Part of https://github.com/paritytech/polkadot-sdk/issues/239.

Invariant

1. The number of entries in `Tips` should be equal to `Reasons`.
2. If `OpenTip.finders_fee` is true, then `OpenTip.deposit` should be
greater than zero.
3. Reasons exists for each Tip[`OpenTip.reason`], implying equal length
of storage.

polkadot address: 12zsKEDVcHpKEWb99iFt3xrTCQQXZMu477nJQsTBBrof5k2h

---------

Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

In https://github.com/paritytech/polkadot-sdk/pull/2941 we found out
that the new Wasmi (register) is very effective at optimizing away
certain benchmark bytecode constructs in a way that created an unfair
advantage over Wasmi (stack) which yielded our former benchmarks to be
ineffective at properly measuring the performance impact.

This PR adjusts both affected benchmarks to fix the stated problems.
Affected are
- `instr_i64const` -> `instr_i64add`: Renamed since it now measures the
performance impact of the Wasm `i64.add` instruction with locals as
inputs and outputs. This makes it impossible for Wasmi (register) to
aggressively optimize away the entire function body (as it previously
did) but still provides a way for Wasmi (register) to shine with its
register based execution model.
- `call_with_code_per_byte`: Now uses `local.get` instead of `i32.const`
for the `if` condition which prevents Wasmi (register) to aggressively
optimizing away whole parts of the `if` creating an unfair advantage.

cc @athei



---------

Co-authored-by: command-bot <>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: Ignacio Palacios <[email protected]>

Using just `nightly` is too generic and can fail on different systems.  
Now its fixed to the nightly version of the CI.

Another way would be to use a toolchain file, since this already assumes
`rustup`.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

Closes #1323 

cc @xlc

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

A bonded ledger fetched with the `StakingLedger` implementation exposes
a method `ledger.controller()` that returns the controller of the
ledger. However, that controller is computed and stored under the
`ledger.controller` field on the fly - i.e when the ledger is fetched
from storage using the `StakingLedger::get` method. The controller field
is never stored in storage.

This PR add a few more tests checks and improves the ledger try-state
checks to make sure these invariants hold true.

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

In case `CARGO_TARGET_DIR` is set, build artifacts were in the wrong
place and `build.rs` was failing. With
`CARGO_TARGET_DIR=/home/nazar-pc/.cache/cargo/target`:
```
error: failed to run custom build command for `pallet-contracts-fixtures v1.0.0 (/web/subspace/polkadot-sdk/substrate/frame/contracts/fixtures)`

Caused by:
  process didn't exit successfully: `/home/nazar-pc/.cache/cargo/target/debug/build/pallet-contracts-fixtures-35d534f7ac3009e0/build-script-build` (exit status: 1)
  --- stderr
  Error: Failed to read "/tmp/.tmpiYwXfv/target/wasm32-unknown-unknown/release/dummy.wasm"

  Caused by:
      Can't read from the file: Os { code: 2, kind: NotFound, message: "No such file or directory" }
```

The file was actually in
`/home/nazar-pc/.cache/cargo/target/wasm32-unknown-unknown/release/dummy.wasm`.

As demanded by @athei to run benchmarks via CI.
Somehow I was not able to push a PR without commits.

---------

Co-authored-by: command-bot <>

Apparently they changed detection for visibility identifiers on traits,
which broke more than it should. There is an issue open:
https://github.com/rust-lang/rust/issues/119924 The easy solution for us
is to move the declaration of the global variable outside of the trait.

Closes: https://github.com/paritytech/polkadot-sdk/issues/2960

Bumps the known_good_semver group with 1 update:
[clap](https://github.com/clap-rs/clap).

Updates `clap` from 4.4.16 to 4.4.18
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.18</h2>
<h2>[4.4.18] - 2024-01-16</h2>
<h3>Fixes</h3>
<ul>
<li><em>(error)</em> When lacking <code>usage</code> feature, ensure the
list of required arguments is unique</li>
</ul>
<h2>v4.4.17</h2>
<h2>[4.4.17] - 2024-01-15</h2>
<h3>Fixes</h3>
<ul>
<li>Fix <code>panic!</code> when mixing
<code>args_conflicts_with_subcommands</code> with <code>ArgGroup</code>
(which is implicit with <code>derive</code>) introduced in 4.4.15</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.18] - 2024-01-16</h2>
<h3>Fixes</h3>
<ul>
<li><em>(error)</em> When lacking <code>usage</code> feature, ensure the
list of required arguments is unique</li>
</ul>
<h2>[4.4.17] - 2024-01-15</h2>
<h3>Fixes</h3>
<ul>
<li>Fix <code>panic!</code> when mixing
<code>args_conflicts_with_subcommands</code> with <code>ArgGroup</code>
(which is implicit with <code>derive</code>) introduced in 4.4.15</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/0134f45ff0e2e2be8c451565e4fbf5d3cb7b7cfd"><code>0134f45</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/995ee032779d802606e599caf4f498ea51e92e82"><code>995ee03</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2f1890907ed4e78674feeb96df34cfb813b84686"><code>2f18909</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5314">#5314</a>
from epage/required</li>
<li><a
href="https://github.com/clap-rs/clap/commit/0a635b9a20077e2f932a9baee527052d8ed45d9e"><code>0a635b9</code></a>
fix(parser): Don't duplicate requireds when usage disabled</li>
<li><a
href="https://github.com/clap-rs/clap/commit/e648e086f3934afb40b121b5999b9e23657ddc28"><code>e648e08</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5311">#5311</a>
from sourcefrog/doc-exitcode</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8c83971b8c356b8c9abfbbb2320cb946a2ee8139"><code>8c83971</code></a>
docs: Link to exit code info</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b250c0b5f5920b59e551bf0ec90e17c6103ae4a2"><code>b250c0b</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5310">#5310</a>
from epage/pty</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c742b8eb0ca648b645b616e064e00408944f390e"><code>c742b8e</code></a>
chore(complete): Update completest-pty</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f524d84c1d3eca1c980c5150c750d9e00cbbdb0c"><code>f524d84</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/944fb81cf593af1cd3a58dd959c934f0ff483182"><code>944fb81</code></a>
docs: Update changelog</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.16...v4.4.18">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.16&new-version=4.4.18)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

