# Description
- Link to issue: https://github.com/paritytech/polkadot-sdk/issues/3651

polkadot address: 19nSqFQorfF2HxD3oBzWM3oCh4SaCRKWt1yvmgaPYGCo71J

# Description

Add `transfer_assets_using()` for transferring assets from local chain
to destination chain using explicit XCM transfer types such as:
- `TransferType::LocalReserve`: transfer assets to sovereign account of
destination chain and forward a notification XCM to `dest` to mint and
deposit reserve-based assets to `beneficiary`.
- `TransferType::DestinationReserve`: burn local assets and forward a
notification to `dest` chain to withdraw the reserve assets from this
chain's sovereign account and deposit them to `beneficiary`.
- `TransferType::RemoteReserve(reserve)`: burn local assets, forward XCM
to `reserve` chain to move reserves from this chain's SA to `dest`
chain's SA, and forward another XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`. Typically the remote `reserve` is
Asset Hub.
- `TransferType::Teleport`: burn local assets and forward XCM to `dest`
chain to mint/teleport assets and deposit them to `beneficiary`.

By default, an asset's reserve is its origin chain. But sometimes we may
want to explicitly use another chain as reserve (as long as allowed by
runtime `IsReserve` filter).

This is very helpful for transferring assets with multiple configured
reserves (such as Asset Hub ForeignAssets), when the transfer strictly
depends on the used reserve.

E.g. For transferring Foreign Assets over a bridge, Asset Hub must be
used as the reserve location.

# Example usage scenarios

## Transfer bridged ethereum ERC20-tokenX between ecosystem parachains.

ERC20-tokenX is registered on AssetHub as a ForeignAsset by the
Polkadot<>Ethereum bridge (Snowbridge). Its asset_id is something like
`(parents:2, (GlobalConsensus(Ethereum), Address(tokenX_contract)))`.
Its _original_ reserve is Ethereum (only we can't use Ethereum as a
reserve in local transfers); but, since tokenX is also registered on
AssetHub as a ForeignAsset, we can use AssetHub as a reserve.

With this PR we can transfer tokenX from ParaA to ParaB while using
AssetHub as a reserve.

## Transfer AssetHub ForeignAssets between parachains

AssetA created on ParaA but also registered as foreign asset on Asset
Hub. Can use AssetHub as a reserve.

And all of the above can be done while still controlling transfer type
for `fees` so mixing assets in same transfer is supported.

# Tests

Added integration tests for showcasing:
- transferring local (not bridged) assets from parachain over bridge
using local Asset Hub reserve,
- transferring foreign assets from parachain to Asset Hub,
- transferring foreign assets from Asset Hub to parachain,
- transferring foreign assets from parachain to parachain using local
Asset Hub reserve.

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: command-bot <>

Fix "double-weights" for extrinsics, use only the ones benchmarked in
the runtime.

Deprecate extrinsics that don't specify WeightLimit, remove their usage
across the repo.

---------

Signed-off-by: Adrian Catangiu <[email protected]>
Co-authored-by: command-bot <>

`execute` and `send` try to decode the xcm in the parameters before
reaching the filter line.
The new extrinsics decode only after the filter line.
These should be used instead of the old ones.

## TODO
- [x] Tests
- [x] Generate weights
- [x] Deprecation issue ->
https://github.com/paritytech/polkadot-sdk/issues/3771
- [x] PRDoc
- [x] Handle error in pallet-contracts

This would make writing XCMs in PJS Apps more difficult, but here's the
fix for that: https://github.com/polkadot-js/apps/pull/10350.
Already deployed! https://polkadot.js.org/apps/#/utilities/xcm

Supersedes https://github.com/paritytech/polkadot-sdk/pull/1798/

---------

Co-authored-by: PG Herveou <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <[email protected]>

The PR provides API for obtaining:
- the weight required to execute an XCM message,
- a list of acceptable `AssetId`s for message execution payment,
- the cost of the weight in the specified acceptable `AssetId`.

