- Jan 31, 2024
-
-
Branislav Kontur authored
The `parachains-common` contains a lots of constants and type definitions which are used for `polkadot-sdk`'s testnet runtimes and also for `polkadot-fellows`'s production [SP runtimes](https://github.com/polkadot-fellows/runtimes/tree/main/system-parachains/constants). This PR cleans `parachains-common` module to contain only common and generic functionality. Testnet-specific constants have been moved to the separate module dedicated just for testnets: `polkadot-sdk/cumulus/parachains/runtimes/constants/` Part of: https://github.com/paritytech/polkadot-sdk/issues/3054 --------- Co-authored-by: georgepisaltu <[email protected]>
-
- Jan 24, 2024
-
-
Just van Stam authored
Moved from: https://github.com/paritytech/polkadot/pull/6951 closes https://github.com/paritytech/polkadot-sdk/issues/490 - [x] update cumulus --- This PR introduces transactional processing of certain xcm instructions. For the list of instructions checkout https://github.com/paritytech/polkadot-sdk/issues/490. The transactional processing is implemented as an xcm-executor config item. The two implementations in this PR are `FrameTransactionalProcessor` and `()`. The `()` implementation does no transactional processing. Each implementation of the `ProcessTransaction` trait has an `IS_TRANSACTIONAL` const that tells the XCVM if transactional processing is actually implemented. If Transactional processing is implemented, changes to touched registers should also be rolled back to prevent inconsistencies. Note for reviewers: Check out the following safety assumption: https://github.com/paritytech/polkadot-sdk/pull/1222/files#diff-4effad7d8c1c9de19fd27e18661cbf2128c8718f3b2420a27d2f816e0749ea53R30 --------- Co-authored-by: Keith Yeung <[email protected]> Co-authored-by: Francisco Aguirre <[email protected]> Co-authored-by: command-bot <>
-
- Jan 16, 2024
-
-
Francisco Aguirre authored
# Note for reviewer Most changes are just syntax changes necessary for the new version. Most important files should be the ones under the `xcm` folder. # Description Added XCMv4. ## Removed `Multi` prefix The following types have been renamed: - MultiLocation -> Location - MultiAsset -> Asset - MultiAssets -> Assets - InteriorMultiLocation -> InteriorLocation - MultiAssetFilter -> AssetFilter - VersionedMultiAsset -> VersionedAsset - WildMultiAsset -> WildAsset - VersionedMultiLocation -> VersionedLocation In order to fix a name conflict, the `Assets` in `xcm-executor` were renamed to `HoldingAssets`, as they represent assets in holding. ## Removed `Abstract` asset id It was not being used anywhere and this simplifies the code. Now assets are just constructed as follows: ```rust let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into(); ``` No need for specifying `Concrete` anymore. ## Outcome is now a named fields struct Instead of ```rust pub enum Outcome { Complete(Weight), Incomplete(Weight, Error), Error(Error), } ``` we now have ```rust pub enum Outcome { Complete { used: Weight }, Incomplete { used: Weight, error: Error }, Error { error: Error }, } ``` ## Added Reanchorable trait Now both locations and assets implement this trait, making it easier to reanchor both. ## New syntax for building locations and junctions Now junctions are built using the following methods: ```rust let location = Location { parents: 1, interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into() }; ``` or ```rust let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]); ``` And they are matched like so: ```rust match location.unpack() { (1, [Parachain(id)]) => ... (0, Here) => ..., (1, [_]) => ..., } ``` This syntax is mandatory in v4, and has been also implemented for v2 and v3 for easier migration. This was needed to make all sizes smaller. # TODO - [x] Scaffold v4 - [x] Port github.com/paritytech/polkadot/pull/7236 - [x] Remove `Multi` prefix - [x] Remove `Abstract` asset id --------- Co-authored-by: command-bot <> Co-authored-by: Keith Yeung <[email protected]>
-
- Jan 10, 2024
-
-
Clara van Staden authored
