This MR contains two major changes and some maintenance cleanup.  

## 1. Free Standing Pallet Benchmark Runner

Closes https://github.com/paritytech/polkadot-sdk/issues/3045, depends
on your runtime exposing the `GenesisBuilderApi` (like
https://github.com/paritytech/polkadot-sdk/pull/1492).

Introduces a new binary crate: `frame-omni-bencher`.  
It allows to directly benchmark a WASM blob - without needing a node or
chain spec.

This makes it much easier to generate pallet weights and should allow us
to remove bloaty code from the node.
It should work for all FRAME runtimes that dont use 3rd party host calls
or non `BlakeTwo256` block hashing (basically all polkadot parachains
should work).

It is 100% backwards compatible with the old CLI args, when the `v1`
compatibility command is used. This is done to allow for forwards
compatible addition of new commands.

### Example (full example in the Rust docs)

Installing the CLI:
```sh
cargo install --locked --path subs...

Sometimes you need to debug some issues just by the logs and reconstruct
what happened.
In these scenarios it would be nice to know if a block was imported as
best block, and what it parent was.
So here I propose to change the output of the informant to this:

```
2024-04-05 20:38:22.004  INFO ⋮substrate: [Parachain] ✨ Imported #18 (0xe7b3…4555 -> 0xbd6f…ced7)    
2024-04-05 20:38:24.005  INFO ⋮substrate: [Parachain] ✨ Imported #19 (0xbd6f…ced7 -> 0x4dd0…d81f)    
2024-04-05 20:38:24.011  INFO ⋮substrate: [jobless-children-5352] 🌟 Imported #42 (0xed2e…27fc -> 0x718f…f30e)    
2024-04-05 20:38:26.005  INFO ⋮substrate: [Parachain] ✨ Imported #20 (0x4dd0…d81f -> 0x6e85…e2b8)    
2024-04-05 20:38:28.004  INFO ⋮substrate: [Parachain] 🌟 Imported #21 (0x6e85…e2b8 -> 0xad53…2a97)    
2024-04-05 20:38:30.004  INFO ⋮substrate: [Parachain] 🌟

