# Description
We derive few useful traits on `ErrorOrigin` and `ExecError`, including
`codec::Encode` and `codec::Decode`, so that `ExecResult` is
en/decodable as well. This is required for a contract mocking feature
(already prepared in drink:
https://github.com/Cardinal-Cryptography/drink/pull/61). In more detail:
`ExecResult` must be passed from runtime extension, through runtime
interface, back to the pallet, which requires that it is serializable to
bytes in some form (or implements some rare, auxiliary traits).

**Impact on runtime size**: Since most of these traits is used directly
in the pallet now, compiler should be able to throw it out (and thus we
bring no new overhead). However, they are very useful in secondary tools
like drink or other testing libraries.

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [x] I have made corresponding changes to the documentation (if
applicable)
- [x] I have added tests that prove my fix is effective or that my
feature works (if applicable)

Fix for failed pipeline `test-doc`:
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4174859
I just wonder how could have other PR been merged after this was merged:
https://github.com/paritytech/polkadot-sdk/pull/1714/files#diff-1bde7bb2be0165cbe6db391e10a4a0b2f333348681373a86a0f8502d14d20d32R56

Changes:
- Change the fungible(s) logic to treat a self-transfer as No-OP (as
long as all pre-checks pass).

Note that the self-transfer case will not emit an event since no state
was changed.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

This is a port (and hopefully a small improvement) of @Kianenigma's PR
from the old Substrate repo:
https://github.com/paritytech/substrate/pull/13987. Following #1689 I
moved the documentation of all macros relevant to this PR from
`frame_support_procedural` to `pallet_macros` while including a hint for
RA users.

Question: Again with respect to #1689: Is there a good reason why we
should *not* enhance paths with links to our current rustdocs? For
example, instead of
```rust
/// **Rust-Analyzer users**: See the documentation of the Rust item in
/// `frame_support::pallet_macros::storage`.
```
we could write
```rust
/// **Rust-Analyzer users**: See the documentation of the Rust item in
/// [`frame_support::pallet_macros::storage`](https://paritytech.github.io/polkadot-sdk/master/frame_support/pallet_macros/attr.storage.html).
```
This results in a clickable link like this:
<img width="674" alt="image"
src="https://github.com/paritytech/polkadot-sdk/assets/10713977/c129e622-3942-4eeb-8acf-93ee4efdc99d

">
I don't really expect the links to become outdated any time soon, but I
think this would be a great UX improvement over just having paths.

TODOs:
- [ ] Add documentation for `constant_name` macro
- [x] Add proper documentation for different `QueryKinds`, i.e.
`OptionQuery`, `ValueQuery`, `ResultQuery`. One example for each. Custom
`OnEmpty` should be moved to `QueryKinds` trait doc page.
- [ ] Rework `type_value` docs

---------

Co-authored-by: kianenigma <[email protected]>

helps https://github.com/paritytech/polkadot-sdk/issues/439.
closes https://github.com/paritytech/polkadot-sdk/issues/473.

PR link in the older substrate repository:
https://github.com/paritytech/substrate/pull/13498.

# Context
Rewards payout is processed today in a single block and limited to
`MaxNominatorRewardedPerValidator`. This number is currently 512 on both
Kusama and Polkadot.

This PR tries to scale the nominators payout to an unlimited count in a
multi-block fashion. Exposures are stored in pages, with each page
capped to a certain number (`MaxExposurePageSize`). Starting out, this
number would be the same as `MaxNominatorRewardedPerValidator`, but
eventually, this number can be lowered through new runtime upgrades to
limit the rewardeable nominators per dispatched call instruction.

The changes in the PR are backward compatible.

## How payouts would work like after this change
Staking exposes two calls, 1) the existing `payout_stakers` and 2)
`payout_stakers_by_page`.

### payout_stakers
This remains backward compatible with no signature change. If for a
given era a validator has multiple pages, they can call `payout_stakers`
multiple times. The pages are executed in an ascending sequence and the
runtime takes care of preventing double claims.

### payout_stakers_by_page
Very similar to `payout_stakers` but also accepts an extra param
`page_index`. An account can choose to payout rewards only for an
explicitly passed `page_index`.

