Missing descriptions (47):  

- [x] `cumulus/client/collator/Cargo.toml`
- [x] `cumulus/client/relay-chain-inprocess-interface/Cargo.toml`
- [x] `cumulus/client/cli/Cargo.toml`
- [x] `cumulus/client/service/Cargo.toml`
- [x] `cumulus/client/relay-chain-rpc-interface/Cargo.toml`
- [x] `cumulus/client/relay-chain-interface/Cargo.toml`
- [x] `cumulus/client/relay-chain-minimal-node/Cargo.toml`
- [x] `cumulus/parachains/pallets/parachain-info/Cargo.toml`
- [x] `cumulus/parachains/pallets/ping/Cargo.toml`
- [x] `cumulus/primitives/utility/Cargo.toml`
- [x] `cumulus/primitives/aura/Cargo.toml`
- [x] `cumulus/primitives/core/Cargo.toml`
- [x] `cumulus/primitives/parachain-inherent/Cargo.toml`
- [x] `cumulus/test/relay-sproof-builder/Cargo.toml`
- [x] `cumulus/pallets/xcmp-queue/Cargo.toml`
- [x] `cumulus/pallets/dmp-queue/Cargo.toml`
- [x] `cumulus/pallets/xcm/Cargo.toml`
- [x] `polkadot/erasure-coding/Cargo.toml`
- [x] `polkadot/statement-table/Cargo.toml`
- [x] `polkadot/primitives/Cargo.toml`
- [x] `polkadot/rpc/Cargo.toml`
- [x] `polkadot/node/service/Cargo.toml`
- [x] `polkadot/node/core/parachains-inherent/Cargo.toml`
- [x] `polkadot/node/core/approval-voting/Cargo.toml`
- [x] `polkadot/node/core/dispute-coordinator/Cargo.toml`
- [x] `polkadot/node/core/av-store/Cargo.toml`
- [x] `polkadot/node/core/chain-api/Cargo.toml`
- [x] `polkadot/node/core/prospective-parachains/Cargo.toml`
- [x] `polkadot/node/core/backing/Cargo.toml`
- [x] `polkadot/node/core/provisioner/Cargo.toml`
- [x] `polkadot/node/core/runtime-api/Cargo.toml`
- [x] `polkadot/node/core/bitfield-signing/Cargo.toml`
- [x] `polkadot/node/network/dispute-distribution/Cargo.toml`
- [x] `polkadot/node/network/bridge/Cargo.toml`
- [x] `polkadot/node/network/collator-protocol/Cargo.toml`
- [x] `polkadot/node/network/approval-distribution/Cargo.toml`
- [x] `polkadot/node/network/availability-distribution/Cargo.toml`
- [x] `polkadot/node/network/bitfield-distribution/Cargo.toml`
- [x] `polkadot/node/network/gossip-support/Cargo.toml`
- [x] `polkadot/node/network/availability-recovery/Cargo.toml`
- [x] `polkadot/node/collation-generation/Cargo.toml`
- [x] `polkadot/node/overseer/Cargo.toml`
- [x] `polkadot/runtime/parachains/Cargo.toml`
- [x] `polkadot/runtime/common/slot_range_helper/Cargo.toml`
- [x] `polkadot/runtime/metrics/Cargo.toml`
- [x] `polkadot/xcm/pallet-xcm-benchmarks/Cargo.toml`
- [x] `polkadot/utils/generate-bags/Cargo.toml`
- [x]  `substrate/bin/minimal/runtime/Cargo.toml`

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: alindima <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Marcin S <[email protected]>
Co-authored-by: alindima <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

One for local networks with `fast-runtime` feature activated (1 minute
sessions) and one without the feature activated that will be the default
that runs with 1 hour long sessions.

Changes:
- Adds a new call `remove_key` to the sudo pallet to permanently remove
the sudo key.
- Remove some clones and general maintenance

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>

Part of #2186

The only usage of pallet-asset-rate is guarded by `runtime-benchmarks`
feature. I don't want ORML to be forced to include this pallet in deps
for no good reason.

This PR exposes a `force_remove_vesting` through a ROOT call. 
See linked
[issue](https://github.com/paritytech/polkadot-sdk/issues/269)

---------

Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Dónal Murray <[email protected]>

This PR updates the version of `serde_json` to `1.0.108` throughout the
codebase.

This PR prepares chains specs for _native-runtime-free_  world.