Backport of https://github.com/paritytech/polkadot-sdk/pull/1863 to
master

Extend candidate sanitation in paras_inherent by removing backing votes
from disabled validators. Check
https://github.com/paritytech/polkadot-sdk/issues/1592 for more details.

This change is related to the disabling strategy implementation
(https://github.com/paritytech/polkadot-sdk/pull/2226).

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Maciej <[email protected]>

Order:

- [x] Start People Chain
- [RPC
node](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Frococo-people-rpc.polkadot.io#/explorer)
- [x] Upgrade Rococo Relay (`EnsureRoot` -> `EnsureSigned`) (v1,006,002)
- Done
[here](https://rococo.subscan.io/extrinsic/0xef07e0f9dbb2b9e829305f132e6ce45d291239286e409177e20895e6687daa6c)
- [x] Migrate all identities
- Done, see extrinsics from [this
account](https://rococo.subscan.io/account/5FyNYrBwndvBttTkGUqGGCRAXtBH4Mh8xELDaxaFywTsjDKb)
- [x] Upgrade Rococo People (remove call filter) (v1,006,002)
- Authorized
[here](https://rococo.subscan.io/extrinsic/0xedf6a80229bd411b7ed8d3a489a767b0f773bed5c49239987a294c293a35b98b)

With added:

- [x] Upgrade Rococo People to fix `poke_deposit` bug (v1,006,001)
- Authorized
[here](https://rococo.subscan.io/extrinsic/0xd1dc3cd6e8274bd0196f8d9f13ed09f6e9c76e6a40f9786a1629f4cb22cf948d)

Note:

It's also possible to remove the Identity Migrator pallet from both the
Relay Chain and the parachain at this time. I will leave them in for now
to preserve the test cases until we run them on Kusama/Polkadot. We will
also want a follow up to remove all Identity-related state from the
Relay Chain.

This will allow us to change to the target supporting atomics and makes
the linker file no longer necessary.

Reverts paritytech/polkadot-sdk#2883

Code, not docs, was intended.

# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <[email protected]>

To resolve issue #1136.

This is a cross verification against zepter.

- [cargo-featalign](https://github.com/hack-ink/cargo-featalign):
Verifies the proper propagation of all features.
- [zepter](https://github.com/ggwpez/zepter): Checks for accidentally
enabled features.

cc @ggwpez

 

---
Switch to a new branch. Original PR #1537.

---------

Signed-off-by: Xavier Lau <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Chevdor <[email protected]>

- Do not disable `std` feature in the integration tests
- `contracts-fixtures` test should only check for `riscv` build when the
feature is enabled

Integration tests in ink!:
https://github.com/paritytech/ink/tree/master/integration-tests/sr25519-verification

Bumps the known_good_semver group with 1 update:
[clap](https://github.com/clap-rs/clap).

Updates `clap` from 4.4.14 to 4.4.16
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.16</h2>
<h2>[4.4.16] - 2024-01-12</h2>
<h3>Fixes</h3>
<ul>
<li>Ensure invalid escape sequences in user-defined strings are
correctly stripped when terminal doesn't support color</li>
</ul>
<h2>v4.4.15</h2>
<h2>[4.4.15] - 2024-01-11</h2>
<h3>Fixes</h3>
<ul>
<li>Improve error for <code>args_conflicts_with_subcommands</code></li>
<li>Ensure we error for <code>args_conflicts_with_subcommands</code>
when using subcommand short and long flags</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.16] - 2024-01-12</h2>
<h3>Fixes</h3>
<ul>
<li>Ensure invalid escape sequences in user-defined strings are
correctly stripped when terminal doesn't support color</li>
</ul>
<h2>[4.4.15] - 2024-01-11</h2>
<h3>Fixes</h3>
<ul>
<li>Improve error for <code>args_conflicts_with_subcommands</code></li>
<li>Ensure we error for <code>args_conflicts_with_subcommands</code>
when using subcommand short and long flags</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/cbc9c9dd44fc4be25c196213d508b9d2a9c282f3"><code>cbc9c9d</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/4718b89486c7c4236a18411b8449afc2d93f8e3d"><code>4718b89</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/38f805cea0cf50a0f26ed01e4fdf550ca8a555fa"><code>38f805c</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5299">#5299</a>
from epage/ansi</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2a3356a53543531726e851e97639810f3828a89b"><code>2a3356a</code></a>
fix: Update anstream</li>
<li><a
href="https://github.com/clap-rs/clap/commit/12b5c39d467ea147c21f5eb3063fc0bc2538e9b7"><code>12b5c39</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/1c5b63390babdb4f3a8994436da4e7f9239b7d43"><code>1c5b633</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a5d46410e072b9821f76b21839849c4434a2f8da"><code>a5d4641</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5298">#5298</a>
from epage/conflict</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f529ec398c4262296d5e6eb063b1b52d875d7f03"><code>f529ec3</code></a>
fix(parser): Ensure subcommand flags can conflict</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a7e04a53e4a9e310663a0cdb5bfb0753d84b82bd"><code>a7e04a5</code></a>
fix(parser): Improve subcommand conflict error</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ea00ef3051fd5a993b766062a4e9defc777bf233"><code>ea00ef3</code></a>
refactor(error): Allow more conflict sources</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.14...v4.4.16">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.14&new-version=4.4.16)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Original PR https://github.com/paritytech/substrate/pull/14655

