigner to use bulk designer (+ share on-demand
with bulk): top-level assigner has core ranges: legacy, bulk
- [x] Adjust migrations to reflect new assigner structure
- [x] Move migration code to Assignment code directly and make it
recursive (make it possible to skip releases) -> follow up ticket.
- [x] Test migrations
- [x] Add migration PR to runtimes repo -> follow up ticket.
- [x] Wire up with actual UMP messages
- [x] Write PR docs

---------

Co-authored-by: eskimor <[email protected]>
Co-authored-by: Bradley Olson <[email protected]>
Co-authored-by: BradleyOlson64 <[email protected]>
Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>
Co-authored-by: antonva <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>

# Description

Adds Snowbridge to the Rococo bridge hub runtime. Includes config
changes required in Rococo asset hub.

---------

Co-authored-by: Alistair Singh <[email protected]>
Co-authored-by: ron <[email protected]>
Co-authored-by: Vincent Geddes <[email protected]>
Co-authored-by: claravanstaden <Cats 4 life!>

this breaks cargo vendor which is necessary for building polkadot with
nix

Bumps [chrono](https://github.com/chronotope/chrono) from 0.4.27 to
0.4.31.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/chronotope/chrono/releases">chrono's
releases</a>.</em></p>
<blockquote>
<h2>0.4.31</h2>
<p>Another maintenance release.
It was not a planned effort to improve our support for UNIX timestamps,
yet most PRs seem related to this.</p>
<h3>Deprecations</h3>
<ul>
<li>Deprecate <code>timestamp_nanos</code> in favor of the non-panicking
<code>timestamp_nanos_opt</code> (<a
href="https://redirect.github.com/chronotope/chrono/issues/1275">#1275</a>)</li>
</ul>
<h3>Additions</h3>
<ul>
<li>Add <code>DateTime::&lt;Utc&gt;::from_timestamp</code> (<a
href="https://redirect.github.com/chronotope/chrono/issues/1279">#1279</a>,
thanks <a
href="https://github.com/demurgos"><code>@​demurgos</code></a>)</li>
<li>Add <code>TimeZone::timestamp_micros</code> (<a
href="https://redirect.github.com/chronotope/chrono/issues/1285">#1285</a>,
thanks <a
href="https://github.com/emikitas"><code>@​emikitas</code></a>)</li>
<li>Add <code>DateTime&lt;Tz&gt;::timestamp_nanos_opt</code> and
<code>NaiveDateTime::timestamp_nanos_opt</code> (<a
href="https://redirect.github.com/chronotope/chrono/issues/1275">#1275</a>)</li>
<li>Add <code>UNIX_EPOCH</code> constants (<a
href="https://redirect.github.com/chronotope/chrono/issues/1291">#1291</a>)</li>
</ul>
<h3>Fixes</h3>
<ul>
<li>Format day of month in RFC 2822 without padding (<a
href="https://redirect.github.com/chronotope/chrono/issues/1272">#1272</a>)</li>
<li>Don't allow strange leap seconds which are not on a minute boundary
initialization methods (<a
href="https://redirect.github.com/chronotope/chrono/issues/1283">#1283</a>)
This makes many methods a little more strict:
<ul>
<li><code>NaiveTime::from_hms_milli</code></li>
<li><code>NaiveTime::from_hms_milli_opt</code></li>
<li><code>NaiveTime::from_hms_micro</code></li>
<li><code>NaiveTime::from_hms_micro_opt</code></li>
<li><code>NaiveTime::from_hms_nano</code></li>
<li><code>NaiveTime::from_hms_nano_opt</code></li>
<li><code>NaiveTime::from_num_seconds_from_midnight</code></li>
<li><code>NaiveTime::from_num_seconds_from_midnight_opt</code></li>
<li><code>NaiveDate::and_hms_milli</code></li>
<li><code>NaiveDate::and_hms_milli_opt</code></li>
<li><code>NaiveDate::and_hms_micro</code></li>
<li><code>NaiveDate::and_hms_micro_opt</code></li>
<li><code>NaiveDate::and_hms_nano</code></li>
<li><code>NaiveDate::and_hms_nano_opt</code></li>
<li><code>NaiveDateTime::from_timestamp</code></li>
<li><code>NaiveDateTime::from_timestamp_opt</code></li>
<li><code>TimeZone::timestamp</code></li>
<li><code>TimeZone::timestamp_opt</code></li>
</ul>
</li>
<li>Fix underflow in <code>NaiveDateTime::timestamp_nanos_opt</code> (<a
href="https://redirect.github.com/chronotope/chrono/issues/1294">#1294</a>,
thanks <a
href="https://github.com/crepererum"><code>@​crepererum</code></a>)</li>
</ul>
<h3>Documentation</h3>
<ul>
<li>Add more documentation about the RFC 2822 obsolete date format (<a
href="https://redirect.github.com/chronotope/chrono/issues/1267">#1267</a>)</li>
</ul>
<h3>Internal</h3>
<ul>
<li>Remove internal <code>__doctest</code> feature and
<code>doc_comment</code> dependency (<a
href="https://redirect.github.com/chronotope/chrono/issues/1276">#1276</a>)</li>
<li>CI: Bump <code>actions/checkout</code> from 3 to 4 (<a
href="https://redirect.github.com/chronotope/chrono/issues/1280">#1280</a>)</li>
<li>Optimize <code>NaiveDate::add_days</code> for small values (<a
href="https://redirect.github.com/chronotope/chrono/issues/1214">#1214</a>)</li>
<li>Upgrade <code>pure-rust-locales</code> to 0.7.0 (<a
href="https://redirect.github.com/chronotope/chrono/issues/1288">#1288</a>,
thanks <a href="https://github.com/jeremija"><code>@​jeremija</code></a>
wo did good improvements on <code>pure-rust-locales</code>)</li>
</ul>
<p>Thanks to all contributors on behalf of the chrono team, <a
href="https://github.com/djc"><code>@​djc</code></a> and <a
href="https://github.com/pitdicker"><code>@​pitdicker</code></a>!</p>
<h2>0.4.30</h2>
<p>In this release, we have decided to swap out the
<code>chrono::Duration</code> type (which has been a re-export of time
0.1 <code>Duration</code> type) with our own definition, which exposes a
strict superset of the <code>time::Duration</code> API. This helps avoid
warnings about the [CVE-2020-26235] and [RUSTSEC-2020-0071] advisories
for downstream users and allows us to improve the <code>Duration</code>
API going forward.</p>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/chronotope/chrono/commit/e730c6ac45649a6a636abf30b796304bc46ecd15"><code>e730c6a</code></a>
Bump version to 0.4.31</li>
<li><a
href="https://github.com/chronotope/chrono/commit/2afdde8f7f23f087b5027662e2882dba0663fef7"><code>2afdde8</code></a>
fix: underflow during datetime-&gt;nanos conversion</li>
<li><a
href="https://github.com/chronotope/chrono/commit/46ad2c2b2c901eb20e43a7fca025aac02605bda4"><code>46ad2c2</code></a>
Add <code>UNIX_EPOCH</code> constants</li>
<li><a
href="https://github.com/chronotope/chrono/commit/1df8db3a547bf50929d3d1774306f996b63e9e7c"><code>1df8db3</code></a>
Add TimeZone::timestamp_micros</li>
<li><a
href="https://github.com/chronotope/chrono/commit/861d4e12487181e71744478a320db20f56bd61af"><code>861d4e1</code></a>
Make TimeZone::timestamp_millis_opt use</li>
<li><a
href="https://github.com/chronotope/chrono/commit/3c4846a88235a38105a047b0acd34ce239a1cfb5"><code>3c4846a</code></a>
Upgrade pure-rust-locales to 0.7.0</li>
<li><a
href="https://github.com/chronotope/chrono/commit/6665804676e55e9e2375eed7c10cc9e0910abf11"><code>6665804</code></a>
Deny leap second if secs != 59 in
<code>from_num_seconds_from_midnight_opt</code></li>
<li><a
href="https://github.com/chronotope/chrono/commit/61b7ffbb7a95df577c308eb0f2ab5c68e1566cf1"><code>61b7ffb</code></a>
Deny leap second if secs != 59 in <code>from_hms_nano_opt</code></li>
<li><a
href="https://github.com/chronotope/chrono/commit/202af6cfda9bfdb195dc96377fcdeee7ed024b65"><code>202af6c</code></a>
Don't generate leap seconds that are not 60 in NaiveTime's Arbitrary
impl</li>
<li><a
href="https://github.com/chronotope/chrono/commit/60283ab55cbc9ea6caa86e19bf5da2c086cdf4bc"><code>60283ab</code></a>
Don't create strange leap seconds in tests</li>
<li>Additional commits viewable in <a
href="https://github.com/chronotope/chrono/compare/v0.4.27...v0.4.31">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=chrono&package-manager=cargo&previous-version=0.4.27&new-version=0.4.31)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

New runtimes for the Coretime Chain (a.k.a. "Broker Chain") described in
RFC-1.