This PR has following changes:
- `substrate`:
  - adds support for:
- JSON based `GenesisConfig` to `ChainSpec` allowing interaction with
runtime `GenesisBuilder` API.
- interacting with arbitrary runtime wasm blob to[
`chain-spec-builder`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/bin/utils/chain-spec-builder/src/lib.rs#L46)
command line util,
- removes
[`code`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/frame/system/src/lib.rs#L660)
from `system_pallet`
  - adds `code` to the `ChainSpec`
- deprecates
[`ChainSpec::from_genesis`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/client/chain-spec/src/chain_spec.rs#L263),
but also changes the signature of this method extending it with `code`
argument.
[`ChainSpec::builder()`](https://github.com/paritytech/substrate/blob/20bee680ed098be7239cf7a6b804cd4de267983e/client/chain-spec/src/chain_spec.rs#L507)
should be used instead.
- `polkadot`:
- all references to `RuntimeGenesisConfig` in `node/service` are
removed,
- all
`(kusama|polkadot|versi|rococo|wococo)_(staging|dev)_genesis_config`
functions now return the JSON patch for default runtime `GenesisConfig`,
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,

- `cumulus`:
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,
- _JSON_ patch configuration used instead of `RuntimeGenesisConfig
struct` in all chain specs.
  
---------

Co-authored-by: command-bot <>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Kevin Krone <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

This PR is a follow up to #1661 

- [x] rename the `simple` module to `legacy`
- [x] fix benchmarks to disregard the number of additional fields
- [x] change the storage deposits to charge per encoded byte of the
identity information instance, removing the need for `fn
additional(&self) -> usize` in `IdentityInformationProvider`
- [x] ~add an extrinsic to rejig deposits to account for the change
above~
- [ ] ~ensure through proper configuration that the new byte-based
deposit is always lower than whatever is reserved now~
- [x] remove `IdentityFields` from the `set_fields` extrinsic signature,
as per [this
discussion](https://github.com/paritytech/polkadot-sdk/pull/1661#discussion_r1371703403)

> ensure through proper configuration that the new byte-based deposit is
always lower than whatever is reserved now

Not sure this is needed anymore. If the new deposits are higher than
what is currently on chain and users don't have enough funds to reserve
what is needed, the extrinisc fails and they're basically grandfathered
and frozen until they add more funds and/or make a change to their
identity. This behavior seems fine to me. Original idea
[here](https://github.com/paritytech/polkadot-sdk/pull/1661#issuecomment-1779606319).

> add an extrinsic to rejig deposits to account for the change above

This was initially implemented but now removed from this PR in favor of
the implementation detailed
[here](https://github.com/paritytech/polkadot-sdk/pull/2088).

---------

Signed-off-by: georgepisaltu <[email protected]>
Co-authored-by: joepetrowski <[email protected]>

(imported from https://github.com/paritytech/cumulus/pull/2157)

## Changes

This MR refactores the XCMP, Parachains System and DMP pallets to use
the [MessageQueue](https://github.com/paritytech/substrate/pull/12485)
for delayed execution of incoming messages. The DMP pallet is entirely
replaced by the MQ and thereby removed. This allows for PoV-bounded
execution and resolves a number of issues that stem from the current
work-around.

All System Parachains adopt this change.  
The most important changes are in `primitives/core/src/lib.rs`,
`parachains/common/src/process_xcm_message.rs`,
`pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs`
and the runtime configs.

### DMP Queue Pallet

The pallet got removed and its logic refactored into parachain-system.
Overweight message management can be done directly through the MQ
pallet.

Final undeployment migrations are provided by
`cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that
can be configured with an aux config trait like:

```rust
parameter_types! {
	pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME;
	pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent;
}

impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime {
	type PalletName = DmpQueuePalletName;
	type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>;
	type DbWeight = <Runtime as frame_system::Config>::DbWeight;
}

// And adding them to your Migrations tuple:
pub type Migrations = (
	...
	cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>,
	cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>,
);
```

### XCMP Queue pallet

Removed all dispatch queue functionality. Incoming XCMP messages are now
either: Immediately handled if they are Signals, enqueued into the MQ
pallet otherwise.