---

Partial https://github.com/paritytech/polkadot-sdk/issues/225

- [x] Adds conformance tests for Unbalanced
- [x] Adds conformance tests for Balanced
- Several minor fixes to fungible default implementations and the
Balances pallet
- [x] `Unbalanced::decrease_balance` can reap account when
`Preservation` is `Preserve`
- [x] `Balanced::pair` can return pairs of imbalances which do not
cancel each other out
   - [x] Balances pallet `active_issuance` 'underflow'
- [x] Refactors the conformance test file structure to match the
fungible file structure: tests for traits in regular.rs go into a test
file named regular.rs, tests for traits in freezes.rs go into a test
file named freezes.rs, etc.
 - [x] Improve doc comments
 - [x] Simplify macros

## Fixes

### `Unbalanced::decrease_balance` can reap account when called with
`Preservation::Preserve`
There is a potential issue in the default implementation of
`Unbalanced::decrease_balance`. The implementation can delete an account
even when it is called with `preservation: Preservation::Preserve`. This
seems to contradict the documentation of `Preservation::Preserve`:

```rust
	/// The account may not be killed and our provider reference must remain (in the context of
	/// tokens, this means that the account may not be dusted).
	Preserve,
```

I updated `Unbalanced::decrease_balance` to return
`Err(TokenError::BelowMinimum)` when a withdrawal would cause the
account to be reaped and `preservation: Preservation::Preserve`.

- [ ] TODO Confirm with @gavofyork that this is correct behavior

Test for this behavior:


https://github.com/paritytech/polkadot-sdk/blob/e5c876dd/substrate/frame/support/src/traits/tokens/fungible/conformance_tests/regular.rs#L912-L937

### `Balanced::pair` returning non-canceling pairs

`Balanced::pair` is supposed to create a pair of imbalances that cancel
each other out. However this is not the case when the method is called
with an amount greater than the total supply.

In the existing default implementation, `Balanced::pair` creates a pair
by first rescinding the balance, creating `Debt`, and then issuing the
balance, creating `Credit`.

When creating `Debt`, if the amount to create exceeds the
`total_supply`, `total_supply` units of `Debt` are created *instead* of
`amount` units of `Debt`. This can lead to non-canceling amount of
`Credit` and `Debt` being created.

To address this, I create the credit and debt directly in the method
instead of calling `issue` and `rescind`.

Test for this behavior:


https://github.com/paritytech/polkadot-sdk/blob/e5c876dd/substrate/frame/support/src/traits/tokens/fungible/conformance_tests/regular.rs#L1323-L1346

### `Balances` pallet `active_issuance` 'underflow'

This PR resolves an issue in the `Balances` pallet that can lead to odd
behavior of `active_issuance`.

Currently, the Balances pallet doesn't check if `InactiveIssuance`
remains less than or equal to `TotalIssuance` when supply is
deactivated. This allows `InactiveIssuance` to be greater than
`TotalIssuance`, which can result in unexpected behavior from the
perspective of the fungible API.

`active_issuance` is derived from
`TotalIssuance.saturating_sub(InactiveIssuance)`.

If an `amount` is deactivated that causes `InactiveIssuance` to become
greater TotalIssuance, `active_issuance` will return 0. However once in
that state, reactivating an amount will not increase `active_issuance`
by the reactivated `amount` as expected.

Consider this test where the last assertion would fail due to this
issue:


https://github.com/paritytech/polkadot-sdk/blob/e5c876dd

/substrate/frame/support/src/traits/tokens/fungible/conformance_tests/regular.rs#L1036-L1071

To address this, I've modified the `deactivate` function to ensure
`InactiveIssuance` never surpasses `TotalIssuance`.

---------

Co-authored-by: Muharem <[email protected]>

aquamarine v0.4.0 has yanked, see
https://crates.io/crates/aquamarine/0.4.0

- Translate all pallet-contracts fixtures from `wat` to Rust files.
- Fix read_sandbox_memory_as to not use MaxEncodedLen as this could
break if used with types with a non-fixed encoded len.