**Lets look at an example scenario**
Given an active validator on Kusama had 1100 nominators,
`MaxExposurePageSize` set to 512 for Era e. In order to pay out rewards
to all nominators, the caller would need to call `payout_stakers` 3
times.

- `payout_stakers(origin, stash, e)` => will pay the first 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the second set of 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the last set of 76
nominators.
...
- `payout_stakers(origin, stash, e)` => calling it the 4th time would
return an error `InvalidPage`.

The above calls can also be replaced by `payout_stakers_by_page` and
passing a `page_index` explicitly.

## Commission note
Validator commission is paid out in chunks across all the pages where
each commission chunk is proportional to the total stake of the current
page. This implies higher the total stake of a page, higher will be the
commission. If all the pages of a validator's single era are paid out,
the sum of commission paid to the validator across all pages should be
equal to what the commission would have been if we had a non-paged
exposure.

### Migration Note
Strictly speaking, we did not need to bump our storage version since
there is no migration of storage in this PR. But it is still useful to
mark a storage upgrade for the following reasons:

- New storage items are introduced in this PR while some older storage
items are deprecated.
- For the next `HistoryDepth` eras, the exposure would be incrementally
migrated to its corresponding paged storage item.
- Runtimes using staking pallet would strictly need to wait at least
`HistoryDepth` eras with current upgraded version (14) for the migration
to complete. At some era `E` such that `E >
era_at_which_V14_gets_into_effect + HistoryDepth`, we will upgrade to
version X which will remove the deprecated storage items.
In other words, it is a strict requirement that E<sub>x</sub> -
E<sub>14</sub> > `HistoryDepth`, where
E<sub>x</sub> = Era at which deprecated storages are removed from
runtime,
E<sub>14</sub> = Era at which runtime is upgraded to version 14.
- For Polkadot and Kusama, there is a [tracker
ticket](https://github.com/paritytech/polkadot-sdk/issues/433) to clean
up the deprecated storage items.

### Storage Changes

#### Added
- ErasStakersOverview
- ClaimedRewards
- ErasStakersPaged

#### Deprecated
The following can be cleaned up after 84 eras which is tracked
[here](https://github.com/paritytech/polkadot-sdk/issues/433).

- ErasStakers.
- ErasStakersClipped.
- StakingLedger.claimed_rewards, renamed to
StakingLedger.legacy_claimed_rewards.

### Config Changes
- Renamed MaxNominatorRewardedPerValidator to MaxExposurePageSize.

### TODO
- [x] Tracker ticket for cleaning up the old code after 84 eras.
- [x] Add companion.
- [x] Redo benchmarks before merge.
- [x] Add Changelog for pallet_staking.
- [x] Pallet should be configurable to enable/disable paged rewards.
- [x] Commission payouts are distributed across pages.
- [x] Review documentation thoroughly.
- [x] Rename `MaxNominatorRewardedPerValidator` ->
`MaxExposurePageSize`.
- [x] NMap for `ErasStakersPaged`.
- [x] Deprecate ErasStakers.
- [x] Integrity tests.

### Followup issues
[Runtime api for deprecated ErasStakers storage
item](https://github.com/paritytech/polkadot-sdk/issues/426

)

---------

Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: command-bot <>

Co-authored-by: Sergejs Kostjucenko <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

# Description

The `trigger_defensive` call has been added to the `root-testing`
pallet. The idea is to have this pallet running on `Rococo/Westend` and
use it to verify if the runtime monitoring works end-to-end.

To accomplish this, `trigger_defensive` dispatches an event when it is
called.

Closes #1953

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [ ] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)

You can remove the "Checklist" section once all have been checked. Thank
you for your contribution!

✄
-----------------------------------------------------------------------------

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Restore fix from #2077

This ensures that upgrading a parachain code sends the same event &
digest as when using `set_code` on a standalone chain.