It is meant to address an issue where one has to guess how much fee to
pay for execution. Also, at the moment, a client has to guess which
assets are acceptable for fee execution payment.
See the related issue
https://github.com/paritytech/polkadot-sdk/issues/690.
With this API, a client is supposed to query the list of the supported
asset IDs (in the XCM version format the client understands), weigh the
XCM program the client wants to execute and convert the weight into one
of the acceptable assets. Note that the client is supposed to know what
program will be executed on what chains. However, having a small
companion JS library for the pallet-xcm and xtokens should be enough to
determine what XCM programs will be executed and where (since these
pallets compose a known small set of programs).
```Rust
pub trait XcmPaymentApi<Call>
	where
		Call: Codec,
	{
		/// Returns a list of acceptable payment assets.
		///
		/// # Arguments
		///
		/// * `xcm_version`: Version.
		fn query_acceptable_payment_assets(xcm_version: Version) -> Result<Vec<VersionedAssetId>, Error>;
		/// Returns a weight needed to execute a XCM.
		///
		/// # Arguments
		///
		/// * `message`: `VersionedXcm`.
		fn query_xcm_weight(message: VersionedXcm<Call>) -> Result<Weight, Error>;
		/// Converts a weight into a fee for the specified `AssetId`.
		///
		/// # Arguments
		///
		/// * `weight`: convertible `Weight`.
		/// * `asset`: `VersionedAssetId`.
		fn query_weight_to_asset_fee(weight: Weight, asset: VersionedAssetId) -> Result<u128, Error>;
		/// Get delivery fees for sending a specific `message` to a `destination`.
		/// These always come in a specific asset, defined by the chain.
		///
		/// # Arguments
		/// * `message`: The message that'll be sent, necessary because most delivery fees are based on the
		///   size of the message.
		/// * `destination`: The destination to send the message to. Different destinations may use
		///   different senders that charge different fees.
		fn query_delivery_fees(destination: VersionedLocation, message: VersionedXcm<()>) -> Result<VersionedAssets, Error>;
	}
```
An
[example](https://gist.github.com/PraetorP/4bc323ff85401abe253897ba990ec29d)
of a client side code.

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Daniel Shiposha <[email protected]>

Currently `transfer_assets` from pallet-xcm covers 4 main different
transfer types:
- `localReserve`
- `DestinationReserve`
- `Teleport`
- `RemoteReserve`

For the first three, the local execution and the remote message sending
are separated, and fees are deducted in pallet-xcm itself:
https://github.com/paritytech/polkadot-sdk/blob/3410dfb3

/polkadot/xcm/pallet-xcm/src/lib.rs#L1758.

For the 4th case `RemoteReserve`, pallet-xcm is still relying on the
xcm-executor itself to send the message (through the
`initiateReserveWithdraw` instruction). In this case, if delivery fees
need to be charged, it is not possible to do so because the
`jit_withdraw` mode has not being set.

This PR proposes to still use the `initiateReserveWithdraw` but
prepending a `setFeesMode { jit_withdraw: true }` to make sure delivery
fees can be paid.

A test-case is also added to present the aforementioned case

---------

Co-authored-by: Adrian Catangiu <[email protected]>

We do not need to make these traits generic over QueryId type, we can
just use the QueryId alias everywhere

If an XCM execution fails or ends with leftover assets, these will be
trapped.
In order to claim them, a custom XCM has to be executed, with the
`ClaimAsset` instruction.
However, arbitrary XCM execution is not allowed everywhere yet and XCM
itself is still not easy enough to use for users out there with trapped
assets.
This new extrinsic in `pallet-xcm` will allow these users to easily
claim their assets, without concerning themselves with writing arbitrary
XCMs.