---------

Co-authored-by: alvicsam <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: command-bot <>

`frame-support` crate compilation fails (reported by @koute):

```
$ cargo check --no-default-features --target=wasm32-unknown-unknown

error[E0277]: the trait bound `GC: Serialize` is not satisfied
    --> substrate/frame/support/src/genesis_builder_helper.rs:32:24
     |
32   |     serde_json::to_string(&GC::default())
     |     --------------------- ^^^^^^^^^^^^^^ the trait `Serialize` is not implemented for `GC`
     |     |
     |     required by a bound introduced by this call
     |
note: required by a bound in `serde_json::to_string`
    --> /home/kou/.cargo/registry/src/index.crates.io-6f17d22bba15001f/serde_json-1.0.111/src/ser.rs:2209:17
     |
2207 | pub fn to_string<T>(value: &T) -> Result<String>
     |        --------- required by a bound in this function
2208 | where
2209 |     T: ?Sized + Serialize,
     |                 ^^^^^^^^^ required by this bound in `to_string`
help: consider further restricting this bound
     |
30   |     GC: BuildGenesisConfig + Default + serde::Serialize,
     |                                      ++++++++++++++++++
```

This PR should fix this.

For all runtimes `sp-runtime/serde` feature was likely enabled by this
(and few other pallets):

https://github.com/paritytech/polkadot-sdk/blob/f2a750ee/substrate/frame/system/Cargo.toml#L27

Bumps [trybuild](https://github.com/dtolnay/trybuild) from 1.0.83 to
1.0.88.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/trybuild/releases">trybuild's
releases</a>.</em></p>
<blockquote>
<h2>1.0.88</h2>
<ul>
<li>Work around <code>dead_code</code> warning false positive (<a
href="https://redirect.github.com/dtolnay/trybuild/issues/253">#253</a>)</li>
</ul>
<h2>1.0.87</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
<h2>1.0.86</h2>
<ul>
<li>Support edition 2024 (<a
href="https://redirect.github.com/dtolnay/trybuild/issues/250">#250</a>,
<a
href="https://redirect.github.com/dtolnay/trybuild/issues/252">#252</a>,
thanks <a
href="https://github.com/mohe2015"><code>@​mohe2015</code></a>)</li>
</ul>
<h2>1.0.85</h2>
<ul>
<li>Set thread name to produce better message on panic (<a
href="https://redirect.github.com/dtolnay/trybuild/issues/243">#243</a>,
<a
href="https://redirect.github.com/dtolnay/trybuild/issues/244">#244</a>)</li>
</ul>
<h2>1.0.84</h2>
<ul>
<li>Stabilize usage of Cargo's <code>--keep-going</code> build mode,
which parallelizes test compilation for a significant speedup (<a
href="https://redirect.github.com/rust-lang/cargo/pull/12568">rust-lang/cargo#12568</a>,
<a
href="https://redirect.github.com/dtolnay/trybuild/issues/240">#240</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/trybuild/commit/52caff6811ac288418209c7c7e2da28583bb1f4d"><code>52caff6</code></a>
Release 1.0.88</li>
<li><a
href="https://github.com/dtolnay/trybuild/commit/0321a01898a69905a74c3aab2519219939f133fa"><code>0321a01</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/trybuild/issues/253">#253</a>
from dtolnay/deadflock</li>
<li><a
href="https://github.com/dtolnay/trybuild/commit/b720ee6e5cd44ab7d8ab140a020006e0db6270a4"><code>b720ee6</code></a>
Work around dead_code warning in flock implementation</li>
<li><a
href="https://github.com/dtolnay/trybuild/commit/0081291b6bb5d19b92d19f1fc9c1d32ed539a129"><code>0081291</code></a>
Release 1.0.87</li>
<li><a
href="https://github.com/dtolnay/trybuild/commit/e0c4c0d7c8581d46366668eee28dbf6ec790178b"><code>e0c4c0d</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/dtolnay/trybuild/commit/a6cbfe8b08978660b92259d1f6642c2812e9ffe7"><code>a6cbfe8</code></a>
Release 1.0.86</li>
<li><a
href="https://github.com/dtolnay/trybuild/commit/7c5a8fef4e4f4e85bec2dd888434c310ec479f21"><code>7c5a8fe</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/trybuild/issues/252">#252</a>
from dtolnay/cargofeatures</li>
<li><a
href="https://github.com/dtolnay/trybuild/commit/d3cd15bf3081ddbd4720984001e3f2a09f53d621"><code>d3cd15b</code></a>
Propagate cargo features from source manifest</li>
<li><a
href="https://github.com/dtolnay/trybuild/commit/c28428dcb57a735c16b25745298f045ffb5782bb"><code>c28428d</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/trybuild/issues/251">#251</a>
from dtolnay/skipcargofeatures</li>
<li><a
href="https://github.com/dtolnay/trybuild/commit/3e4029ede75d98b9164136852689a7ca5602108e"><code>3e4029e</code></a>
Omit cargo-features from generated Cargo.toml if empty</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/trybuild/compare/1.0.83...1.0.88">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=trybuild&package-manager=cargo&previous-version=1.0.83&new-version=1.0.88)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

This PR allows _username authorities_ to issue unique usernames that
correspond with an account. It also provides two-way lookup, that is
from `AccountId` to a single, "primary" `Username` (alongside
`Registration`) and multiple unique `Username`s to an `AccountId`.