 Imported #22 (0xad53…2a97 -> 0xa874…890f)    
```

---------

Co-authored-by: Bastian Köcher <[email protected]>

The stream was just used to communicate from the validator the peer
reports back to the gossip engine. Internally the gossip engine just
forwards these reports to the networking engine. So, we can just do this
directly.

The reporting stream was also pumped [in the worker behind the
engine](https://github.com/paritytech/polkadot-sdk/blob/9d626189/substrate/client/consensus/beefy/src/worker.rs#L939).
This means if there was a lot of data incoming over the engine, the
reporting stream was almost never processed and thus, it could have
started to grow and we have seen issues around this.

Partly Closes: https://github.com/paritytech/polkadot-sdk/issues/3945

Signed-off-by: hongkuang <[email protected]>

I don't think there are any more releases to the 0.2.x versions, so best
we're on the 0.3.x release.

No change on the benchmarks, fast local time is still just as fast as
before:

new version bench:
```
fast_local_time         time:   [30.551 ns 30.595 ns 30.668 ns]
```

old version bench:
```
fast_local_time         time:   [30.598 ns 30.646 ns 30.723 ns]
```

---------

Co-authored-by: Bastian Köcher <[email protected]>

1. Add `#[doc(no_inline)]` to frame umbrella crate re-exports that
eventually resolve to `frame_support_procedural` so docs don't look like
the screenshot below and instead link to the proper `frame-support`
docs.
<img width="1512" alt="Screenshot 2024-04-05 at 20 05 01"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/a41daa4c-ebca-44a4-9fea-f9f336314e13">


2. Remove `"Rust-Analyzer Users: "` prefix from
`frame_support_procedural` doc comments, since these doc comments are
visible in the web documentation and possible to stumble upon especially
when navigating from the frame umbrella crate.

Co-authored-by: Kian Paimani <[email protected]>

Decrements `total_deposit` when collection metadata is cleared in
`pallet-nfts` and `pallet-uniques`.

Defines a runtime api for `pallet-broker` for getting the current price
of a core if there is an ongoing sale.

Closes: #3413

---------

Co-authored-by: Bastian Köcher <[email protected]>

Signed-off-by: divdeploy <[email protected]>

This PR adds a check that `max_timeslices > 0` and errors if not. It
also adds a test for this behaviour and cleans up some misleading docs.

The runtime now can provide a number of predefined presets of
`RuntimeGenesisConfig` struct. This presets are intended to be used in
different deployments, e.g.: `local`, `staging`, etc, and should be
included into the corresponding chain-specs.

Having `GenesisConfig` presets in runtime allows to fully decouple node
from runtime types (the problem is described in #1984).

**Summary of changes:**
- The `GenesisBuilder` API was adjusted to enable this functionality
(and provide better naming - #150):
   ```rust
    fn preset_names() -> Vec<PresetId>;
fn get_preset(id: Option<PresetId>) -> Option<serde_json::Value>;
//`None` means default
    fn build_state(value: serde_json::Value);
    pub struct PresetId(Vec<u8>);
   ```

- **Breaking change**: Old `create_default_config` method was removed,
`build_config` was renamed to `build_state`. As a consequence a node
won't be able to interact with genesis config for older runtimes. The
cleanup was made for sake of API simplicity. Also IMO maintaining
compatibility with old API is not so crucial.
- Reference implementation was provided for `substrate-test-runtime` and
`rococo` runtimes. For rococo new
[`genesis_configs_presets`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/polkadot/runtime/rococo/src/genesis_config_presets.rs#L530)
module was added and is used in `GenesisBuilder`
[_presets-related_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/polkadot/runtime/rococo/src/lib.rs#L2462-L2485)
methods.

- The `chain-spec-builder` util was also improved and allows to
([_doc_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/substrate/bin/utils/chain-spec-builder/src/lib.rs#L19)):
   - list presets provided by given runtime (`list-presets`),
- display preset or default config provided by the runtime
(`display-preset`),
   - build chain-spec using named preset (`create ... named-preset`),


- The `ChainSpecBuilder` is extended with
[`with_genesis_config_preset_name`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/substrate/client/chain-spec/src/chain_spec.rs#L447)
method which allows to build chain-spec using named preset provided by
the runtime. Sample usage on the node side
[here](https://github.com/paritytech/polkadot-sdk/blob/2caffaae

/polkadot/node/service/src/chain_spec.rs#L404).

Implementation of #1984.
fixes: #150
part of: #25

---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

