closes https://github.com/paritytech/polkadot-sdk/issues/158.
partially addresses
https://github.com/paritytech/polkadot-sdk/issues/226.

Instead of fragile calculation of current balance by looking at `free
balance - ED`, Nomination Pool now freezes ED in the pool reward account
to restrict an account from going below minimum balance. This also has a
nice side effect that if ED changes, we know how much is the imbalance
in ED frozen in the pool and the current required ED. A pool operator
can diligently top up the pool with the deficit in ED or vice versa,
withdraw the excess they transferred to the pool.

## Notable changes
- New call `adjust_pool_deposit`: Allows to top up the deficit or
withdraw the excess deposited funds to the pool.
- Uses Fungible trait (instead of Currency trait). Since NP was not
doing any locking/reserving previously, no migration is needed for this.
- One time migration of freezing ED from each of the existing pools (not
very PoV friendly but fine for relay chain).

This PR is part of [Sync
2.0](https://github.com/paritytech/polkadot-sdk/issues/534) refactoring
aimed at making `ChainSync` a pure state machine.

Resolves https://github.com/paritytech/polkadot-sdk/issues/501.

# Description
This PR introduces two changes:
- the previous `Tracing` trait has been modified to accept contract
address instead of code hash (seems to be way more convenient)
- a new trait `CallInterceptor` that allows intercepting contract calls;
in particular the default implementation for `()` will just proceed in a
standard way (after compilation optimizations, there will be no
footprint of that); however, implementing type might decide to mock
invocation and return `ExecResult` instead

Note: one might try merging `before_call` and `intercept_call`. However,
IMHO this would be bad, since it would mix two completely different
abstractions - tracing without any effects and actual intervention into
execution process.

This will unblock working on mocking contracts utility in drink and
similar tools (https://github.com/Cardinal-Cryptography/drink/issues/33)

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling
requirements](https://github.com/paritytech/polkadot-sdk/blob/master/docs/CONTRIBUTING.md#process)
of this project (at minimum one label for `T` required)
- [x] I have made corresponding changes to the documentation (if
applicable)
- [x] I have added tests that prove my fix is effective or that my
feature works (if applicable)

This reverts commit b749ff22 (#1745).

This pull request is removing the Kusama and Polkadot runtime crates. As
still some crates dependent on the runtime crates, this pull request is
doing some more changes.

- It removes the `hostperfcheck` CLI command. This CLI command could
compare the current node against the standard hardware by doing some
checks. Later we added the hardware benchmark feature to Substrate. This
hardware benchmark is running on every node startup and prints a warning
if the current node is too slow. This makes this CLI command a duplicate
that was also depending on the kusama runtime.

- The pull request is removing the emulated integration tests that were
requiring the Kusama or Polkadot runtime crates.

Closes #1671 

Adds a `type_id` function to the `Extension` trait, allowing to properly store an retrieve
boxed `Extensions`.

---------

Co-authored-by: Bastian Köcher <[email protected]>

This PR adjusts the serialized format of the the returned RuntimeVersion
in the rpc-spec-v2 methods. This is done to match the format defined
here:
https://paritytech.github.io/json-rpc-interface-spec/api/chainHead_unstable_follow.html#about-the-runtime

- ##### `apis` field as object
`apis` field of `RuntimeVersion` is now returned as an object, e.g. 
```
"apis": {
      "0xdf6acb689907609b": 3,
      "0x37e397fc7c91f5e4": 1,
}
```
instead of 
```
"apis": [
      ["0xdf6acb689907609b", 3],
      ["0x37e397fc7c91f5e4", 1],
]
```
- ##### removed `stateVersion` and `authoringVersion`
`stateVersion` and `authoringVersion` are no longer returned in the
`RuntimeVersion` JSON Object.

