Adds a `NodeFeatures` bitfield value to the runtime `HostConfiguration`,
with the purpose of coordinating the enabling of node-side features,
such as: https://github.com/paritytech/polkadot-sdk/issues/628 and
https://github.com/paritytech/polkadot-sdk/issues/598.
These are features that require all validators enable them at the same
time, assuming all/most nodes have upgraded their node versions.

This PR doesn't add any feature yet. These are coming in future PRs.

Also adds a runtime API for querying the state of the client features
and an extrinsic for setting/unsetting a feature by its index in the bitfield.

Note: originally part of:
https://github.com/paritytech/polkadot-sdk/pull/1644, but posted as
standalone to be reused by other PRs until the initial PR is merged

## Motivation

`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.

While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.

## Solution

This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.

Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.

All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.

#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).

Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>

Remove the `GRANDPA_AUTHORITIES_KEY` key and its usage. Apparently this
was used in the early days to communicate the grandpa authorities to the
node. However, we have now a runtime api that does this for us. So, this
pull request is moving from the custom managed storage item to a FRAME
managed storage item.

This pr also includes a migration for doing the switch on a running
chain.

---------

Co-authored-by: Davide Galassi <[email protected]>

We are introducing a new set of `XcmController` traits (final name yet
to be determined).
These traits are implemented by `pallet-xcm` and allows other pallets,
such as `pallet_contracts`, to rely on these traits instead of tight
coupling them to `pallet-xcm`.

Using only the existing Xcm traits would mean duplicating the logic from
`pallet-xcm` in these other pallets, which we aim to avoid. Our
objective is to ensure that when these APIs are called from
`pallet-contracts`, they produce the exact same outcomes as if called
directly from `pallet-xcm`.

The other benefits is that we can also expose return values to
`pallet-contracts` instead of just calling `pallet-xcm` dispatchable and
getting a `DispatchResult` back.

See traits integration in this PR
https://github.com/paritytech/polkadot-sdk/pull/1248, where the traits
are used as follow to define and implement `pallet-contracts` Config.
```rs
// Contracts config:
pub trait Config: frame_system::Config {
  // ...

  /// A type that exposes XCM APIs, allowing contracts to interact with other parachains, and
  /// execute XCM programs.
  type Xcm: xcm_executor::traits::Controller<
	  OriginFor<Self>,
	  <Self as frame_system::Config>::RuntimeCall,
	  BlockNumberFor<Self>,
  >;
}

// implementation
impl pallet_contracts::Config for Runtime {
        // ...

	type Xcm = pallet_xcm::Pallet<Self>;
}
```

---------

Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: command-bot <>

As suggested by @ggwpez
(https://github.com/paritytech/polkadot-sdk/pull/2142#discussion_r1388145872),
remove the `VersionChecked` prefix from version checked migrations (but
leave `VersionUnchecked` prefixes)

---------

Co-authored-by: command-bot <>

Changes:
- Adds a new call `remove_key` to the sudo pallet to permanently remove
the sudo key.
- Remove some clones and general maintenance

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>

This PR exposes a `force_remove_vesting` through a ROOT call. 
See linked
[issue](https://github.com/paritytech/polkadot-sdk/issues/269)

---------

Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Dónal Murray <[email protected]>

This PR updates the version of `serde_json` to `1.0.108` throughout the
codebase.

This PR is a follow up to #1661 

- [x] rename the `simple` module to `legacy`
- [x] fix benchmarks to disregard the number of additional fields
- [x] change the storage deposits to charge per encoded byte of the
identity information instance, removing the need for `fn
additional(&self) -> usize` in `IdentityInformationProvider`
- [x] ~add an extrinsic to rejig deposits to account for the change
above~
- [ ] ~ensure through proper configuration that the new byte-based
deposit is always lower than whatever is reserved now~
- [x] remove `IdentityFields` from the `set_fields` extrinsic signature,
as per [this
discussion](https://github.com/paritytech/polkadot-sdk/pull/1661#discussion_r1371703403)

> ensure through proper configuration that the new byte-based deposit is
always lower than whatever is reserved now

Not sure this is needed anymore. If the new deposits are higher than
what is currently on chain and users don't have enough funds to reserve
what is needed, the extrinisc fails and they're basically grandfathered
and frozen until they add more funds and/or make a change to their
identity. This behavior seems fine to me. Original idea
[here](https://github.com/paritytech/polkadot-sdk/pull/1661#issuecomment-1779606319).

> add an extrinsic to rejig deposits to account for the change above

This was initially implemented but now removed from this PR in favor of
the implementation detailed
[here](https://github.com/paritytech/polkadot-sdk/pull/2088).