Part of fixing https://github.com/paritytech/polkadot-sdk/issues/3495

---------

Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <[email protected]>

## Xcm changes:
- Fix `pallet_xcm::execute`, move the logic into The `ExecuteController`
so it can be shared with anything that implement that trait.
- Make `ExecuteController::execute` retursn `DispatchErrorWithPostInfo`
instead of `DispatchError`, so that we don't charge the full
`max_weight` provided if the execution is incomplete (useful for
force_batch or contracts calls)
- Fix docstring for `pallet_xcm::execute`, to reflect the changes from
#2405
- Update the signature for `ExecuteController::execute`, we don't need
to return the `Outcome` anymore since we only care about
`Outcome::Complete`

## Contracts changes:

- Update host fn `xcm_exexute`, we don't need to write the `Outcome` to
the sandbox memory anymore. This was also not charged as well before so
it if fixes this too.
- One of the issue was that the dry_run of a contract that call
`xcm_execute` would exhaust the `gas_limit`.

This is because `XcmExecuteController::execute` takes a `max_weight`
argument, and since we don't want the user to specify it manually we
were passing everything left by pre-charghing
`ctx.ext.gas_meter().gas_left()`

- To fix it I added a `fn influence_lowest_limit` on the `Token` trait
and make it return false for `RuntimeCost::XcmExecute`.
- Got rid of the `RuntimeToken` indirection, we can just use
`RuntimeCost` directly.

---------

Co-authored-by: command-bot <>

Relates to: https://github.com/paritytech/polkadot-sdk/issues/3214

## TODO

- [ ] backport to the `1.7.0` release

# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <[email protected]>

## Summary

This pull request proposes a solution for improved control of the
versioned XCM flow over the bridge (across different consensus chains)
and resolves the situation where the sending chain/consensus has already
migrated to a higher XCM version than the receiving chain/consensus.

## Problem/Motivation

The current flow over the bridge involves a transfer from AssetHubRococo
(AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to
AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR.

In this process:
1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM
version checks using the `WrapVersion` feature, influenced by
`pallet_xcm::SupportedVersion` (managed by
`pallet_xcm::force_xcm_version` or version discovery).

2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM
version. The `HaulBlobExporter` converts the inner XCM to
[`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467),
also using the latest XCM version.

However, challenges arise:
- Incompatibility when BHW uses a different version than BHR. For
instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**,
BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing
encoding issues for BHW.
  ```
	/// Just a simulation of possible error, which could happen on BHW
	/// (this code is based on actual master without XCMv4)
	let encoded = hex_literal::hex!("0400");
	println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..]));

Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant
doesn't exist" })
  ``` 
- Similar compatibility issues exist between AHR and AHW.

## Solution

This pull request introduces the following solutions:

1. **New trait `CheckVersion`** - added to the `xcm` module and exposing
`pallet_xcm::SupportedVersion`. This enhancement allows checking the
actual XCM version for desired destinations outside of the `pallet_xcm`
module.

2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check
known/configured destination versions, ensuring compatibility. For
example, in the scenario mentioned, BHR can store the version `3` for
BHW. If BHR is on XCMv4, it will attempt to downgrade the message to
version `3` instead of using the latest version `4`.

3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check
ensures compatibility with the real destination's XCM version,
preventing the unnecessary sending of messages to the local bridge hub
if versions are incompatible.

These additions aim to improve the control and compatibility of XCM
flows over the bridge and addressing issues related to version
mismatches.

## Possible alternative solution

_(More investigation is needed, and at the very least, it should extend
to XCMv4/5. If this proves to be a viable option, I can open an RFC for
XCM.)._

Add the `XcmVersion` attribute to the `ExportMessage` so that the
sending chain can determine, based on what is stored in
`pallet_xcm::SupportedVersion`, the version the destination is using.
This way, we may not need to handle the version in `HaulBlobExporter`.

```
ExportMessage {
	network: NetworkId,
	destination: InteriorMultiLocation,
	xcm: Xcm<()>
	destination_xcm_version: Version, // <- new attritbute
},
```

```
pub trait ExportXcm {
        fn validate(
		network: NetworkId,
		channel: u32,
		universal_source: &mut Option<InteriorMultiLocation>,
		destination: &mut Option<InteriorMultiLocation>,
		message: &mut Option<Xcm<()>>,
                destination_xcm_version: Version, , // <- new attritbute
	) -> SendResult<Self::Ticket>;
```

## Future Directions

This PR does not fix version discovery over bridge, further
investigation will be conducted here:
https://github.com/paritytech/polkadot-sdk/issues/2417.