- ##### block index in chain head events as integer

### Related Issues

Closes: #1507
Closes: #1146

### Testing Done
Adjusted existing tests to make sure data is returned in the correct
format.

This pull request is to fix the output text misalignment of `subkey
inspect` command:

(the `Network ID` line has an extra space at the end, and the `Secret
seed` line lacks a leading space)

```
[btwiuse@railway ~]$ subkey inspect '' | cat -A
Secret Key URI `` is account:$
  Network ID:        substrate $
 Secret seed:       0xfac7959dbfe72f052e5a0c3c8d6530f202b02fd8f9f5ca3580ec8deb7797479e$
  Public key (hex):  0x46ebddef8cd9bb167dc30878d7113b7e168e6f0646beffd77d69d39bad76b47a$
  Account ID:        0x46ebddef8cd9bb167dc30878d7113b7e168e6f0646beffd77d69d39bad76b47a$
  Public key (SS58): 5DfhGyQdFobKM8NsWvEeAKk5EQQgYe9AydgJ7rMB6E1EqRzV$
  SS58 Address:      5DfhGyQdFobKM8NsWvEeAKk5EQQgYe9AydgJ7rMB6E1EqRzV$
```

The output should be in the same YAML-like format as `subkey generate`:

```
[btwiuse@railway ~]$ subkey generate  | cat -A
Secret phrase:       awkward eagle survey resemble novel resist modify memory pistol shed flower run$
  Network ID:        substrate$
  Secret seed:       0x20502f79366325b7dc7620664e8844ae69d441baf6e5b571a57d3b3ff28e9586$
  Public key (hex):  0x468874b9e5b6b77333fa702b9201b924d6834bf956e33e2bbe37d131134ca830$
  Account ID:        0x468874b9e5b6b77333fa702b9201b924d6834bf956e33e2bbe37d131134ca830$
  Public key (SS58): 5DfBkAMg5xQmsePFr3BWLZm99smiNyy9axWSgembvFgDKh9v$
  SS58 Address:      5DfBkAMg5xQmsePFr3BWLZm99smiNyy9axWSgembvFgDKh9v$
```

This change will fix `subkey` as well as all binaries that embed it as
the `key` subcommand, for example: `substrate key`, `polkadot key`, etc.

---------

Co-authored-by: Liam Aharon <[email protected]>

This PR implements:
- `archive_unstable_finalized_height`: Get the height of the most recent
finalized block
- `archive_unstable_hash_by_height`: Get the hashes (possible empty) of
blocks from the given height
- `archive_unstable_call`: Call into the runtime of a block

Builds on top of: https://github.com/paritytech/polkadot-sdk/pull/1560

### Testing Done
- unit tests for the methods with custom block tree for different
heights / forks

Closes: https://github.com/paritytech/polkadot-sdk/issues/1510
Closes: https://github.com/paritytech/polkadot-sdk/issues/1513
Closes: https://github.com/paritytech/polkadot-sdk/issues/1511

@paritytech/subxt-team

---------

Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>

The PR exposes the `rpc_methods` name in the `rpc_methods` response.
This feature is useful for servers that only forward requests to methods
that are reported by the `rpc_methods`.

Jsonrpsee exposes the available methods registered so far. Registering
the `rpc_methods` requires a closure that already stores the result. As
such, the `rpc_methods` method name is manually added to the available
methods.

Closes: https://github.com/paritytech/polkadot-sdk/issues/1627

### Testing Done

```
$> curl -H "Content-Type: application/json" -d '{"id":1, "jsonrpc":"2.0", "method": "rpc_methods", "params":[]}' http://localhost:9944

{"jsonrpc":"2.0","result":{"methods":["account_nextIndex",... "rpc_methods",..."unsubscribe_newHead"]},"id":1}⏎
```

@paritytech/subxt-team

---------

Signed-off-by: Alexandru Vasile <[email protected]>

[`RococoGenesisExt`](https://github.com/paritytech/polkadot-sdk/blob/a414ea75

/polkadot/node/service/src/chain_spec.rs#L152-L171)
is removed. It was the hack to allow overwriting
`EpochDurationInBlocks`. Removal of `RococGenesisExt` prevents from
manipulating the state to change the runtime constants.