New config items for the XCMP queue pallet:
```rust
/// The actual queue implementation that retains the messages for later processing.
type XcmpQueue: EnqueueMessage<ParaId>;

/// How a XCM over HRMP from a sibling parachain should be processed.
type XcmpProcessor: ProcessMessage<Origin = ParaId>;

/// The maximal number of suspended XCMP channels at the same time.
#[pallet::constant]
type MaxInboundSuspended: Get<u32>;
```

How to configure those:

```rust
// Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since
// the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s.
type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>;

// Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched
// with origin `Junction::Sibling(…)`.
type XcmpProcessor = ProcessFromSibling<
	ProcessXcmMessage<
		AggregateMessageOrigin,
		xcm_executor::XcmExecutor<xcm_config::XcmConfig>,
		RuntimeCall,
	>,
>;

// Not really important what to choose here. Just something larger than the maximal number of channels.
type MaxInboundSuspended = sp_core::ConstU32<1_000>;
```

The `InboundXcmpStatus` storage item was replaced by
`InboundXcmpSuspended` since it now only tracks inbound queue suspension
and no message indices anymore.

Now only sends the most recent channel `Signals`, as all prio ones are
out-dated anyway.

### Parachain System pallet

For `DMP` messages instead of forwarding them to the `DMP` pallet, it
now pushes them to the configured `DmpQueue`. The message processing
which was triggered in `set_validation_data` is now being done by the MQ
pallet `on_initialize`.

XCMP messages are still handed off to the `XcmpMessageHandler`
(XCMP-Queue pallet) - no change here.

New config items for the parachain system pallet:
```rust
/// Queues inbound downward messages for delayed processing. 
///
/// Analogous to the `XcmpQueue` of the XCMP queue pallet.
type DmpQueue: EnqueueMessage<AggregateMessageOrigin>;
``` 

How to configure:
```rust
/// Use the MQ pallet to store DMP messages for delayed processing.
type DmpQueue = MessageQueue;
``` 

## Message Flow

The flow of messages on the parachain side. Messages come in from the
left via the `Validation Data` and finally end up at the `Xcm Executor`
on the right.

![Untitled
(1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d)

## Further changes

- Bumped the default suspension, drop and resume thresholds in
`QueueConfigData::default()`.
- `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when
they would be a noop.
- Properly validate the `QueueConfigData` before setting it.
- Marked weight files as auto-generated so they wont auto-expand in the
MR files view.
- Move the `hypothetical` asserts to `frame_support` under the name
`experimental_hypothetically`

Questions:
- [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in
the runtimes? Not sure how to best fix. Just having them like this makes
tests fail that rely on the real message processor when the feature is
enabled.
- [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler
already takes 80% so I put it to 10% but that is quite low.

TODO:
- [x] Remove c&p code after
https://github.com/paritytech/polkadot/pull/6271
- [x] Use `HandleMessage` once it is public in Substrate
- [x] fix `runtime-benchmarks` feature
https://github.com/paritytech/polkadot/pull/6966
- [x] Benchmarks
- [x] Tests
- [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended`
- [x] Possibly cleanup Migrations (DMP+XCMP)
- [x] optional: create `TransformProcessMessageOrigin` in Substrate and
replace `ProcessFromSibling`
- [ ] Rerun weights on ref HW

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>

helps https://github.com/paritytech/polkadot-sdk/issues/439.
closes https://github.com/paritytech/polkadot-sdk/issues/473.

PR link in the older substrate repository:
https://github.com/paritytech/substrate/pull/13498.

# Context
Rewards payout is processed today in a single block and limited to
`MaxNominatorRewardedPerValidator`. This number is currently 512 on both
Kusama and Polkadot.

This PR tries to scale the nominators payout to an unlimited count in a
multi-block fashion. Exposures are stored in pages, with each page
capped to a certain number (`MaxExposurePageSize`). Starting out, this
number would be the same as `MaxNominatorRewardedPerValidator`, but
eventually, this number can be lowered through new runtime upgrades to
limit the rewardeable nominators per dispatched call instruction.

The changes in the PR are backward compatible.

## How payouts would work like after this change
Staking exposes two calls, 1) the existing `payout_stakers` and 2)
`payout_stakers_by_page`.

### payout_stakers
This remains backward compatible with no signature change. If for a
given era a validator has multiple pages, they can call `payout_stakers`
multiple times. The pages are executed in an ascending sequence and the
runtime takes care of preventing double claims.