---------

Signed-off-by: georgepisaltu <[email protected]>
Co-authored-by: joepetrowski <[email protected]>

helps https://github.com/paritytech/polkadot-sdk/issues/439.
closes https://github.com/paritytech/polkadot-sdk/issues/473.

PR link in the older substrate repository:
https://github.com/paritytech/substrate/pull/13498.

# Context
Rewards payout is processed today in a single block and limited to
`MaxNominatorRewardedPerValidator`. This number is currently 512 on both
Kusama and Polkadot.

This PR tries to scale the nominators payout to an unlimited count in a
multi-block fashion. Exposures are stored in pages, with each page
capped to a certain number (`MaxExposurePageSize`). Starting out, this
number would be the same as `MaxNominatorRewardedPerValidator`, but
eventually, this number can be lowered through new runtime upgrades to
limit the rewardeable nominators per dispatched call instruction.

The changes in the PR are backward compatible.

## How payouts would work like after this change
Staking exposes two calls, 1) the existing `payout_stakers` and 2)
`payout_stakers_by_page`.

### payout_stakers
This remains backward compatible with no signature change. If for a
given era a validator has multiple pages, they can call `payout_stakers`
multiple times. The pages are executed in an ascending sequence and the
runtime takes care of preventing double claims.

### payout_stakers_by_page
Very similar to `payout_stakers` but also accepts an extra param
`page_index`. An account can choose to payout rewards only for an
explicitly passed `page_index`.

**Lets look at an example scenario**
Given an active validator on Kusama had 1100 nominators,
`MaxExposurePageSize` set to 512 for Era e. In order to pay out rewards
to all nominators, the caller would need to call `payout_stakers` 3
times.

- `payout_stakers(origin, stash, e)` => will pay the first 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the second set of 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the last set of 76
nominators.
...
- `payout_stakers(origin, stash, e)` => calling it the 4th time would
return an error `InvalidPage`.

The above calls can also be replaced by `payout_stakers_by_page` and
passing a `page_index` explicitly.

## Commission note
Validator commission is paid out in chunks across all the pages where
each commission chunk is proportional to the total stake of the current
page. This implies higher the total stake of a page, higher will be the
commission. If all the pages of a validator's single era are paid out,
the sum of commission paid to the validator across all pages should be
equal to what the commission would have been if we had a non-paged
exposure.

### Migration Note
Strictly speaking, we did not need to bump our storage version since
there is no migration of storage in this PR. But it is still useful to
mark a storage upgrade for the following reasons:

- New storage items are introduced in this PR while some older storage
items are deprecated.
- For the next `HistoryDepth` eras, the exposure would be incrementally
migrated to its corresponding paged storage item.
- Runtimes using staking pallet would strictly need to wait at least
`HistoryDepth` eras with current upgraded version (14) for the migration
to complete. At some era `E` such that `E >
era_at_which_V14_gets_into_effect + HistoryDepth`, we will upgrade to
version X which will remove the deprecated storage items.
In other words, it is a strict requirement that E<sub>x</sub> -
E<sub>14</sub> > `HistoryDepth`, where
E<sub>x</sub> = Era at which deprecated storages are removed from
runtime,
E<sub>14</sub> = Era at which runtime is upgraded to version 14.
- For Polkadot and Kusama, there is a [tracker
ticket](https://github.com/paritytech/polkadot-sdk/issues/433) to clean
up the deprecated storage items.

### Storage Changes

#### Added
- ErasStakersOverview
- ClaimedRewards
- ErasStakersPaged

#### Deprecated
The following can be cleaned up after 84 eras which is tracked
[here](https://github.com/paritytech/polkadot-sdk/issues/433).

- ErasStakers.
- ErasStakersClipped.
- StakingLedger.claimed_rewards, renamed to
StakingLedger.legacy_claimed_rewards.

### Config Changes
- Renamed MaxNominatorRewardedPerValidator to MaxExposurePageSize.

### TODO
- [x] Tracker ticket for cleaning up the old code after 84 eras.
- [x] Add companion.
- [x] Redo benchmarks before merge.
- [x] Add Changelog for pallet_staking.
- [x] Pallet should be configurable to enable/disable paged rewards.
- [x] Commission payouts are distributed across pages.
- [x] Review documentation thoroughly.
- [x] Rename `MaxNominatorRewardedPerValidator` ->
`MaxExposurePageSize`.
- [x] NMap for `ErasStakersPaged`.
- [x] Deprecate ErasStakers.
- [x] Integrity tests.