Changes:
- Environment variable which controls the `time::EpochDurationInBlocks`
value was added: `ROCOCO_EPOCH_DURATION` (epoch duration will be set to
the value of env),
- `10,100,600` versions of rococo-runtime are built in CI and put into `polkadot-debug` docker image.

`rococo-runtime` building examples:
- to build runtime for `versi_staging_testnet` which had
EpochDurationInBlocks set to 100:
  ```
ROCOCO_EPOCH_DURATION=100 cargo build --features=fast-runtime -p
rococo-runtime
  ```
- to build runtime for `wococo_development`
  ```
ROCOCO_EPOCH_DURATION=10 cargo build --features=fast-runtime -p
rococo-runtime
  ```
- to build `versi-staging` chain spec:
  ```
ROCOCO_EPOCH_DURATION=100 cargo run -p polkadot --features=fast-runtime
-- build-spec --chain versi-staging --raw
  ```
- to build `wococo-dev` chain spec:
  ```
ROCOCO_EPOCH_DURATION=10 cargo run -p polkadot --features=fast-runtime
-- build-spec --chain wococo-dev --raw
  ```

It is also possible to change the epoch duration by replacing the `code` field in the chain spec with the hex dump of pre-built runtime wasm blob (because the epoch duration is hard-coded into wasm blob).

---------

Co-authored-by: Bastian Köcher <[email protected]>

Last week we experienced a governance attack.
Surprisingly, there was no upper limit on the tip amount.

Due to the mechanism of pallet-fragment-election, the council members
will be refreshed immediately. Attacker is easy to control the council
and give a large tip amount.

Add missing events for pallet-bounties

Created a Github Action that uses the [Review-Bot
app](https://github.com/paritytech/review-bot) to require more fine
tuned requirements to review pull requests before allowing the PR to be
merged.

This uses
[`pull_request_target`](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request_target)
for the event, not `pull_request`. This is a security measure so that an
attacker doesn’t have access to the secrets.

All the rules have been copied from the original
`.github/pr-custom-review.yml` file.

I want to clarify, this particular commit is **not intended to replace
PRCR yet**.

# Advantages it brings over `PRCR`

Most of the features available in `PRCR` have been duplicated and
enhanced. For a complete detailed write up, please see:
- paritytech/pr-custom-review#114 -> Proposal for the rewrite
- [Review Bot
Documentation](https://github.com/paritytech/review-bot/blob/main/README.md)

The most important features are:
- `include` and `exclude` fields now accept an array, making it easier
to read the regular expressions.
- Ability to skip a rule
- We can set that PRs coming from a particular user or team will cause
the rule to be skipped.
- This is used in the `Audit rule`, which was requested by
@the-right-joyce.
  - This resolves paritytech/pr-custom-review#136
- Ability to request fellows instead of teams
- As requested in polkadot-fellows/runtimes#7, this bot has the ability
to request fellows by rank instead of users.
- We currently have polkadot-fellows/runtimes#31 which is using that
feature.

Aside from all the rules available in `PRCR` I have added a particular
rule to lock the review-bot files and require a review from the
`locks-review` team, the @paritytech/ci team and the
@paritytech/opstooling team to ensure that the file has been written
correctly.

## Next steps

The next steps will consist on paritytech/review-bot#53, once this issue
has been resolved, and `review-bot` has worked without any issues on
this repository for a while, we will upgrade it to be able to fully
replace `PRCR`.

Update the HRMP pallet to use field names for Event variants to improve
metadata for a better client experience.
Event variants are now structs instead of unnamed tuples.

Partially implements Substrate issue
[9903](https://github.com/paritytech/substrate/issues/9903) which
doesn't appear to have been moved to the monorepo.

Follow-up to #1543.

Move request-response handling from `ChainSync` to `SyncingEngine` as
part of [Sync
2.0](https://github.com/paritytech/polkadot-sdk/issues/534) refactoring
aimed at making `ChainSync` a pure state machine.

Resolves https://github.com/paritytech/polkadot-sdk/issues/502.