Close: https://github.com/paritytech/polkadot-sdk/issues/2049

Partial https://github.com/paritytech/polkadot-sdk/issues/226



`frame/transaction-storage`: replace `Currency` with `fungible::*`
traits

---------

Signed-off-by: Adrian Catangiu <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>

Runtime migration CI is currently failing
(https://gitlab.parity.io/parity/mirrors/polkadot-sdk/builds/4122083)
for the contracts testnet due to unnecessary panicing in a `pre_upgrade`
hook.

Soon idempotency will be enforced
https://github.com/paritytech/try-runtime-cli/issues/42, in the mean
time we need to manually fix these issues as they arise.

---

also removes backticks from the string in `echo`, which caused a
'command not found' error in ci output

Closes https://github.com/paritytech/polkadot-sdk/issues/1970

Follow up issue to tackle, once the erroneous double
incrementing/decrementing has stopped:
https://github.com/paritytech/polkadot-sdk/issues/2037

Making some devex improvements as I audit our chains adherence to
try-state invariants, in preparation for automated try-state checks and
alerting.

Note to reviewer: while you're here, if you have time would be great to
get your eyes on https://github.com/paritytech/polkadot-sdk/pull/1297
also since it touches a similar file and I'd like to avoid merge
conflicts :P

## Devex Improvements

- Changes the log level of logs informing the user that try-state checks
are being run for a pallet from debug to info
- Improves how errors are communicated
- Errors are logged when they are encountered, rather than after
everything has been executed
- Exact pallet the error originated from is included with the error log
  - Clearly see all errors and how many there are, rather than only one
  - Closes #136 

### Example of new logs

<img width="1185" alt="Screenshot 2023-10-25 at 15 44 44"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/b75588a2-1c64-45df-bbc8-bcb8bf8b0fe0">

### Same but with old logs (run with RUST_LOG=debug)

Notice only informed of one of the errors, and it's unclear which pallet
it originated

<img width="1185" alt="Screenshot 2023-10-25 at 15 39 01"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/e3429cb1-489e-430a-9716-77c052e5dae6">
 

## Bug fix

When dry-running migrations and `checks.try_state()` is `true`, only run
`try_state` checks after migrations have been executed. Otherwise,
`try_state` checks that expect state to be in at a HIGHER storage
version than is on-chain could incorrectly fail.

---------

Co-authored-by: command-bot <>

Updates `docify` to 0.2.6, which fixes a bug that was preventing nesting
`#[docify::export]` within sub-items of items that already have
`#[docify::export]` attached to them from working properly.

Release notes here:
https://github.com/sam0x17/docify/releases/tag/v0.2.6

cc @ggwpez @Kianenigma

### Original PR https://github.com/paritytech/substrate/pull/14137

This PR brings in the first version of the "_`frame` umbrella crate_".
This crate is intended to serve two purposes:

1. documentation
2. easier development with frame. Ideally, we want most users to be able
to build a frame-based pallet and runtime using just `frame` (plus
`scale-codec` and `scale-info`).

The crate is not finalized and is not yet intended for external use.
Therefore, the version is set to `0.0.1-dev`, this PR is `silent`, and
the entire crate is hidden behind the `experimental` flag. The main
intention in merging it early on is to be able to iterate on it in the
rest of
[`developer-hub`](https://github.com/paritytech/polkadot-sdk-docs/)
efforts.