### payout_stakers_by_page
Very similar to `payout_stakers` but also accepts an extra param
`page_index`. An account can choose to payout rewards only for an
explicitly passed `page_index`.

**Lets look at an example scenario**
Given an active validator on Kusama had 1100 nominators,
`MaxExposurePageSize` set to 512 for Era e. In order to pay out rewards
to all nominators, the caller would need to call `payout_stakers` 3
times.

- `payout_stakers(origin, stash, e)` => will pay the first 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the second set of 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the last set of 76
nominators.
...
- `payout_stakers(origin, stash, e)` => calling it the 4th time would
return an error `InvalidPage`.

The above calls can also be replaced by `payout_stakers_by_page` and
passing a `page_index` explicitly.

## Commission note
Validator commission is paid out in chunks across all the pages where
each commission chunk is proportional to the total stake of the current
page. This implies higher the total stake of a page, higher will be the
commission. If all the pages of a validator's single era are paid out,
the sum of commission paid to the validator across all pages should be
equal to what the commission would have been if we had a non-paged
exposure.

### Migration Note
Strictly speaking, we did not need to bump our storage version since
there is no migration of storage in this PR. But it is still useful to
mark a storage upgrade for the following reasons:

- New storage items are introduced in this PR while some older storage
items are deprecated.
- For the next `HistoryDepth` eras, the exposure would be incrementally
migrated to its corresponding paged storage item.
- Runtimes using staking pallet would strictly need to wait at least
`HistoryDepth` eras with current upgraded version (14) for the migration
to complete. At some era `E` such that `E >
era_at_which_V14_gets_into_effect + HistoryDepth`, we will upgrade to
version X which will remove the deprecated storage items.
In other words, it is a strict requirement that E<sub>x</sub> -
E<sub>14</sub> > `HistoryDepth`, where
E<sub>x</sub> = Era at which deprecated storages are removed from
runtime,
E<sub>14</sub> = Era at which runtime is upgraded to version 14.
- For Polkadot and Kusama, there is a [tracker
ticket](https://github.com/paritytech/polkadot-sdk/issues/433) to clean
up the deprecated storage items.

### Storage Changes

#### Added
- ErasStakersOverview
- ClaimedRewards
- ErasStakersPaged

#### Deprecated
The following can be cleaned up after 84 eras which is tracked
[here](https://github.com/paritytech/polkadot-sdk/issues/433).

- ErasStakers.
- ErasStakersClipped.
- StakingLedger.claimed_rewards, renamed to
StakingLedger.legacy_claimed_rewards.

### Config Changes
- Renamed MaxNominatorRewardedPerValidator to MaxExposurePageSize.

### TODO
- [x] Tracker ticket for cleaning up the old code after 84 eras.
- [x] Add companion.
- [x] Redo benchmarks before merge.
- [x] Add Changelog for pallet_staking.
- [x] Pallet should be configurable to enable/disable paged rewards.
- [x] Commission payouts are distributed across pages.
- [x] Review documentation thoroughly.
- [x] Rename `MaxNominatorRewardedPerValidator` ->
`MaxExposurePageSize`.
- [x] NMap for `ErasStakersPaged`.
- [x] Deprecate ErasStakers.
- [x] Integrity tests.

### Followup issues
[Runtime api for deprecated ErasStakers storage
item](https://github.com/paritytech/polkadot-sdk/issues/426)

---------

Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: command-bot <>

# Description

The `trigger_defensive` call has been added to the `root-testing`
pallet. The idea is to have this pallet running on `Rococo/Westend` and
use it to verify if the runtime monitoring works end-to-end.

To accomplish this, `trigger_defensive` dispatches an event when it is
called.

Closes #1953

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [ ] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)

You can remove the "Checklist" section once all have been checked. Thank
you for your contribution!

✄
-----------------------------------------------------------------------------

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

We shouldn't override with their default fields that have been added in
the previous version(v8), because we are going to lose whatever values have
been set.

Note, v8 & v9 seems to have landed at the same time on Rococo, probably
they will land at the same time on westend and other chains, so functionally
doesn't make much difference, but let's have this fixed for people that copy-paste
:D, like me.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

Closes https://github.com/paritytech/release-engineering/issues/6

Adds a new Github Workflow which on a new release being created, builds
and attaches all runtimes managed in this repository in two flavours:
- `dev-debug-build`: Built with the `try-runtime` feature and has
logging enabled
- `on-chain-release`: Built with the regular old `on-chain-release`
feature

The new Github Workflow could be extended in the future by the
@paritytech/release-engineering team to fully automate the release
process if they choose to, similar to how it is fully automated in the
Fellowship repo
(https://github.com/polkadot-fellows/runtimes/blob/main/.github/workflows/release.yml).