- updates snowbridge crates to `0.9.0` - updates Cargo.toml files in preparation for publishing to crates.io - adds Kusama and Polkadot Snowbridge runtime config crates - moves runtime tests from the Snowbridge subtree into the bridge hub tests dir --------- Co-authored-by: claravanstaden <Cats 4 life!> Co-authored-by: Ron <[email protected]>
-
- Dec 21, 2023
-
-
Clara van Staden authored
# Description Adds Snowbridge to the Rococo bridge hub runtime. Includes config changes required in Rococo asset hub. --------- Co-authored-by: Alistair Singh <[email protected]> Co-authored-by: ron <[email protected]> Co-authored-by: Vincent Geddes <[email protected]> Co-authored-by: claravanstaden <Cats 4 life!>
-
- Dec 14, 2023
-
-
Francisco Aguirre authored
In the move from the old `Currency` traits to the new `fungible/s` family of traits, we already had the `FungiblesAdapter` and `NonFungiblesAdapter` for multiple fungible and non fungible assets respectively. However, for handling only one fungible asset, we were missing a `FungibleAdapter`, and so used the old `CurrencyAdapter` instead. This PR aims to fill in that gap, and provide the new adapter for more updated examples. I marked the old `CurrencyAdapter` as deprecated as part of this PR, and I'll change it to the new `FungibleAdapter` in a following PR. The two stages are separated so as to not bloat this PR with some name fixes in tests. --------- Co-authored-by: command-bot <>
-
- Dec 06, 2023
-
-
Adrian Catangiu authored
# Motivation (+testing) ### Enable easy `ForeignAssets` transfers using `pallet-xcm` We had just previously added capabilities to teleport fees during reserve-based transfers, but what about reserve-transferring fees when needing to teleport some non-fee asset? This PR aligns everything under either explicit reserve-transfer, explicit teleport, or this new flexible `transfer_assets()` which can mix and match as needed with fewer artificial constraints imposed to the user. This will enable, for example, a (non-system) parachain to teleport their `ForeignAssets` assets to AssetHub while using DOT to pay fees. (the assets are teleported - as foreign assets should from their owner chain - while DOT used for fees can only be reserve-based transferred between said parachain and AssetHub). Added `xcm-emulator` tests for this scenario ^. # Description Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based transfers for all `assets` including fees. Similarly `(limited_)teleport_assets` only allows teleports for all `assets` including fees. For complex combinations of asset transfers where assets and fees may have different reserves or different reserve/teleport trust configurations, users can use the newly added `transfer_assets()` extrinsic which is more flexible in allowing more complex scenarios. `assets` (excluding `fees`) must have same reserve location or otherwise be teleportable to `dest`. No limitations imposed on `fees`. - for local reserve: transfer assets to sovereign account of destination chain and forward a notification XCM to `dest` to mint and deposit reserve-based assets to `beneficiary`. - for destination reserve: burn local assets and forward a notification to `dest` chain to withdraw the reserve assets from this chain's sovereign account and deposit them to `beneficiary`. - for remote reserve: burn local assets, forward XCM to reserve chain to move reserves from this chain's SA to `dest` chain's SA, and forward another XCM to `dest` to mint and deposit reserve-based assets to `beneficiary`. - for teleports: burn local assets and forward XCM to `dest` chain to mint/teleport assets and deposit them to `beneficiary`. ## Review notes Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the rest of the PR is new tests and improving existing tests. --------- Co-authored-by: command-bot <>
-
- Nov 13, 2023
-
-
Adrian Catangiu authored
