- Jun 09, 2020
-
-
Cecile Tonglet authored
* Initial commit Forked at: 49b15615 Parent branch: origin/master * Add a Service Configuration's field + adapt informant + provide means to CLI * CLEANUP Forked at: 49b15615 Parent branch: origin/master * fix tests * fixed bad path to object * Change OutputFormat enum to struct * Add informant_prefix to builder and service * Revert "Change OutputFormat enum to struct" This reverts commit cd86c583. * Revert "fix tests" This reverts commit a3c306eb. * Revert "Add a Service Configuration's field + adapt informant + provide means to CLI" This reverts commit 9c2e7267. * Implementation using the ServiceBuilder * reduce line length * fix line width again * WIP Forked at: 49b15615 Parent branch: origin/master * WIP Forked at: 49b15615 Parent branch: origin/master * WIP Forked at: 49b15615 Parent branch: origin/master * use struct instead of enum * WIP Forked at: 49b15615 Parent branch: origin/master * Update client/service/src/lib.rs Co-authored-by:
Bastian Köcher <[email protected]> * improve doc * Update client/service/src/builder.rs Co-authored-by:
-
- Jun 08, 2020
-
-
Benjamin Kampmann authored
-
- Jun 03, 2020
-
-
Cecile Tonglet authored
* Initial commit Forked at: 2743ed4b Parent branch: origin/master * Add run_full_node, run_light_node and print_node_infos to the API * Update runner.rs
-
Nikolay Volf authored
-
- Jun 01, 2020
-
-
Dan Forbes authored
-
- May 26, 2020
-
-
Bastian Köcher authored
If we are running `--dev` chain, we should forbid the `--chain` argument. The `--dev` chain is always special by only having one authority etc and some other chain spec is probably not setup for this correctly. In the end `--dev` is just a shortcut for `--validator --alice`.
-
- May 25, 2020
-
-
Arkadiy Paronyan authored
* Use directories instead of app_dirs * Use local data dir
-
- May 22, 2020
-
-
pscott authored
* Add BlockStream Enum and utility fn * WIP: Modify import closure to work with BlockStream * Fix trait bounds * Working prototype * Revamp block importing * Add export_import_flow tests * Add comments and clean code * Add more comments in the import fn * Add link code to import function * Add condition when returning Ready(Ok(()) to make sure we've imported every block * Add check for imported blocks in JSON case * Use rest pattern * Fix compilation error for undeclared variable * Add polling and waker before pending * Print read_block_count instead of count * Simplify binary cli option with structopt * Update test to reflect changes in CLI api * Change Stream to take SignedBlock<B> instead of B * Add comments to BlockStream * Move out logic to smaller functions for clearer code * Remove result over import_blocks return type * Check for error in command output rather than simply checking command exit status * Revamp export/import/revert testing * Fix minor typos and formatting errors Co-authored-by:
Gavin Wood <[email protected]> * Actually rename Cmd to Command * Apply suggestions from code review Co-authored-by:
Benjamin Kampmann <[email protected]>
-
- May 21, 2020
-
-
clearloop authored
-
Arkadiy Paronyan authored
* Handle piping error for commands that output to stdout * Apply suggestions from code review Co-authored-by:
-
- May 20, 2020
-
-
Pierre Krieger authored
-
- May 18, 2020
-
-
Pierre Krieger authored
* Upgrade to libp2p v0.19 * Listen on IPv6 by default * Increase channels sizes * Use spec-compliant noise protocol * Show legacy PeerId * Switch order of Noise protocols * Switch to crates.io version * Fix subkey's version * Fix line width and Wasm build * I think Wasm is fixed for real this time
-
Nikolay Volf authored
-
- May 15, 2020
-
-
Benjamin Kampmann authored
-
- May 14, 2020
-
-
Pierre Krieger authored
-
- May 13, 2020
-
-
Bastian Köcher authored
Instead of resetting `SIGPIPE` to the system default handler, we now handle a clap error manually and ignore any error when writing to `stdout`/`stderr`. In this way, the node does not silently stops when it encounters a `SIGPIPE` in normal mode and we still support piping of the cli output.