The `on-chain-release` did not exist for parachains, so I added it. 

---

Tested on my fork: 
- https://github.com/liamaharon/polkadot-sdk/actions/runs/6663773523
- https://github.com/liamaharon/polkadot-sdk/releases/tag/test-6

---------

Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

Adds a config file that allows to run `zepter` without any arguments in
the workspace to address all issues.
A secondary workflow for the CI is provided as `zepter run check`. Both
the formatting and linting are now in one check for efficiancy.

The latest version also detects some more things that `featalign` was
already showing.

Error message [in the
CI](https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/3916205)
now looks like this:
```pre
...
crate 'test-parachains' (/Users/vados/Documents/work/polkadot-sdk/polkadot/parachain/test-parachains/Cargo.toml)
  feature 'std'
    must propagate to:
      parity-scale-codec
Found 55 issues (run with --fix to fix).
Error: Command 'lint propagate-feature' failed with exit code 1

Polkadot-SDK uses the Zepter CLI to detect abnormalities in the feature configuration.
It looks like one more more checks failed; please check the console output. You can try to automatically address them by running `zepter`.
Otherwise please ask directly in the Merge Request, GitHub Discussions or on Matrix Chat, thank you.

For more information, see:
  - https://github.com/paritytech/polkadot-sdk/issues/1831
  - https://github.com/ggwpez/zepter
```

TODO:
- [x] Check that CI fails correctly

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

it is indeed correct.

Co-authored-by: eskimor <[email protected]>

Splits the test in multiple cases.

Fixes #179 

# Description

This PR makes the structure containing identity information used in
`pallet-identity` generic through the pallet `Config`. Additionally, the
old structure is now available in a separate module called `simple`
(pending rename) and is compatible with the new interface.

Another change in this PR is that while the `additional` field in
`IdentityInfo` stays for backwards compatibility reasons, the associated
costs are stil present in the pallet through the `additional` function
in the `IdentityInformationProvider` interface. This function is marked
as deprecated as it is only a temporary solution to the backwards
compatibility problem we had. In short, we could have removed the
additional fields in the struct and done a migration, but we chose to
wait and do it off-chain through the genesis of the system parachain.
After we move the identity pallet to the parachain, additional fields
will be migrated into the existing fields and the `additional` key-value
store will be removed. Until that happens, this interface will provide
the necessary information to properly account for the associated costs.

Additionally, this PR fixes an unrelated issue; the `IdentityField` enum
used to represent the fields as bitflags couldn't store more than 8
fields, even though it was marked as `#[repr(u64)]`. This was because of
the `derive` implementation of `TypeInfo`, which assumed `u8` semantics.
The custom implementation of this trait in
https://github.com/paritytech/polkadot-sdk/commit/0105cc03


fixes the issue.

---------

Signed-off-by: georgepisaltu <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: joe petrowski <[email protected]>

closes https://github.com/paritytech/polkadot-sdk/issues/1882

## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Even if the host configuration is returning `0` for the `lookahead`, we
should schedule at least one job on a core if the core exists.

Reverts https://github.com/paritytech/polkadot-sdk/pull/1476

The `lock_pallet` / `unlock_pallet` additions in
https://github.com/paritytech/polkadot-sdk/pull/1814 will result in less
downtime for users than using runtime upgrades.

## Problem

This PR addresses the issue with testnet AssetHub builds, which was
discovered during the execution of `bot bench`.

https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038738
```
     Compiling asset-hub-rococo-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-rococo-runtime)
  warning: Linking globals named 'Core_version': symbol multiply defined!
  error: failed to load bitcode of module "rococo_runtime-8799ee884447805a.rococo_runtime.0bc572b8-cgu.0.rcgu.o": 
  warning: `asset-hub-rococo-runtime-wasm` (lib) generated 1 warning
  error: could not compile `asset-hub-rococo-runtime-wasm` (lib) due to previous error; 1 warning emitted
```

https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038739
```
Compiling asset-hub-westend-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-westend-runtime)
  warning: Linking globals named 'Core_version': symbol multiply defined!
  error: failed to load bitcode of module "westend_runtime-86d7844430f97d5c.westend_runtime.b7678d03-cgu.0.rcgu.o": 
  warning: `asset-hub-westend-runtime-wasm` (lib) generated 1 warning
  error: could not compile `asset-hub-westend-runtime-wasm` (lib) due to previous error; 1 warning emitted
```