The public API of the `frame` crate is at the moment as follows: 

```
pub mod frame
pub use frame::log
pub use frame::pallet
pub mod frame::arithmetic
pub use frame::arithmetic::<<sp_arithmetic::*>>
pub use frame::arithmetic::<<sp_arithmetic::traits::*>>
pub mod frame::deps
pub use frame::deps::codec
pub use frame::deps::frame_executive
pub use frame::deps::frame_support
pub use frame::deps::frame_system
pub use frame::deps::scale_info
pub use frame::deps::sp_api
pub use frame::deps::sp_arithmetic
pub use frame::deps::sp_block_builder
pub use frame::deps::sp_consensus_aura
pub use frame::deps::sp_consensus_grandpa
pub use frame::deps::sp_core
pub use frame::deps::sp_inherents
pub use frame::deps::sp_io
pub use frame::deps::sp_offchain
pub use frame::deps::sp_runtime
pub use frame::deps::sp_std
pub use frame::deps::sp_version
pub mod frame::derive
pub use frame::derive::CloneNoBound
pub use frame::derive::Debug
pub use frame::derive::Debug
pub use frame::derive::DebugNoBound
pub use frame::derive::Decode
pub use frame::derive::Decode
pub use frame::derive::DefaultNoBound
pub use frame::derive::Encode
pub use frame::derive::Encode
pub use frame::derive::EqNoBound
pub use frame::derive::PartialEqNoBound
pub use frame::derive::RuntimeDebug
pub use frame::derive::RuntimeDebugNoBound
pub use frame::derive::TypeInfo
pub use frame::derive::TypeInfo
pub mod frame::prelude
pub use frame::prelude::<<frame_support::pallet_prelude::*>>
pub use frame::prelude::<<frame_system::pallet_prelude::*>>
pub use frame::prelude::<<sp_std::prelude::*>>
pub use frame::prelude::CloneNoBound
pub use frame::prelude::Debug
pub use frame::prelude::Debug
pub use frame::prelude::DebugNoBound
pub use frame::prelude::Decode
pub use frame::prelude::Decode
pub use frame::prelude::DefaultNoBound
pub use frame::prelude::Encode
pub use frame::prelude::Encode
pub use frame::prelude::EqNoBound
pub use frame::prelude::PartialEqNoBound
pub use frame::prelude::RuntimeDebug
pub use frame::prelude::RuntimeDebugNoBound
pub use frame::prelude::TypeInfo
pub use frame::prelude::TypeInfo
pub use frame::prelude::frame_system
pub mod frame::primitives
pub use frame::primitives::BlakeTwo256
pub use frame::primitives::H160
pub use frame::primitives::H256
pub use frame::primitives::H512
pub use frame::primitives::Hash
pub use frame::primitives::Keccak256
pub use frame::primitives::U256
pub use frame::primitives::U512
pub mod frame::runtime
pub mod frame::runtime::apis
pub use frame::runtime::apis::<<frame_system_rpc_runtime_api::*>>
pub use frame::runtime::apis::<<sp_api::*>>
pub use frame::runtime::apis::<<sp_block_builder::*>>
pub use frame::runtime::apis::<<sp_consensus_aura::*>>
pub use frame::runtime::apis::<<sp_consensus_grandpa::*>>
pub use frame::runtime::apis::<<sp_offchain::*>>
pub use frame::runtime::apis::<<sp_session::runtime_api::*>>
pub use frame::runtime::apis::<<sp_transaction_pool::runtime_api::*>>
pub use frame::runtime::apis::ApplyExtrinsicResult
pub use frame::runtime::apis::CheckInherentsResult
pub use frame::runtime::apis::InherentData
pub use frame::runtime::apis::OpaqueMetadata
pub use frame::runtime::apis::impl_runtime_apis
pub use frame::runtime::apis::sp_api
pub mod frame::runtime::prelude
pub use frame::runtime::prelude::<<frame_executive::*>>
pub use frame::runtime::prelude::ConstBool
pub use frame::runtime::prelude::ConstI128
pub use frame::runtime::prelude::ConstI16
pub use frame::runtime::prelude::ConstI32
pub use frame::runtime::prelude::ConstI64
pub use frame::runtime::prelude::ConstI8
pub use frame::runtime::prelude::ConstU128
pub use frame::runtime::prelude::ConstU16
pub use frame::runtime::prelude::ConstU32
pub use frame::runtime::prelude::ConstU64
pub use frame::runtime::prelude::ConstU8
pub use frame::runtime::prelude::NativeVersion