### Followup issues
[Runtime api for deprecated ErasStakers storage
item](https://github.com/paritytech/polkadot-sdk/issues/426)

---------

Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: command-bot <>

# Description

The `trigger_defensive` call has been added to the `root-testing`
pallet. The idea is to have this pallet running on `Rococo/Westend` and
use it to verify if the runtime monitoring works end-to-end.

To accomplish this, `trigger_defensive` dispatches an event when it is
called.

Closes #1953

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [ ] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)

You can remove the "Checklist" section once all have been checked. Thank
you for your contribution!

✄
-----------------------------------------------------------------------------

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Closes https://github.com/paritytech/release-engineering/issues/6

Adds a new Github Workflow which on a new release being created, builds
and attaches all runtimes managed in this repository in two flavours:
- `dev-debug-build`: Built with the `try-runtime` feature and has
logging enabled
- `on-chain-release`: Built with the regular old `on-chain-release`
feature

The new Github Workflow could be extended in the future by the
@paritytech/release-engineering team to fully automate the release
process if they choose to, similar to how it is fully automated in the
Fellowship repo
(https://github.com/polkadot-fellows/runtimes/blob/main/.github/workflows/release.yml).

The `on-chain-release` did not exist for parachains, so I added it. 

---

Tested on my fork: 
- https://github.com/liamaharon/polkadot-sdk/actions/runs/6663773523
- https://github.com/liamaharon/polkadot-sdk/releases/tag/test-6

---------

Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

Fixes #179 

# Description

This PR makes the structure containing identity information used in
`pallet-identity` generic through the pallet `Config`. Additionally, the
old structure is now available in a separate module called `simple`
(pending rename) and is compatible with the new interface.

Another change in this PR is that while the `additional` field in
`IdentityInfo` stays for backwards compatibility reasons, the associated
costs are stil present in the pallet through the `additional` function
in the `IdentityInformationProvider` interface. This function is marked
as deprecated as it is only a temporary solution to the backwards
compatibility problem we had. In short, we could have removed the
additional fields in the struct and done a migration, but we chose to
wait and do it off-chain through the genesis of the system parachain.
After we move the identity pallet to the parachain, additional fields
will be migrated into the existing fields and the `additional` key-value
store will be removed. Until that happens, this interface will provide
the necessary information to properly account for the associated costs.

Additionally, this PR fixes an unrelated issue; the `IdentityField` enum
used to represent the fields as bitflags couldn't store more than 8
fields, even though it was marked as `#[repr(u64)]`. This was because of
the `derive` implementation of `TypeInfo`, which assumed `u8` semantics.
The custom implementation of this trait in
https://github.com/paritytech/polkadot-sdk/commit/0105cc03


fixes the issue.

---------

Signed-off-by: georgepisaltu <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: joe petrowski <[email protected]>

closes https://github.com/paritytech/polkadot-sdk/issues/1882

## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Reverts https://github.com/paritytech/polkadot-sdk/pull/1476

The `lock_pallet` / `unlock_pallet` additions in
https://github.com/paritytech/polkadot-sdk/pull/1814 will result in less
downtime for users than using runtime upgrades.

## Problem

This PR addresses the issue with testnet AssetHub builds, which was
discovered during the execution of `bot bench`.

https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038738
```
     Compiling asset-hub-rococo-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-rococo-runtime)
  warning: Linking globals named 'Core_version': symbol multiply defined!
  error: failed to load bitcode of module "rococo_runtime-8799ee884447805a.rococo_runtime.0bc572b8-cgu.0.rcgu.o": 
  warning: `asset-hub-rococo-runtime-wasm` (lib) generated 1 warning
  error: could not compile `asset-hub-rococo-runtime-wasm` (lib) due to previous error; 1 warning emitted
```

https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038739
```
Compiling asset-hub-westend-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-westend-runtime)
  warning: Linking globals named 'Core_version': symbol multiply defined!
  error: failed to load bitcode of module "westend_runtime-86d7844430f97d5c.westend_runtime.b7678d03-cgu.0.rcgu.o": 
  warning: `asset-hub-westend-runtime-wasm` (lib) generated 1 warning
  error: could not compile `asset-hub-westend-runtime-wasm` (lib) due to previous error; 1 warning emitted
```

## Solution

- Removed dependencies on `rococo-runtime` and `westend-runtime`
introduced by [this
PR](https://github.com/paritytech/polkadot-sdk/pull/1234/files#diff-a86375df98e04ca3cce1ea35c40257a222e2d5087f5f528ff33307678b78dc2dR534-R550).
- Replaced `<rococo_runtime::Treasury as PalletInfoAccess>::index()`
with `rococo_runtime_constants::TREASURY_PALLET_ID`.
- Added `check_treasury_pallet_id` to the relay runtimes to ensure that
the constant is aligned with the pallet id.
- Added "Rococo Treasury" to the waived locations (that will not be
charged fees in the executor) for `BridgeHubRococo` (to be aligned with
AssetHubs).