This function is currently only exposed to runtime-benchmarks, where it
should be available in all tests.

Also made it available in `std` because this is how `set_block_number`
works in FRAME System, however, not sure if it is needed in the latest
std/no_std paradigm.

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Part of https://github.com/paritytech/polkadot-sdk/issues/226 
Related https://github.com/paritytech/polkadot-sdk/issues/1833

- Deprecate `CurrencyAdapter` and introduce `FungibleAdapter`
- Deprecate `ToStakingPot` and replace usage with `ResolveTo`
- Required creating a new `StakingPotAccountId` struct that implements
`TypedGet` for the staking pot account ID
- Update parachain common utils `DealWithFees`, `ToAuthor` and
`AssetsToBlockAuthor` implementations to use `fungible`
- Update runtime XCM Weight Traders to use `ResolveTo` instead of
`ToStakingPot`
- Update runtime Transaction Payment pallets to use `FungibleAdapter`
instead of `CurrencyAdapter`
- [x] Blocked by https://github.com/paritytech/polkadot-sdk/pull/1296,
needs the `Unbalanced::decrease_balance` fix

## Basic example showcasing a migration using the MBM framework

This PR has been built on top of
https://github.com/paritytech/polkadot-sdk/pull/1781 and adds two new
example crates to the `examples` pallet

### Changes Made:

Added the `pallet-example-mbm` crate: This crate provides a minimal
example of a pallet that uses MBM. It showcases a storage migration
where values are migrated from a `u32` to a `u64`.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Closes https://github.com/paritytech/polkadot-sdk/issues/2977

The issue appears to stem from the `aquamarine` crate failing to render
diagrams in re-exported crates.

e.g. as raised
[here](https://github.com/paritytech/polkadot-sdk/issues/2977), diagrams
would render at `frame_support::traits::Hooks` but not the re-exported
doc `frame::traits::Hooks`, even if I added `aquamarine` as a `frame`
crate dependency.

To resolve this, I followed advice in
https://github.com/mersinvald/aquamarine/issues/20 to instead render
mermaid diagrams directly using JS by adding an `after-content.js`.

---

Also fixes compile warnings, enables `--all-features` and disallows
future warnings in CI.

---------

Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

CI will be enforcing this with next parity-publish release

Step in https://github.com/paritytech/polkadot-sdk/issues/3155

Needed for https://github.com/paritytech/eng-automation/issues/6

This PR renames `frame` crate to `polkadot-sdk-frame` as `frame` is not
available on crates.io

---------

Co-authored-by: Kian Paimani <[email protected]>

This PR ensure that the distance between any leaf and the finalized
block is within a reasonable distance.

For a new subscription, the chainHead has to provide all blocks between
the leaves of the chain and the finalized block.
 When the distance between a leaf and the finalized block is large:
 - The tree route is costly to compute
 - We could deliver an unbounded number of blocks (potentially millions)
(For more details see
https://github.com/paritytech/polkadot-sdk/pull/3445#discussion_r1507210283)

The configuration of the ChainHead is extended with:
- suspend on lagging distance: When the distance between any leaf and
the finalized block is greater than this number, the subscriptions are
suspended for a given duration.
- All active subscriptions are terminated with the `Stop` event, all
blocks are unpinned and data discarded.
- For incoming subscriptions, until the suspended period expires the
subscriptions will immediately receive the `Stop` event.
    - Defaults to 128 blocks
- suspended duration: The amount of time for which subscriptions are
suspended
    - Defaults to 30 seconds
 
 
 cc @paritytech/subxt-team

---------

Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>

Closes: https://github.com/paritytech/polkadot-sdk/issues/3909

Fixes
https://github.com/paritytech/polkadot-sdk/issues/3884#issuecomment-2026058687

After moving regression tests to benchmarks
(https://github.com/paritytech/polkadot-sdk/pull/3741) we don't need to
filter tests anymore.

---------

Signed-off-by: Alexandru Vasile <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: Alin Dima <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Niklas Adolfsson <[email protected]>
Co-authored-by: Dastan <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Clara van Staden <[email protected]>
Co-authored-by: Ron <[email protected]>
Co-authored-by: Vincent Geddes <[email protected]>
Co-authored-by: Svyatoslav Nikolsky <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Adds implementation for `SortedMembers::add` for _pallet-membership_
benchmarks.

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>