pub use frame::runtime::prelude::RuntimeVersion
pub use frame::runtime::prelude::construct_runtime
pub use frame::runtime::prelude::create_runtime_str
pub use frame::runtime::prelude::derive_impl
pub use frame::runtime::prelude::frame_support
pub use frame::runtime::prelude::ord_parameter_types
pub use frame::runtime::prelude::parameter_types
pub use frame::runtime::prelude::runtime_version
pub mod frame::runtime::testing_prelude
pub use frame::runtime::testing_prelude::BuildStorage
pub use frame::runtime::testing_prelude::Storage
pub mod frame::runtime::types_common
pub type frame::runtime::types_common::AccountId = <<frame::runtime::types_common::Signature as sp_runtime::traits::Verify>::Signer as sp_runtime::traits::IdentifyAccount>::AccountId
pub type frame::runtime::types_common::BlockNumber = u32
pub type frame::runtime::types_common::BlockOf<T, Extra> = sp_runtime::generic::block::Block<sp_runtime::generic::header::Header<frame::runtime::types_common::BlockNumber, sp_runtime::traits::BlakeTwo256>, sp_runtime::generic::unchecked_extrinsic::UncheckedExtrinsic<sp_runtime::multiaddress::MultiAddress<frame::runtime::types_common::AccountId, ()>, <T as frame_system::pallet::Config>::RuntimeCall, frame::runtime::types_common::Signature, Extra>>
pub type frame::runtime::types_common::OpaqueBlock = sp_runtime::generic::block::Block<sp_runtime::generic::header::Header<frame::runtime::types_common::BlockNumber, sp_runtime::traits::BlakeTwo256>, sp_runtime::OpaqueExtrinsic>
pub type frame::runtime::types_common::Signature = sp_runtime::MultiSignature
pub type frame::runtime::types_common::SystemSignedExtensionsOf<T> = (frame_system::extensions::check_non_zero_sender::CheckNonZeroSender<T>, frame_system::extensions::check_spec_version::CheckSpecVersion<T>, frame_system::extensions::check_tx_version::CheckTxVersion<T>, frame_system::extensions::check_genesis::CheckGenesis<T>, frame_system::extensions::check_mortality::CheckMortality<T>, frame_system::extensions::check_nonce::CheckNonce<T>, frame_system::extensions::check_weight::CheckWeight<T>)
pub mod frame::testing_prelude
pub use frame::testing_prelude::<<frame_executive::*>>
pub use frame::testing_prelude::<<frame_system::mocking::*>>
pub use frame::testing_prelude::BuildStorage
pub use frame::testing_prelude::ConstBool
pub use frame::testing_prelude::ConstI128
pub use frame::testing_prelude::ConstI16
pub use frame::testing_prelude::ConstI32
pub use frame::testing_prelude::ConstI64
pub use frame::testing_prelude::ConstI8
pub use frame::testing_prelude::ConstU128
pub use frame::testing_prelude::ConstU16
pub use frame::testing_prelude::ConstU32
pub use frame::testing_prelude::ConstU64
pub use frame::testing_prelude::ConstU8
pub use frame::testing_prelude::NativeVersion
pub use frame::testing_prelude::RuntimeVersion
pub use frame::testing_prelude::Storage
pub use frame::testing_prelude::TestState
pub use frame::testing_prelude::assert_err
pub use frame::testing_prelude::assert_err_ignore_postinfo
pub use frame::testing_prelude::assert_error_encoded_size
pub use frame::testing_prelude::assert_noop
pub use frame::testing_prelude::assert_ok
pub use frame::testing_prelude::assert_storage_noop
pub use frame::testing_prelude::construct_runtime
pub use frame::testing_prelude::create_runtime_str
pub use frame::testing_prelude::derive_impl
pub use frame::testing_prelude::frame_support
pub use frame::testing_prelude::frame_system
pub use frame::testing_prelude::if_std
pub use frame::testing_prelude::ord_parameter_types
pub use frame::testing_prelude::parameter_types
pub use frame::testing_prelude::runtime_version
pub use frame::testing_prelude::storage_alias
pub mod frame::traits
pub use frame::traits::<<frame_support::traits::*>>
pub use frame::traits::<<sp_runtime::traits::*>>
```