Replaces https://github.com/paritytech/cumulus/pull/2889


- [x] Add Agile Coretime pallet
https://github.com/paritytech/substrate/pull/14568
- [x] Generate chain specs for local and testnets
- [x] Deploy parachain on Rococo - Done:
[rococo-coretime-rpc.polkadot.io](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Frococo-coretime-rpc.polkadot.io#/explorer)

DevOps issue for Aura keygen:
https://github.com/paritytech/devops/issues/2725

Edit (Dónal): This PR is mainly for Rococo, the Westend runtime is a
shell with no `Broker` pallet. The Rococo runtime has the broker calls
filtered for initial deployment.

---------

Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: 0xmovses <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Branislav Kontur <[email protected]>

Bumps [dyn-clone](https://github.com/dtolnay/dyn-clone) from 1.0.13 to
1.0.16.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/dyn-clone/releases">dyn-clone's
releases</a>.</em></p>
<blockquote>
<h2>1.0.16</h2>
<ul>
<li>Documentation improvements</li>
</ul>
<h2>1.0.15</h2>
<ul>
<li>Documentation improvements</li>
</ul>
<h2>1.0.14</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/dyn-clone/commit/f2f0a02f1f7190048153e5ea8f554db7377a50a9"><code>f2f0a02</code></a>
Release 1.0.16</li>
<li><a
href="https://github.com/dtolnay/dyn-clone/commit/7e5037b8242739a52e36bff94d405caede2cace8"><code>7e5037b</code></a>
Fix crate name in html_root_url</li>
<li><a
href="https://github.com/dtolnay/dyn-clone/commit/e84a6e10e7185e4d050ccf466098486983b60539"><code>e84a6e1</code></a>
Release 1.0.15</li>
<li><a
href="https://github.com/dtolnay/dyn-clone/commit/453e078f525aaf1afbfa17a101d166ca0061bcbe"><code>453e078</code></a>
Fix documentation on no-std targets</li>
<li><a
href="https://github.com/dtolnay/dyn-clone/commit/4bcfc07bec99e002de32285bc09bc73c6a679b66"><code>4bcfc07</code></a>
Let rustdoc see std crate</li>
<li><a
href="https://github.com/dtolnay/dyn-clone/commit/8bd3355c1e7607e8aa9424b39acfc080e671b32d"><code>8bd3355</code></a>
Allow rustdoc to take care of intra-doc links</li>
<li><a
href="https://github.com/dtolnay/dyn-clone/commit/638fa8b1b9ca3ffd10a84cee3ca0310f10b85c5b"><code>638fa8b</code></a>
Remove 'remember to update' reminder from Cargo.toml</li>
<li><a
href="https://github.com/dtolnay/dyn-clone/commit/2e6b761113dba45bcf765e6753a8a55279220750"><code>2e6b761</code></a>
Test docs.rs documentation build in CI</li>
<li><a
href="https://github.com/dtolnay/dyn-clone/commit/cee99471c46f9f512640aa03c680a547ac72c22c"><code>cee9947</code></a>
Release 1.0.14</li>
<li><a
href="https://github.com/dtolnay/dyn-clone/commit/7b6a70759714b5cb55ac4b763636527acb6ab2c3"><code>7b6a707</code></a>
Delete dyn-clonable link</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/dyn-clone/compare/1.0.13...1.0.16">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=dyn-clone&package-manager=cargo&previous-version=1.0.13&new-version=1.0.16)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Ready-to-merge version of
https://github.com/paritytech/polkadot-sdk/pull/2601

- Added optional CPU profiling
- Updated instructions how to set up Prometheus, Pyroscope and Graphana
- Added a flamegraph dashboard
<img width="1470" alt="image"
src="https://github.com/paritytech/polkadot-sdk/assets/27277055/c8f3b33d-3c01-4ec0-ac34-72d52325b6e6">

---------

Co-authored-by: ordian <[email protected]>

Bumps [async-trait](https://github.com/dtolnay/async-trait) from 0.1.73
to 0.1.74.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/async-trait/releases">async-trait's
releases</a>.</em></p>
<blockquote>
<h2>0.1.74</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/async-trait/commit/265979b07a9af573e1edd3b2a9b179533cfa7a6c"><code>265979b</code></a>
Release 0.1.74</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/5e677097d2e67f7a5c5e3023e2f3b99b36a9e132"><code>5e67709</code></a>
Fix doc test when async fn in trait is natively supported</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/ef144aed28b636eb65759505b2323afc4c753fbe"><code>ef144ae</code></a>
Update ui test suite to nightly-2023-10-15</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/9398a28d6fc977ccf8c286bd85b4b87a883f92ac"><code>9398a28</code></a>
Test docs.rs documentation build in CI</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/8737173dafa371e5e9e491d736513be1baf697f4"><code>8737173</code></a>
Update ui test suite to nightly-2023-09-24</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/5ba643c001a55f70c4a44690e040cdfab873ba56"><code>5ba643c</code></a>
Test dyn Trait containing async fn</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/247c8e7b0b3ff69c9518ebf93e69fe74d47f17b6"><code>247c8e7</code></a>
Add ui test testing the recommendation to use async-trait</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/799db66a84834c403860df4a8c0227d8fb7f9d9d"><code>799db66</code></a>
Update ui test suite to nightly-2023-09-23</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/0e60248011f751d8ccf58219d0a79aacfe9619f1"><code>0e60248</code></a>
Update actions/checkout@v3 -&gt; v4</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/7fcbc83993d5ef483d048c271a7f6c4ac8c98388"><code>7fcbc83</code></a>
Update ui test suite to nightly-2023-08-29</li>
<li>See full diff in <a
href="https://github.com/dtolnay/async-trait/compare/0.1.73...0.1.74">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=async-trait&package-manager=cargo&previous-version=0.1.73&new-version=0.1.74)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

`atty` is unmaintaned. See the advisory
https://github.com/advisories/GHSA-g98v-hv3f-hcfr

I picked is-terminal because rustix is already in-tree, so doesn't
increase the dependency footprint, and I am not sure if we can rely on
`IsTerminal` from the std because I am not sure what our MSRV.

Bumps the known_good_semver group with 1 update:
[syn](https://github.com/dtolnay/syn).

Updates `syn` from 2.0.40 to 2.0.41
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.41</h2>
<ul>
<li>Support parsing syn::Field in <code>parse_quote!</code> (<a
href="https://redirect.github.com/dtolnay/syn/issues/1548">#1548</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/63b17012ab20ff72f3e49aaf821719a866b1a352"><code>63b1701</code></a>
Release 2.0.41</li>
<li><a
href="https://github.com/dtolnay/syn/commit/920ab7d6a061921d03541d86d7ac8daaf864bb7b"><code>920ab7d</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1548">#1548</a>
from dtolnay/parsequotefield</li>
<li><a
href="https://github.com/dtolnay/syn/commit/5e1592408c3bcda68db10cd054f9d87e9e480f9b"><code>5e15924</code></a>
Test parse_quote implementation for Field</li>
<li><a
href="https://github.com/dtolnay/syn/commit/c268c6793f8a71ac2f3e8ee80201701e4352b407"><code>c268c67</code></a>
Support parsing Field in parse_quote</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2ab0f6ae4b47d133c828d9123e86a50565a95447"><code>2ab0f6a</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1547">#1547</a>
from dtolnay/testparsequote</li>
<li><a
href="https://github.com/dtolnay/syn/commit/46172a41a478920ff23c9e370a5b922fa984829d"><code>46172a4</code></a>
Add parse_quote tests</li>
<li><a
href="https://github.com/dtolnay/syn/commit/0fcdad044f330f4c32e2f3b1230271669d1951ea"><code>0fcdad0</code></a>
Support punctuated Pairs iterator in snapshot tests</li>
<li><a
href="https://github.com/dtolnay/syn/commit/06161ba80283edf6f741dfc86c91f6985297d168"><code>06161ba</code></a>
Update test suite to nightly-2023-12-12</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.40...2.0.41">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=syn&package-manager=cargo&previous-version=2.0.40&new-version=2.0.41)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

This PR adds [Rococo
People](https://github.com/paritytech/polkadot-sdk/pull/2281) <> [Rococo
Bulletin](https://github.com/zdave-parity/polkadot-bulletin-chain) to
the Rococo Bridge Hub code. There's a couple of things left to do here:
- [x] add remaining tests - it'd need some refactoring in the
`bridge-hub-test-utils` - will do in a separate PR;
- [x] actually run benchmarks for new messaging pallet (do we have bot
nowadays?).