## Motivation `pallet-xcm` is the main user-facing interface for XCM functionality, including assets manipulation functions like `teleportAssets()` and `reserve_transfer_assets()` calls. While `teleportAsset()` works both ways, `reserve_transfer_assets()` works only for sending reserve-based assets to a remote destination and beneficiary when the reserve is the _local chain_. ## Solution This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to support transfers when reserves are other chains. This will allow complete, **bi-directional** reserve-based asset transfers user stories using `pallet-xcm`. Enables following scenarios: - transferring assets with local reserve (was previously supported iff asset used as fee also had local reserve - now it works in all cases), - transferring assets with reserve on destination, - transferring assets with reserve on remote/third-party chain (iff assets and fees have same remote reserve), - transferring assets with reserve different than the reserve of the asset to be used as fees - meaning can be used to transfer random asset with local/dest reserve while using DOT for fees on all involved chains, even if DOT local/dest reserve doesn't match asset reserve, - transferring assets with any type of local/dest reserve while using fees which can be teleported between involved chains. All of the above is done by pallet inner logic without the user having to specify which scenario/reserves/teleports/etc. The correct scenario and corresponding XCM programs are identified, and respectively, built automatically based on runtime configuration of trusted teleporters and trusted reserves. #### Current limitations: - while `fees` and "non-fee" `assets` CAN have different reserves (or fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among themselves, have different reserve locations (this is also implicitly enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely increased in the future). - `fees` and "non-fee" `assets` CANNOT have **different remote** reserves (this could also be supported in the future, but adds even more complexity while possibly not being worth it - we'll see what the future holds). Fixes https://github.com/paritytech/polkadot-sdk/issues/1584 Fixes https://github.com/paritytech/polkadot-sdk/issues/2055 --------- Co-authored-by: Francisco Aguirre <[email protected]> Co-authored-by: Branislav Kontur <[email protected]>
-
- Oct 18, 2023
-
-
Adrian Catangiu authored
cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add asset-bridging support to it (#1215) This commit adds Rococo Asset Hub dedicated runtime so we can test new features here, before merging them in Kusama Asset Hub. Also adds one such feature: asset transfer over bridge (Rococo AssetHub <> Wococo AssetHub) - clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime` - make it use Rococo primitives, names, assets, constants, etc - add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo AssetHub Fixes #1128 --------- Co-authored-by: Branislav Kontur <[email protected]> Co-authored-by: joe petrowski <[email protected]> Co-authored-by: Francisco Aguirre <[email protected]>
-
- Sep 18, 2023
-
-
Branislav Kontur authored
## Summary The term "common good parachain" has been abandoned in favor of "system parachain" - e.g. [Joe's speech at Decoded2023](https://youtu.be/CSO-ERHK2gY?t=456). This pull request tries to fix and align code with this vision. ## Impact The important change is implementation of `trait IsSystem` for `Id` [here](https://github.com/paritytech/polkadot-sdk/pull/1406/files#diff-0b7b4f5b962a18ce980354592b55ab2a27b5a2e9f6f8089ec803ca73853e8583R225-R229) where we changed condition from `< 1000` to `<= 1999`, which means that all parachain IDs bellow 1999 (included) are considered as "system parachain" IDs. This change has a direct impact on the following components: #### [ChildSystemParachainAsSuperuser](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/xcm-builder/src/origin_conversion.rs#L72-L88) This origin converter is used for allowing to process XCM `Transact` from "system parachain" on the relay chain - e.g. see [configuration for Kusama](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/runtime/kusama/src/xcm_config.rs#L92-L101). Only configured for Kusama, Westend, Rococo runtimes. **No need for this feature anymore.