---

The road to full stabilization is

- [ ] https://github.com/paritytech/polkadot-sdk/issues/127


- [ ] have a more intentional version bump, as opposed to the current bi
weekly force-major-bump
- [ ] revise the internal API of `frame`, especially what goes into the
`prelude`s.
- [ ] migrate all internal pallets and runtime to use `frame`

---------

Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

Updates `docify` to 0.2.5, which fixes some indentation bugs and adds
the new `#[docify::export_content]` attribute which can be used like
regular `#[docify::export]` but will only export the _underlying
contents_ of the item it is attached to, if applicable (otherwise it
just behaves exactly like `#[docify::export]`).

Release notes here:
https://github.com/sam0x17/docify/releases/tag/v0.2.5

cc @Kianenigma

the min slot duration should be 0 only if the `experimental` feature is
enabled. otherwise, the runtime will panic on a division by 0.

# Description

- What does this PR do?

While working with `pallet_nfts` through `nonfungibles_v2` traits
`Inspect, Mutate`, I found out that once you have set the collection
attribute with `<Nfts as Mutate>::set_collection_attribute()`, it's not
possible to read it with `<Nfts as Inspect>::collection_attribute()`
since they use different `namespace` values. When setting the attribute,
`AttributeNamespace::Pallet` is used, while
`AttributeNamespace::CollectionOwner` is used when reading.

more context:
https://github.com/freeverseio/laos/issues/7#issuecomment-1766137370

This PR makes `item` an optional parameter in
`Inspect::system_attribute()`, to be able to read collection attributes.

- Why are these changes needed?

To be able to read collection level attributes when reading attributes
of the collection. It will be possible to read collection attributes by
passing `None` for `item`

- How were these changes implemented and what do they affect?

`NftsApi` is also affected and `NftsApi::system_attribute()` now accepts
optional `item` parameter.

## Breaking change

Because of the change in the `NftsApi::system_attribute()` method's
`item` param, parachains who integrated the `NftsApi` need to update
their API code and frontend integrations accordingly. AssetHubs are
unaffected since the NftsApi wasn't released on those parachains yet.

so we can use it in our tests

Project that includes pallet-contracts via crates.io will fail to run 
```bash
cargo check --features=runtime-benchmarks
```

without the currently not included benchmarks files

Adds a config file that allows to run `zepter` without any arguments in
the workspace to address all issues.
A secondary workflow for the CI is provided as `zepter run check`. Both
the formatting and linting are now in one check for efficiancy.

The latest version also detects some more things that `featalign` was
already showing.

Error message [in the
CI](https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/3916205)
now looks like this:
```pre
...
crate 'test-parachains' (/Users/vados/Documents/work/polkadot-sdk/polkadot/parachain/test-parachains/Cargo.toml)
  feature 'std'
    must propagate to:
      parity-scale-codec
Found 55 issues (run with --fix to fix).
Error: Command 'lint propagate-feature' failed with exit code 1

Polkadot-SDK uses the Zepter CLI to detect abnormalities in the feature configuration.
It looks like one more more checks failed; please check the console output. You can try to automatically address them by running `zepter`.
Otherwise please ask directly in the Merge Request, GitHub Discussions or on Matrix Chat, thank you.

For more information, see:
  - https://github.com/paritytech/polkadot-sdk/issues/1831
  - https://github.com/ggwpez/zepter


```

TODO:
- [x] Check that CI fails correctly

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

Fixes #179 

# Description

This PR makes the structure containing identity information used in
`pallet-identity` generic through the pallet `Config`. Additionally, the
old structure is now available in a separate module called `simple`
(pending rename) and is compatible with the new interface.

Another change in this PR is that while the `additional` field in
`IdentityInfo` stays for backwards compatibility reasons, the associated
costs are stil present in the pallet through the `additional` function
in the `IdentityInformationProvider` interface. This function is marked
as deprecated as it is only a temporary solution to the backwards
compatibility problem we had. In short, we could have removed the
additional fields in the struct and done a migration, but we chose to
wait and do it off-chain through the genesis of the system parachain.
After we move the identity pallet to the parachain, additional fields
will be migrated into the existing fields and the `additional` key-value
store will be removed. Until that happens, this interface will provide
the necessary information to properly account for the associated costs.

