- Jan 16, 2024
-
-
Francisco Aguirre authored
# Note for reviewer Most changes are just syntax changes necessary for the new version. Most important files should be the ones under the `xcm` folder. # Description Added XCMv4. ## Removed `Multi` prefix The following types have been renamed: - MultiLocation -> Location - MultiAsset -> Asset - MultiAssets -> Assets - InteriorMultiLocation -> InteriorLocation - MultiAssetFilter -> AssetFilter - VersionedMultiAsset -> VersionedAsset - WildMultiAsset -> WildAsset - VersionedMultiLocation -> VersionedLocation In order to fix a name conflict, the `Assets` in `xcm-executor` were renamed to `HoldingAssets`, as they represent assets in holding. ## Removed `Abstract` asset id It was not being used anywhere and this simplifies the code. Now assets are just constructed as follows: ```rust let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into(); ``` No need for specifying `Concrete` anymore. ## Outcome is now a named fields struct Instead of ```rust pub enum Outcome { Complete(Weight), Incomplete(Weight, Error), Error(Error), } ``` we now have ```rust pub enum Outcome { Complete { used: Weight }, Incomplete { used: Weight, error: Error }, Error { error: Error }, } ``` ## Added Reanchorable trait Now both locations and assets implement this trait, making it easier to reanchor both. ## New syntax for building locations and junctions Now junctions are built using the following methods: ```rust let location = Location { parents: 1, interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into() }; ``` or ```rust let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]); ``` And they are matched like so: ```rust match location.unpack() { (1, [Parachain(id)]) => ... (0, Here) => ..., (1, [_]) => ..., } ``` This syntax is mandatory in v4, and has been also implemented for v2 and v3 for easier migration. This was needed to make all sizes smaller. # TODO - [x] Scaffold v4 - [x] Port github.com/paritytech/polkadot/pull/7236 - [x] Remove `Multi` prefix - [x] Remove `Abstract` asset id --------- Co-authored-by: command-bot <> Co-authored-by:Keith Yeung <[email protected]>
-
Muharem Ismailov authored
Implements an XCM executor `WeightTrader`, facilitating fee payments in any asset that can be exchanged for a native asset. A few constraints need to be observed: - `buy_weight` and `refund` operations must be atomic, as another weight trader implementation might be attempted in case of failure. - swap credit must be utilized since there isn’t an account to which an asset of some class can be deposited with a guarantee to meet the existential deposit requirement. Also, operating with credits enhances the efficiency of the weight trader - https://github.com/paritytech/polkadot-sdk/pull/1677 related PRs: - (depends) https://github.com/paritytech/polkadot-sdk/pull/2031 - (depends) https://github.com/paritytech/polkadot-sdk/pull/1677 - (caused) https://github.com/paritytech/polkadot-sdk/pull/1847 - (caused) https://github.com/paritytech/polkadot-sdk/pull/1876 // DONE: impl `OnUnbalanced` for a `fungible/s` credit // DONE: make the trader free from a concept of a native currency and drop few fallible conversions. related issue - https://github.com/paritytech/polkadot-sdk/issues/1842 // DONE: tests --------- Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Liam Aharon <[email protected]>
-
- Jan 05, 2024
-
-
Bastian Köcher authored
This splits `cumulus-primitives-parachain-inherent` into two crates, the previous `cumulus-primitives-parachain-inherent` and a new `cumulus-client-parachain-inherent`. The idea behind this is to move the `create_at` logic into the client crate. This removes quite a lot of unrelated dependencies from the runtime std build and thus, makes the compilation faster. On my Laptop the compilation is goes down by one minute for `asset-hub-rococo-runtime`. I also assume that the full build of the entire workspace probably can be speed-up a little bit, because more stuff can be compiled in parallel. --------- Co-authored-by: command-bot <>
-
- Dec 18, 2023
-
-
Branislav Kontur authored
This PR contains just a few clippy fixes and nits, which are, however, relaxed by workspace clippy settings here: https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506 --------- Co-authored-by:
Dmitry Sinyavin <[email protected]> Co-authored-by:
ordian <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]>
-
dependabot[bot] authored
Bumps [async-trait](https://github.com/dtolnay/async-trait) from 0.1.73 to 0.1.74. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/async-trait/releases">async-trait's releases</a>.</em></p> <blockquote> <h2>0.1.74</h2> <ul> <li>Documentation improvements</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/async-trait/commit/265979b07a9af573e1edd3b2a9b179533cfa7a6c"><code>265979b</code></a> Release 0.1.74</li> <li><a href="https://github.com/dtolnay/async-trait/commit/5e677097d2e67f7a5c5e3023e2f3b99b36a9e132"><code>5e67709</code></a> Fix doc test when async fn in trait is natively supported</li> <li><a href="https://github.com/dtolnay/async-trait/commit/ef144aed28b636eb65759505b2323afc4c753fbe"><code>ef144ae</code></a> Update ui test suite to nightly-2023-10-15</li> <li><a href="https://github.com/dtolnay/async-trait/commit/9398a28d6fc977ccf8c286bd85b4b87a883f92ac"><code>9398a28</code></a> Test docs.rs documentation build in CI</li> <li><a href="https://github.com/dtolnay/async-trait/commit/8737173dafa371e5e9e491d736513be1baf697f4"><code>8737173</code></a> Update ui test suite to nightly-2023-09-24</li> <li><a href="https://github.com/dtolnay/async-trait/commit/5ba643c001a55f70c4a44690e040cdfab873ba56"><code>5ba643c</code></a> Test dyn Trait containing async fn</li> <li><a href="https://github.com/dtolnay/async-trait/commit/247c8e7b0b3ff69c9518ebf93e69fe74d47f17b6"><code>247c8e7</code></a> Add ui test testing the recommendation to use async-trait</li> <li><a href="https://github.com/dtolnay/async-trait/commit/799db66a84834c403860df4a8c0227d8fb7f9d9d"><code>799db66</code></a> Update ui test suite to nightly-2023-09-23</li> <li><a href="https://github.com/dtolnay/async-trait/commit/0e60248011f751d8ccf58219d0a79aacfe9619f1"><code>0e60248</code></a> Update actions/checkout@v3 -> v4</li> <li><a href="https://github.com/dtolnay/async-trait/commit/7fcbc83993d5ef483d048c271a7f6c4ac8c98388"><code>7fcbc83</code></a> Update ui test suite to nightly-2023-08-29</li> <li>See full diff in <a href="https://github.com/dtolnay/async-trait/compare/0.1.73...0.1.74">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Dec 13, 2023
-
-
Squirrel authoredWe currently use a bit of a hack in `.cargo/config` to make sure that clippy isn't too annoying by specifying the list of lints. There is now a stable way to define lints for a workspace. The only down side is that every crate seems to have to opt into this so there's a *few* files modified in this PR. Dependencies: - [x] PR that upgrades CI to use rust 1.74 is merged. --------- Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
-
- Dec 01, 2023
-
-
Liam Aharon authored
Using taplo, fixes all our broken and inconsistent toml formatting and adds CI to keep them tidy. If people want we can customise the format rules as described here https://taplo.tamasfe.dev/configuration/formatter-options.html @ggwpez , I suggest zepter is used only for checking features are propagated, and leave formatting for taplo to avoid duplicate work and conflicts. TODO - [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet tests instead of deleting the dir --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
-
- Nov 30, 2023
-
-
Sebastian Kunert authored
This PR provides the infrastructure for the pov-reclaim mechanism discussed in #209. The goal is to provide the current proof size to the runtime so it can be used to reclaim storage weight. ## New Host Function - A new host function is provided [here](https://github.com/skunert/polkadot-sdk/blob/5b317fda /cumulus/primitives/pov-reclaim/src/lib.rs#L23). It returns the size of the current proof size to the runtime. If recording is not enabled, it returns 0. ## Implementation Overview - Implement option to enable proof recording during import in the client. This is currently enabled for `polkadot-parachain`, `parachain-template` and the cumulus test node. - Make the proof recorder ready for no-std. It was previously only enabled for std environments, but we need to record the proof size in `validate_block` too. - Provide a recorder implementation that only the records the size of incoming nodes and does not store the nodes itself. - Fix benchmarks that were broken by async backing changes - Provide new externalities extension that is registered by default if proof recording is enabled. - I think we should discuss the naming, pov-reclaim was more intuitive to me, but we could also go with clawback like in the issue. ## Impact of proof recording during import With proof recording: 6.3058 Kelem/s Without proof recording: 6.3427 Kelem/s The measured impact on the importing performance is quite low on my machine using the block import benchmark. With proof recording I am seeing a performance hit of 0.585%. --------- Co-authored-by: command-bot <> Co-authored-by:
Davide Galassi <[email protected]> Co-authored-by:
-
- Nov 22, 2023
-
-
girazoki authored
Add the possibility to inject additional key-values in the sproof-builder that generates the relay root that gets stored in parachain-system. Rationale: pallets that verify additional storage items (not those verified by parachain-system) from the relay should be able to proof against the relay root that gets stored in parachain-system. This PR allows to create provide additional nibles that can later be used for verifiability in other pallets
-
- Nov 09, 2023
-
-
Oliver Tale-Yazdi authoredMissing descriptions (47): - [x] `cumulus/client/collator/Cargo.toml` - [x] `cumulus/client/relay-chain-inprocess-interface/Cargo.toml` - [x] `cumulus/client/cli/Cargo.toml` - [x] `cumulus/client/service/Cargo.toml` - [x] `cumulus/client/relay-chain-rpc-interface/Cargo.toml` - [x] `cumulus/client/relay-chain-interface/Cargo.toml` - [x] `cumulus/client/relay-chain-minimal-node/Cargo.toml` - [x] `cumulus/parachains/pallets/parachain-info/Cargo.toml` - [x] `cumulus/parachains/pallets/ping/Cargo.toml` - [x] `cumulus/primitives/utility/Cargo.toml` - [x] `cumulus/primitives/aura/Cargo.toml` - [x] `cumulus/primitives/core/Cargo.toml` - [x] `cumulus/primitives/parachain-inherent/Cargo.toml` - [x] `cumulus/test/relay-sproof-builder/Cargo.toml` - [x] `cumulus/pallets/xcmp-queue/Cargo.toml` - [x] `cumulus/pallets/dmp-queue/Cargo.toml` - [x] `cumulus/pallets/xcm/Cargo.toml` - [x] `polkadot/erasure-coding/Cargo.toml` - [x] `polkadot/statement-table/Cargo.toml` - [x] `polkadot/primitives/Cargo.toml` - [x] `polkadot/rpc/Cargo.toml` - [x] `polkadot/node/service/Cargo.toml` - [x] `polkadot/node/core/parachains-inherent/Cargo.toml` - [x] `polkadot/node/core/approval-voting/Cargo.toml` - [x] `polkadot/node/core/dispute-coordinator/Cargo.toml` - [x] `polkadot/node/core/av-store/Cargo.toml` - [x] `polkadot/node/core/chain-api/Cargo.toml` - [x] `polkadot/node/core/prospective-parachains/Cargo.toml` - [x] `polkadot/node/core/backing/Cargo.toml` - [x] `polkadot/node/core/provisioner/Cargo.toml` - [x] `polkadot/node/core/runtime-api/Cargo.toml` - [x] `polkadot/node/core/bitfield-signing/Cargo.toml` - [x] `polkadot/node/network/dispute-distribution/Cargo.toml` - [x] `polkadot/node/network/bridge/Cargo.toml` - [x] `polkadot/node/network/collator-protocol/Cargo.toml` - [x] `polkadot/node/network/approval-distribution/Cargo.toml` - [x] `polkadot/node/network/availability-distribution/Cargo.toml` - [x] `polkadot/node/network/bitfield-distribution/Cargo.toml` - [x] `polkadot/node/network/gossip-support/Cargo.toml` - [x] `polkadot/node/network/availability-recovery/Cargo.toml` - [x] `polkadot/node/collation-generation/Cargo.toml` - [x] `polkadot/node/overseer/Cargo.toml` - [x] `polkadot/runtime/parachains/Cargo.toml` - [x] `polkadot/runtime/common/slot_range_helper/Cargo.toml` - [x] `polkadot/runtime/metrics/Cargo.toml` - [x] `polkadot/xcm/pallet-xcm-benchmarks/Cargo.toml` - [x] `polkadot/utils/generate-bags/Cargo.toml` - [x] `substrate/bin/minimal/runtime/Cargo.toml` --------- Signed-off-by:
alindima <[email protected]> Co-authored-by:
ordian <[email protected]> Co-authored-by:
Tsvetomir Dimitrov <[email protected]> Co-authored-by:
Marcin S <[email protected]> Co-authored-by:
Sebastian Kunert <[email protected]> Co-authored-by:
Dmitry Markin <[email protected]> Co-authored-by:
-
- Nov 02, 2023
-
-
Oliver Tale-Yazdi authored