** See [comment](https://github.com/paritytech/polkadot-sdk/pull/1406#issuecomment-1708218715). #### [IsChildSystemParachain](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/xcm-builder/src/barriers.rs#L310-L317) `IsChildSystemParachain` is used with `AllowExplicitUnpaidExecutionFrom` barrier for checking XCM programs (they have to start with `UnpaidExecution` instruction). Only configured for Kusama, Westend, Rococo runtimes. **Overall the impact is low or mostly ok because it only allows unpaid execution for "system parachains" (e.g. AssetHub, BridgeHub...) on the relay chain.** #### [SiblingSystemParachainAsSuperuser](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/xcm-builder/src/origin_conversion.rs#L94-L114) Not used anywhere in `polkadot-sdk` repo. ## Unresolved Questions - [ ] constants `LOWEST_USER_ID` and `LOWEST_PUBLIC_ID` seem to express the same thing now, do we want to keep them both or deprecated one of them? If so, which one? - [x] determine impact for `ChildSystemParachainAsSuperuser` ## TODO - [ ] when merged here, open PR to the `polkadot-fellows` ## Related Material https://youtu.be/CSO-ERHK2gY?t=456 https://forum.polkadot.network/t/polkadot-protocol-and-common-good-parachains/866 https://wiki.polkadot.network/docs/learn-system-chains
-
- Aug 31, 2023
-
-
Bastian Köcher authored
* Rename `polkadot-parachain` to `polkadot-parachain-primitives` While doing this it also fixes some last `rustdoc` issues and fixes another Cargo warning related to `pallet-paged-list`. * Fix compilation * ".git/.scripts/commands/fmt/fmt.sh" * Fix XCM docs --------- Co-authored-by: command-bot <>
-
- Aug 30, 2023
-
-
Przemek Rzad authored
* Add missing Cumulus licenses * Typo * Add missing Substrate licenses * Single job checking the sub-repos in steps * Remove dates * Remove dates * Add missing (C) * Update FRAME UI tests Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Update more UI tests Signed-off-by: Oliver Tale-Yazdi <[email protected]> --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: Oliver Tale-Yazdi <[email protected]>
-
- Aug 14, 2023
-
-
Oliver Tale-Yazdi authored
* Copy rustfmt.toml from Polkadot master Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Format with new config Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Add Polkadot clippy config Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Update Cargo.lock Looks like https://github.com/paritytech/polkadot/pull/7611 did not correctly update the lockfile. Maybe a different Rust Version?! Signed-off-by: Oliver Tale-Yazdi <[email protected]> --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]>
-
- Jun 05, 2023
-
-
Just van Stam authored
* companion for xcm alias origin * update lockfile for {"polkadot", "substrate"} * add benchmark function for runtimes --------- Co-authored-by: parity-processbot <>
-
- Jun 02, 2023
-
-
joe petrowski authored
* change dir names * cargo toml updates * fix crate imports for build * change chain spec names and PR review rule * update cli to accept asset-hub * find/replace benchmark commands * integration tests * bridges docs * more integration tests * AuraId * other statemint tidying * rename statemint mod * chain spec mod * rename e2e test dirs * one more Runtime::Statemine * benchmark westmint * rename chain spec name and id * rename chain spec files * more tidying in scripts/docs/tests * rename old dir if exists * Force people to manually do the move. (Safer as there could be additional considerations with their setup) * review touchups * more renaming * Update polkadot-parachain/src/command.rs Co-authored-by: Bastian Köcher <[email protected]> * better error message * do not break on-chain spec_name * log info message that path has been renamed * better penpal docs --------- Co-authored-by: gilescope <[email protected]> Co-authored-by: Bastian Köcher <[email protected]> Co-authored-by: parity-processbot <>
-
- May 25, 2023
-
-
Gavin Wood authored
* Fixes for new API * Formatting * Fixes * Fixes * Further fixes * XCMP dispatch events mention message ID * XCMP event includes ID * Add DMP message ID functionality * Integrate into test parachains * Remove WithUniqueTopic usage * Use new primitive * Formatting * undiener * Revert lock * Fixes * Fixes * Fixes * Fixes * Formatting * message_hash becomes message_id * Rename * Another Rename * Fixes * Fix * Bump * Fixes * Grumble.