## Solution

- Removed dependencies on `rococo-runtime` and `westend-runtime`
introduced by [this
PR](https://github.com/paritytech/polkadot-sdk/pull/1234/files#diff-a86375df98e04ca3cce1ea35c40257a222e2d5087f5f528ff33307678b78dc2dR534-R550).
- Replaced `<rococo_runtime::Treasury as PalletInfoAccess>::index()`
with `rococo_runtime_constants::TREASURY_PALLET_ID`.
- Added `check_treasury_pallet_id` to the relay runtimes to ensure that
the constant is aligned with the pallet id.
- Added "Rococo Treasury" to the waived locations (that will not be
charged fees in the executor) for `BridgeHubRococo` (to be aligned with
AssetHubs).

## References

[Full element discussion
here](https://matrix.to/#/!JUeaZUiYbdrvzvtwSL:parity.io/$2PnjYMsWRjR7M3oOfGuRI0XkjdoqJLtRcAPVcDLuLVg?via=parity.io&via=web3.foundation).

---------

Co-authored-by: command-bot <>

The migration was missing to migrate `AvailabilityCores`. If this isn't
migrated, all parachains in the availability phase would stall until the
next session is started. This pull request fixes this by migrating this
data. Besides that it is doing some cosmetics.

The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.

This requires: https://github.com/paritytech/scale-info/pull/197

---------

Co-authored-by: Francisco Aguirre <[email protected]>

Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.

This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.

The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.

XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).

# Note for reviewers

Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration

# Important note

After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!