## TODO

- [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` -
change to 3 or lastest?
- [x] fix `pallet-xcm-bridge-hub-router`
- [x] fix HaulBlobExporter with version determination
[here](https://github.com/paritytech/polkadot-sdk/blob/2183669d/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465)
- [x] add unit-tests to the runtimes
- [x] run benchmarks for `ExportMessage`
- [x] extend local run scripts about `force_xcm_version(dest, version)`
- [ ] when merged, prepare governance calls for Rococo/Westend
- [ ] add PRDoc

Part of: https://github.com/paritytech/parity-bridges-common/issues/2719

---------

Co-authored-by: command-bot <>

# Motivation (+testing)

### Enable easy `ForeignAssets` transfers using `pallet-xcm` 

We had just previously added capabilities to teleport fees during
reserve-based transfers, but what about reserve-transferring fees when
needing to teleport some non-fee asset?

This PR aligns everything under either explicit reserve-transfer,
explicit teleport, or this new flexible `transfer_assets()` which can
mix and match as needed with fewer artificial constraints imposed to the
user.

This will enable, for example, a (non-system) parachain to teleport
their `ForeignAssets` assets to AssetHub while using DOT to pay fees.
(the assets are teleported - as foreign assets should from their owner
chain - while DOT used for fees can only be reserve-based transferred
between said parachain and AssetHub).

Added `xcm-emulator` tests for this scenario ^.

# Description

Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based
transfers for all `assets` including fees.

Similarly `(limited_)teleport_assets` only allows teleports for all
`assets` including fees.
    
For complex combinations of asset transfers where assets and fees may
have different reserves or different reserve/teleport trust
configurations, users can use the newly added `transfer_assets()`
extrinsic which is more flexible in allowing more complex scenarios.

`assets` (excluding `fees`) must have same reserve location or otherwise
be teleportable to `dest`.
No limitations imposed on `fees`.

- for local reserve: transfer assets to sovereign account of destination
chain and forward a notification XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`.
- for destination reserve: burn local assets and forward a notification
to `dest` chain to withdraw the reserve assets from this chain's
sovereign account and deposit them to `beneficiary`.
- for remote reserve: burn local assets, forward XCM to reserve chain to
move reserves from this chain's SA to `dest` chain's SA, and forward
another XCM to `dest` to mint and deposit reserve-based assets to
`beneficiary`.
- for teleports: burn local assets and forward XCM to `dest` chain to
mint/teleport assets and deposit them to `beneficiary`.

## Review notes

Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the
rest of the PR is new tests and improving existing tests.

---------

Co-authored-by: command-bot <>

On extrinsics/call, ensure local XCM execution is complete/successful.
Otherwise, fail the extrinsic so that state changes don't get committed
to the db.

Added regression tests that fail without the fix.

fixes #2237

---------

Co-authored-by: Adrian Catangiu <[email protected]>

Disallow reserve transfers that use teleportable fees if `(origin,
fees)` matches `XcmTeleportFilter`.

Add regression tests for filtering based on `XcmTeleportFilter` for both
`(limited_)reserve_transfer_assets()` and `(limited_)teleport_assets`
extrinsics.

## Motivation

`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.

While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.

## Solution

This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.

Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.

All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.

#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).

Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>

We are introducing a new set of `XcmController` traits (final name yet
to be determined).
These traits are implemented by `pallet-xcm` and allows other pallets,
such as `pallet_contracts`, to rely on these traits instead of tight
coupling them to `pallet-xcm`.

Using only the existing Xcm traits would mean duplicating the logic from
`pallet-xcm` in these other pallets, which we aim to avoid. Our
objective is to ensure that when these APIs are called from
`pallet-contracts`, they produce the exact same outcomes as if called
directly from `pallet-xcm`.

The other benefits is that we can also expose return values to
`pallet-contracts` instead of just calling `pallet-xcm` dispatchable and
getting a `DispatchResult` back.