-
- May 23, 2023
-
-
Koute authored
* Do not assume `AssetId`s are `Copy` * update lockfile for {"substrate", "polkadot"} --------- Co-authored-by: parity-processbot <>
-
- May 16, 2023
-
-
Branislav Kontur authored
* Nits (merge before separatelly) * Small cosmetics for Rococo/Wococo bridge local run * Squashed 'bridges/' changes from 04b3dda6aa..5fc377ab34 5fc377ab34 Support for kusama-polkadot relaying (#2128) 01f4b7f1ba Fix clippy warnings (#2127) 696ff1c368 BHK/P alignments (#2115) 2a66aa3248 Small fixes (#2126) 7810f1a988 Cosmetics (#2124) daf250f69c Remove some `expect()` statements (#2123) 1c5fba8274 temporarily remove balance guard (#2121) 3d0e547361 Propagate message receival confirmation errors (#2116) 1c33143f07 Propagate message verification errors (#2114) b075b00910 Bump time from 0.3.20 to 0.3.21 51a3a51618 Bump serde from 1.0.160 to 1.0.162 da88d044a6 Bump clap from 4.2.5 to 4.2.7 cdca322cd6 Bump sysinfo from 0.28.4 to 0.29.0 git-subtree-dir: bridges git-subtree-split: 5fc377ab34f7dfd3293099c5feec49255e827812 * Fix * Allow to change storage constants (DeliveryReward, RequiredStakeForStakeAndSlash) + tests * Clippy * New SA for RO/WO * Squashed 'bridges/' changes from 5fc377ab34..0f6091d481 0f6091d481 Bump polkadot/substrate (#2134) 9233f0a337 Bump tokio from 1.28.0 to 1.28.1 a29c1caa93 Bump serde from 1.0.162 to 1.0.163 git-subtree-dir: bridges git-subtree-split: 0f6091d48184ebb4f75cb3089befa6b92cf37335
-
- May 06, 2023
-
-
Oliver Tale-Yazdi authored
* Import Clippy config from Polkadot Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Auto clippy fix Signed-off-by: Oliver Tale-Yazdi <[email protected]> * No tabs in comments Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Prefer matches Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Dont drop references Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Trivial Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Refactor Signed-off-by: Oliver Tale-Yazdi <[email protected]> * fmt Signed-off-by: Oliver Tale-Yazdi <[email protected]> * add clippy to ci * Clippy reborrow Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Update client/pov-recovery/src/lib.rs Co-authored-by: Bastian Köcher <[email protected]> * Update client/pov-recovery/src/lib.rs Co-authored-by: Bastian Köcher <[email protected]> * Partially revert 'Prefer matches' Using matches! instead of match does give less compiler checks as per review from @chevdor . Partially reverts 8c0609677f3ea040f77fffd5be6facf7c3fec95c Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Update .cargo/config.toml Co-authored-by: Chevdor <[email protected]> * Revert revert
💩 Should be fine to use matches! macro since it is an explicit whitelist, not wildcard matching. --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: alvicsam <[email protected]> Co-authored-by: Bastian Köcher <[email protected]> Co-authored-by: Chevdor <[email protected]> Co-authored-by: parity-processbot <>
-
- May 05, 2023
-
-
Muharem Ismailov authored
* xcm remote lock config * rename * update lockfile for {"polkadot", "substrate"} --------- Co-authored-by: parity-processbot <>
-
- Mar 23, 2023
-
-
Just van Stam authored
* add AdminOrigin to all xcm-configs in cumulus * cargo fmt * Update Substrate & Polkadot --------- Co-authored-by: parity-processbot <> Co-authored-by: Bastian Köcher <[email protected]>
-
- Mar 20, 2023
-
-
Gavin Wood authored
* Fix APIs * Reflect API changes * Everything builds * Fixes * Fixes * Update Cargo.toml * Fixes * Fixes * No networks use freezes/holds * update lockfile for {"polkadot", "substrate"} * Fix test ED cannot be zero anymore. Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Fix test --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: parity-processbot <> Co-authored-by: Oliver Tale-Yazdi <[email protected]>
-
- Jan 17, 2023
-
-
Gavin Wood authored