## References

[Full element discussion
here](https://matrix.to/#/!JUeaZUiYbdrvzvtwSL:parity.io/$2PnjYMsWRjR7M3oOfGuRI0XkjdoqJLtRcAPVcDLuLVg?via=parity.io&via=web3.foundation).

---------

Co-authored-by: command-bot <>

The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.

This requires: https://github.com/paritytech/scale-info/pull/197

---------

Co-authored-by: Francisco Aguirre <[email protected]>

Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.

This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.

The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.

XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).

# Note for reviewers

Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration

# Important note

After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!

Wallet UIs that want to expose the new delivery fee can do so using the
formula:

```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```

where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Giles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

Adds descriptions needed for publishing to crates.io.

cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add asset-bridging support to it (#1215)

This commit adds Rococo Asset Hub dedicated runtime so we can test new
features here, before merging them in Kusama Asset Hub.
Also adds one such feature: asset transfer over bridge (Rococo AssetHub
<> Wococo AssetHub)

- clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime`
- make it use Rococo primitives, names, assets, constants, etc
- add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo
AssetHub

Fixes #1128

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

Exposes disabled validators list via a runtime API.

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: ordian <[email protected]>

[xcm] Use `Weight::MAX` for `reserve_asset_deposited`, `receive_teleported_asset` benchmarks (#1726)

# Description

## Summary

Previously, the `pallet_xcm::do_reserve_transfer_assets` and
`pallet_xcm::do_teleport_assets` functions relied on weight estimation
for remote chain execution, which was based on guesswork derived from
the local chain. This approach led to complications for runtimes that
did not provide or support specific [XCM
configurations](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76/polkadot/xcm/xcm-executor/src/config.rs#L43-L47)
for `IsReserve` or `IsTeleporter`. Consequently, such runtimes had to
resort to implementing hard-coded weights for XCM instructions like
`reserve_asset_deposited` or `receive_teleported_asset` to support
extrinsics such as `pallet_xcm::reserve_transfer_assets` and
`pallet_xcm::teleport_assets`, which depended on remote weight
estimation.

The issue of remote weight estimation was addressed and resolved by
[Pull Request
#1645](https://github.com/paritytech/polkadot-sdk/pull/1645), which
removed the need for remote weight estimation.

## Solution

As a continuation of this improvement, the current PR proposes further
cleanup by removing unnecessary hard-coded values and rectifying
benchmark results with `Weight::MAX` that previously used
`T::BlockWeights::get().max_block` as an override for unsupported XCM
instructions like `ReserveAssetDeposited` and `ReceiveTeleportedAsset`.


## Questions

- [x] Can we remove now also `Hardcoded till the XCM pallet is fixed`
for `deposit_asset`? E.g. for AssetHubKusama
[here](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76/cumulus/parachains/runtimes/assets/asset-hub-kusama/src/weights/xcm/mod.rs#L129-L134)
- [x] Are comments like
[this](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76/polkadot/runtime/kusama/src/weights/xcm/mod.rs#L94)
`// Kusama doesn't support ReserveAssetDeposited, so this benchmark has
a default weight` still relevant? Shouldnt be removed/changed?


## TODO

- [x] `bench bot` regenerate xcm weights for all runtimes
- [x] remove hard-coded stuff from system parachain weight files
- [ ] when merged, open `polkadot-fellow/runtimes` PR

## References

Fixes #1132
Closes #1132
Old polkadot repo [PR](https://github.com/paritytech/polkadot/pull/7546)

---------

Co-authored-by: command-bot <>

### Summary 

This PR introduces new dispatchables to the treasury pallet, allowing
spends of various asset types. The enhanced features of the treasury
pallet, in conjunction with the asset-rate pallet, are set up and
enabled for Westend and Rococo.

### Westend and Rococo runtimes.

Polkadot/Kusams/Rococo Treasury can accept proposals for `spends` of
various asset kinds by specifying the asset's location and ID.

#### Treasury Instance New Dispatchables:
- `spend(AssetKind, AssetBalance, Beneficiary, Option<ValidFrom>)` -
propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

in this context, the `AssetKind` parameter contains the asset's location