(imported from https://github.com/paritytech/cumulus/pull/2157) ## Changes This MR refactores the XCMP, Parachains System and DMP pallets to use the [MessageQueue](https://github.com/paritytech/substrate/pull/12485) for delayed execution of incoming messages. The DMP pallet is entirely replaced by the MQ and thereby removed. This allows for PoV-bounded execution and resolves a number of issues that stem from the current work-around. All System Parachains adopt this change. The most important changes are in `primitives/core/src/lib.rs`, `parachains/common/src/process_xcm_message.rs`, `pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs` and the runtime configs. ### DMP Queue Pallet The pallet got removed and its logic refactored into parachain-system. Overweight message management can be done directly through the MQ pallet. Final undeployment migrations are provided by `cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that can be configured with an aux config trait like: ```rust parameter_types! { pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME; pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent; } impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime { type PalletName = DmpQueuePalletName; type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>; type DbWeight = <Runtime as frame_system::Config>::DbWeight; } // And adding them to your Migrations tuple: pub type Migrations = ( ... cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>, cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>, ); ``` ### XCMP Queue pallet Removed all dispatch queue functionality. Incoming XCMP messages are now either: Immediately handled if they are Signals, enqueued into the MQ pallet otherwise. New config items for the XCMP queue pallet: ```rust /// The actual queue implementation that retains the messages for later processing. type XcmpQueue: EnqueueMessage<ParaId>; /// How a XCM over HRMP from a sibling parachain should be processed. type XcmpProcessor: ProcessMessage<Origin = ParaId>; /// The maximal number of suspended XCMP channels at the same time. #[pallet::constant] type MaxInboundSuspended: Get<u32>; ``` How to configure those: ```rust // Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since // the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s. type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>; // Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched // with origin `Junction::Sibling(…)`. type XcmpProcessor = ProcessFromSibling< ProcessXcmMessage< AggregateMessageOrigin, xcm_executor::XcmExecutor<xcm_config::XcmConfig>, RuntimeCall, >, >; // Not really important what to choose here. Just something larger than the maximal number of channels. type MaxInboundSuspended = sp_core::ConstU32<1_000>; ``` The `InboundXcmpStatus` storage item was replaced by `InboundXcmpSuspended` since it now only tracks inbound queue suspension and no message indices anymore. Now only sends the most recent channel `Signals`, as all prio ones are out-dated anyway. ### Parachain System pallet For `DMP` messages instead of forwarding them to the `DMP` pallet, it now pushes them to the configured `DmpQueue`. The message processing which was triggered in `set_validation_data` is now being done by the MQ pallet `on_initialize`. XCMP messages are still handed off to the `XcmpMessageHandler` (XCMP-Queue pallet) - no change here. New config items for the parachain system pallet: ```rust /// Queues inbound downward messages for delayed processing. /// /// Analogous to the `XcmpQueue` of the XCMP queue pallet. type DmpQueue: EnqueueMessage<AggregateMessageOrigin>; ``` How to configure: ```rust /// Use the MQ pallet to store DMP messages for delayed processing. type DmpQueue = MessageQueue; ``` ## Message Flow The flow of messages on the parachain side. Messages come in from the left via the `Validation Data` and finally end up at the `Xcm Executor` on the right.  ## Further changes - Bumped the default suspension, drop and resume thresholds in `QueueConfigData::default()`. - `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when they would be a noop. - Properly validate the `QueueConfigData` before setting it. - Marked weight files as auto-generated so they wont auto-expand in the MR files view. - Move the `hypothetical` asserts to `frame_support` under the name `experimental_hypothetically` Questions: - [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in the runtimes? Not sure how to best fix. Just having them like this makes tests fail that rely on the real message processor when the feature is