See traits integration in this PR
https://github.com/paritytech/polkadot-sdk/pull/1248, where the traits
are used as follow to define and implement `pallet-contracts` Config.
```rs
// Contracts config:
pub trait Config: frame_system::Config {
  // ...

  /// A type that exposes XCM APIs, allowing contracts to interact with other parachains, and
  /// execute XCM programs.
  type Xcm: xcm_executor::traits::Controller<
	  OriginFor<Self>,
	  <Self as frame_system::Config>::RuntimeCall,
	  BlockNumberFor<Self>,
  >;
}

// implementation
impl pallet_contracts::Config for Runtime {
        // ...

	type Xcm = pallet_xcm::Pallet<Self>;
}
```

---------

Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: command-bot <>

Two old functions should be deprecated and have their code altered in
line with capabilities of XCMv2 and above.

This means we can use the proper `Unlimited` form of weight limit rather
than guessing weight from the local chain.

* restructure dispatch macro related exports

* moved Dispatchable to lib.rs

* fix .gitignore final newline

* ".git/.scripts/commands/fmt/fmt.sh"

* fix rustdocs

* wip

---------

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: ordian <[email protected]>

* Use same rustfmt.toml as Substrate

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* format format file

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Format with new config

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add Substrate Clippy config

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Print Clippy version in CI

Otherwise its difficult to reproduce locally.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Make fmt happy

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update node/core/pvf/src/error.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Update node/core/pvf/src/error.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* move migration stuffs

* Apply suggestions from code review

Co-authored-by: Bastian Köcher <[email protected]>

* Fix test

* fix

* lint

* fix lint

* rm extra space

* fix lint

* PR review

* fixes

* use saturating_accrue in fn

* fix test

---------

Co-authored-by: Bastian Köcher <[email protected]>

This brings the `limited_teleport_assets` weight into line with the
`teleport_assets` weight.

* Add polkadot XCM benchmarks

* Add temp

* ".git/.scripts/commands/bench/bench.sh" xcm polkadot pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm polkadot pallet_xcm_benchmarks::generic

* Add weights to XCM on Polkadot

* Make CI fail on old files

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update template

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add reserve_asset_deposited benchmark

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::generic

* Update weights

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Change initiate_reserve_deposit in runtime weights

* Update weights

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove trusted reserves from runtimes

* Fix pallet-xcm-benchmarks mock

* Fix test

* Change pallet xcm weigher in kusama

* Fix

* Remove merge conflict artifact

* Remove initiate_reserve_withdraw from generic benchmarks

* Add missing implementation to XCM benchmark

* Fix failing karura test

* Remove dbg!

Co-authored-by: Keith Yeung <[email protected]>

* Fix fmt

* Revert "Fix fmt"

This reverts commit 676f2d8db07d7427750c79f95494d4988d06fda5.

* Fix fmt

* Remove duplicated template code

* Add back part of the template

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm polkadot pallet_xcm_benchmarks::fungible

* Don't skip reserve asset deposited benchmark

* Remove call to non-generated benchmark yet

* Underscore unused parameter

* Skip not supported benchmarks and hardcode value

* Remove ReserveAssetDeposited benchmark

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm polkadot pallet_xcm_benchmarks::fungible

* Add back ReserveAssetDeposited

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm polkadot pallet_xcm_benchmarks::fungible

* Use default benchmark for ReserveAssetDeposited

* Add missing parameter

* Revert reserve asset deposited benchmark

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm kusama pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm westend pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::fungible

* Add 'real' benchmarks

* Add TrustedReserve to actual XcmConfig

* Add TrustedReserve to actual XcmConfig (fix)

* Whitelist from benchmarking XCM storage keys read each block (#6871)

* Whitelist from benchmarking XCM storage keys read each block

* ".git/.scripts/commands/bench/bench.sh" runtime polkadot pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime polkadot pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime westend pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime rococo pallet_xcm

* Remove XcmPallet SupportedVersion from the benchmark whitelist

* ".git/.scripts/commands/bench/bench.sh" runtime polkadot pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime kusama pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime westend pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime rococo pallet_xcm