* Fixes * Undiener * Undiener * Undiener * Lockfile * Changes for send returning hash * Include message ID as params to execute_xcm * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Companion fixes * Formatting * Fixes * Formatting * Bump * Bump * Fixes * Formatting * Make the price of UMP/XCMP message sending configurable * cargo fmt * Remove InvertLocation * Formatting * Use ConstantPrice from polkadot-runtime-common * Fix naming * cargo fmt * Fixes * Fixes * Fixes * Add CallDispatcher * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Fixes * Remove unused import * Remove unused import * XCMv3 fixes (#1710) * Fixes XCMv3 related Fixes XCMv3 (removed query_holding) Fixes XCMv3 - should use _depositable_count? Fixes XCMv3 - removed TrustedReserve Fixes - missing weights for statemine/statemint/westmint [DO-NOT-CHERRY-PICK] tmp return query_holding to aviod conficts to master Fixes - missing functions for pallet_xcm_benchmarks::generic::Config Fixes for XCMv3 benchmarking Fix xcm - removed query_holding * ".git/.scripts/bench-bot.sh" xcm statemine assets pallet_xcm_benchmarks::generic * ".git/.scripts/bench-bot.sh" xcm statemint assets pallet_xcm_benchmarks::generic * ".git/.scripts/bench-bot.sh" xcm westmint assets pallet_xcm_benchmarks::generic * Fix imports * Avoid consuming XCM message for NotApplicable scenario (#1787) * Avoid consuming message for NotApplicable scenario * Avoid consuming message for NotApplicable scenario tests * Add 10 message processing limit to DMP queue * Add 10 message limit to XCMP queue * Always increment the message_processed count whenever a message is processed * Fix formatting * Set an upper limit to the overweight message DMP queue * Add upper limit to XCMP overweight message queue * Fix for missing weight for `fn unpaid_execution()` * Fix - usage of `messages_processed` * Fixes * Fixes * Fixes * cargo fmt * Fixes * Fixes * Fixes * Fixes * Remove unused import * Fixes for gav-xcm-v3 (#1835) * Fix for FungiblesAdapter - trait changes: Contains -> AssetChecking * Fix for missing weight for `fn unpaid_execution()` * Used NonLocalMint for all NonZeroIssuance * Fix * Fixes * Fixes * Fixes * Fixes * Fixes * Fix tests * Fixes * Add SafeCallFilter * Add missing config items * Add TODO * Use () as the PriceForParentDelivery * Fixes * Fixes * Fixes * Fixes * Update transact_origin to transact_origin_and_runtime_call * Add ReachableDest config item to XCM pallet * Update SafeCallFilter to allow remark_with_event in runtime benchmarks * cargo fmt * Update substrate * Fix worst_case_holding * Fix DMQ queue unit tests * Remove unused label * cargo fmt * Actually process incoming XCMs * Fixes * Fixes * Fixes * Fixes - return back Weightless * Added measured benchmarks for `pallet_xcm` (#1968) * Fix Fix Fix * Fix * Fixes for transact benchmark * Fixes add pallet_xcm to benchmarks * Revert remark_with_event * ".git/.scripts/bench-bot.sh" xcm statemine assets pallet_xcm_benchmarks::generic * Fixes * TMP * Fix for reserve_asset_deposited * ".git/.scripts/bench-bot.sh" pallet statemine assets pallet_xcm * Fix * ".git/.scripts/bench-bot.sh" pallet statemint assets pallet_xcm * Fix * ".git/.scripts/bench-bot.sh" pallet westmint assets pallet_xcm * Fix westmint * ".git/.scripts/bench-bot.sh" xcm statemine assets pallet_xcm_benchmarks::generic * Fix * ".git/.scripts/bench-bot.sh" xcm westmint assets pallet_xcm_benchmarks::generic * ".git/.scripts/bench-bot.sh" xcm statemint assets pallet_xcm_benchmarks::generic * ".git/.scripts/bench-bot.sh" pallet collectives-polkadot collectives pallet_xcm * Fix for collectives * ".git/.scripts/bench-bot.sh" pallet bridge-hub-kusama bridge-hubs pallet_xcm * ".git/.scripts/bench-bot.sh" pallet bridge-hub-rococo bridge-hubs pallet_xcm * Fixes for bridge-hubs * Fixes - return back Weightless * Fix - removed MigrateToTrackInactive for contracts-rococo Co-authored-by: command-bot <> * cargo fmt * Fix benchmarks * Bko gav xcm v3 (#1993) * Fix * ".git/.scripts/bench-bot.sh" xcm statemint assets pallet_xcm_benchmarks::fungible * ".git/.scripts/bench-bot.sh" xcm statemine assets pallet_xcm_benchmarks::fungible * ".git/.scripts/bench-bot.sh" xcm westmint