Added `TryFrom<&'a RuntimeString> for &'a str`

migrations: prevent accidentally using unversioned migrations instead of `VersionedMigration` (#3835)

closes #1324 

#### Problem
Currently, it is possible to accidentally use inner unversioned
migration instead of `VersionedMigration` since both implement
`OnRuntimeUpgrade`.

#### Solution

With this change, we make it clear that value of `Inner` is not intended
to be used directly. It is achieved by bounding `Inner` to new trait
`UncheckedOnRuntimeUpgrade`, which has the same interface (except
`unchecked_` prefix) as `OnRuntimeUpgrade`.

#### `try-runtime` functions

Since developers can implement `try-runtime` for `Inner` value in
`VersionedMigration` and have custom logic for it, I added the same
`try-runtime` functions to `UncheckedOnRuntimeUpgrade`. I looked for a
ways to not duplicate functions, but couldn't find anything that doesn't
significantly change the codebase. So I would appreciate If you have any
suggestions to improve this

cc @liamaharon

 @xlc 

polkadot address: 16FqwPZ8GRC5U5D4Fu7W33nA55ZXzXGWHwmbnE1eT6pxuqcT

---------

Co-authored-by: Liam Aharon <[email protected]>

Working towards migrating the `parity-bridges-common` repo inside
`polkadot-sdk`. This PR upgrades some dependencies in order to align
them with the versions used in `parity-bridges-common`

Related to
https://github.com/paritytech/parity-bridges-common/issues/2538

chainHead: Allow methods to be called from within a single connection context and limit connections (#3481)

This PR ensures that the chainHead RPC class can be called only from
within the same connection context.

The chainHead methods are now registered as raw methods. 
- https://github.com/paritytech/jsonrpsee/pull/1297
The concept of raw methods is introduced in jsonrpsee, which is an async
method that exposes the connection ID:
The raw method doesn't have the concept of a blocking method. Previously
blocking methods are now spawning a blocking task to handle their
blocking (ie DB) access. We spawn the same number of tasks as before,
however we do that explicitly.

Another approach would be implementing a RPC middleware that captures
and decodes the method parameters:
- https://github.com/paritytech/polkadot-sdk/pull/3343
However, that approach is prone to errors since the methods are
hardcoded by name. Performace is affected by the double deserialization
that needs to happen to extract the subscription ID we'd like to limit.
Once from the middleware, and once from the methods itself.

This PR paves the way to implement the chainHead connection limiter:
- https://github.com/paritytech/polkadot-sdk/issues/1505
Registering tokens (subscription ID / operation ID) on the
`RpcConnections` could be extended to return an error when the maximum
number of operations is reached.

While at it, have added an integration-test to ensure that chainHead
methods can be called from within the same connection context.

Before this is merged, a new JsonRPC release should be made to expose
the `raw-methods`:
- [x] Use jsonrpsee from crates io (blocked by:
https://github.com/paritytech/jsonrpsee/pull/1297)

Closes: https://github.com/paritytech/polkadot-sdk/issues/3207


cc @paritytech/subxt-team

---------

Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: Niklas Adolfsson <[email protected]>

This outputs:
```
2024-04-02 14:36:02.135 ERROR tokio-runtime-worker beefy: 🥩 for session starting at block 21990151
no BEEFY authority key found in store, you must generate valid session keys
(https://wiki.polkadot.network/docs/maintain-guides-how-to-validate-polkadot#generating-the-session-keys)
```
error log entry, once every session, for nodes running with
`Role::Authority` that have no public BEEFY key in their keystore

---------

Co-authored-by: Bastian Köcher <[email protected]>

derive-syn-parse v0.2.0 came out recently which (finally) adds support
for syn 2x.

Upgrading to this will remove many of the places where syn 1x was still
compiling alongside syn 2x in the polkadot-sdk workspace.

This also upgrades `docify` to 0.2.8 which is the version that upgrades
derive-syn-pasre to 0.2.0.

Additionally, this consolidates the `docify` versions in the repo to all
use the latest, and in one case upgrades to the 0.2x syntax where 0.1.x
was still being used.

---------

Co-authored-by: Liam Aharon <[email protected]>

fix https://github.com/paritytech/polkadot-sdk/issues/3921

---------

Signed-off-by: Andrei Sandu <[email protected]>

Related Issue https://github.com/paritytech/polkadot-sdk/issues/3398

This PR makes permissionless withdrawing the default option, giving any
network participant access to claim pool rewards on member's behalf. Of
course, members can still opt out of this by setting a `Permissioned`
claim permission.