* WIP

* Add necessary traits, remove unnecessary whitelisted keys

* Fix tests

* Remove unused file

* Remove unused import

---------

Co-authored-by: command-bot <>

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm westend pallet_xcm_benchmarks::fungible

* Fix spellchecker issues

* Remove unused migration code

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Keith Yeung <[email protected]>

Moves `Block` to `frame_system` instead of `construct_runtime` and removes `Header` and `BlockNumber` (#7431)

* Companion for substrate

* Minor update

* Formatting

* Fixes for cumulus

* Fixes tests in polkadot-runtime-parachains

* Minor update

* Removes unused import

* Fixes tests in polkadot-runtime-common

* Minor fix

* Update roadmap/implementers-guide/src/runtime/configuration.md

Co-authored-by: ordian <[email protected]>

* ".git/.scripts/commands/fmt/fmt.sh"

* update lockfile for {"substrate"}

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: command-bot <>

* GenesisBuild<T,I> deprecated. BuildGenesisConfig added

* fmt

* fixes

* more fixes

* more fixes

* fixes

* update lockfile for {"substrate"}

* fix

---------

Co-authored-by: parity-processbot <>

* Introduce an extensible location-to-hash-account

* Convert becomes RevFallRefConvert

* Use ConvertLocation trait

* Remove Convert usage

* Builds

* Fix warnings

* Remove unused types

* Bump lock

* No need for aliasing

* Remove unused

* Deprecate legacy conversion

* Fixes

* Fixes

* Update Cargo.toml

Co-authored-by: Muharem Ismailov <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

---------

Co-authored-by: Muharem Ismailov <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

* Move XCM query functionality to trait

* Fix tests

* Add PayOverXcm implementation

* fix the PayOverXcm trait to compile

* moved doc comment out of trait implmeentation and to the trait

* PayOverXCM documentation

* Change documentation a bit

* Added empty benchmark methods implementation and changed docs

* update PayOverXCM to convert AccountIds to MultiLocations

* Implement benchmarking method

* Change v3 to latest

* Descend origin to an asset sender (#6970)

* descend origin to an asset sender

* sender as tuple of dest and sender

* Add more variants to the QueryResponseStatus enum

* Change Beneficiary to Into<[u8; 32]>

* update PayOverXcm to return concrete errors and use AccountId as sender

* use polkadot-primitives for AccountId

* fix dependency to use polkadot-core-primitives

* force Unpaid instruction to the top of the instructions list

* modify report_outcome to accept interior argument

* use new_query directly for building final xcm query, instead of report_outcome

* fix usage of new_query to use the XcmQueryHandler

* fix usage of new_query to use the XcmQueryHandler

* tiny method calling fix

* xcm query handler (#7198)

* drop redundant query status

* rename ReportQueryStatus to OuterQueryStatus

* revert rename of QueryResponseStatus

* update mapping

* Update xcm/xcm-builder/src/pay.rs

Co-authored-by: Gavin Wood <[email protected]>

* Updates

* Docs

* Fix benchmarking stuff

* Destination can be determined based on asset_kind

* Tweaking API to minimise clones

* Some repotting and docs

---------

Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Muharem Ismailov <[email protected]>
Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Gavin Wood <[email protected]>

* pallets: implement Default for GenesisConfig in no_std

This change is follow-up of: https://github.com/paritytech/substrate/pull/14108

It is a step towards: https://github.com/paritytech/substrate/issues/13334

* Cargo.lock updated

* update lockfile for {"substrate"}

---------

Co-authored-by: parity-processbot <>

* Tools for unique topic references

* Formatting

* Naming

* Repot into routing.rs.