---------

Co-authored-by: Aaro Altonen <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Expand `StorageNoopGuard` to be able to add extra context through a
custom error message. When the guard is triggered it panics with an
error message which can be defaulted, set on construction, or set after
it has been constructed.

Turn `StorageNoopGuard` into struct with `storage_root` and
`error_message` and added `from_error_message` constructor and
`set_error_message` setter.

Also added `new()` aliased to `default()`.

Closes #375

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

This PR removes some unnecessary `r#`...`#` around a string and the
corresponding comment that it was done because rustfmt wasn't working
for "some reason". It seems to work fine now and clippy prefers it this
way.

---------

Co-authored-by: Joshy Orndorff <[email protected]>

Migrating [PR from the archived polkadot
repo](https://github.com/paritytech/polkadot/pull/7272)

As per
https://github.com/paritytech/polkadot/pull/7272#issuecomment-1559240466,
the changes in this MR include the following pallets into [x] Rococo and
[x] Westend runtimes:

    pallet_conviction_voting
    pallet_referenda
    pallet_ranked_collective
    pallet_custom_origins
    pallet_whitelist

And only for westend-runtime:

    pallet_treasury

Following [Kusama runtime
config](https://github.com/paritytech/polkadot/tree/dbae30efe080a1d41fe54ef4da8af47614c9ca93/runtime/kusama/src)
as a baseline.

Benchmarking of the following pallets done for both Rococo and Westend:

    pallet_conviction_voting
    pallet_referenda
    pallet_ranked_collective (only on Rococo)
    pallet_whitelist

And only for Westend:

    pallet_treasury

Removed Gov1 from Rococo as in
https://github.com/paritytech/polkadot/pull/6701

Rococo Gov1 storage will be cleaned in a different PR - [issue ](https://github.com/paritytech/polkadot-sdk/issues/1618)

---------

Co-authored-by: Giles Cope <[email protected]>

I hope it's enough to fix #1701 
the only solution I found to make it happen is to put an associated type
to the `Bounded` enum as well.
@liamaharon @Kianenigma @bkchr

 

Polkadot address: 12poSUQPtcF1HUPQGY3zZu2P8emuW9YnsPduA4XG3oCEfJVp

---------

Signed-off-by: muraca <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

- Async-backing related primitives are stable `primitives::v6`
- Async-backing API is now part of `api_version(7)`
- It's enabled on Rococo and Westend runtimes

---------

Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>

This PR implements [`GenesisBuilder`
API](https://github.com/paritytech/polkadot-sdk/blob/a414ea75

/substrate/primitives/genesis-builder/src/lib.rs#L38)
for all the runtimes in polkadot repo.

Step towards: paritytech/polkadot-sdk#25

---------

Co-authored-by: ordian <[email protected]>

It changes following APIs:
- trait `ChainApi`
-- `validate_transaction`

- trait `TransactionPool` 
--`submit_at`
--`submit_one`
--`submit_and_watch`

and some implementation details, in particular:
- impl `Pool` 
--`submit_at`
--`resubmit_at`
--`submit_one`
--`submit_and_watch`
--`prune_known`
--`prune`
--`prune_tags`
--`resolve_block_number`
--`verify`
--`verify_one`

- revalidation queue

All tests are also adjusted.

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

Bumps [directories](https://github.com/soc/directories-rs) from 4.0.1 to
5.0.1.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/soc/directories-rs/commits">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=directories&package-manager=cargo&previous-version=4.0.1&new-version=5.0.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Add debug_assertions to WASM builds in the short-benchmarks CI job.

Disallow warnings, show a full backtrace and remove the WASM output
colour to improve information from this CI step in the event of a failure.

This is motivated by a
[case](https://github.com/paritytech/polkadot-sdk/pull/1676/commits/23d64918)
where a benchmark was misconfigured in master and failing to send
notifications, but passing CI. We don't want this to fail if the problem
happens in production, but ideally we'd know from the CI if it was
misconfigured and the messages weren't getting sent, as that could
(would?) affect the weights that the benchmark generates.

Enabling debug-assertions in WASM builds for the short-benchmarks would
catch "soft" failures like this in future.