The reason why I'm opening it before this ^^^ is ready, is that I'd like
to hear others opinion on how to deal with hacks with that bridge.
Initially I was assuming that Rococo Bulletin will be the 1:1 copy of
the Polkadot Bulletin (to avoid maintaining multiple
runtimes/releases/...), so you can see many `PolkadotBulletin` mentions
in this PR, even though we are going to bridge with the parallel chain
(`RococoBulletin`). That's because e.g. pallet names from
`construct_runtime` are affecting runtime storage keys and bridges are
using runtime storage proofs => it is important to use names that the
Bulletin chain expects.

But in the end, this hack won't work - we can't use Polkadot Bulletin
runtime to bridge with Rococo Bridge Hub, because Polkadot Bulletin
expects Polkadot Bridge hub to use `1002` parachain id and Rococo Bridge
Hub seats on the `1013`. This also affects storage keys using in
bridging, so I had to add the [`rococo`
feature](https://github.com/svyatonik/polkadot-bulletin-chain/blob/add-bridge-pallets/runtime/Cargo.toml#L198)
to the Bulletin chain. So now we can actually alter its runtime and
adapt it for Rococo.

So the question here is - what's better for us here
- to leave everything as is (seems hacky and non-trivial);
- change Bulletin chain runtime when `rococo` feature is used - e.g. use
proper names there (`WithPolkadotGrandpa` -> `WithRococoGrandpa`, ...)
- add another set of pallets to the Bulletin chain runtime to bridge
with Rococo and never use them in production. Similar to hack that we
had in Rococo/Wococo

cc @acatangiu @bkontur @serban300 

also cc @joepetrowski

 as the main "client" of this bridge

---

A couple words on how this bridge is different from the Rococo <>
Westend bridge:
- it is a bridge with a chain that uses GRANDPA finality, not the
parachain finality (hence the tests needs to be changed);
- it is a fee-free bridge. So
`AllowExplicitUnpaidExecutionFrom<Equals<SiblingPeople>>` + we are not
paying any rewards to relayers (apart from compensating transaction
costs).

---------

Signed-off-by: dependabot[bot] <[email protected]>
Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: command-bot <>

This tool makes it easy to run parachain consensus stress/performance
testing on your development machine or in CI.

## Motivation
The parachain consensus node implementation spans across many modules
which we call subsystems. Each subsystem is responsible for a small part
of logic of the parachain consensus pipeline, but in general the most
load and performance issues are localized in just a few core subsystems
like `availability-recovery`, `approval-voting` or
`dispute-coordinator`. In the absence of such a tool, we would run large
test nets to load/stress test these parts of the system. Setting up and
making sense of the amount of data produced by such a large test is very
expensive, hard to orchestrate and is a huge development time sink.

## PR contents
- CLI tool 
- Data Availability Read test
- reusable mockups and components needed so far
- Documentation on how to get started

### Data Availability Read test

An overseer is built with using a real `availability-recovery` susbsytem
instance while dependent subsystems like `av-store`, `network-bridge`
and `runtime-api` are mocked. The network bridge will emulate all the
network peers and their answering to requests.

The test is going to be run for a number of blocks. For each block it
will generate send a “RecoverAvailableData” request for an arbitrary
number of candidates. We wait for the subsystem to respond to all
requests before moving to the next block.
At the same time we collect the usual subsystem metrics and task CPU
metrics and show some nice progress reports while running.

### Here is how the CLI looks like:

```
[2023-11-28T13:06:27Z INFO  subsystem_bench::core::display] n_validators = 1000, n_cores = 20, pov_size = 5120 - 5120, error = 3, latency = Some(PeerLatency { min_latency: 1ms, max_latency: 100ms })
[2023-11-28T13:06:27Z INFO  subsystem-bench::availability] Generating template candidate index=0 pov_size=5242880
[2023-11-28T13:06:27Z INFO  subsystem-bench::availability] Created test environment.
[2023-11-28T13:06:27Z INFO  subsystem-bench::availability] Pre-generating 60 candidates.
[2023-11-28T13:06:30Z INFO  subsystem-bench::core] Initializing network emulation for 1000 peers.
[2023-11-28T13:06:30Z INFO  subsystem-bench::availability] Current block 1/3
[2023-11-28T13:06:30Z INFO  substrate_prometheus_endpoint] 〽

️ Prometheus exporter started at 127.0.0.1:9999
[2023-11-28T13:06:30Z INFO  subsystem_bench::availability] 20 recoveries pending
[2023-11-28T13:06:37Z INFO  subsystem_bench::availability] Block time 6262ms
[2023-11-28T13:06:37Z INFO  subsystem-bench::availability] Sleeping till end of block (0ms)
[2023-11-28T13:06:37Z INFO  subsystem-bench::availability] Current block 2/3
[2023-11-28T13:06:37Z INFO  subsystem_bench::availability] 20 recoveries pending
[2023-11-28T13:06:43Z INFO  subsystem_bench::availability] Block time 6369ms
[2023-11-28T13:06:43Z INFO  subsystem-bench::availability] Sleeping till end of block (0ms)
[2023-11-28T13:06:43Z INFO  subsystem-bench::availability] Current block 3/3
[2023-11-28T13:06:43Z INFO  subsystem_bench::availability] 20 recoveries pending
[2023-11-28T13:06:49Z INFO  subsystem_bench::availability] Block time 6194ms
[2023-11-28T13:06:49Z INFO  subsystem-bench::availability] Sleeping till end of block (0ms)
[2023-11-28T13:06:49Z INFO  subsystem_bench::availability] All blocks processed in 18829ms
[2023-11-28T13:06:49Z INFO  subsystem_bench::availability] Throughput: 102400 KiB/block
[2023-11-28T13:06:49Z INFO  subsystem_bench::availability] Block time: 6276 ms
[2023-11-28T13:06:49Z INFO  subsystem_bench::availability] 
    
    Total received from network: 415 MiB
    Total sent to network: 724 KiB
    Total subsystem CPU usage 24.00s
    CPU usage per block 8.00s
    Total test environment CPU usage 0.15s
    CPU usage per block 0.05s
```

### Prometheus/Grafana stack in action
<img width="1246" alt="Screenshot 2023-11-28 at 15 11 10"
src="https://github.com/paritytech/polkadot-sdk/assets/54316454/eaa47422-4a5e-4a3a-aaef-14ca644c1574">
<img width="1246" alt="Screenshot 2023-11-28 at 15 12 01"
src="https://github.com/paritytech/polkadot-sdk/assets/54316454/237329d6-1710-4c27-8f67-5fb11d7f66ea">
<img width="1246" alt="Screenshot 2023-11-28 at 15 12 38"
src="https://github.com/paritytech/polkadot-sdk/assets/54316454/a07119e8-c9f1-4810-a1b3-f1b7b01cf357">