* More things done

* Universal Exporter supports topic-as-reference

* Some tests for the topic routing

* More tests

* Paid bridge tests

* Add message ID to sending events

* Formatting

* fix and integrate into test nets

* Move DenyThenTry and friend from Cumulus

* Append SetTopic rather than prepend

* Docs

* Docs

* Work with new ProcessMessage ID API

* Formatting

* Fix build

* Fixes

* Formatting

* Update xcm/xcm-builder/src/barriers.rs

Co-authored-by: Francisco Aguirre <[email protected]>

* Update xcm/xcm-builder/src/routing.rs

Co-authored-by: Francisco Aguirre <[email protected]>

* Docs

* Rename message_hash

* Formatting

* ".git/.scripts/commands/fmt/fmt.sh"

* Rename

* Another Rename

* ".git/.scripts/commands/fmt/fmt.sh"

* ".git/.scripts/commands/fmt/fmt.sh"

* Update xcm/xcm-builder/src/routing.rs

Co-authored-by: Keith Yeung <[email protected]>

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <[email protected]>

* Yeah

* Fix all the migrations for Kusama & Polkadot

---------

Co-authored-by: Liam Aharon <[email protected]>

* Stop weighing XCM execution on pallet-xcm's send extrinsic

* Add missing instruction to transfer extrinsics' weight in pallet-xcm

* xcm remote lock consumers

* update xcm pallet config setups

* fix import

* update xcm pallet config setups

* rename consumers to users

* rename

* rename users to consumers, more docs

* correct doc

---------

Co-authored-by: parity-processbot <>

* Move XCM matcher to xcm-builder

* Use ProcessMessageError as the error type in MatchXcm and ShouldExecute

* Implement a blocking barrier

* Fixes

* Add benchmarking for force_suspension

* ".git/.scripts/commands/bench/bench.sh" runtime westend pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime rococo pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime kusama pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime polkadot pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime westend pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime rococo pallet_xcm

---------

Co-authored-by: command-bot <>

* Properly set the pricing for the DMP router

* Publicize price types

* Use FixedU128 instead of Percent

* Add sp-arithmetic as a dependency for rococo runtime

* Add sp-arithmetic as a dependency to all runtimes

* Remove duplicate import

* Add missing import

* Fix tests

* Create an appropriate QueueDownwardMessageError variant

* Recalculate delivery fee factor based on past queue sizes

* Remove unused error variant

* Fixes

* Fixes

* Remove unused imports

* Rewrite fee factor update mechanism

* Remove unused imports

* Fixes

* Update runtime/parachains/src/dmp.rs

Co-authored-by: Squirrel <[email protected]>

* Make DeliveryFeeFactor be a StorageMap keyed on ParaIds

* Fixes

* introduce limit for fee increase on dmp queue

* add message_size based fee factor to increment_fee_factor

* change message_size fee rate to correct value

* fix div by 0 error

* bind limit to variable

* fix message_size_factor and add DeliveryFeeFactor test

* add test for ExponentialPrice implementation

* make test formula based

* make delivery fee factor test formula based

* add max value test for DeliveryFeeFactor and move limit to config

* change threshold back to dynamic value and fix tests

* fmt

* suggested changes and fmt

* small stylistic change

* fmt

* change to tokenlocation

* small fixes

* fmt

* remove sp_arithmetic dependency

* Update runtime/parachains/src/dmp.rs

Co-authored-by: Kian Paimani <[email protected]>

---------

Co-authored-by: Squirrel <[email protected]>
Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

* Happy New Year!

* Remove year entierly

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Remove years from copyright notice in the entire repo

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Tighter bound on asset types so that weight is cheaper

* cargo fmt

* Ensure for a configurable origin in XCM (#6442), cherry picked from
5ae05e1a957857c449a43d8759a21292d03fd049

Add new associated type, AdminOrigin, bounded by EnsureOrigin trait in
XCM pallet. Replace ensure_root() with ensure_origin() from a
EnsureOrigin trait. Set AdminOrigin as EnsureRoot<AccountId> in xcm
configs.

* cargo fmt

* small stylistic change

---------

Co-authored-by: serkul <[email protected]>

* Remove use of Store trait from runtime directory

* Remove Store trait usage from xcm directory

* Run cargo fmt

* update lockfile for {"substrate"}

---------

Co-authored-by: parity-processbot <>

* Migrate to from_parts

Have a look at https://github.com/ggwpez/substrate-scripts/blob/master/migrate-from-parts.py

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Adapt to master

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* update lockfile for {"substrate"}

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: parity-processbot <>