-
- May 12, 2020
-
-
Pierre Krieger authored
* Spawn the network worker with spawn_blocking * Some comment adjustments * Fix shutdown not working
-
Pierre Krieger authored
* Allow passing multiple --log CLI options * Comment typo
-
- May 07, 2020
-
-
Bastian Köcher authored
-
- May 06, 2020
-
-
Igor Matuszewski authored
* client: Replace `unsafe_rpc_expose` with an `RpcMethods` enum which can be either Default, Safe or Unsafe. The idea is to have the following: | | --rpc-external=false | --rpc-external=true | |--------------------- |------------------- |----------------- | | --rpc-methods=Default | | unsafe calls denied | | --rpc-methods=Safe | unsafe calls denied | unsafe calls denied | | --rpc-methods=Unsafe | | | Since the previous `unsafe-rpc-expose` option was confusing. * client: Only warn against exposing externally unsafe RPC method set * Apply suggestions from code review Co-Authored-By:
Cecile Tonglet <[email protected]> * cli: Rephrase doc comment for rpc_methods config * Improve debuggability of build_spec_works ...by printing to stderr the stderr of the command. This is normally suppressed for succesful tests but not for failing ones - if that's the case then it's useful to see the test failure reason inline rather than having to execute the command separately ourselves. * Rename RpcMethods::{Default => Auto} variant * Update bin/node/cli/tests/build_spec_works.rs Co-authored-by:
Benjamin Kampmann <[email protected]> Co-authored-by:
-
- Apr 30, 2020
-
-
Bastian Köcher authored
* Export state cli * More work * Fix tests * Make it work * Fix compilation * Apply suggestions from code review
-
Arkadiy Paronyan authored
* purge-chain accepts --db option * print DB info on startup * Small refactoring * Added back &self * Add DatabaseParams for PurgeChain, ImportParams and ExportBlocks * Don't force default value * Remove unused fields * Update client/cli/src/commands/export_blocks_cmd.rs * Fix stuff Co-authored-by:
Cecile Tonglet <[email protected]> Co-authored-by:
-
- Apr 29, 2020
-
-
Saqib Rokadia authored
* Adding optional public addresses for use in network configurations to allow for proxies in front of a node. * Apply suggestions from code review Co-Authored-By:
Pierre Krieger <[email protected]>
-
pscott authored
Co-Authored-By:
-
- Apr 28, 2020
-
-
Web3 Philosopher authored
* Drop client from sc-network and sc-client-db, move LongestChain to sc-client-api * move leaves, cht, in_mem to sc-client-api, drop client from sc-finality-grandpa * drop sc-service from sc-rpc * drop sc-service from sc-consensus-aura * drop sc-client from manual-seal and babe * drop sc-client from utils/frame/rpc/system and utils/frame/benchmarking-cli * drop sc-client from bin/node and bin/node-template * drop sc-client * fix tests * remove check -p sc-client from gitlab.yml * fix warnings * fixes ui test * fix light client tests * adds associated Client type to AbstractService * adds UsageProvider to Client * fixed ui test, again * tried and failed to get node-cli to compile for wasm * thanks to tomaka for helping me get node-cli to compile for wasmm * ui test pls pas
🙏🏾 * all tests passing 🪄 * no_run documentation code * rm -f documentation code * ClientProvider * fix mega trait * move LongestChain to sc-consensus, use adds minim... -
Cecile Tonglet authored
* Initial commit Forked at: c13ad416 Parent branch: origin/master * Fix remaining issues with unsafe_pruning * Revert "Fix remaining issues with unsafe_pruning" This reverts commit 9c42c2f9. * Just remove is_dev
-
- Apr 27, 2020
-
-
André Silva authored
-
- Apr 24, 2020
-
-
Bernhard Schuster authored
Co-Authored-By:
Kian Paimani <[email protected]> Co-Authored-By:
Tomasz Drwięga <[email protected]>
-
Pierre Krieger authored
* Use new block requests protocol * Tweak comment
-
- Apr 23, 2020
-
-
Toralf Wittner authored
* network: Only insert global addresses into the DHT. Currently every address reported via libp2p-identify is inserted into the DHT which thus contains a multitude of unreachable addresses such as from 127.0.0.0/8 or 10.0.0.0/8. Issue #5099 suggested a dedicated service over UDP to gauge the reachability of an address, which would however incur extra I/O costs and be of limited use. As an alternative and simpler tactic, this PR only allows global IP addresses to be inserted into the DHT unless an explicit command-line flag `--allow-non-global-addresses-in-dht` is given or a node is started with `--dev`. This opt-in behaviour is meant to allow site-local networks to still make use of a DHT. * Enable non-global in more test setups. * Replace command-line option with different name. * Another test fix.