This PR ensures that all storage keys under a prefix are returned by the
`chainHead_storage` method.

Before this PR, the `storage_keys` was used with just the `start_key`.
Before the pagination event was generated, the last reported key
`last_key` was saved internally.
When the pagination is resumed, the `last_key` will serve as the next
`start_key` to the `storage_keys` API.

However, this behavior does not function properly for non-prefixed
storage keys.

Entry keys `a`, `ab`, `abc` share a common prefix and therefore the `ab`
key leads to `abc`.
However, for `a`, `ab`, `aB` and `abc`, the `aB` key does not
immediately lead to `abc`.

To mitigate this, the PR saves the start key of the query, together with
the next pagination key.
Improve testing to ensure we have a key entry that doesn't share the
prefix with the descendant key.

@paritytech/subxt-team

---------

Signed-off-by: Alexandru Vasile <[email protected]>

I had quite a few conversions to/from `u64` because these were lacking.

Let me know if others are desirable as well for symmetry.

Fix flaky test (e.g
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/3787906).
Sometimes just timeout when trying to download the artifacts from ci.
This make the download in parallel and allow for more time to complete.

Thx!

cc: @michalkucharczyk

Bumps [actions/checkout](https://github.com/actions/checkout) from 4.0.0
to 4.1.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/actions/checkout/releases">actions/checkout's
releases</a>.</em></p>
<blockquote>
<h2>v4.1.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Update README.md for V4 by <a
href="https://github.com/sivapalan"><code>@​sivapalan</code></a> in <a
href="https://redirect.github.com/actions/checkout/pull/1452">actions/checkout#1452</a></li>
<li>Add support for partial checkout filters by <a
href="https://github.com/finleygn"><code>@​finleygn</code></a> in <a
href="https://redirect.github.com/actions/checkout/pull/1396">actions/checkout#1396</a></li>
<li>Prepare 4.1.0 release by <a
href="https://github.com/cory-miller"><code>@​cory-miller</code></a> in
<a
href="https://redirect.github.com/actions/checkout/pull/1496">actions/checkout#1496</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/sivapalan"><code>@​sivapalan</code></a>
made their first contribution in <a
href="https://redirect.github.com/actions/checkout/pull/1452">actions/checkout#1452</a></li>
<li><a href="https://github.com/finleygn"><code>@​finleygn</code></a>
made their first contribution in <a
href="https://redirect.github.com/actions/checkout/pull/1396">actions/checkout#1396</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/checkout/compare/v4.0.0...v4.1.0">https://github.com/actions/checkout/compare/v4.0.0...v4.1.0</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/actions/checkout/blob/main/CHANGELOG.md">actions/checkout's
changelog</a>.</em></p>
<blockquote>
<h1>Changelog</h1>
<h2>v4.1.0</h2>
<ul>
<li><a href="https://redirect.github.com/actions/checkout/pull/1396">Add
support for partial checkout filters</a></li>
</ul>
<h2>v4.0.0</h2>
<ul>
<li><a
href="https://redirect.github.com/actions/checkout/pull/1067">Support
fetching without the --progress option</a></li>
<li><a
href="https://redirect.github.com/actions/checkout/pull/1436">Update to
node20</a></li>
</ul>
<h2>v3.6.0</h2>
<ul>
<li><a
href="https://redirect.github.com/actions/checkout/pull/1377">Fix: Mark
test scripts with Bash'isms to be run via Bash</a></li>
<li><a href="https://redirect.github.com/actions/checkout/pull/579">Add
option to fetch tags even if fetch-depth &gt; 0</a></li>
</ul>
<h2>v3.5.3</h2>
<ul>
<li><a
href="https://redirect.github.com/actions/checkout/pull/1196">Fix:
Checkout fail in self-hosted runners when faulty submodule are
checked-in</a></li>
<li><a href="https://redirect.github.com/actions/checkout/pull/1287">Fix
typos found by codespell</a></li>