and it's corresponding `asset_id`, for example:
`USDT` on `AssetHub`,
``` rust
location = MultiLocation(0, X1(Parachain(1000)))
asset_id = MultiLocation(0, X2(PalletInstance(50), GeneralIndex(1984)))
```

the `Beneficiary` parameter is a `MultiLocation` in the context of the
asset's location, for example
``` rust
// the Fellowship salary pallet's location / account
FellowshipSalaryPallet = MultiLocation(1, X2(Parachain(1001), PalletInstance(64)))
// or custom `AccountId`
Alice = MultiLocation(0, AccountId32(network: None, id: [1,...]))
```

the `AssetBalance` represents the amount of the `AssetKind` to be
transferred to the `Beneficiary`. For permission checks, the asset
amount is converted to the native amount and compared against the
maximum spendable amount determined by the commanding spend origin.

the `spend` dispatchable allows for batching spends with different
`ValidFrom` arguments, enabling milestone-based spending. If the
expectations tied to an approved spend are not met, it is possible to
void the spend later using the `void_spend` dispatchable.

Asset Rate Pallet provides the conversion rate from the `AssetKind` to
the native balance.

#### Asset Rate Instance Dispatchables:
- `create(AssetKind, Rate)` - initialize a conversion rate to the native
balance for the given asset
- `update(AssetKind, Rate)` - update the conversion rate to the native
balance for the given asset
- `remove(AssetKind)` - remove an existing conversion rate to the native
balance for the given asset

the pallet's dispatchables can be executed by the Root or Treasurer
origins.

### Treasury Pallet

Treasury Pallet can accept proposals for `spends` of various asset kinds
and pay them out through the implementation of the `Pay` trait.

New Dispatchables:
- `spend(Config::AssetKind, AssetBalance, Config::Beneficiary,
Option<ValidFrom>)` - propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout;
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

The parameters' types of the `spend` dispatchable exposed via the
pallet's `Config` and allows to propose and accept a spend of a certain
amount.

An approved spend can be claimed via the `payout` within the
`Config::SpendPeriod`. Clients provide an implementation of the `Pay`
trait which can pay an asset of the `AssetKind` to the `Beneficiary` in
`AssetBalance` units.

The implementation of the Pay trait might not have an immediate final
payment status, for example if implemented over `XCM` and the actual
transfer happens on a remote chain.

The `check_status` dispatchable can be executed to update the spend's
payment state and retry the `payout` if the payment has failed.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: command-bot <>

What does this PR do?
- Introduced the TotalValueLocked storage for nomination-pools. 
- introduced a slashing api in mock.rs 
- additional test for tracking a slashing event towards a pool without
sub-pools
- migration for the nomination-pools (V6 to V7) with
`VersionedMigration`

Why are these changes needed?
this is the continuation of the work by @Kianenigma

 in this
[PR](https://github.com/paritytech/substrate/pull/13319)

How were these changes implemented and what do they affect?
- It's an extra StorageValue that's modified whenever funds flow in or
out of staking for any of the `bonded_account` of `BondedPools`
- The `PoolSlashed`event is now emitted even when no `SubPools` are
found

Closes https://github.com/paritytech/polkadot-sdk/issues/155
KSM: HHEEgVzcqL3kCXgsxSfJMbsTy8dxoTctuXtpY94n4s8F4pS

---------

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Ankan <[email protected]>
Co-authored-by: Ankan <[email protected]>
Co-authored-by: command-bot <>

closes https://github.com/paritytech/polkadot-sdk/issues/158.
partially addresses
https://github.com/paritytech/polkadot-sdk/issues/226.

Instead of fragile calculation of current balance by looking at `free
balance - ED`, Nomination Pool now freezes ED in the pool reward account
to restrict an account from going below minimum balance. This also has a
nice side effect that if ED changes, we know how much is the imbalance
in ED frozen in the pool and the current required ED. A pool operator
can diligently top up the pool with the deficit in ED or vice versa,
withdraw the excess they transferred to the pool.

## Notable changes
- New call `adjust_pool_deposit`: Allows to top up the deficit or
withdraw the excess deposited funds to the pool.
- Uses Fungible trait (instead of Currency trait). Since NP was not
doing any locking/reserving previously, no migration is needed for this.
- One time migration of freezing ED from each of the existing pools (not
very PoV friendly but fine for relay chain).

This pull request is removing the Kusama and Polkadot runtime crates. As