Key features:

- Username Authorities added (and removed) via privileged origin.
- Authorities have a `suffix` and an `allocation`. They can grant up to
`allocation` usernames. Their `suffix` will be appended to the usernames
that they issue. A suffix may be up to 7 characters long.
- Users can ask an authority to grant them a username. This will take
the form `myusername.suffix`. The entire name (including suffix) must be
less than or equal to 32 alphanumeric characters.
- Users can approve a username for themselves in one of two ways (that
is, authorities cannot grant them arbitrarily):
- Pre-sign the entire username (including suffix) with a secret key that
corresponds to their `AccountId` (for keyed accounts, obviously); or
- Accept the username after it has been granted by an authority (it will
be queued until accepted) (for non-keyed accounts like pure proxies or
multisigs).
- The system does not require any funds or deposits. Users without an
identity will be given a default one (presumably all fields set to
`None`). If they update this info, they will need to place the normal
storage deposit.
- If a user does not have any username, their first one will be set as
`Primary`, and their `AccountId` will map to that one. If they get
subsequent usernames, they can choose which one to be their primary via
`set_primary_username`.
- There are some state cleanup functions to remove expired usernames
that have not been accepted and dangling usernames whose owners have
called `clear_identity`.

TODO:

- [x] Add migration to runtimes
- [x] Probably do off-chain migration into People Chain genesis
- [x] Address a few TODO questions in code (please review)

---------

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

Bumps
[lycheeverse/lychee-action](https://github.com/lycheeverse/lychee-action)
from 2ac9f030ccdea0033e2510a23a67da2a2da98492 to
fdea7032675810093199f485fe075f057cc37b3e.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/lycheeverse/lychee-action/commit/fdea7032675810093199f485fe075f057cc37b3e"><code>fdea703</code></a>
Update secure git hash for 1.9.0</li>
<li><a
href="https://github.com/lycheeverse/lychee-action/commit/22134d37a1fff6c2974df9c92a7c7e1e86a08f9c"><code>22134d3</code></a>
Bump version to 1.9.0</li>
<li><a
href="https://github.com/lycheeverse/lychee-action/commit/ebd95ebde89b46eaf3567432efb0b52bad2187d7"><code>ebd95eb</code></a>
Update to latest lychee 0.14.0</li>
<li><a
href="https://github.com/lycheeverse/lychee-action/commit/37d79d3b6eda9990480a57eed21c847792dec37a"><code>37d79d3</code></a>
Add integration tests for absolute output path and <code>--dump</code>
(<a
href="https://redirect.github.com/lycheeverse/lychee-action/issues/218">#218</a>)</li>
<li><a
href="https://github.com/lycheeverse/lychee-action/commit/57219e4f1d23b32484889db3dbd73f6b814c9bfa"><code>57219e4</code></a>
Add integration test for custom output paths (<a
href="https://redirect.github.com/lycheeverse/lychee-action/issues/1309">#1309</a>)
(<a
href="https://redirect.github.com/lycheeverse/lychee-action/issues/217">#217</a>)</li>
<li><a
href="https://github.com/lycheeverse/lychee-action/commit/a4282891d5805c0d9df0c0d524e2e95a3b0d1ac5"><code>a428289</code></a>
fix: cleanup if statement (<a
href="https://redirect.github.com/lycheeverse/lychee-action/issues/215">#215</a>)</li>
<li><a
href="https://github.com/lycheeverse/lychee-action/commit/ef8c8f32c278e9eed290c6e6c96748f16b6cd335"><code>ef8c8f3</code></a>
Add documentation on using the <code>--base</code> param when testing
local files (<a
href="https://redirect.github.com/lycheeverse/lychee-action/issues/211">#211</a>)</li>
<li>See full diff in <a
href="https://github.com/lycheeverse/lychee-action/compare/2ac9f030ccdea0033e2510a23a67da2a2da98492...fdea7032675810093199f485fe075f057cc37b3e">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

---------

Signed-off-by: dependabot[bot] <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: PG Herveou <[email protected]>