---------

Signed-off-by: Andrei Sandu <[email protected]>

Bumps [toml](https://github.com/toml-rs/toml) from 0.7.6 to 0.8.2.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/toml-rs/toml/commit/fe65b2bfa2021b939a0fc71e8b008609ea21f6fe"><code>fe65b2b</code></a>
chore: Release</li>
<li><a
href="https://github.com/toml-rs/toml/commit/ed597ebad11afdadc27712e3f851e6c5cd48fb51"><code>ed597eb</code></a>
chore: Release</li>
<li><a
href="https://github.com/toml-rs/toml/commit/257a0fdc59656c01bcce151af61339563fac22c4"><code>257a0fd</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/toml-rs/toml/commit/4b44f53a3194729317250232872584464ebe12a7"><code>4b44f53</code></a>
Merge pull request <a
href="https://redirect.github.com/toml-rs/toml/issues/617">#617</a> from
epage/update</li>
<li><a
href="https://github.com/toml-rs/toml/commit/7eaf2861106430833eb40e7b237fe5522be6bb03"><code>7eaf286</code></a>
fix(parser): Failed on mixed inline tables</li>
<li><a
href="https://github.com/toml-rs/toml/commit/e1f20378a2a8c78f182b2ac61f76eebd30990b77"><code>e1f2037</code></a>
test: Verify with latest data</li>
<li><a
href="https://github.com/toml-rs/toml/commit/2f9253c9eb6c968be8227284b873660bd3451007"><code>2f9253c</code></a>
chore: Update toml-test</li>
<li><a
href="https://github.com/toml-rs/toml/commit/c9b481cab5038e9801e60f6bfb935f983218d8f6"><code>c9b481c</code></a>
test(toml): Ensure tables are used for validation</li>
<li><a
href="https://github.com/toml-rs/toml/commit/43d7f29cfdad91bb72658d94039b16e7457a54ed"><code>43d7f29</code></a>
Merge pull request <a
href="https://redirect.github.com/toml-rs/toml/issues/615">#615</a> from
toml-rs/renovate/actions-checkout-4.x</li>
<li><a
href="https://github.com/toml-rs/toml/commit/ef9b8372c86f84481e8439c9c4a1f5dc4c15c35e"><code>ef9b837</code></a>
chore(deps): update actions/checkout action to v4</li>
<li>Additional commits viewable in <a
href="https://github.com/toml-rs/toml/compare/toml-v0.7.6...toml-v0.8.2">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=toml&package-manager=cargo&previous-version=0.7.6&new-version=0.8.2)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

So far the `bridge-hub-test-utils` contained a tests set for testing
BridgeHub runtime that is bridging with the remote **parachain**. But we
have https://github.com/paritytech/polkadot-sdk/pull/2540 coming, which
would add Rococo <> Bulletin chain bridge (where Bulletin = standalone
chain that is using GRANDPA finality). Then it'll be expanded to
Polkadot BH as well.

So this PR adds the same set of tests to the `bridge-hub-test-utils`,
but for the case when remote chain is the chain with GRANDPA finality.
There's a lot of changes in this PR - I'll describe some:
- I've added `BasicParachainRuntime` trait to decrease number of lines
we need to add to `where` clause. Could revert, but imo it is useful;
- `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is
a submodule for generating test data for the test sets.
`from_parachain.rs` is used in tests for the case when remote chain is a
parachain, `from_grandpa_chain.rs` - for the bridges with remote GRANDPA
chains. `mod.rs` has some code, shared by both types of tests;
- `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is
a submodule with all test cases. The `mod.rs` has tests, suitable for
all cases. There's also `wth_parachain.rs` and `with_grandpa_chain.rs`
with the same meaning as above;
- I've merged the "core" code of two previous tests -
`relayed_incoming_message_works` and `complex_relay_extrinsic_works`
into one single `relayed_incoming_message_works` test. So now we are
always constructing extrinsics and are dispatching them using executive
module (meaning all signed extensions are also tested).

New test set is used here:
https://github.com/paritytech/polkadot-sdk/pull/2540. Once this PR is
merged, I'll merge that other PR with master to remove duplicate
changes.

I'm also planning to cleanup generic constraints + remove some
unnecessary assumptions about used chains in a follow-up PRs. But for
now I think this PR has enough changes, so don't want to complicate it
even more.

---

Breaking changes for the code that have used those tests before:
- the `construct_and_apply_extrinsic` callback now accepts the
`RuntimeCall` instead of the `pallet_utility::Call`;
- the `construct_and_apply_extrinsic` now may be called multiple times
for the single test, so make sure the `frame_system::CheckNonce` is
correctly constructed;
- all previous tests have been moved from
`bridge_hub_test_utils::test_cases` to
`bridge_hub_test_utils::test_cases::from_parachain` module;
- there are several changes in test arguments - please refer to
https://github.com/paritytech/polkadot-sdk/compare/sv-tests-for-bridge-with-remote-grandpa-chain?expand=1#diff-79a28d4d3e1749050341c2424f00c4c139825b1a20937767f83e58b95166735c
for details.

Rename `ExportGenesisStateCommand` to `ExportGenesisHeadCommand` and make it respect custom genesis block builders (#2331)

Closes #2326.

This PR both fixes a logic bug and replaces an incorrect name.

## Bug Fix: Respecting custom genesis builder

Prior to this PR the standard logic for creating a genesis block was
repeated inside of cumulus. This PR removes that duplicated logic, and
calls into the proper `BuildGenesisBlock` implementation.

One consequence is that if the genesis block has already been
initialized, it will not be re-created, but rather read from the
database like it is for other node invocations. So you need to watch out
for old unpurged data during the development process. Offchain tools may
need to be updated accordingly. I've already filed
https://github.com/paritytech/zombienet/issues/1519

## Rename: It doesn't export state. It exports head data.

The name export-genesis-state was always wrong, nad it's never too late
to right a wrong. I've changed the name of the struct to
`ExportGenesisHeadCommand`.

There is still the question of what to do with individual nodes' public
CLIs. I have updated the parachain template to a reasonable default that
preserves compatibility with tools that will expect
`export-genesis-state` to still work. And I've chosen not to modify the
public CLIs of any other nodes in the repo. I'll leave it up to their
individual owners/maintains to decide whether that is appropriate.

---------

Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

## Summary

This pull request proposes a solution for improved control of the
versioned XCM flow over the bridge (across different consensus chains)
and resolves the situation where the sending chain/consensus has already
migrated to a higher XCM version than the receiving chain/consensus.

## Problem/Motivation

The current flow over the bridge involves a transfer from AssetHubRococo
(AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to
AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR.

In this process:
1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM
version checks using the `WrapVersion` feature, influenced by
`pallet_xcm::SupportedVersion` (managed by
`pallet_xcm::force_xcm_version` or version discovery).

2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM
version. The `HaulBlobExporter` converts the inner XCM to
[`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467),
also using the latest XCM version.

However, challenges arise:
- Incompatibility when BHW uses a different version than BHR. For
instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**,
BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing
encoding issues for BHW.
  ```
	/// Just a simulation of possible error, which could happen on BHW
	/// (this code is based on actual master without XCMv4)
	let encoded = hex_literal::hex!("0400");
	println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..]));

Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant
doesn't exist" })
  ``` 
- Similar compatibility issues exist between AHR and AHW.

## Solution

This pull request introduces the following solutions:

1. **New trait `CheckVersion`** - added to the `xcm` module and exposing
`pallet_xcm::SupportedVersion`. This enhancement allows checking the
actual XCM version for desired destinations outside of the `pallet_xcm`
module.

2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check
known/configured destination versions, ensuring compatibility. For
example, in the scenario mentioned, BHR can store the version `3` for
BHW. If BHR is on XCMv4, it will attempt to downgrade the message to
version `3` instead of using the latest version `4`.

3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check
ensures compatibility with the real destination's XCM version,
preventing the unnecessary sending of messages to the local bridge hub
if versions are incompatible.

These additions aim to improve the control and compatibility of XCM
flows over the bridge and addressing issues related to version
mismatches.