assets pallet_xcm_benchmarks::fungible * ".git/.scripts/bench-bot.sh" xcm statemine assets pallet_xcm_benchmarks::generic * ".git/.scripts/bench-bot.sh" xcm statemint assets pallet_xcm_benchmarks::generic * ".git/.scripts/bench-bot.sh" xcm westmint assets pallet_xcm_benchmarks::generic * ".git/.scripts/bench-bot.sh" pallet statemine assets pallet_xcm * ".git/.scripts/bench-bot.sh" pallet westmint assets pallet_xcm * ".git/.scripts/bench-bot.sh" pallet statemint assets pallet_xcm * ".git/.scripts/bench-bot.sh" pallet collectives-polkadot collectives pallet_xcm * ".git/.scripts/bench-bot.sh" pallet bridge-hub-kusama bridge-hubs pallet_xcm * ".git/.scripts/bench-bot.sh" pallet bridge-hub-rococo bridge-hubs pallet_xcm Co-authored-by: command-bot <> * Change AllowUnpaidExecutionFrom to be explicit * xcm-v3 benchmarks, weights, fixes for bridge-hubs (#2035) * Dumy weights to get compile * Change UniversalLocation according to https://github.com/paritytech/polkadot/pull/4097 (Location Inversion Removed) * Fix bridge-hubs weights * ".git/.scripts/bench-bot.sh" pallet statemine assets pallet_xcm * ".git/.scripts/bench-bot.sh" pallet statemint assets pallet_xcm * ".git/.scripts/bench-bot.sh" pallet collectives-polkadot collectives pallet_xcm * ".git/.scripts/bench-bot.sh" pallet westmint assets pallet_xcm * ".git/.scripts/bench-bot.sh" xcm bridge-hub-kusama bridge-hubs pallet_xcm_benchmarks::generic * ".git/.scripts/bench-bot.sh" xcm bridge-hub-kusama bridge-hubs pallet_xcm_benchmarks::fungible * ".git/.scripts/bench-bot.sh" pallet bridge-hub-kusama bridge-hubs pallet_xcm * ".git/.scripts/bench-bot.sh" pallet bridge-hub-rococo bridge-hubs pallet_xcm * ".git/.scripts/bench-bot.sh" xcm bridge-hub-rococo bridge-hubs pallet_xcm_benchmarks::fungible * ".git/.scripts/bench-bot.sh" xcm bridge-hub-rococo bridge-hubs pallet_xcm_benchmarks::generic * Change NetworkId to Option<NetworkId> Co-authored-by: command-bot <> Co-authored-by: Keith Yeung <[email protected]> * Add event for showing the hash of an UMP sent message (#1228) * Add UpwardMessageSent event in parachain-system * additional fixes * Message Id * Fix errors from merge * fmt * more fmt * Remove todo * more formatting * Fixes * Fixes * Fixes * Fixes * Allow explicit unpaid executions from the relay chains for system parachains (#2060) * Allow explicit unpaid executions from the relay chains for system parachains * Put origin-filtering barriers into WithComputedOrigin * Use ConstU32<8> * Small nits * formatting * cargo fmt * Allow receiving XCMs from any relay chain plurality * Fixes * update lockfile for {"polkadot", "substrate"} * Update polkadot * Add runtime-benchmarks feature Co-authored-by: Keith Yeung <[email protected]> Co-authored-by: Branislav Kontur <[email protected]> Co-authored-by: girazoki <[email protected]> Co-authored-by: parity-processbot <>
-
- Jan 11, 2023
-
-
s0me0ne-unkn0wn authored
* Use primitives reexported from `polkadot_primitives` crate root * restart CI * Fixes after merge * update lockfile for {"polkadot", "substrate"} Co-authored-by: parity-processbot <>
-
- Dec 02, 2022
-
-
Branislav Kontur authored
* [BridgeHub] Setup Rococo backbone parachain * [BridgeHub] Setup Wococo parachain backbone (reused from Rococo) [Bridge-Backport] Rebase-fix BridgeHub] Added zombienet startup tomls for Rococo/Wococo Fix typo * [BridgeHub] Added chain_spec for live Rococo/Wococo * [BridgeHub] Clean bridge-hub-rococo runtime * [BridgeHub] Add bridge-hub-rococo to CI pipelines * [BridgeHub] Added bridge-hub-kusama - empty runtime/chain_spec setup * Fixes * Fixes for BH * Fixes for other runtimes - align all * Fixes - const * Fixes const * Fixes * Fix kusama-local * Sample zombienet runs * Fixes * Fixes for benchmarking * Fixes CI * Fixes * ".git/.scripts/bench-bot.sh" pallet bridge-hub-kusama bridge-hubs frame_system * ".git/.scripts/bench-bot.sh" pallet bridge-hub-kusama bridge-hubs pallet_collator_selection * ".git/.scripts/bench-bot.sh" pallet bridge-hub-kusama bridge-hubs pallet_balances * ".git/.scripts/bench-bot.sh" pallet bridge-hub-kusama bridge-hubs pallet_session * Fixes name * Fixes