Bumps [aquamarine](https://github.com/mersinvald/aquamarine) from 0.3.2
to 0.4.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/mersinvald/aquamarine/releases">aquamarine's
releases</a>.</em></p>
<blockquote>
<h2>0.4.0</h2>
<h2>Breaking Changes</h2>
<ul>
<li><code>path</code> attribute is no longer supported for importing
diagrams from external files</li>
</ul>
<h2>Features</h2>
<ul>
<li><code>include_mmd!</code> macro-like syntax for embedding diagrams
from files</li>
<li>multiple diagrams can now be imported from filesystem per documented
entity</li>
<li>imported diagrams can now be placed freely at any place inside the
doc comment</li>
</ul>
<h2>Miscellaneous</h2>
<ul>
<li>syn bumped to version 2 (PR <a
href="https://redirect.github.com/mersinvald/aquamarine/issues/42">#42</a>
by <a href="https://github.com/maurer">maurer</a>)</li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/mersinvald/aquamarine/compare/v0.3.2...v0.4.0">https://github.com/mersinvald/aquamarine/compare/v0.3.2...v0.4.0</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/mersinvald/aquamarine/blob/master/CHANGELOG.md">aquamarine's
changelog</a>.</em></p>
<blockquote>
<h3>v0.4.0 (2023-12-13)</h3>
<h4>Breaking Changes</h4>
<ul>
<li><code>path</code> attribute is no longer supported for importing
diagrams from external files</li>
</ul>
<h4>Features</h4>
<ul>
<li><code>include_mmd!</code> macro-like syntax for embedding diagrams
from files</li>
<li>multiple diagrams can now be imported from filesystem per documented
entity</li>
<li>imported diagrams can now be placed freely at any place inside the
doc comment</li>
</ul>
<h4>Miscellaneous</h4>
<ul>
<li>syn bumped to version 2 (PR <a
href="https://redirect.github.com/mersinvald/aquamarine/issues/42">#42</a>
by <a href="https://github.com/maurer">maurer</a></li>
</ul>
<p><!-- raw HTML omitted --><!-- raw HTML omitted --></p>
<h3>v0.3.1 (2023-04-17)</h3>
<h4>Features</h4>
<ul>
<li>mermaid is updated to v10 (PR <a
href="https://redirect.github.com/mersinvald/aquamarine/issues/46">#46</a>
by <a href="https://github.com/frehberg">frehberg</a>)</li>
<li>better handling of a failure to load mermaidjs (PR <a
href="https://redirect.github.com/mersinvald/aquamarine/issues/46">#46</a>
by <a href="https://github.com/frehberg">frehberg</a>)</li>
</ul>
<h4>Miscellaneous</h4>
<ul>
<li>add Frehberg as a maintainer on GitHub, and package owner on
Crates.io</li>
</ul>
<p><!-- raw HTML omitted --><!-- raw HTML omitted --></p>
<h3>v0.3.0 (2023-02-16)</h3>
<h4>Maintenance</h4>
<ul>
<li>update dependencies</li>
</ul>
<p><!-- raw HTML omitted --><!-- raw HTML omitted --></p>
<h3>v0.2.2 (2023-02-02)</h3>
<h4>Bug Fixes</h4>
<ul>
<li>gracefully handle failure to write mermaid.js files (<a
href="https://github.com/mersinvald/aquamarine/blob/master/514c67c9">https://github.com/mersinvald/aquamarine/blob/master/514c67c9</a>)</li>
</ul>
<p><!-- raw HTML omitted --><!-- raw HTML omitted --></p>
<h3>v0.2.1 (2023-02-01)</h3>
<h4>Maintenance</h4>
<ul>
<li>MermaidJS updated to version 9.3.0</li>
</ul>
<p><!-- raw HTML omitted --><!-- raw HTML omitted --></p>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/mersinvald/aquamarine/commit/480897b2e8572530a2d09c0a6ed556dbc989bfa2"><code>480897b</code></a>
chore: version 0.4.0</li>
<li><a
href="https://github.com/mersinvald/aquamarine/commit/f78120db7780b678b0ce1f29fbf663db277e378e"><code>f78120d</code></a>
feat: multiple fs imports, free placement of imported diagrams</li>
<li><a
href="https://github.com/mersinvald/aquamarine/commit/4cd047c991e9289c12a0725363cda0f7d2df10d7"><code>4cd047c</code></a>
chore: less strict syn2 semver</li>
<li><a
href="https://github.com/mersinvald/aquamarine/commit/1a092e51e80522fd00ef9655e9a6fd9039f2aa90"><code>1a092e5</code></a>
Merge pull request <a
href="https://redirect.github.com/mersinvald/aquamarine/issues/42">#42</a>
from maurer/syn-2-update</li>
<li><a
href="https://github.com/mersinvald/aquamarine/commit/525a00a8396cb3c925e66657c3721afbe4797a6b"><code>525a00a</code></a>
chore: fix demo crate dependencies</li>
<li><a
href="https://github.com/mersinvald/aquamarine/commit/50a0b238ea4a08aa6bb0ddbe4cc774e409e9a188"><code>50a0b23</code></a>
chore: fix demo crate links</li>
<li><a
href="https://github.com/mersinvald/aquamarine/commit/e3211bb9c345e2cf9a2c2555f6f5d2c4b4166fd5"><code>e3211bb</code></a>
hotfix: malformed string literals in mermaid.js diagrams of a demo
crate</li>
<li><a
href="https://github.com/mersinvald/aquamarine/commit/c135a84214c4c6571ee781f3a09d8258b276adf4"><code>c135a84</code></a>
Update to syn-2</li>
<li>See full diff in <a
href="https://github.com/mersinvald/aquamarine/compare/v0.3.2...v0.4.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=aquamarine&package-manager=cargo&previous-version=0.3.2&new-version=0.4.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps the known_good_semver group with 1 update:
[clap](https://github.com/clap-rs/clap).