## Possible alternative solution

_(More investigation is needed, and at the very least, it should extend
to XCMv4/5. If this proves to be a viable option, I can open an RFC for
XCM.)._

Add the `XcmVersion` attribute to the `ExportMessage` so that the
sending chain can determine, based on what is stored in
`pallet_xcm::SupportedVersion`, the version the destination is using.
This way, we may not need to handle the version in `HaulBlobExporter`.

```
ExportMessage {
	network: NetworkId,
	destination: InteriorMultiLocation,
	xcm: Xcm<()>
	destination_xcm_version: Version, // <- new attritbute
},
```

```
pub trait ExportXcm {
        fn validate(
		network: NetworkId,
		channel: u32,
		universal_source: &mut Option<InteriorMultiLocation>,
		destination: &mut Option<InteriorMultiLocation>,
		message: &mut Option<Xcm<()>>,
                destination_xcm_version: Version, , // <- new attritbute
	) -> SendResult<Self::Ticket>;
```

## Future Directions

This PR does not fix version discovery over bridge, further
investigation will be conducted here:
https://github.com/paritytech/polkadot-sdk/issues/2417.

## TODO

- [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` -
change to 3 or lastest?
- [x] fix `pallet-xcm-bridge-hub-router`
- [x] fix HaulBlobExporter with version determination
[here](https://github.com/paritytech/polkadot-sdk/blob/2183669d/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465)
- [x] add unit-tests to the runtimes
- [x] run benchmarks for `ExportMessage`
- [x] extend local run scripts about `force_xcm_version(dest, version)`
- [ ] when merged, prepare governance calls for Rococo/Westend
- [ ] add PRDoc

Part of: https://github.com/paritytech/parity-bridges-common/issues/2719

---------

Co-authored-by: command-bot <>

This PR introduces a script and some templates to use the prdoc involved
in a release and build:
- the changelog
- a simple draft of audience documentation

Since the prdoc presence was enforced in the middle of the version
1.5.0, not all PRs did come with a `prdoc` file.
This PR creates all the missing `prdoc` files with some minimum content
allowing to properly generate the changelog.
The generated content is **not** suitable for the audience
documentation.

The audience documentation will be possible with the next version, when
all PR come with a proper `prdoc`.

## Assumptions

- the prdoc files for release `vX.Y.Z` have been moved under
`prdoc/X.Y.Z`
- the changelog requires for now for the prdoc files to contain author +
topic. Thos fields are optional.

The build script can  be called as:
```
VERSION=X.Y.Z ./scripts/release/build-changelogs.sh
```

Related:
-  #1408

---------

Co-authored-by: EgorPopelyaev <[email protected]>

Bumps [names](https://github.com/fnichol/names) from 0.13.0 to 0.14.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/fnichol/names/releases">names's
releases</a>.</em></p>
<blockquote>
<h2>Release 0.14.0</h2>
<h2><a
href="https://github.com/fnichol/names/compare/v0.13.0...v0.14.0">0.14.0</a>
- 2022-06-28</h2>
<h3>Changed</h3>
<ul>
<li>upgrade to <code>regex</code> 1.5.6</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/fnichol/names/blob/main/CHANGELOG.md">names's
changelog</a>.</em></p>
<blockquote>
<h2>[0.14.0] - 2022-06-28</h2>
<h3>Changed</h3>
<ul>
<li>upgrade to <code>regex</code> 1.5.6</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/fnichol/names/commit/8f09d5bf9860582c485b5856cbb325642d3e82c2"><code>8f09d5b</code></a>
release: names 0.14.0</li>
<li><a
href="https://github.com/fnichol/names/commit/b589b911b489812aa4a279efa1b91e6fe7ff7dfa"><code>b589b91</code></a>
release: update CHANGELOG.md</li>
<li><a
href="https://github.com/fnichol/names/commit/e1bed3056d38a98a22f28f39db42211404a00953"><code>e1bed30</code></a>
merge: <a
href="https://redirect.github.com/fnichol/names/issues/20">#20</a></li>
<li><a
href="https://github.com/fnichol/names/commit/12eb753220007a2aafe741031af83562c1e617f6"><code>12eb753</code></a>
Bump regex from 1.5.4 to 1.5.6</li>
<li><a
href="https://github.com/fnichol/names/commit/ed520b76b8542fdca09d9d80658f4ea0b8914464"><code>ed520b7</code></a>
merge: <a
href="https://redirect.github.com/fnichol/names/issues/19">#19</a></li>
<li><a
href="https://github.com/fnichol/names/commit/852eaee067bcadfb2a59e78b432919a87983fe6d"><code>852eaee</code></a>
chore: start next iteration 0.13.1-dev</li>
<li>See full diff in <a
href="https://github.com/fnichol/names/compare/v0.13.0...v0.14.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=names&package-manager=cargo&previous-version=0.13.0&new-version=0.14.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps the known_good_semver group with 2 updates:
[clap](https://github.com/clap-rs/clap) and
[syn](https://github.com/dtolnay/syn).

Updates `clap` from 4.4.10 to 4.4.11
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.11</h2>
<h2>[4.4.11] - 2023-12-04</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::mut_group</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.11] - 2023-12-04</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::mut_group</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/d092896d61fd73a5467db85eac035a9ce2ddbc60"><code>d092896</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c76a713f8bd40a54a58e8c1d2300a6792f1b79d5"><code>c76a713</code></a>
chore: Update lockfile</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b99d17bb0b78b667659982252e8973174e93ae7d"><code>b99d17b</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b47f8da4d857dd653915ce772757d4b996a36477"><code>b47f8da</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5247">#5247</a>
from epage/group</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2e7c9d11a84b5008e2b42b4df323557a31bb0337"><code>2e7c9d1</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5194">#5194</a>
from c19/patch-1</li>
<li><a
href="https://github.com/clap-rs/clap/commit/37917be0b75d5cd667cd37db6ea5c6bac837c674"><code>37917be</code></a>
feat: Add Command::mut_group</li>
<li><a
href="https://github.com/clap-rs/clap/commit/cf7a0272cc1d55d139983d4408e8bedab51338ad"><code>cf7a027</code></a>
chore: Update from '_rust/main'</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8c836eaa9d9279df467991a3b8463d748b515a0a"><code>8c836ea</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/10">#10</a> from
epage/renovate/migrate-config</li>
<li><a
href="https://github.com/clap-rs/clap/commit/598c6244983fb392457f3fbec9badf25fab6d051"><code>598c624</code></a>
chore(config): migrate config .github/renovate.json5</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.10...v4.4.11">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.39 to 2.0.40
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.40</h2>
<ul>
<li>Fix some edge cases of handling None-delimited groups in expression
parser (<a
href="https://redirect.github.com/dtolnay/syn/issues/1539">#1539</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1541">#1541</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1542">#1542</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1543">#1543</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1544">#1544</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1545">#1545</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/cf7f40a96a7329fb4215a7a1d8d9e7c93439b169"><code>cf7f40a</code></a>
Release 2.0.40</li>
<li><a
href="https://github.com/dtolnay/syn/commit/1ce8ccf5cd92824d1058019c0ae95b0616f6ac01"><code>1ce8ccf</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1538">#1538</a>
from dtolnay/testinvisible</li>
<li><a
href="https://github.com/dtolnay/syn/commit/d06bff8883e794c0d9d5fe2998210dec113b6eff"><code>d06bff8</code></a>
Add test for parsing Delimiter::None in expressions</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9ec66d42bba0da0041ab6448604b72f673e185f1"><code>9ec66d4</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1545">#1545</a>
from dtolnay/groupedlet</li>
<li><a
href="https://github.com/dtolnay/syn/commit/384621acc640779ee4a8250317c26a42e8ceef90"><code>384621a</code></a>
Fix None-delimited let expression in stmt position</li>
<li><a
href="https://github.com/dtolnay/syn/commit/5325b6d1711c1c9c6787cb6239b472b5f8b5daaf"><code>5325b6d</code></a>
Add test of let expr surrounded in None-delimited group</li>
<li><a
href="https://github.com/dtolnay/syn/commit/0ddfc27cf79573db0b5533c583ff895e9c7f3f72"><code>0ddfc27</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1544">#1544</a>
from dtolnay/nonedelimloop</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9c99b3f62ecebb2ac22f8ed99039934b0a18d0e6"><code>9c99b3f</code></a>
Fix stmt boundary after None-delimited group containing loop</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2781584ea868cce6c9ae750bc442e3b4b2dfd887"><code>2781584</code></a>
Add test of None-delimited group containing loop in match arm</li>
<li><a
href="https://github.com/dtolnay/syn/commit/d33292808432c8530b53c951f2780d7128c4bd0b"><code>d332928</code></a>
Simplify token stream construction in Delimiter::None tests</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.39...2.0.40">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

The `lazy_static` package does not work well in `no-std`: it requires
`spin_no_std` feature, which also will propagate into `std` if enabled.
This is not what we want.