readme * ".git/.scripts/bench-bot.sh" pallet bridge-hub-kusama bridge-hubs pallet_timestamp * ".git/.scripts/bench-bot.sh" pallet bridge-hub-kusama bridge-hubs cumulus_pallet_xcmp_queue * ".git/.scripts/bench-bot.sh" pallet bridge-hub-kusama bridge-hubs pallet_collator_selection * Fixes * Fixes * rustfmt * Fixes * Added pallet_utility/pallet_multisig * Blind try for regex pr-custom-review.yml (added bridge-hub-kusama + collectives-polkadot) * Fixes * Fixes * ".git/.scripts/bench-bot.sh" pallet bridge-hub-kusama bridge-hubs pallet_utility * ".git/.scripts/bench-bot.sh" pallet bridge-hub-kusama bridge-hubs pallet_multisig * Trying to fix sed expression? * Added license headers + correct "DAG:" desc Co-authored-by: command-bot <>
-
- Nov 24, 2022
-
-
Xavier Lau authored
-
- Sep 20, 2022
-
-
Sergej Sakac authored
* Rename Origin * more renaming * fixes * fix errors * last fix? * rename * Update mock.rs * update lockfile for {"polkadot", "substrate"} Co-authored-by: Shawn Tabrizi <[email protected]> Co-authored-by: parity-processbot <>
-
- Sep 12, 2022
-
-
Sergej Sakac authored
* Companion for #11981 * rename * Event to RuntimeEvent in imports * missed rename * undo * revert * rename type Call & Event * commit * ... * fix * fix errors * fixes * fmt * fix imports * final fix? * fmt * fix? * fixes after merge * small fix * cargo update -p polkadot-runtime-common * cargo +nightly fmt * update lockfile for {"polkadot", "substrate"} * fix Co-authored-by: Shawn Tabrizi <[email protected]> Co-authored-by: parity-processbot <>
-
- Aug 31, 2022
-
-
Shawn Tabrizi authored
* cargo test -p cumulus-primitives-utility * cargo test -p cumulus-pallet-xcmp-queue * cargo test -p cumulus-pallet-xcm * cargo test -p cumulus-pallet-dmp-queue * cargo test -p pallet-template * cargo test -p cumulus-test-runtime * fix weights * fix more weights * cargo test -p parachains-common * cargo test -p parachain-template-runtime * fix weights import * cargo test -p collectives-polkadot-runtime * cargo test -p contracts-rococo-runtime * more * unused * fixes * Update benchmarking.rs * Update lib.rs * Update lib.rs * fix * fix bug in conversion * update lockfile for {"polkadot", "substrate"} Co-authored-by: parity-processbot <>
-
- Jul 12, 2022
-
-
Squirrel authored
* adapt to common good paras * fmt * Updated to leave parachain-template alone * use norm_id + cargo fmt * removed comment as we are not touching parachain template * is_penpal * updated code to new locations * changes required to get penpal running * cargo fmt * remove warning, rename chain * Update polkadot-parachain/src/command.rs * Update polkadot-parachain/src/command.rs Co-authored-by: Ignacio Palacios <[email protected]> * remove now moved functions * added runtime description * add missing copyright notices * more copyright notices. Co-authored-by: NachoPal <[email protected]>
-
- Jun 01, 2022
-
-
joe petrowski authored
* recognise no reserves * adjust should_execute * docs and pass should_execute * typo
-
- Apr 20, 2022
-
-
Squirrel authored
* Deny using relay chain for reserve transfers * match on junction as well. * Update polkadot-parachains/parachains-common/src/xcm_config.rs * Use Err to signal deny * Deny depisiting reserved assets + fmt * Allow DepositReserveAssets from relay chain Deny InitiateReserveWithdrawal * Rather than allow DepositReserveAsset, it was ReservAssetDeposited that should be allowed but logged. * don't reference common parachains. * Update parachain-template/runtime/src/xcm_config.rs * Warn if reserve asset deposited msg detected. Co-authored-by: Keith Yeung <[email protected]> Co-authored-by: joe petrowski <[email protected]>
-
- Mar 08, 2022
-
-
Keith Yeung authored
* Use WeightToFee when calculating cost of each weight unit in XCM trader * Set the OnUnbalanced type parameter for XCM Traders
-
- Mar 07, 2022
-
-
Gavin Wood authored
* Formatting * Add set_accept_ownership weight * Revert lock file * Fixes * Fixed * Revert lock * Fixes * Bump Substrate
-
- Feb 11, 2022
-
-
Keith Yeung authored
* Move XCM configurations out into its own module * Revert removal of the AccountNonceApi
-