Updates `clap` from 4.4.13 to 4.4.14
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.14</h2>
<h2>[4.4.14] - 2024-01-08</h2>
<h3>Documentation</h3>
<ul>
<li>Fix <code>find</code> cookbook entry to allow repeats of
flags/options</li>
</ul>
<h3>Features</h3>
<ul>
<li>Allow <code>num_args(0)</code> on options which allows making them
emulate being a flag for position-tracking flags</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.14] - 2024-01-08</h2>
<h3>Documentation</h3>
<ul>
<li>Fix <code>find</code> cookbook entry to allow repeats of
flags/options</li>
</ul>
<h3>Features</h3>
<ul>
<li>Allow <code>num_args(0)</code> on options which allows making them
emulate being a flag for position-tracking flags</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/514f28bc92ed683d53292cbe9457db3ec5df7b6f"><code>514f28b</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/1440456d3ddaa6d9624297d83de9bb9abe82f10b"><code>1440456</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/d6479ff7ddbcf524146428c92be23273b4f8bac5"><code>d6479ff</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5290">#5290</a>
from epage/or</li>
<li><a
href="https://github.com/clap-rs/clap/commit/02f82146ad746ce9d1874e38ec7033150bb12622"><code>02f8214</code></a>
docs(cookbook): Clarify intent of fake flags</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c603f34574832b8894b44e0f67fd19dc7869e808"><code>c603f34</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5275">#5275</a>
from epage/ci</li>
<li><a
href="https://github.com/clap-rs/clap/commit/641b42b2e82086775619bd15854ddb5b80311b49"><code>641b42b</code></a>
chore(ci): Speed up critical path of CI</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3eaf1af052bd5255cc2440dc1cc8f80831a3428b"><code>3eaf1af</code></a>
fix(help): Correctly show help for fake flags</li>
<li><a
href="https://github.com/clap-rs/clap/commit/d63106b9f698df0d2241662ab1459c823890dec4"><code>d63106b</code></a>
docs(cookbook): Allow repeated operators</li>
<li><a
href="https://github.com/clap-rs/clap/commit/148e102ac37bd0e5ca99cfe9c5d57ffc6243cf66"><code>148e102</code></a>
fix(builder): Allow custom flag definitions</li>
<li><a
href="https://github.com/clap-rs/clap/commit/d53d881e339fec64e48990170b542fae4140eaaa"><code>d53d881</code></a>
docs(cookbook): Demonstrate bad 'find' behavior</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.13...v4.4.14">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.13&new-version=4.4.14)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

bump polkavm-x deps to 0.4.0

To align with the documentation of the approve call, we import an
unimported member on approval.

No changes have been made to the benchmarks as they already cover the
worst-case scenario.

This prevents it leaking `std` into `no_std` builds.

Closes: https://github.com/paritytech/polkadot-sdk/issues/2866

- Keep feature name short s/riscv-experimental/riscv
- Add to feature to CI build

---------

Co-authored-by: Bastian Köcher <[email protected]>

The [chainSpec RPC API from the v2
spec](https://paritytech.github.io/json-rpc-interface-spec/api/chainSpec.html)
was only added to substrate-node and should be added to polkadot as well

/cc @lexnv

Bumps [proc-macro-crate](https://github.com/bkchr/proc-macro-crate) from
2.0.1 to 3.0.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/bkchr/proc-macro-crate/releases">proc-macro-crate's
releases</a>.</em></p>
<blockquote>
<h2>v3.0.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Release 3.0.0 by <a
href="https://github.com/bkchr"><code>@​bkchr</code></a> in <a
href="https://redirect.github.com/bkchr/proc-macro-crate/pull/47">bkchr/proc-macro-crate#47</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/bkchr/proc-macro-crate/compare/v2.0.1...v3.0.0">https://github.com/bkchr/proc-macro-crate/compare/v2.0.1...v3.0.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/bkchr/proc-macro-crate/commit/c9671b5f8c307c50aab61e2352450a620d236d8b"><code>c9671b5</code></a>
Merge pull request <a
href="https://redirect.github.com/bkchr/proc-macro-crate/issues/47">#47</a>
from bkchr/bkchrr-release-3.0.0</li>
<li><a
href="https://github.com/bkchr/proc-macro-crate/commit/e1a5af33e5a573c878441e38ec991fa23a1b4065"><code>e1a5af3</code></a>
Bump Rust CI version</li>
<li><a
href="https://github.com/bkchr/proc-macro-crate/commit/71c28e2a2592a9dc85afbdb4bc346a0296999eed"><code>71c28e2</code></a>
Release 3.0.0</li>
<li>See full diff in <a
href="https://github.com/bkchr/proc-macro-crate/compare/v2.0.1...v3.0.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=proc-macro-crate&package-manager=cargo&previous-version=2.0.1&new-version=3.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

This disables building the RISCV fixtures by default. They still require
a custom build rustc version. When there are actual tests for RISCV, the
feature can be enabled in CI. Also fixes some unwraps that assume again
that people are using rustup...

Bumps the known_good_semver group with 4 updates:
[serde](https://github.com/serde-rs/serde),
[serde_json](https://github.com/serde-rs/json),
[clap](https://github.com/clap-rs/clap) and
[syn](https://github.com/dtolnay/syn).