still some crates dependent on the runtime crates, this pull request is
doing some more changes.

- It removes the `hostperfcheck` CLI command. This CLI command could
compare the current node against the standard hardware by doing some
checks. Later we added the hardware benchmark feature to Substrate. This
hardware benchmark is running on every node startup and prints a warning
if the current node is too slow. This makes this CLI command a duplicate
that was also depending on the kusama runtime.

- The pull request is removing the emulated integration tests that were
requiring the Kusama or Polkadot runtime crates.

Migrating [PR from the archived polkadot
repo](https://github.com/paritytech/polkadot/pull/7272)

As per
https://github.com/paritytech/polkadot/pull/7272#issuecomment-1559240466,
the changes in this MR include the following pallets into [x] Rococo and
[x] Westend runtimes:

    pallet_conviction_voting
    pallet_referenda
    pallet_ranked_collective
    pallet_custom_origins
    pallet_whitelist

And only for westend-runtime:

    pallet_treasury

Following [Kusama runtime
config](https://github.com/paritytech/polkadot/tree/dbae30efe080a1d41fe54ef4da8af47614c9ca93/runtime/kusama/src)
as a baseline.

Benchmarking of the following pallets done for both Rococo and Westend:

    pallet_conviction_voting
    pallet_referenda
    pallet_ranked_collective (only on Rococo)
    pallet_whitelist

And only for Westend:

    pallet_treasury

Removed Gov1 from Rococo as in
https://github.com/paritytech/polkadot/pull/6701

Rococo Gov1 storage will be cleaned in a different PR - [issue ](https://github.com/paritytech/polkadot-sdk/issues/1618)

---------

Co-authored-by: Giles Cope <[email protected]>

- Async-backing related primitives are stable `primitives::v6`
- Async-backing API is now part of `api_version(7)`
- It's enabled on Rococo and Westend runtimes

---------

Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>

This PR implements [`GenesisBuilder`
API](https://github.com/paritytech/polkadot-sdk/blob/a414ea75

/substrate/primitives/genesis-builder/src/lib.rs#L38)
for all the runtimes in polkadot repo.

Step towards: paritytech/polkadot-sdk#25

---------

Co-authored-by: ordian <[email protected]>

This PR filters calls from the Identity pallet from all Relay Chain
runtimes as preparation to move the identity state and logic to a system
parachain within each network.

After this change is deployed to a runtime, no more changes such as
adding new sub-identities will be possible. The frozen state will be
part of the genesis state of the system chain. After the system chain
launches, the pallet and all state will be removed from each Relay
Chain.

Applications and UIs that render display information from this pallet
will need to read from the system chain when it launches.

The goal is to allow Fellowship on Collective chain to have a sovereign
account on Polkadot so that we can add it as an identity registrar. This
will allow Fellows origin to be able to provide judgements for
Fellowship members.

This currently allow any body on any parachain including non system
parachains to have sovereign account. I cannot think of any reason why
that may be an issue but let me know if I should change it to filter
only system parachains.

[This](https://gist.github.com/xlc/ec61bfa4e9f6d62da27d30141ad2c72b) is
the testing script.

Original PR: https://github.com/paritytech/polkadot/pull/7518

Solution to establish HRMP channels between system parachains.

---------

Co-authored-by: Muharem Ismailov <[email protected]>

**Note**: This is a lift-and-shift PR from the old substrate and
polkadot repos, both PRs have been reviewed and audited
(https://github.com/paritytech/substrate/pull/13983,
https://github.com/paritytech/polkadot/pull/7140)

---

This PR implements a generic `BaseDeposit` calculation for signed
submissions, based on the size of the submission queue.

It adds a new associated type to EPM's config, `type SignedDepositBase`,
that implements `Convert<usize, BalanceOf<T>>`, which is used to
calculate the base deposit for signed submissions based on the size of
the signed submissions queue.

`struct GeometricDepositBase<Balance, Fixed, Inc>` implements the
convert trait so that the deposit value increases as a geometric
progression. The deposit base is calculated by `deposit_base =
fixed_deposit_base * (1 + increase_factor)^n`, where `n` is the term of
the progression (i.e. the number of signed submissions in the queue).
`Fixed` and `Inc` generic params are getters for `Balance` and
`IncreaseFactor` to compute the geometric progression. If
`IncreaseFactor = 0`, then the signed deposit is constant and equal to
`Fixed` regardless of the size of the queue.

### Runtime configs

In Kusama, the progression with 10% increase without changing the