-
- Apr 22, 2020
-
-
Pierre Krieger authored
* Enable yamux flow control by default * Tweak description * Apply suggestions from code review
-
- Apr 20, 2020
-
-
Igor Matuszewski authored
* sc-cli: Use type-safe constructors for RPC/Prometheus interfaces * service: Simplify rpc handler creation Could probably be further simplifies once [this][commit] lands. [commit]: https://github.com/paritytech/jsonrpc/commit/20485387ed06a48f1a70bf4d609a7cde6cf0accf * service: Streamline some HTTP & WS server start logic * client: Introduce a simple RPC policy mechanism * rpc/system: Check unsafe RPCs * rpc/offchain: Check unsafe RPCs * rpc/author: Check unsafe RPCs
-
- Apr 17, 2020
-
-
Pierre Krieger authored
-
Ashley authored
* Make network_config_path an Option * Fix network tests * Use None as the network config path * Fix cli * Don't make PathBuf an Option in a cli context
-
Bastian Köcher authored
Instead of just listening on ipv4 by default, this enables listening on ipv6 as well. While doing this, it also fixes a bug which lead to always listen on all sockets, even if we specify listen addresses explicitly.
-
- Apr 15, 2020
-
-
Pierre Krieger authored
-
Gavin Wood authored
* Introduce trait * The trait * Generic * Basic impls. * Remove unneeded bounds * Minor changes * Switch over to the new DB trait * Integrated parity-db and added CLI for db selection * Default impl. * Fix logs. * Started integrating subdb * Apply suggestions from code review Co-Authored-By:
Nikolay Volf <[email protected]> * Enable subdb * Bump parity-db * Fixed CLI macro * Fixed browser build * Fixed features * Sort out features * Use parity-db from crates.io * Typo Co-authored-by:
arkpar <[email protected]> Co-authored-by:
-
- Apr 13, 2020
-
-
Gavin Wood authored
* Native version text was borked. * Unfix benchmarking.