Additionally, this PR fixes an unrelated issue; the `IdentityField` enum
used to represent the fields as bitflags couldn't store more than 8
fields, even though it was marked as `#[repr(u64)]`. This was because of
the `derive` implementation of `TypeInfo`, which assumed `u8` semantics.
The custom implementation of this trait in
https://github.com/paritytech/polkadot-sdk/commit/0105cc0396b7a53d0b290f48b1225847f6d17321


fixes the issue.

---------

Signed-off-by: georgepisaltu <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: joe petrowski <[email protected]>

closes https://github.com/paritytech/polkadot-sdk/issues/1882



## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

This adds more logging to `CheckWeight` to get a better understanding
why a transaction exhausts resources.

Implements the `OnUnbalanced` trait to resolve received credits to the
specified account. Credits that fail to resolve are dropped.

### Motivation 
Throughout the codebase, several types implement the trait with the same
behavior. While some currently utilize older currency trait, a migration
to the new fungible/s is anticipated for all. Examples:
[1](https://github.com/paritytech/polkadot-sdk/blob/1b34571c0c423115813034783ddf524aac257bf5/cumulus/parachains/common/src/impls.rs#L37),
[2](https://github.com/paritytech/polkadot-sdk/blob/1b34571c0c423115813034783ddf524aac257bf5/polkadot/runtime/common/src/impls.rs#L36),
[3](https://github.com/paritytech/polkadot-sdk/blob/1b34571c0c423115813034783ddf524aac257bf5/substrate/bin/node/runtime/src/impls.rs#L40),
[4](https://github.com/paritytech/polkadot-sdk/blob/1b34571c0c423115813034783ddf524aac257bf5/substrate/bin/node/runtime/src/lib.rs#L1969),
[5](https://github.com/paritytech/polkadot-sdk/blob/1b34571c0c423115813034783ddf524aac257bf5/substrate/frame/broker/src/mock.rs#L198),
[6](https://github.com/paritytech/polkadot-sdk/blob/1b34571c0c423115813034783ddf524aac257bf5/substrate/frame/society/src/lib.rs#L2031),
[7](https://github.com/paritytech/polkadot-sdk/blob/1b34571c0c423115813034783ddf524aac257bf5/substrate/frame/treasury/src/lib.rs#L1118)

The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.

This requires: https://github.com/paritytech/scale-info/pull/197



---------

Co-authored-by: Francisco Aguirre <[email protected]>

Changes:
- Use a sensible limit for the overweight-cutoff of a single messages
instead of the full configured `ServiceWeight`.
- Add/Update tests

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.

This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.

The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.

XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).

# Note for reviewers

Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration

# Important note

After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!