current signed fixed deposit is: (term == size of the queue)

Term 1: `1,333,333,332,000`
Term 2: `1,333,333,332,000 * 1.10 = 1,466,666,665,200`
Term 3: `1,333,333,332,000 * 1.10^2 = 1,613,333,331,200`
Term 4: `1,333,333,332,000 * 1.10^3 = 1,774,666,664,320`
Term 5: `1,333,333,332,000 * 1.10^4 = 1,952,133,330,752`
Term 6: `1,333,333,332,000 * 1.10^5 = 2,147,346,663,827.20`
Term 7: `1,333,333,332,000 * 1.10^6 = 2,362,081,330,210.92`
Term 8: `1,333,333,332,000 * 1.10^7 = 2,598,289,463,231.01`
Term 9: `1,333,333,332,000 * 1.10^8 = 2,858,118,409,554.11`
Term 10: `1,333,333,332,000 * 1.10^9 = 3,143,930,250,509.52`

Westend:

Term 1: `2,000,000,000,000`
Term 2: `2,000,000,000,000 * 1.10 = 2,200,000,000,000`
Term 3: `2,000,000,000,000 * 1.10^2 = 2,420,000,000,000`
Term 4: `2,000,000,000,000 * 1.10^3 = 2,662,000,000,000`
Term 5: `2,000,000,000,000 * 1.10^4 = 2,928,200,000,000`
Term 6: `2,000,000,000,000 * 1.10^5 = 3,221,020,000,000`
Term 7: `2,000,000,000,000 * 1.10^6 = 3,543,122,000,000`
Term 8: `2,000,000,000,000 * 1.10^7 = 3,897,434,200,000`
Term 9: `2,000,000,000,000 * 1.10^8 = 4,287,177,620,000`
Term 10: `2,000,000,000,000 * 1.10^9 = 4,715,895,382,000`

and in Polkadot, the deposit increase is disabled in the current state
of the PR, as the increase factor is 0% -- so nothing changes from the
current behaviour.

Closes https://github.com/paritytech-secops/srlabs_findings/issues/189

## Summary 
The term "common good parachain" has been abandoned in favor of "system
parachain" - e.g. [Joe's speech at
Decoded2023](https://youtu.be/CSO-ERHK2gY?t=456). This pull request
tries to fix and align code with this vision.

## Impact

The important change is implementation of `trait IsSystem` for `Id`
[here](https://github.com/paritytech/polkadot-sdk/pull/1406/files#diff-0b7b4f5b962a18ce980354592b55ab2a27b5a2e9f6f8089ec803ca73853e8583R225-R229)
where we changed condition from `< 1000` to `<= 1999`, which means that
all parachain IDs bellow 1999 (included) are considered as "system
parachain" IDs. This change has a direct impact on the following
components:

####
[ChildSystemParachainAsSuperuser](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/xcm-builder/src/origin_conversion.rs#L72-L88)
This origin converter is used for allowing to process XCM `Transact`
from "system parachain" on the relay chain - e.g. see [configuration for
Kusama](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/runtime/kusama/src/xcm_config.rs#L92-L101).
Only configured for Kusama, Westend, Rococo runtimes.

**No need for this feature anymore.** See
[comment](https://github.com/paritytech/polkadot-sdk/pull/1406#issuecomment-1708218715).

####
[IsChildSystemParachain](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/xcm-builder/src/barriers.rs#L310-L317)
`IsChildSystemParachain` is used with `AllowExplicitUnpaidExecutionFrom`
barrier for checking XCM programs (they have to start with
`UnpaidExecution` instruction).
Only configured for Kusama, Westend, Rococo runtimes.

**Overall the impact is low or mostly ok because it only allows unpaid
execution for "system parachains" (e.g. AssetHub, BridgeHub...) on the
relay chain.**

####
[SiblingSystemParachainAsSuperuser](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/xcm-builder/src/origin_conversion.rs#L94-L114)

Not used anywhere in `polkadot-sdk` repo.


## Unresolved Questions
- [ ] constants `LOWEST_USER_ID` and `LOWEST_PUBLIC_ID` seem to express
the same thing now, do we want to keep them both or deprecated one of
them? If so, which one?
- [x] determine impact for `ChildSystemParachainAsSuperuser`

## TODO

- [ ] when merged here, open PR to the `polkadot-fellows`

## Related Material
https://youtu.be/CSO-ERHK2gY?t=456

https://forum.polkadot.network/t/polkadot-protocol-and-common-good-parachains/866
https://wiki.polkadot.network/docs/learn-system-chains

Make Preimage pallet use Consideration instead of handling deposits
directly.

Other half of paritytech/substrate#13666.
Depends/based on #1361.

Script for the lazy migration that should be run manually once:
[migrate-preimage-lazy.py](https://github.com/ggwpez/substrate-scripts/blob/master/migrate-preimage-lazy.py).

## TODO

- [x] Migration code.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

Bumps the known_good_semver group with 2 updates:
[serde_json](https://github.com/serde-rs/json) and
[syn](https://github.com/dtolnay/syn).

Updates `serde_json` from 1.0.106 to 1.0.107
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.107</h2>
<ul>
<li>impl IntoDeserializer for &amp;RawValue (<a
href="https://redirect.github.com/serde-rs/json/issues/1071">#1071</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/b6e113f2036c52e994ca805e530ee4ffae791f71"><code>b6e113f</code></a>
Release 1.0.107</li>
<li><a