<li><a href="https://redirect.github.com/actions/checkout/pull/1369">Add
support for sparse checkouts</a></li>
</ul>
<h2>v3.5.2</h2>
<ul>
<li><a href="https://redirect.github.com/actions/checkout/pull/1289">Fix
api endpoint for GHES</a></li>
</ul>
<h2>v3.5.1</h2>
<ul>
<li><a href="https://redirect.github.com/actions/checkout/pull/1246">Fix
slow checkout on Windows</a></li>
</ul>
<h2>v3.5.0</h2>
<ul>
<li><a href="https://redirect.github.com/actions/checkout/pull/1237">Add
new public key for known_hosts</a></li>
</ul>
<h2>v3.4.0</h2>
<ul>
<li><a
href="https://redirect.github.com/actions/checkout/pull/1209">Upgrade
codeql actions to v2</a></li>
<li><a
href="https://redirect.github.com/actions/checkout/pull/1210">Upgrade
dependencies</a></li>
<li><a
href="https://redirect.github.com/actions/checkout/pull/1225">Upgrade
<code>@​actions/io</code></a></li>
</ul>
<h2>v3.3.0</h2>
<ul>
<li><a
href="https://redirect.github.com/actions/checkout/pull/1045">Implement
branch list using callbacks from exec function</a></li>
<li><a href="https://redirect.github.com/actions/checkout/pull/1050">Add
in explicit reference to private checkout options</a></li>
<li>[Fix comment typos (that got added in <a
href="https://redirect.github.com/actions/checkout/issues/770">#770</a>)](<a
href="https://redirect.github.com/actions/checkout/pull/1057">actions/checkout#1057</a>)</li>
</ul>
<h2>v3.2.0</h2>
<ul>
<li><a href="https://redirect.github.com/actions/checkout/pull/942">Add
GitHub Action to perform release</a></li>
<li><a href="https://redirect.github.com/actions/checkout/pull/967">Fix
status badge</a></li>
<li><a
href="https://redirect.github.com/actions/checkout/pull/1002">Replace
datadog/squid with ubuntu/squid Docker image</a></li>
<li><a href="https://redirect.github.com/actions/checkout/pull/964">Wrap
pipeline commands for submoduleForeach in quotes</a></li>
<li><a
href="https://redirect.github.com/actions/checkout/pull/1029">Update
<code>@​actions/io</code> to 1.1.2</a></li>
<li><a
href="https://redirect.github.com/actions/checkout/pull/1039">Upgrading
version to 3.2.0</a></li>
</ul>
<h2>v3.1.0</h2>
<ul>
<li><a href="https://redirect.github.com/actions/checkout/pull/939">Use
<code>@​actions/core</code> <code>saveState</code> and
<code>getState</code></a></li>
<li><a href="https://redirect.github.com/actions/checkout/pull/922">Add
<code>github-server-url</code> input</a></li>
</ul>
<h2>v3.0.2</h2>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/actions/checkout/commit/8ade135a41bc03ea155e62e844d188df1ea18608"><code>8ade135</code></a>
Prepare 4.1.0 release (<a
href="https://redirect.github.com/actions/checkout/issues/1496">#1496</a>)</li>
<li><a
href="https://github.com/actions/checkout/commit/c533a0a4cfc4962971818edcfac47a2899e69799"><code>c533a0a</code></a>
Add support for partial checkout filters (<a
href="https://redirect.github.com/actions/checkout/issues/1396">#1396</a>)</li>
<li><a
href="https://github.com/actions/checkout/commit/72f2cec99f417b1a1c5e2e88945068983b7965f9"><code>72f2cec</code></a>
Update README.md for V4 (<a
href="https://redirect.github.com/actions/checkout/issues/1452">#1452</a>)</li>
<li>See full diff in <a
href="https://github.com/actions/checkout/compare/3df4ab11eba7bda6032a0b82a6bb43b11571feac...8ade135a41bc03ea155e62e844d188df1ea18608">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=actions/checkout&package-manager=github_actions&previous-version=4.0.0&new-version=4.1.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

# Description

We are recently trying to upgrade our Substrate version from
`polkadot-v0.9.43` to `polkadot-v1.0.0` and we noticed a critical issue:
all deployed contracts seem to be experiencing a `CodeNotFound` error.
After a thorough investigation, it appears that the root cause of this
issue lies in the mismatch between the storage alias of `CodeInfoOf<T>`
in the migration and its original definition.