Updates `serde` from 1.0.194 to 1.0.195
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.195</h2>
<ul>
<li>Prevent remote definitions of tuple struct or tuple variant from
triggering dead_code warning (<a
href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a>
Release 1.0.195</li>
<li><a
href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>
from dtolnay/deadremote</li>
<li><a
href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a>
Revert &quot;Add FIXME to fix dead_code warning when using
serde(remote)&quot;</li>
<li><a
href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a>
Fix new dead_code warning in tuple struct and tuple variant remote
defs</li>
<li><a
href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a>
Add FIXME to fix dead_code warning when using serde(remote)</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a>
Work around dead_code warning in tests</li>
<li><a
href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a>
from serde-rs/exhaustive</li>
<li><a
href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a>
Fill in omitted patterns for GenericArguments match</li>
<li><a
href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a>
Pick up changes to non_exhaustive_omitted_patterns lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.110 to 1.0.111
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.111</h2>
<ul>
<li>Improve floating point parsing performance on loongarch64 (<a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>,
thanks <a
href="https://github.com/heiher"><code>@​heiher</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a>
Release 1.0.111</li>
<li><a
href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>
from heiher/limb-64-la64</li>
<li><a
href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a>
Set limb width to 64 for loongarch64</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.12 to 4.4.13
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.13</h2>
<h2>[4.4.13] - 2024-01-04</h2>
<h3>Documentation</h3>
<ul>
<li>Fix link to structopt migration guide</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.13] - 2024-01-04</h2>
<h3>Documentation</h3>
<ul>
<li>Fix link to structopt migration guide</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a>
docs: Correct link to StructOpt migration guide</li>
<li><a
href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a>
from Manishearth/safety-docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a>
Correct safety docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a>
from henry-hsieh/fix-nosort</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a>
fix: Skip nosort option below bash 4.4</li>
<li><a
href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a>
from clap-rs/renovate/actions-setup-python-5.x</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.47 to 2.0.48
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.48</h2>
<ul>
<li>Improve error message on unexpected token after <code>else</code>
(<a
href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a>
Release 2.0.48</li>
<li><a
href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>
from dtolnay/elseblock</li>
<li><a
href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a>
Fix error message on unexpected token after 'else'</li>
<li><a
href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a>
from dtolnay/exhaustive</li>
<li><a
href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a>
Pick up changes to non_exhaustive_omitted_patterns lint</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Follow up from #2347 this time to verify that fixtures build to RISC-V

---------

Co-authored-by: alvicsam <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>

This PR fixes a bug in the tally accrual of approvals/rejections for
Candidates and Defender. The issue happened because:
- The `match maybe_old` is reducing `weight` from the tally:
```
Some(Vote { approve: true, weight }) => tally.approvals.saturating_reduce(weight),
Some(Vote { approve: false, weight }) => tally.rejections.saturating_reduce(weight),
```
- But `match approval` is accruing only `1` to the tally:
```
true => tally.approvals.saturating_accrue(1),
false => tally.rejections.saturating_accrue(1),
```

This way, if a member is rank 1 his vote is going to have weight 1 when
accruing but weight 4 when reducing from the tally. For example, let's
say:
- There's a Candidate with 0 approvals and 12 rejections;
- A ranked Member votes against the Candidate;
- The tally changes to 0 approvals and 13 rejections (should be 16);
- The Member changes his vote to an approval;
- Now tally changes to 1 approvals and 9 rejections, removing the
accrued approvals from other Members;
- If the Member keeps changing his vote, it wipes the tally clean.

So this PR changes `match approval` to accrue `weight` instead of just
`1` and changes the tests:
- Fixes `challenges_work`. This test started failing after the fix. The
reason is that the test assumes that all Members have equal weights to
their votes, but Member 10 is ranked, so his vote should have weight 4
against the Defender. So instead of using Member 10, I added Member 50
of rank 0 to keep the same logic;
- Improves `votes_are_working`. Added some assertions to check if the
tally is correct even after a ranked Member changes his vote a couple
times;
- Fixes `waive_repay_works`. Unrelated to the bug, but this test was
yielding a false positive. The test is ranking up Member 20, but
asserting the rank of Member 10, which is already ranked up.

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>

Bumps the known_good_semver group with 4 updates:
[serde](https://github.com/serde-rs/serde),
[serde_json](https://github.com/serde-rs/json),
[clap](https://github.com/clap-rs/clap) and
[serde_yaml](https://github.com/dtolnay/serde-yaml).

Updates `serde` from 1.0.193 to 1.0.194
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.194</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a>
Release 1.0.194</li>
<li><a
href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a>
Remove option_if_let_else clippy suppression</li>
<li><a
href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a>
Work around doc_link_with_quotes pedantic clippy lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.108 to 1.0.110
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.109</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a>
Release 1.0.110</li>
<li><a
href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a>
Release 1.0.109</li>
<li><a
href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a>
from serde-rs/doccfg</li>
<li><a
href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a>
Restore doc cfg on re-exports</li>
<li><a
href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a>
from dtolnay/hashtest</li>
<li><a
href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a>
Eliminate hash closure in favor of calling hash_one directly</li>
<li><a
href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a>
Use BuildHasher::hash_one</li>
<li><a
href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a>
Use random hasher state for number hashing test</li>
<li><a
href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a>
Delete trace_macros! functionality from test</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.11 to 4.4.12
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.12</h2>
<h2>[4.4.12] - 2023-12-28</h2>
<h3>Performance</h3>
<ul>
<li>Only ask <code>TypedValueParser</code> for possible values if
needed</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.12] - 2023-12-28</h2>
<h3>Performance</h3>
<ul>
<li>Only ask <code>TypedValueParser</code> for possible values if
needed</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a>
from vermiculus/sa/avoid-pv-expansion-in-help</li>
<li><a
href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a>
perf: Avoid retrieving possible_values unless used</li>
<li><a
href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a>
test: Update snapshots</li>
<li><a
href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a>
docs(complete): Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a>
docs(complete): Polish API reference for dynamic</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a>
from epage/docsrs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a>
docs: Include more content on docs.rs</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.29 to 0.9.30
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.30</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a>
Release 0.9.30</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a>
Remove option_if_let_else clippy suppression</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>