This PR removes public/private key hash-maps and replaces them with
simple static byte arrays.

`&T` versions of `AsRef/Deref/From` traits implementation were removed.

Little const helper for converting hex strings into array during compile
time was also added. (somewhat similar to _hex_literal_).

---------

Co-authored-by: command-bot <>
Co-authored-by: Koute <[email protected]>

Bumps [num-traits](https://github.com/rust-num/num-traits) from 0.2.16
to 0.2.17.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rust-num/num-traits/blob/master/RELEASES.md">num-traits's
changelog</a>.</em></p>
<blockquote>
<h1>Release 0.2.17 (2023-10-07)</h1>
<ul>
<li><a
href="https://redirect.github.com/rust-num/num-traits/pull/286">Fix a
doc warning about custom classes with newer rustdoc.</a></li>
</ul>
<p><strong>Contributors</strong>: <a
href="https://github.com/robamu"><code>@​robamu</code></a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/rust-num/num-traits/commit/0a27d8c95ad4cdf1b04793cc3b19520f2f19c4f4"><code>0a27d8c</code></a>
Merge <a
href="https://redirect.github.com/rust-num/num-traits/issues/289">#289</a></li>
<li><a
href="https://github.com/rust-num/num-traits/commit/34e309a918d2c412949cba9c8869a46470fcde4f"><code>34e309a</code></a>
Release 0.2.17</li>
<li><a
href="https://github.com/rust-num/num-traits/commit/ef36d69f7c98cce52177f77de5d092da0c93cdcc"><code>ef36d69</code></a>
Merge <a
href="https://redirect.github.com/rust-num/num-traits/issues/286">#286</a></li>
<li><a
href="https://github.com/rust-num/num-traits/commit/d9d94f8a510d64cb56f70036777ad739e5e5e961"><code>d9d94f8</code></a>
Bugfix for text codeblock in documentation.</li>
<li>See full diff in <a
href="https://github.com/rust-num/num-traits/compare/num-traits-0.2.16...num-traits-0.2.17">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=num-traits&package-manager=cargo&previous-version=0.2.16&new-version=0.2.17)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Treasury Pallet Instance for the Fellowship in Westend Collectives.

In this update, we present a Treasury Pallet Instance that is under the
control of the Fellowship body, with oversight from the Root and
Treasurer origins. Here's how it is governed:
- the Root origin have the authority to reject or approve spend
proposals, with no amount limit for approvals.
- the Treasurer origin have the authority to reject or approve spend
proposals, with approval limits of up to 10,000,000 DOT.
- Voice of all Fellows ranked at 3 or above can reject or approve spend
proposals, with a maximum approval limit of 10,000 DOT.
- Voice of Fellows ranked at 4 or above can also reject or approve spend
proposals, with a maximum approval limit of 10,000,000 DOT.

Additionally, we introduce the Asset Rate Pallet Instance to establish
conversion rates from asset A to B. This is used to determine if a
proposed spend amount involving a non-native asset is permissible by the
commanding origin. The rates can be set up by the Root, Treasurer
origins, or Voice of all Fellows.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: joepetrowski <[email protected]>

As per title.

Fix in ark-scale `TypeInfo` implementation

`polkadot-sdk` version of original tasks PR located here:
https://github.com/paritytech/substrate/pull/14329

Fixes #206

## Status
- [x] Generic `Task` trait
- [x] `RuntimeTask` aggregated enum, compatible with
`construct_runtime!`
- [x] Casting between `Task` and `RuntimeTask` without needing `dyn` or
`Box`
- [x] Tasks Example pallet
- [x] Runtime tests for Tasks example pallet
- [x] Parsing for task-related macros
- [x] Retrofit parsing to make macros optional
- [x] Expansion for task-related macros
- [x] Adds support for args in tasks
- [x] Retrofit tasks example pallet to use macros instead of manual
syntax
- [x] Weights
- [x] Cleanup
- [x] UI tests
- [x] Docs

## Target Syntax
Adapted from
https://github.com/paritytech/polkadot-sdk/issues/206#issue-1865172283

```rust
// NOTE: this enum is optional and is auto-generated by the other macros if not present
#[pallet::task]
pub enum Task<T: Config> {
    AddNumberIntoTotal {
        i: u32,
    }
}

/// Some running total.
#[pallet::storage]
pub(super) type Total<T: Config<I>, I: 'static = ()> =
StorageValue<_, (u32, u32), ValueQuery>;

/// Numbers to be added into the total.
#[pallet::storage]
pub(super) type Numbers<T: Config<I>, I: 'static = ()> =
StorageMap<_, Twox64Concat, u32, u32, OptionQuery>;

#[pallet::tasks_experimental]
impl<T: Config<I>, I: 'static> Pallet<T, I> {
	/// Add a pair of numbers into the totals and remove them.
	#[pallet::task_list(Numbers::<T, I>::iter_keys())]
	#[pallet::task_condition(|i| Numbers::<T, I>::contains_key(i))]
	#[pallet::task_index(0)]
	pub fn add_number_into_total(i: u32) -> DispatchResult {
		let v = Numbers::<T, I>::take(i).ok_or(Error::<T, I>::NotFound)?;
		Total::<T, I>::mutate(|(total_keys, total_values)| {
			*total_keys += i;
			*total_values += v;
		});
		Ok(())
	}
}
```

---------

Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Nikhil Gupta <>
Co-authored-by: Gavin Wood <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: gupnik <[email protected]>

Using hashmap instead (hashset do not expose entry), to get the default
random hasher her.

`testnets-common` was introduced recently to start to separate testnet
parachain configurations from those of Polkadot and Kusama.

The `locks-review` and `polkadot-review` requirements are removed from
`parachains-common` in
https://github.com/paritytech/polkadot-sdk/pull/2564 and there are
[plans](https://github.com/paritytech/polkadot-sdk/pull/2564#discussion_r1410882115)
to move the Polkadot and Kusama contents of that package to the
fellowship, `testnets-common` is no longer needed.

This PR removes the crate and replaces uses of it in
`collectives-westend`, the only place it is currently used.

Closes https://github.com/paritytech/polkadot-sdk/issues/2319

Changes:
- Ensure that only `enqueue_message(s)` is callable from within the
message processor. This prevents messed up storage that can currently
happen when the pallet is called into recursively.
- Use `H256` instead of `[u8; 32]` for clearer API.

## Details

The re-entracy check is done with the `environmental` crate by adding a
`with_service_mutex(f)` function that runs the closure exclusively. This
works since the MQ pallet is not instantiable.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

# Description

- What does this PR do? Allows to generate JSON schema for subset of XCM
in std builds
- Why are these changes needed? To support XCM messages in CosmWasm
contracts which require Schemars to generate contract clients
- How were these changes implemented and what do they affect? We will
use schema feature flag to build XCM pallet with JSON schema enabled

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [x] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [x] I have made corresponding changes to the documentation (if
applicable)
- [x] I have added tests that prove my fix is effective or that my
feature works (if applicable)
- [x] If this PR alters any external APIs or interfaces used by
Polkadot, the corresponding Polkadot PR is ready as well
  as the corresponding Cumulus PR (optional)