enabled. - [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler already takes 80% so I put it to 10% but that is quite low. TODO: - [x] Remove c&p code after https://github.com/paritytech/polkadot/pull/6271 - [x] Use `HandleMessage` once it is public in Substrate - [x] fix `runtime-benchmarks` feature https://github.com/paritytech/polkadot/pull/6966 - [x] Benchmarks - [x] Tests - [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended` - [x] Possibly cleanup Migrations (DMP+XCMP) - [x] optional: create `TransformProcessMessageOrigin` in Substrate and replace `ProcessFromSibling` - [ ] Rerun weights on ref HW --------- Signed-off-by:Kian Paimani <[email protected]> Co-authored-by: command-bot <>
-
- Nov 01, 2023
-
-
Oliver Tale-Yazdi authored
Changes: - Change the fungible(s) logic to treat a self-transfer as No-OP (as long as all pre-checks pass). Note that the self-transfer case will not emit an event since no state was changed. --------- Signed-off-by:
-
- Oct 31, 2023
-
-
Lulu authored
Co-authored-by:
Sergejs Kostjucenko <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]>
-
- Oct 24, 2023
-
-
Oliver Tale-Yazdi authored
Adds a config file that allows to run `zepter` without any arguments in the workspace to address all issues. A secondary workflow for the CI is provided as `zepter run check`. Both the formatting and linting are now in one check for efficiancy. The latest version also detects some more things that `featalign` was already showing. Error message [in the CI](https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/3916205) now looks like this: ```pre ... crate 'test-parachains' (/Users/vados/Documents/work/polkadot-sdk/polkadot/parachain/test-parachains/Cargo.toml) feature 'std' must propagate to: parity-scale-codec Found 55 issues (run with --fix to fix). Error: Command 'lint propagate-feature' failed with exit code 1 Polkadot-SDK uses the Zepter CLI to detect abnormalities in the feature configuration. It looks like one more more checks failed; please check the console output. You can try to automatically address them by running `zepter`. Otherwise please ask directly in the Merge Request, GitHub Discussions or on Matrix Chat, thank you. For more information, see: - https://github.com/paritytech/polkadot-sdk/issues/1831 - https://github.com/ggwpez/zepter ``` TODO: - [x] Check that CI fails correctly --------- Signed-off-by:
-
- Oct 20, 2023
-
-
Bastian Köcher authored
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to crates.io as someone as squatted `xcm`. The problem with this rename is that the `TypeInfo` includes the crate name which ultimately lands in the metadata. The metadata is consumed by downstream users like `polkadot-js` or people building on top of `polkadot-js`. These people are using the entire `path` to find the type in the type registry. Thus, their code would break as the type path would now be [`staging_xcm`, `VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request fixes this by renaming the path segment `staging_xcm` to `xcm`. This requires: https://github.com/paritytech/scale-info/pull/197 --------- Co-authored-by:Francisco Aguirre <[email protected]>
-
- Oct 18, 2023
-
-
Keith Yeung authored
Combination of paritytech/polkadot#7005, its addon PR paritytech/polkadot#7585 and its companion paritytech/cumulus#2433. This PR introduces a new XcmFeesToAccount struct which implements the `FeeManager` trait, and assigns this struct as the `FeeManager` in the XCM config for all runtimes. The struct simply deposits all fees handled by the XCM executor to a specified account. In all runtimes, the specified account is configured as the treasury account. XCM __delivery__ fees are now being introduced (unless the root origin is sending a message to a system parachain on behalf of the originating chain). # Note for reviewers Most file changes are tests that had to be modified to account for the new fees. Main changes are in: - cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery fees exponential factor - polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the FeeManager implementation - All runtime xcm_config files <- To add the FeeManager to the XCM configuration # Important note After this change, instructions that create and send a new XCM (Query*, Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport, DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock) will require the corresponding origin account in the origin register to pay for transport delivery fees, and the onward message will fail to be sent if the origin account does not have the required amount. This delivery fee is on top of what we already collect as tx fees in pallet-xcm and XCM BuyExecution fees! Wallet UIs that want to expose the new delivery fee can do so using the formula: ``` delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee) ``` where the delivery fee factor can be obtained from the corresponding pallet based on which transport you are using (UMP, HRMP or bridges), the base fee is a constant, the encoded message length from the message itself and the per byte fee is the same as the configured per byte fee for txs (i.e. `TransactionByteFee`). --------- Co-authored-by:
Giles Cope <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
-
- Sep 14, 2023
-
-
Muharem Ismailov authored
Enable `runtime-benchmarks` feature for `parachain-common` and `cumulus-primitives-utility` crates' dependencies. After adding `runtime-benchmarks = []` under `features` category in `Cargo.toml` files for the creates, I did run, > zepter lint propagate-feature --feature runtime-benchmarks --workspace --fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking" This changes required for https://github.com/paritytech/polkadot-sdk/pull/1333
-
- Aug 31, 2023
-
-
Bastian Köcher authored
* Rename `polkadot-parachain` to `polkadot-parachain-primitives` While doing this it also fixes some last `rustdoc` issues and fixes another Cargo warning related to `pallet-paged-list`. * Fix compilation * ".git/.scripts/commands/fmt/fmt.sh" * Fix XCM docs --------- Co-authored-by: command-bot <>
-
juangirini authored
* restructure dispatch macro related exports * moved Dispatchable to lib.rs * fix .gitignore final newline * ".git/.scripts/commands/fmt/fmt.sh" * fix rustdocs * wip --------- Co-authored-by:
-
- Aug 30, 2023
-
-
Lulu authored
* Rename squatted crates This commit adds the staging- prefix to squatted crates so we can go forward and publish them to crates.io. Using the staging- prefix is a temp fix until we decide on replacement names. https://forum.parity.io/t/renaming-squated-crates-in-substrate-polkadot-cumulus/1964/6 * Fix test after crate renames * Update Lockfile
-
Przemek Rzad authored
* Add missing Cumulus licenses * Typo * Add missing Substrate licenses * Single job checking the sub-repos in steps * Remove dates * Remove dates * Add missing (C) * Update FRAME UI tests Signed-off-by:
-
- Aug 29, 2023
-
-
Oliver Tale-Yazdi authored
* Fix build profiles Closes https://github.com/paritytech/polkadot-sdk/issues/1155 Signed-off-by:
-
- Aug 28, 2023
-
-
Oliver Tale-Yazdi authored
* Manually fix conflicting ? Signed-off-by:
🤦 Signed-off-by:
-
- Aug 25, 2023
-
-
Alexander Samusev authored
* Add CI for monorepo * fix frame tests * Format features Signed-off-by:
-
Alexander authoredSigned-off-by:alvicsam <[email protected]>
-
- Aug 18, 2023
-
-
Chris Sosnin authored
* Update substrate & polkadot * min changes to make async backing compile * (async backing) parachain-system: track limitations for unincluded blocks (#2438) * unincluded segment draft * read para head from storage proof * read_para_head -> read_included_para_head * Provide pub interface * add errors * fix unincluded segment update * BlockTracker -> Ancestor * add a dmp limit * Read para head depending on the storage switch * doc comments * storage items docs * add a sanity check on block initialize * Check watermark * append to the segment on block finalize * Move segment update into set_validation_data * Resolve para head todo * option watermark * fix comment * Drop dmq check * fix weight * doc-comments on inherent invariant * Remove TODO * add todo * primitives tests * pallet tests * doc comments * refactor unincluded segment length into a ConsensusHook (#2501) * refactor unincluded segment length into a ConsensusHook * add docs * refactor bandwidth_out calculation Co-authored-by:
Chris Sosnin <[email protected]> * test for limits from impl * fmt * make tests compile * update comment * uncomment test * fix collator test by adding parent to state proof * patch HRMP watermark rules for unincluded segment * get consensus-common tests to pass, using unincluded segment * fix unincluded segment tests * get all tests passing * fmt * rustdoc CI * aura-ext: limit the number of authored blocks per slot (#2551) * aura_ext consensus hook * reverse dependency * include weight into hook * fix tests * remove stray println Co-authored-by:
Chris Sosnin <[email protected]> * parachain-system: ignore go ahead signal once upgrade is processed (#2594) * handle goahead signal for unincluded segment * doc comment * add test * parachain-system: drop processed messages from inherent data (#2590) * implement `drop_processed_messages` * drop messages based on relay parent number * adjust tests * drop changes to mqc * fix comment * drop test * drop more dead code * clippy * aura-ext: check slot in consensus hook and remove all `CheckInherents` logic (#2658) * aura-ext: check slot in consensus hook * convert relay chain slot * Make relay chain slot duration generic * use fixed velocity hook for pallets with aura * purge timestamp inherent * fix warning * adjust runtime tests * fix slots in tests * Make `xcm-emulator` test pass for new consensus hook (#2722) * add pallets on_initialize * tests pass * add AuraExt on_init * ".git/.scripts/commands/fmt/fmt.sh" --------- Co-authored-by: command-bot <> --------- Co-authored-by:
Ignacio Palacios <[email protected]> * update polkadot git refs * CollationGenerationConfig closure is now optional (#2772) * CollationGenerationConfig closure is now optional * fix test * propagate network-protocol-staging feature (#2899) * Feature Flagging Consensus Hook Type Parameter (#2911) * First pass * fmt * Added as default feature in tomls * Changed to direct dependency feature * Dealing with clippy error * Update pallets/parachain-system/src/lib.rs Co-authored-by:
asynchronous rob <[email protected]> --------- Co-authored-by:
Marcin S. <[email protected]> * (async backing) restore `CheckInherents` for backwards-compatibility (#2977) * bring back timestamp * Restore CheckInherents * revert to empty CheckInherents * make CheckInherents optional * attempt * properly end system blocks * add some more comments * ignore failing system parachain tests * update refs after main feature branch merge * comment out the offending tests because CI runs ignored tests * fix warnings * fmt * revert to polkadot master * cargo update -p polkadot-primitives -p sp-io --------- Co-authored-by:
Bradley Olson <[email protected]> Co-authored-by:
eskimor <[email protected]> Co-authored-by:
-
- Aug 15, 2023
-
-
dependabot[bot] authored
Bumps [log](https://github.com/rust-lang/log) from 0.4.19 to 0.4.20. - [Release notes](https://github.com/rust-lang/log/releases) - [Changelog](https://github.com/rust-lang/log/blob/master/CHANGELOG.md) - [Commits](https://github.com/rust-lang/log/compare/0.4.19...0.4.20) --- updated-dependencies: - dependency-name: log dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by:
-
dependabot[bot] authored
Bumps [async-trait](https://github.com/dtolnay/async-trait) from 0.1.72 to 0.1.73. - [Release notes](https://github.com/dtolnay/async-trait/releases) - [Commits](https://github.com/dtolnay/async-trait/compare/0.1.72...0.1.73) --- updated-dependencies: - dependency-name: async-trait dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by:
-
- Aug 14, 2023
-
-
Oliver Tale-Yazdi authored
* Copy rustfmt.toml from Polkadot master Signed-off-by:
-
- Aug 01, 2023
-
-
Branislav Kontur authored
* `XcmContext` to `buy_weight / refund_weight` * Fix tests * Fix more tests * update lockfile for {"substrate", "polkadot"} --------- Co-authored-by: parity-processbot <>
-
- Jul 22, 2023
-
-
dependabot[bot] authored
Bumps [async-trait](https://github.com/dtolnay/async-trait) from 0.1.71 to 0.1.72. - [Release notes](https://github.com/dtolnay/async-trait/releases) - [Commits](https://github.com/dtolnay/async-trait/compare/0.1.71...0.1.72) --- updated-dependencies: - dependency-name: async-trait dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by:
-
- Jul 11, 2023
-
-
asynchronous rob authored