-
- Apr 08, 2020
-
-
Pierre Krieger authored
* Add a failing test * Make test not freeze * Fix the bug * Fix spaces * Fix tests * Apply suggestions from code review Co-Authored-By:
Toralf Wittner <[email protected]> * Make sure test doesn't succeed if nothing happened * Fix build * Do the events change Co-authored-by:
-
- Apr 07, 2020
-
-
Cecile Tonglet authored
* WIP Forked at: 2afecf81 Parent branch: origin/master * Rename IntoConfiguration to CliConfiguration * Renamed into_configuration to create_configuration * WIP Forked at: 2afecf81 Parent branch: origin/master * WIP Forked at: 2afecf81 Parent branch: origin/master * Move keystore params to its own module * Use in-memory keystore even for build-spec * Enforce proper value for node name * dev_key_seed * Telemetry endpoints * rustfmt * Converted all RunCmd * rustfmt * Added export-blocks * Missed something * Removed config_path in NetworkConfiguration (not used) * Fixed warnings * public_addresses is used but never set, keeping it * Merge Configuration.node and NetworkConfiguration.node_name ...because they are the same thing * Added: import-blocks * Adding a proc_macro to help impl SubstrateCli * WIP Forked at: 2afecf81 Parent branch: origin/master * WIP Forked at: 2afecf81 Parent branch: origin/master * WIP Forked at: 2afecf81 Parent branch: origin/master * Re-export spec_factory from sc_cli * Re-added all the commands * Refactored node_key_params * Fixed previous refucktoring * Clean-up and removed full_version() * Renamed get_is_dev to not confuse with Configuration field * Fixed sc-cli-derive example * Fixing tests * Fixing tests and removing some (will re-add later) * Fixing more tests * Removes the need of type parameter * Converting bin/node and simplifying API * Converting more * Converting last command * WIP Forked at: 2afecf81 Parent branch: origin/master * Fixing tests and added default for WasmExecutionMethod * Fixing stuff * Fixed something I broke oops * Update Cargo.lock * Moving things around * Convert everything to Result * Added new macros to simplify the impl of CliConfiguration * Added a macro to generate CliConfiguration automatically for subcommands * Revert... too many macros (this one is not really useful) This reverts commit 9c516dd3 . * Renamed is_dev to get_is_dev Good enough for now * Fixed name roles (this is plural, not singular) * Clean-up * Re-export NodeKeyConfig and TelemetryEndpoints from sc_service * Improve styling/formatting * Added copyrights * Added doc and fixed warnings * Added myself to code owners * Yes it is needed according to the history * Revert formatting * Fixing conflict * Updated build.rs * Cargo.lock * Clean-up * Update client/cli-derive/Cargo.toml Co-Authored-By:
Seun Lanlege <[email protected]> * Fail if using proc_macro and build.rs is not set properly * Dropped all get_ in front of methods * Clean-up * Fixing proc macro missing env var * Get the configuration inside the Runtime (needed for polkadot) * Clean-up * Get is_dev from argument like the others * Get chain ID instead of chain spec from shared params * &self is passed to spec_factory/load_spec * Wrong text * Fix example * Officialize macro and made a cool doc * Renamed spec_factory to load_spec (substrate_cli_configuration) * Removed not so useful ChainSpec * Renamed SubstrateCLI to SubstrateCli * Added changelog for impl_version being full now * Renamed Runtime to Runner * Update changelog to show example * Removed option on database cache size * WIP Forked at: 2afecf81 Parent branch: origin/master * Fix on removal of option * typo * Clean-up imports * Added info in Cargo.toml * typo * remarks * Moved function for build.rs to substrate-build-script-utils * Fixed example & test of cli-derive * Moved function for build.rs to substrate-build-script-utils * Renamed substrate_cli_configuration to substrate_cli oops It implements SubstrateCli not CliConfiguration! * Added documentation and wrapper macro * Removed option on database cache size * Removed option on database cache size * Clean-up * Reduce risk of errors due to typos * Removed option on database cache size * Added NOTE as suggested * Added doc as suggested * Fixed test * typo * renamed runtime to runner * Fixed weird argument * More commas * Moved client/cli-derive to client/cli/derive * Added 7 tests for the macros * Improve error message * Upgrade assert_cmd * Fixing missing stuff * Fixed unused import * Improve SubstrateCli doc * Applied suggestions * Fix and clean-up imports * Started replacing macros WIP * WIP Forked at: 2afecf81 Parent branch: origin/master * WIP Forked at: 2afecf81 Parent branch: origin/master * WIP Forked at: 2afecf81 Parent branch: origin/master * Started removing substrate_cli * WIP Forked at: 2afecf81 Parent branch: origin/master * WIP Forked at: 2afecf81 Parent branch: origin/master * WIP Forked at: 2afecf81 Parent branch: origin/master * fixed bug introduced while refactoring * Renamed NetworkConfigurationParams to NetworkParams for consistency sake * Fixed test * Update client/cli/src/commands/runcmd.rs Co-Authored-By:
-