Bumps [rand](https://github.com/rust-random/rand) from 0.7.3 to 0.8.5.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rust-random/rand/blob/master/CHANGELOG.md">rand's
changelog</a>.</em></p>
<blockquote>
<h2>[0.8.5] - 2021-08-20</h2>
<h3>Fixes</h3>
<ul>
<li>Fix build on non-32/64-bit architectures (<a
href="https://redirect.github.com/rust-random/rand/issues/1144">#1144</a>)</li>
<li>Fix &quot;min_const_gen&quot; feature for <code>no_std</code> (<a
href="https://redirect.github.com/rust-random/rand/issues/1173">#1173</a>)</li>
<li>Check <code>libc::pthread_atfork</code> return value with panic on
error (<a
href="https://redirect.github.com/rust-random/rand/issues/1178">#1178</a>)</li>
<li>More robust reseeding in case <code>ReseedingRng</code> is used from
a fork handler (<a
href="https://redirect.github.com/rust-random/rand/issues/1178">#1178</a>)</li>
<li>Fix nightly: remove unused <code>slice_partition_at_index</code>
feature (<a
href="https://redirect.github.com/rust-random/rand/issues/1215">#1215</a>)</li>
<li>Fix nightly + <code>simd_support</code>: update
<code>packed_simd</code> (<a
href="https://redirect.github.com/rust-random/rand/issues/1216">#1216</a>)</li>
</ul>
<h3>Rngs</h3>
<ul>
<li><code>StdRng</code>: Switch from HC128 to ChaCha12 on emscripten (<a
href="https://redirect.github.com/rust-random/rand/issues/1142">#1142</a>).
We now use ChaCha12 on all platforms.</li>
</ul>
<h3>Documentation</h3>
<ul>
<li>Added docs about rand's use of const generics (<a
href="https://redirect.github.com/rust-random/rand/issues/1150">#1150</a>)</li>
<li>Better random chars example (<a
href="https://redirect.github.com/rust-random/rand/issues/1157">#1157</a>)</li>
</ul>
<h2>[0.8.4] - 2021-06-15</h2>
<h3>Additions</h3>
<ul>
<li>Use const-generics to support arrays of all sizes (<a
href="https://redirect.github.com/rust-random/rand/issues/1104">#1104</a>)</li>
<li>Implement <code>Clone</code> and <code>Copy</code> for
<code>Alphanumeric</code> (<a
href="https://redirect.github.com/rust-random/rand/issues/1126">#1126</a>)</li>
<li>Add <code>Distribution::map</code> to derive a distribution using a
closure (<a
href="https://redirect.github.com/rust-random/rand/issues/1129">#1129</a>)</li>
<li>Add <code>Slice</code> distribution (<a
href="https://redirect.github.com/rust-random/rand/issues/1107">#1107</a>)</li>
<li>Add <code>DistString</code> trait with impls for
<code>Standard</code> and <code>Alphanumeric</code> (<a
href="https://redirect.github.com/rust-random/rand/issues/1133">#1133</a>)</li>
</ul>
<h3>Other</h3>
<ul>
<li>Reorder asserts in <code>Uniform</code> float distributions for
easier debugging of non-finite arguments
(<a
href="https://redirect.github.com/rust-random/rand/issues/1094">#1094</a>,
<a
href="https://redirect.github.com/rust-random/rand/issues/1108">#1108</a>)</li>
<li>Add range overflow check in <code>Uniform</code> float distributions
(<a
href="https://redirect.github.com/rust-random/rand/issues/1108">#1108</a>)</li>
<li>Deprecate <code>rngs::adapter::ReadRng</code> (<a
href="https://redirect.github.com/rust-random/rand/issues/1130">#1130</a>)</li>
</ul>
<h2>[0.8.3] - 2021-01-25</h2>
<h3>Fixes</h3>
<ul>
<li>Fix <code>no-std</code> + <code>alloc</code> build by gating
<code>choose_multiple_weighted</code> on <code>std</code> (<a
href="https://redirect.github.com/rust-random/rand/issues/1088">#1088</a>)</li>
</ul>
<h2>[0.8.2] - 2021-01-12</h2>
<h3>Fixes</h3>
<ul>
<li>Fix panic in <code>UniformInt::sample_single_inclusive</code> and
<code>Rng::gen_range</code> when
providing a full integer range (eg <code>0..=MAX</code>) (<a
href="https://redirect.github.com/rust-random/rand/issues/1087">#1087</a>)</li>
</ul>
<h2>[0.8.1] - 2020-12-31</h2>
<h3>Other</h3>
<ul>
<li>Enable all stable features in the playground (<a
href="https://redirect.github.com/rust-random/rand/issues/1081">#1081</a>)</li>
</ul>
<h2>[0.8.0] - 2020-12-18</h2>
<h3>Platform support</h3>
<ul>
<li>The minimum supported Rust version is now 1.36 (<a
href="https://redirect.github.com/rust-random/rand/issues/1011">#1011</a>)</li>
<li><code>getrandom</code> updated to v0.2 (<a
href="https://redirect.github.com/rust-random/rand/issues/1041">#1041</a>)</li>
<li>Remove <code>wasm-bindgen</code> and <code>stdweb</code> feature
flags. For details of WASM support,</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/rust-random/rand/commit/937320cbfeebd4352a23086d9c6e68f067f74644"><code>937320c</code></a>
Update CHANGELOG for 0.8.5 (<a
href="https://redirect.github.com/rust-random/rand/issues/1221">#1221</a>)</li>
<li><a
href="https://github.com/rust-random/rand/commit/2924af688d352b889322870d017356f12651866b"><code>2924af6</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-random/rand/issues/1183">#1183</a>
from vks/fill-float-doc</li>
<li><a
href="https://github.com/rust-random/rand/commit/dbbc1bf3176138c867f3d84c0c4d288119a5a84e"><code>dbbc1bf</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-random/rand/issues/1218">#1218</a>
from Will-Low/master</li>
<li><a
href="https://github.com/rust-random/rand/commit/9f20df04d88698c38515833d6db62d7eb50d8b80"><code>9f20df0</code></a>
Making distributions comparable by deriving PartialEq. Tests
included</li>
<li><a
href="https://github.com/rust-random/rand/commit/a407bdfa4563d0cfbf744049242926c8de079d3f"><code>a407bdf</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-random/rand/issues/1216">#1216</a>
from rust-random/work5</li>
<li><a
href="https://github.com/rust-random/rand/commit/d3ca11b0bcc1f42fe34ba4f90f99509b7eb4ff18"><code>d3ca11b</code></a>
Update to packed_simd_2 0.3.7</li>
<li><a
href="https://github.com/rust-random/rand/commit/fa04c15d0bb5842fdbdbb73d7a53ead36f3fcf52"><code>fa04c15</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-random/rand/issues/1215">#1215</a>
from Lantern-chat/master</li>
<li><a
href="https://github.com/rust-random/rand/commit/73f8ffd16379390e624ac53cd6882dd679dd9a6f"><code>73f8ffd</code></a>
Remove unused <code>slice_partition_at_index</code> feature</li>
<li><a
href="https://github.com/rust-random/rand/commit/8f372500f05dfadcff6c35e773e81029ab7debad"><code>8f37250</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-random/rand/issues/1208">#1208</a>
from newpavlov/rand_distr/fix_no_std</li>
<li><a
href="https://github.com/rust-random/rand/commit/9ef737ba5b814f6ab36cebafb59ad29885d68a05"><code>9ef737b</code></a>
update changelog</li>
<li>Additional commits viewable in <a
href="https://github.com/rust-random/rand/compare/0.7.3...0.8.5">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=rand&package-manager=cargo&previous-version=0.7.3&new-version=0.8.5)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

As suggested in this thread:
https://github.com/polkadot-fellows/runtimes/pull/87#discussion_r1400237122

We already have the `IsChildSystemParachain`, which may be used at relay
chain, but it can't be used at a parachain level. So let's use
`AllSiblingSystemParachains` for that. I was thinking about
`AllSystemParachains`, but it may cause wrong impression that it can be
used at a relay chain level.

---------

Co-authored-by: joe petrowski <[email protected]>

## Summary

This PR aligns Rococo/Westend bridge with latest Bridges repo
development:
- https://github.com/paritytech/parity-bridges-common/pull/2727
- https://github.com/paritytech/parity-bridges-common/pull/2728
- https://github.com/paritytech/parity-bridges-common/pull/2729




Part of: https://github.com/paritytech/parity-bridges-common/issues/2452

# Motivation (+testing)

### Enable easy `ForeignAssets` transfers using `pallet-xcm` 

We had just previously added capabilities to teleport fees during
reserve-based transfers, but what about reserve-transferring fees when
needing to teleport some non-fee asset?

This PR aligns everything under either explicit reserve-transfer,
explicit teleport, or this new flexible `transfer_assets()` which can
mix and match as needed with fewer artificial constraints imposed to the
user.