This PR corrects the storage alias to align it with its original
definition

I am uncertain about the proper approach for adding tests to this
change. Would the team consider taking over this PR to bring it to
completion?

---------

Co-authored-by: pgherveou <[email protected]>

I was reading source code and noticed these two places that are no
longer true after https://github.com/paritytech/polkadot-sdk/pull/1211

Small tweak to https://github.com/paritytech/polkadot-sdk/pull/1642 to
incorporate the ideas from
https://github.com/paritytech/polkadot-sdk/issues/247.

I think this is the good middle ground, where we have good rust-docs,
and the RA users will also have some hope.

cc @wentelteefje @aaronbassett @sam0x17

Bumps [aes-gcm](https://github.com/RustCrypto/AEADs) from 0.10.2 to
0.10.3.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/7e82b01cd4901f6a35b5153536f11b87f5e4e622"><code>7e82b01</code></a>
aes-gcm v0.10.3 (<a
href="https://redirect.github.com/RustCrypto/AEADs/issues/552">#552</a>)</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/b587b27270cc300d39c496a1ab06be80d72ac107"><code>b587b27</code></a>
aes-gcm: avoid exposing plaintext on tag verification failure (<a
href="https://redirect.github.com/RustCrypto/AEADs/issues/551">#551</a>)</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/2209bcaa9edc65e9a60498e7ece5b50e66f32ebf"><code>2209bca</code></a>
build(deps): bump actions/checkout from 3 to 4 (<a
href="https://redirect.github.com/RustCrypto/AEADs/issues/548">#548</a>)</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/035ec25362886735a0f44098f85ba0501a9b4038"><code>035ec25</code></a>
build(deps): bump ascon from 0.3.1 to 0.4.0 (<a
href="https://redirect.github.com/RustCrypto/AEADs/issues/545">#545</a>)</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/e94ba5ab9fb2c7f3a18c92fb9dc8df14ac36f06b"><code>e94ba5a</code></a>
xsalsa20poly1305: remove source code (<a
href="https://redirect.github.com/RustCrypto/AEADs/issues/543">#543</a>)</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/31240c1285144aeabef3e80eb9a1b4137dc2b43f"><code>31240c1</code></a>
Update Cargo.lock</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/40240c4a852df21048830de4eed4782c0fbddaef"><code>40240c4</code></a>
Update Cargo.lock</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/be4ea6fd3bcc1c8a5a23974a43e0fc35104d8cba"><code>be4ea6f</code></a>
Update Cargo.lock</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/2aef39e90d39c247cc89ccc31628468c9a9f60de"><code>2aef39e</code></a>
Update Clippy version (<a
href="https://redirect.github.com/RustCrypto/AEADs/issues/534">#534</a>)</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/50710da0cbd47a4614b6d37119877f206c207e95"><code>50710da</code></a>
Update Cargo.lock</li>
<li>Additional commits viewable in <a
href="https://github.com/RustCrypto/AEADs/compare/aes-gcm-v0.10.2...aes-gcm-v0.10.3">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=aes-gcm&package-manager=cargo&previous-version=0.10.2&new-version=0.10.3)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/paritytech/polkadot-sdk/network/alerts).

</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Remove:

```
Polkadot companion: (*if applicable*)

Cumulus companion: (*if applicable*)
```

---------

Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

- Updated ./docs/CONTRIBUTION.md to clarify how to use command bot and
update ui-tests locally or in PR
- Moved update-ui-tests.sh to a root of project to run them along for
substrate and polkadot together

---------

Co-authored-by: Mira Ressel <[email protected]>

For tools such that is using the `Miner` it's useful to know whether a
solution was trimmed or not and also how much that was trimmed.

---------

Co-authored-by: Alexandru Vasile <[email protected]>