Permissionless claiming has been a part of the nomination pool pallet
for around 9 months now, with very limited uptake (~4% of total pool
members). 1.6% of pool members are using `PermissionlessAll`, strongly
suggesting it is not wanted - it is too ambiguous and doesn't provide
guidance to claimers.

Stakers expect rewards to be claimed on their behalf by default - I have
expanded upon this in detail within the [accompanying issue's
discussion](https://github.com/paritytech/polkadot-sdk/issues/3398).
Other protocols have this behaviour, whereby staking rewards are
received without the staker having to take any action. From this
perspective, permissionless claiming is not intuitive for pool members.
As evidence of this, over 150,000 DOT is currently unclaimed on
Polkadot, and is growing at a non-linear rate.

Part of #3326 

cc @Kianenigma @ggwpez @liamaharon

 

polkadot address: 12poSUQPtcF1HUPQGY3zZu2P8emuW9YnsPduA4XG3oCEfJVp

---------

Signed-off-by: Matteo Muraca <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

Closes https://github.com/paritytech/polkadot-sdk-docs/issues/70

WIP PR for an overview of how to develop tokens in FRAME. 

- [x] Tokens in Substrate Ref Doc
  - High-level overview of the token-related logic in FRAME
- Improve docs with better explanation of how holds, freezes, ed, free
balance, etc, all work
- [x] Update `pallet_balances` docs
  - Clearly mark what is deprecated (currency)
- [x] Write fungible trait docs
- [x] Evaluate and if required update `pallet_assets`, `pallet_uniques`,
`pallet_nfts` docs
- [x] Absorb https://github.com/paritytech/polkadot-sdk/pull/2683/
- [x] Audit individual trait method docs, and improve if possible

Feel free to suggest additional TODOs for this PR in the comments

---------

Co-authored-by: Bill Laboon <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>

Fixes https://github.com/paritytech/polkadot-sdk/issues/3887.

Currently, all protocols use the same metric name for
`mpsc-notification-to-protocol` this is bad because we can't actually
tell which protocol might cause problems.

This patch proposes we derive the name of the metric from the protocol
name, so that we have separate metrics for each protocol and properly
detect which one is having problem processing its messages.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

Part of: https://github.com/paritytech/polkadot-sdk/issues/239

Polkadot address: 12GyGD3QhT4i2JJpNzvMf96sxxBLWymz4RdGCxRH5Rj5agKW

Fix reference links

Co-authored-by: Bastian Köcher <[email protected]>

Cleanup tests (-2.7k lines !) using some builder patterns to build
pallet_contracts api calls

This PR significantly refactors the runtime API implementations to
improve project structure, maintainability, and readability. Key changes
include:

1. **Enhancing Visibility**: Adjusts the visibility of
`RUNTIME_API_VERSIONS` in `impl_runtime_apis.rs` to `pub`, making it
accessible throughout the runtime module.
2. **Centralizing API Implementations**: Introduces a new file,
`apis.rs`, within the parachain template's runtime directory.
3. **Streamlining `lib.rs`**: Updates the main runtime library file to
reflect these structural changes. It removes redundant API
implementations and points `VERSION` to the newly exposed
`RUNTIME_API_VERSIONS` from `apis.rs`, simplifying the overall runtime
configuration.

### Motivations Behind the Refactoring:
- **Improved Project Structure**: Centralizing API implementations in
`apis.rs` offers a clearer, more navigable project structure.
- **Better Readability**: Streamlining `lib.rs` and reducing clutter
enhance readability, making it easier for new contributors to understand
the project layout and logic.

### Summary of Changes:
- Made `RUNTIME_API_VERSIONS` public in `impl_runtime_apis.rs`.
- Added `apis.rs` to centralize runtime API implementations.
- Streamlined `lib.rs` to adjust to the refactored project structure.

This PR add `#[deprecated]` attribute to v1 and v2 of the schedule
trait. Proposed in this issue:
https://github.com/paritytech/polkadot-sdk/issues/3676

```rust
#[allow(deprecated)]
#[deprecated = "traits::schedule::v1 is deprecated. Please use v3 instead."]
pub mod v1 {
...
}

#[allow(deprecated)]
#[deprecated = "traits::schedule::v2 is deprecated. Please use v3 instead."]
pub mod v2 {
...
}
```

polkadot address: 19nSqFQorfF2HxD3oBzWM3oCh4SaCRKWt1yvmgaPYGCo71J

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

There has been a case that a referenda failed because the length given
to `submit` was incorrect. The pallet can actually check the length if
the pre-image already exists to ensure that these kind of issues are not
happening again.

When the scheduler fails to lookup a `call`, it should unrequest it,
because it will not be required anymore.