href="https://github.com/serde-rs/json/commit/00626a0a95b3d4cee8d57709f0acc804c1296716"><code>00626a0</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1073">#1073</a>
from dtolnay/rawvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/b9d296f87d6081afdd590d5a6006737db961302b"><code>b9d296f</code></a>
IntoDeserializer for &amp;RawValue</li>
<li><a
href="https://github.com/serde-rs/json/commit/4ea34a2566ba82a2e602526d0919d23e88c9e5ef"><code>4ea34a2</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1072">#1072</a>
from dtolnay/rawvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/fe30766ae5c79bfb670b2de1c5596e6e11e22f8c"><code>fe30766</code></a>
Support deserializing from &amp;RawValue</li>
<li><a
href="https://github.com/serde-rs/json/commit/2c22077f0e2decfda5cdfd5821c5f9547d584b76"><code>2c22077</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1062">#1062</a>
from osiewicz/remove_build_rs</li>
<li><a
href="https://github.com/serde-rs/json/commit/04f7758b6eae935237574b25a1e63cf5e281e19e"><code>04f7758</code></a>
fixup! chore: Remove no_btreemap_get_key_value and
no_btreemap_remove_entry.</li>
<li><a
href="https://github.com/serde-rs/json/commit/83bdc5fd4213d94201a3d9ad0f2943da7eba1dd6"><code>83bdc5f</code></a>
Omit return keyword in <code>remove_entry</code></li>
<li><a
href="https://github.com/serde-rs/json/commit/89a274195680d3ea6a2b442ff633b81ccf60bbe4"><code>89a2741</code></a>
Revert &quot;Remove limb_width32 and limb_width64 features&quot;</li>
<li><a
href="https://github.com/serde-rs/json/commit/16e04ceeddfdfad18fb1ae8530695a318fa9bc02"><code>16e04ce</code></a>
fixup! Remove limb_width32 and limb_width64 features</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.106...v1.0.107">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.32 to 2.0.33
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.33</h2>
<ul>
<li>Special handling for the <code>(/*ERROR*/)</code> placeholder that
rustc uses for macros that fail to expand</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/5e3f55e684b7e33424b9f551105463418b196eb4"><code>5e3f55e</code></a>
Release 2.0.33</li>
<li><a
href="https://github.com/dtolnay/syn/commit/3e04809f5218c6d5fb2b09a6c55933e785825c75"><code>3e04809</code></a>
Pull in proc-macro2 error placeholder change</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2cd5608a4c37810bb0947b0c161a20695b3ce487"><code>2cd5608</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1508">#1508</a>
from dtolnay/error</li>
<li><a
href="https://github.com/dtolnay/syn/commit/84cfe09484f6468bc85fb01db11c6a10fcb2d988"><code>84cfe09</code></a>
Fall through to 'Unrecognized literal' error</li>
<li><a
href="https://github.com/dtolnay/syn/commit/a80570c81bf15c9afcf8e2470ab06f60f7a8183d"><code>a80570c</code></a>
Parse rustc's representation of macro expansion error</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.32...2.0.33">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

`VersionedMigration` has become somewhat widely used for handling
version bumps in migrations the last few months.

It is currently behind the `experimental` feature flag, requiring every
pallet that writes a new migration with version bumps to set up the
`experimental` flag in their own Cargo.tomls, and also for every runtime
using these pallets to explicitly enable the `experimental` flag for
each pallet.

This is becoming quite verbose, and I can only see the number of pallets
requiring the experimental flag increasing for no other reason than
using what has become a commonly used feature.

Additionally, I'm writing migration docs and would like to avoid
stepping through how to use the `experimental` feature to get
`VersionedMigration` working.

Since the feature has been used in production for some time now without
any reported issues, is becoming commonly used and ready to advertise in
docs, I feel this is a good time to make it non-experimental.

Bumps the known_good_semver group with 2 updates: [serde_json](https://github.com/serde-rs/json) and [syn](https://github.com/dtolnay/syn).


Updates `serde_json` from 1.0.105 to 1.0.106
- [Release notes](https://github.com/serde-rs/json/releases)
- [Commits](https://github.com/serde-rs/json/compare/v1.0.105...v1.0.106)

Updates `syn` from 2.0.31 to 2.0.32
- [Release notes](https://github.com/dtolnay/syn/releases)
- [Commits](https://github.com/dtolnay/syn/compare/2.0.31...2.0.32)

---
updated-dependencies:
- dependency-name: serde_json
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
- dependency-name: syn
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
...

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

* Remove SafeCallFilter from relay runtimes

The relays do not suffer from PoV bloat, so we dont need a
SafeCallFilter here.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Clippy

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>