* rough draft of potential parent search * get things compiling * fmt * add new function to all RelayChainInterface implementations * fix compilation * set slot and timestamp based on relay parent, prepare for find-parent * skeleton of new aura logic * fmt * introduce a collator module in the Aura crate * extract different implementations into own modules * make interface more convenient * docs and todos for lookahead * refactor basic collator to use new collator utility * some more refactoring * finish most of the control flow for new aura * introduce backend as parameter * fix compilation * fix a couple more TODOs * add an `announce_block` function to collator service * announce with barrier * rename block announcement validator to be more specific * fmt * clean up unused import errors * update references to BlockAnnounceValidator * rename unstable_reimpl * add AuraUnincludedSegmentApi * finish rename * integrate AuraUnincludedSegmentApi * add a new block announcement validator for backwards compatibility * add some naive equivocation defenses * rustfmt * clean up remaining TODO [now]s * fmt * try to fix inprocess-interface * actually fix compilation * ignored -> rejected rephrase * fix test compilation * fmt * clippy
-
- Jul 06, 2023
-
-
dependabot[bot] authored
Bumps [async-trait](https://github.com/dtolnay/async-trait) from 0.1.70 to 0.1.71. - [Release notes](https://github.com/dtolnay/async-trait/releases) - [Commits](https://github.com/dtolnay/async-trait/compare/0.1.70...0.1.71) --- updated-dependencies: - dependency-name: async-trait dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by:
-
- Jul 05, 2023
-
-
dependabot[bot] authored
Bumps [async-trait](https://github.com/dtolnay/async-trait) from 0.1.68 to 0.1.70. - [Release notes](https://github.com/dtolnay/async-trait/releases) - [Commits](https://github.com/dtolnay/async-trait/compare/0.1.68...0.1.70) --- updated-dependencies: - dependency-name: async-trait dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by:
-
- Jul 03, 2023
-
-
dependabot[bot] authored
Bumps [scale-info](https://github.com/paritytech/scale-info) from 2.8.0 to 2.9.0. - [Release notes](https://github.com/paritytech/scale-info/releases) - [Changelog](https://github.com/paritytech/scale-info/blob/master/CHANGELOG.md) - [Commits](https://github.com/paritytech/scale-info/compare/v2.8.0...v2.9.0) --- updated-dependencies: - dependency-name: scale-info dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by:
-
- Jun 22, 2023
-
-
dependabot[bot] authored
Bumps [scale-info](https://github.com/paritytech/scale-info) from 2.7.0 to 2.8.0. - [Release notes](https://github.com/paritytech/scale-info/releases) - [Changelog](https://github.com/paritytech/scale-info/blob/master/CHANGELOG.md) - [Commits](https://github.com/paritytech/scale-info/compare/v2.7.0...v2.8.0) --- updated-dependencies: - dependency-name: scale-info dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by:
-
- Jun 13, 2023
-
-
dependabot[bot] authored
Bumps [log](https://github.com/rust-lang/log) from 0.4.18 to 0.4.19. - [Release notes](https://github.com/rust-lang/log/releases) - [Changelog](https://github.com/rust-lang/log/blob/master/CHANGELOG.md) - [Commits](https://github.com/rust-lang/log/compare/0.4.18...0.4.19) --- updated-dependencies: - dependency-name: log dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by:
-
- May 31, 2023
-
-
dependabot[bot] authored
Bumps [log](https://github.com/rust-lang/log) from 0.4.17 to 0.4.18. - [Release notes](https://github.com/rust-lang/log/releases) - [Changelog](https://github.com/rust-lang/log/blob/master/CHANGELOG.md) - [Commits](https://github.com/rust-lang/log/compare/0.4.17...0.4.18) --- updated-dependencies: - dependency-name: log dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by:
-
- May 25, 2023
-
-
Gavin Wood authored
* Fixes for new API * Formatting * Fixes * Fixes * Further fixes * XCMP dispatch events mention message ID * XCMP event includes ID * Add DMP message ID functionality * Integrate into test parachains * Remove WithUniqueTopic usage * Use new primitive * Formatting * undiener * Revert lock * Fixes * Fixes * Fixes * Fixes * Formatting * message_hash becomes message_id * Rename * Another Rename * Fixes * Fix * Bump * Fixes * Grumble.
-
- May 23, 2023
-
-
Koute authored
* Do not assume `AssetId`s are `Copy` * update lockfile for {"substrate", "polkadot"} --------- Co-authored-by: parity-processbot <>
-
![dependabot[bot]'s avatar](https://secure.gravatar.com/avatar/bd5a8d6c673b738d52b0ac42a110045f3f964b3ebfc1d60ea805af743b1dc0e6?s=80&d=identicon "dependabot[bot]")