This will enable, for example, a (non-system) parachain to teleport
their `ForeignAssets` assets to AssetHub while using DOT to pay fees.
(the assets are teleported - as foreign assets should from their owner
chain - while DOT used for fees can only be reserve-based transferred
between said parachain and AssetHub).

Added `xcm-emulator` tests for this scenario ^.

# Description

Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based
transfers for all `assets` including fees.

Similarly `(limited_)teleport_assets` only allows teleports for all
`assets` including fees.
    
For complex combinations of asset transfers where assets and fees may
have different reserves or different reserve/teleport trust
configurations, users can use the newly added `transfer_assets()`
extrinsic which is more flexible in allowing more complex scenarios.

`assets` (excluding `fees`) must have same reserve location or otherwise
be teleportable to `dest`.
No limitations imposed on `fees`.

- for local reserve: transfer assets to sovereign account of destination
chain and forward a notification XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`.
- for destination reserve: burn local assets and forward a notification
to `dest` chain to withdraw the reserve assets from this chain's
sovereign account and deposit them to `beneficiary`.
- for remote reserve: burn local assets, forward XCM to reserve chain to
move reserves from this chain's SA to `dest` chain's SA, and forward
another XCM to `dest` to mint and deposit reserve-based assets to
`beneficiary`.
- for teleports: burn local assets and forward XCM to `dest` chain to
mint/teleport assets and deposit them to `beneficiary`.

## Review notes

Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the
rest of the PR is new tests and improving existing tests.

---------

Co-authored-by: command-bot <>

Bumps [parity-db](https://github.com/paritytech/parity-db) from 0.4.10
to 0.4.12.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/paritytech/parity-db/blob/master/CHANGELOG.md">parity-db's
changelog</a>.</em></p>
<blockquote>
<h2>[v0.4.12] - 2023-10-12</h2>
<ul>
<li>CI for windows and macos. Also fixes access denied error on windows
<a
href="https://redirect.github.com/paritytech/parity-db/pull/222"><code>[#222](https://github.com/paritytech/parity-db/issues/222)</code></a></li>
<li>Force alignment for all chunk buffers <a
href="https://redirect.github.com/paritytech/parity-db/pull/225"><code>[#225](https://github.com/paritytech/parity-db/issues/225)</code></a></li>
</ul>
<h2>[v0.4.11] - 2023-09-13</h2>
<ul>
<li>Make <code>madvise_random</code> compatible with non-Unix OS <a
href="https://redirect.github.com/paritytech/parity-db/pull/221"><code>[#221](https://github.com/paritytech/parity-db/issues/221)</code></a></li>
<li>Explicit <code>funlock</code> <a
href="https://redirect.github.com/paritytech/parity-db/pull/218"><code>[#218](https://github.com/paritytech/parity-db/issues/218)</code></a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/paritytech/parity-db/commit/47b6c98455f8875b6eeb980d35a2be62f64d074f"><code>47b6c98</code></a>
Bump version</li>
<li><a
href="https://github.com/paritytech/parity-db/commit/ec686930169b84d21336bed6d6f05c787a17d61f"><code>ec68693</code></a>
Force alignment for all chunk buffers (<a
href="https://redirect.github.com/paritytech/parity-db/issues/225">#225</a>)</li>
<li><a
href="https://github.com/paritytech/parity-db/commit/4ac2aca38c6984f8a48080875590a687041a39d8"><code>4ac2aca</code></a>
CI for windows and macos (<a
href="https://redirect.github.com/paritytech/parity-db/issues/222">#222</a>)</li>
<li><a
href="https://github.com/paritytech/parity-db/commit/2c52598b9c53519b61cb078c81ea427b287558d7"><code>2c52598</code></a>
Bump version</li>
<li><a
href="https://github.com/paritytech/parity-db/commit/f537334507bb357330753398868f040b8e9ff9d3"><code>f537334</code></a>
Make <code>madvise_random</code> compatible with non-Unix OS (<a
href="https://redirect.github.com/paritytech/parity-db/issues/221">#221</a>)</li>
<li><a
href="https://github.com/paritytech/parity-db/commit/8eae5d3e5e2a304052f7cca75eb249080f6a7790"><code>8eae5d3</code></a>
Explicit funlock (<a
href="https://redirect.github.com/paritytech/parity-db/issues/218">#218</a>)</li>
<li>See full diff in <a
href="https://github.com/paritytech/parity-db/compare/v0.4.10...v0.4.12">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=parity-db&package-manager=cargo&previous-version=0.4.10&new-version=0.4.12)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [tracing-core](https://github.com/tokio-rs/tracing) from 0.1.31 to
0.1.32.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/tokio-rs/tracing/releases">tracing-core's
releases</a>.</em></p>
<blockquote>
<h2>tracing-core 0.1.32</h2>
<h3>Documented</h3>
<ul>
<li>Fix typo in <code>field</code> docs (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2611">#2611</a>)</li>
<li>Remove duplicate wording (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2674">#2674</a>)</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Allow <code>ValueSet</code>s of any length (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2508">#2508</a>)</li>
</ul>
<p><a
href="https://redirect.github.com/tokio-rs/tracing/issues/2611">#2611</a>:
<a
href="https://redirect.github.com/tokio-rs/tracing/pull/2611">tokio-rs/tracing#2611</a>
<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2674">#2674</a>:
<a
href="https://redirect.github.com/tokio-rs/tracing/pull/2674">tokio-rs/tracing#2674</a>
<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2508">#2508</a>:
<a
href="https://redirect.github.com/tokio-rs/tracing/pull/2508">tokio-rs/tracing#2508</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/tokio-rs/tracing/commit/c4b2a56937dd40aaa2e2991636eca6748353201f"><code>c4b2a56</code></a>
chore: prepare tracing-core 0.1.32 (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2754">#2754</a>)</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/2502f19d934b092fc01bb7493eacbb16b4038bf3"><code>2502f19</code></a>
chore: prepare tracing-attributes 0.1.27 (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2756">#2756</a>)</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/90487620d8fd4b0a44e6a0385bda3643bf6f19a2"><code>9048762</code></a>
Revert &quot;log: update to env_logger 0.10 to fix GHSA-g98v-hv3f-hcfr
(<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2740">#2740</a>)&quot;
(#...</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/6ba5af2ce2a814fea521d2d0a5ea1e88d7b6011e"><code>6ba5af2</code></a>
docs: remove mention of <code>Registration</code> on v0.1.x (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2753">#2753</a>)</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/11aac9a07c4aac35b12ea82d8a5b1cb00a118928"><code>11aac9a</code></a>
log: deprecate <code>env_logger</code> in favor of
<code>tracing_subscriber::fmt::Subscriber</code>...</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/2f27752a9912f03ed64e2b29e1ea06ebb4b09e83"><code>2f27752</code></a>
chore: remove <code>env_logger</code> from <code>hyper</code>
example</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/f96846d78a3f240a2c81636a7d6921e5d74ac79f"><code>f96846d</code></a>
attributes: fix typo &quot;overriden&quot; =&gt; &quot;overridden&quot;
(<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2719">#2719</a>)</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/71b5b2c5792ee6cd4e98112a90f9fcd19dd1ddc0"><code>71b5b2c</code></a>
subscriber: make <code>format::Writer::new()</code> public (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2680">#2680</a>)</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/f8c000202a30f8b9814b21a1e949ab35aeca5954"><code>f8c0002</code></a>
attributes: fix clippy warning in attributes tests (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2742">#2742</a>)</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/60b2dc34662648b91d69b2fa51d18d3677ddbce7"><code>60b2dc3</code></a>
journald: fix clippy <code>unwrap_or_default</code> warning (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2742">#2742</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/tokio-rs/tracing/compare/tracing-core-0.1.31...tracing-core-0.1.32">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=tracing-core&package-manager=cargo&previous-version=0.1.31&new-version=0.1.32)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

---------

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: command-bot <>
Co-authored-by: Liam Aharon <[email protected]>

# Description

just ensures

```sh
cargo check --package staging-xcm  --no-default-features  --target wasm32-unknown-unknown --features=std
```

work (for CosmWasm)

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [x] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)

---------

Co-authored-by: Bastian Köcher <[email protected]>

Co-authored-by: Javier Viola <[email protected]>