Wallet UIs that want to expose the new delivery fee can do so using the
formula:

```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```

where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Giles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

I have added some Traits that are missing and are useful for dealing
with non-fungible tokens on other pallets and their implementations for
NFTs pallet.

- In the Mutate trait, added methods for dealing with the metadata:
`set_metadata`, `set_collection_metadata`, `clear_metadata` and
`clear_collection_metadata`.
The motivation of adding this methods coming from a StackExchange
question asking for it: [Setting metadata of an item of the Nfts pallet
in a custom
pallet](https://substrate.stackexchange.com/questions/9974/setting-metadata-of-an-item-of-the-nfts-pallet-in-a-custom-pallet)

- A Trait for trading non-fungible items. The methods in that Trait are
`buy_item`, `set_price` and `item_price`
An example of where this Trait can be useful is a pallet that deals with
[NFT
Royalties](https://forum.polkadot.network/t/nfts-royalty-pallet/3766

)
and needs to perform this actions.

---------

Co-authored-by: Jegor Sidorenko <[email protected]>

Closes https://github.com/paritytech/polkadot-sdk/issues/1916

Changes:
- Trivially wrap the migration into a version migration to enforce
idempotency.
- Opinionated logging nits

@liamaharon maybe we can add a check to the `try-runtime-cli` that
migrations are idempotent? It should be possible to check that the
storage root is identical after executing a second time (and that it
does not panic like it did here 😆

).

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

Slightly less verbose use of fungible(s).

---------

Co-authored-by: Liam Aharon <[email protected]>

## Summary

This PR introduces several enhancements.

The current implementation of `NetworkExportTable` lacks remote location
filtering support beyond `NetworkId` lookup. To provide more control and
granularity, it's essential to allow configuration for bridging to
different consensus `NetworkId` while restricting access e.g. to
particular remote parachains.

Additionally, the `StartsWith` and `Equals` and
`StartsWithExplicitGlobalConsensus` helper functions, which are in
active use, are moved to the `xcm-builder` and `frame_support` modules
for better code organization.

Adds a new `LocationWithAssetFilters` filter to enable location-based
and asset-related filtering. This filter is useful for configuring the
`pallet_xcm` filter for
[XcmTeleportFilter](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/pallet-xcm/src/lib.rs#L212)
and
[XcmReserveTransferFilter](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/pallet-xcm/src/lib.rs#L216

)
to restrict specific assets.

Furthermore, the `BridgeMessage` fields are not accessible outside of
`xcm-builder`, limiting the ability to create custom logic dependent on
it.

---------

Co-authored-by: Francisco Aguirre <[email protected]>

Just making a few hidden imports cleaner and hidden in docs.

---------

Co-authored-by: Keith Yeung <[email protected]>

Allow Locks/Holds/Reserves/Freezes by default when using `pallet_balances` `TestDefaultConfig` (#1880)

Allow Locks/Holds/Reserves/Freezes by default when using
`pallet_balances` `TestDefaultConfig`.

Introduces an `extract` amount method for `fungible/s` `Imbalance`.

This PR refactors the staking ledger logic to encapsulate all reads and
mutations of `Ledger`, `Bonded`, `Payee` and stake locks within the
`StakingLedger` struct implementation.

With these changes, all the reads and mutations to the `Ledger`, `Payee`
and `Bonded` storage map should be done through the methods exposed by
StakingLedger to ensure the data and lock consistency of the operations.
The new introduced methods that mutate and read Ledger are:

- `ledger.update()`: inserts/updates a staking ledger in storage;
updates staking locks accordingly (and ledger.bond(), which is synthatic
sugar for ledger.update())
- `ledger.kill()`: removes all Bonded and StakingLedger related data for
a given ledger; updates staking locks accordingly;
`StakingLedger::get(account)`: queries both the `Bonded` and `Ledger`
storages and returns a `Option<StakingLedger>`. The pallet impl exposes
fn ledger(account) as synthatic sugar for `StakingLedger::get(account)`.

Retrieving a ledger with `StakingLedger::get()` can be done by providing
either a stash or controller account. The input must be wrapped in a
`StakingAccount` variant (Stash or Controller) which is treated
accordingly. This simplifies the caller API but will eventually be
deprecated once we completely get rid of the controller account in
staking. However, this refactor will help with the work necessary when
completely removing the controller.

Other goals:

- No logical changes have been introduced in this PR;
- No breaking changes or updates in wallets required;
- No new storage items or need to perform storage migrations;
- Centralise the changes to bonds and ledger updates to simplify the
OnStakingUpdate updates to the target list (related to
https://github.com/paritytech/polkadot-sdk/issues/443)

Note: it would be great to prevent or at least raise a warning if
`Ledger<T>`, `Payee<T>` and `Bonded<T>` storage types are accessed
outside the `StakingLedger` implementation. This PR should not get
blocked by that feature, but there's a tracking issue here
https://github.com/paritytech/polkadot-sdk/issues/149

Related and step towards
https://github.com/paritytech/polkadot-sdk/issues/443

# Description
- What does this PR do?
  - link added
- Why are these changes needed?
  - improve docs
- How were these changes implemented and what do they affect?
  - only concerns docs

closes #622 

Pros:
* simpler interface, just functions:
`create_runtime_from_artifact_bytes()` and `execute_artifact()`

Cons:
* extra overhead of constructing executor semantics each time

I could make it a combination of
* `create_runtime_config(params)` (such that we could clone the
constructed semantics)
* `create_runtime(blob, config)`
* `execute_artifact(blob, config, params)`

Not sure if it's worth it though.

---------

Co-authored-by: Bastian Köcher <[email protected]>