Wallet UIs that want to expose the new delivery fee can do so using the
formula:

```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```

where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Giles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

Adds descriptions needed for publishing to crates.io.

cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add asset-bridging support to it (#1215)

This commit adds Rococo Asset Hub dedicated runtime so we can test new
features here, before merging them in Kusama Asset Hub.
Also adds one such feature: asset transfer over bridge (Rococo AssetHub
<> Wococo AssetHub)

- clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime`
- make it use Rococo primitives, names, assets, constants, etc
- add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo
AssetHub

Fixes #1128

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

Closes https://github.com/paritytech/polkadot-sdk/issues/1916

Changes:
- Trivially wrap the migration into a version migration to enforce
idempotency.
- Opinionated logging nits

@liamaharon maybe we can add a check to the `try-runtime-cli` that
migrations are idempotent? It should be possible to check that the
storage root is identical after executing a second time (and that it
does not panic like it did here 😆

).

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

Following
[polkadot#7314](https://github.com/paritytech/polkadot/pull/7314) and
after merging https://github.com/paritytech/polkadot-sdk/pull/1177 this
PR solves https://github.com/paritytech/polkadot-sdk/issues/1618

The following is a summary of the outcome of the migration.

| Module | Total Accounts | Total stake to unlock | Total deposit to
unreserve |
| ------- | --------------- | --------------------- |
-------------------------- |
| Elections Phragmen | 27 | 1,132.821063320441 ROC | 1.465386531600 ROC
|
| Democracy | 69 | 2733.923509345613 ROC | 0.166666665000 ROC |
| Tips | 4 | N/A | 0.015099999849 ROC |

The migrations will also remove the following amount of keys

103 Democracy keys 🧹
5 Council keys 🧹
1 TechnicalCommittee keys 🧹
25 PhragmenElection keys 🧹
1 TechnicalMembership keys 🧹
9 Tips keys 🧹

The runtime code of a parachain can be replaced on the relay-chain via:

[cumulus]:
[enact_authorized_upgrade](https://github.com/paritytech/polkadot-sdk/blob/1a38d6d6/cumulus/pallets/parachain-system/src/lib.rs#L661);
this is used for a runtime upgrade when a parachain is not bricked.

[polkadot] (these are used when a parachain is bricked):
-
[force_set_current_code](https://github.com/paritytech/polkadot-sdk/blob/1a38d6d6/polkadot/runtime/parachains/src/paras/mod.rs#L823):
immediately changes the runtime code of a given para without a pvf check
(root).
-
[force_schedule_code_upgrade](https://github.com/paritytech/polkadot-sdk/blob/1a38d6d6/polkadot/runtime/parachains/src/paras/mod.rs#L864):
schedules a change to the runtime code of a given para including a pvf
check of the new code (root).
-
[schedule_code_upgrade](https://github.com/paritytech/polkadot-sdk/blob/1a38d6d6/polkadot/runtime/common/src/paras_registrar.rs#L395):
schedules a change to the runtime code of a given para including a pvf
check of the new code. Besides root, the parachain or parachain manager
can call this extrinsic given that the parachain is unlocked.

Polkadot signals a parachain to be ready for a runtime upgrade through
the
[GoAhead](https://github.com/paritytech/polkadot-sdk/blob/e4949344

/polkadot/primitives/src/v5/mod.rs#L1229)
signal.

When in cumulus `enact_authorized_upgrade` is executed, the same
underlying helper function of `force_schedule_code_upgrade` &
`schedule_code_upgrade`:
[schedule_code_upgrade](https://github.com/paritytech/polkadot/blob/09b61286da11921a3dda0a8e4015ceb9ef9cffca/runtime/parachains/src/paras/mod.rs#L1778),
is called on the relay-chain, which sets the `GoAhead` signal (if the
pvf is accepted).

If Cumulus receives the `GoAhead` signal from polkadot without having
the `PendingValidationCode` ready, it will panic
([ref](https://github.com/paritytech/polkadot/pull/7412)). For
`enact_authorized_upgrade` we know for sure the `PendingValidationCode`
is set. On the contrary, for `force_schedule_code_upgrade` &
`schedule_code_upgrade` this is not the case.

This PR includes a flag such that the `GoAhead` signal will only be set
when a runtime upgrade is enacted by the parachain
(`enact_authorized_upgrade`).

additional info: https://github.com/paritytech/polkadot/pull/7412

Closes #641

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

This PR refactors the staking ledger logic to encapsulate all reads and
mutations of `Ledger`, `Bonded`, `Payee` and stake locks within the
`StakingLedger` struct implementation.

With these changes, all the reads and mutations to the `Ledger`, `Payee`
and `Bonded` storage map should be done through the methods exposed by
StakingLedger to ensure the data and lock consistency of the operations.
The new introduced methods that mutate and read Ledger are:

- `ledger.update()`: inserts/updates a staking ledger in storage;
updates staking locks accordingly (and ledger.bond(), which is synthatic
sugar for ledger.update())
- `ledger.kill()`: removes all Bonded and StakingLedger related data for
a given ledger; updates staking locks accordingly;
`StakingLedger::get(account)`: queries both the `Bonded` and `Ledger`
storages and returns a `Option<StakingLedger>`. The pallet impl exposes
fn ledger(account) as synthatic sugar for `StakingLedger::get(account)`.

Retrieving a ledger with `StakingLedger::get()` can be done by providing
either a stash or controller account. The input must be wrapped in a
`StakingAccount` variant (Stash or Controller) which is treated
accordingly. This simplifies the caller API but will eventually be
deprecated once we completely get rid of the controller account in
staking. However, this refactor will help with the work necessary when
completely removing the controller.

Other goals:

- No logical changes have been introduced in this PR;
- No breaking changes or updates in wallets required;
- No new storage items or need to perform storage migrations;
- Centralise the changes to bonds and ledger updates to simplify the
OnStakingUpdate updates to the target list (related to
https://github.com/paritytech/polkadot-sdk/issues/443)

Note: it would be great to prevent or at least raise a warning if
`Ledger<T>`, `Payee<T>` and `Bonded<T>` storage types are accessed
outside the `StakingLedger` implementation. This PR should not get
blocked by that feature, but there's a tracking issue here
https://github.com/paritytech/polkadot-sdk/issues/149

Related and step towards
https://github.com/paritytech/polkadot-sdk/issues/443

Co-authored-by: Marcin S <[email protected]>

# Description

In a couple of cases, there were links pointing to the w3f github pages
domain. In other instances, there were links pointing to the old
polkadot repo's github pages. Both of these are now pointing to the
relevant links in
https://paritytech.github.io/polkadot-sdk/book/index.html.

These changes were made specifically because the w3f github pages
returns a 404, and while fixing the links, the old polkadot repo links
were touched up as well even if they do redirect properly.

This shouldn't affect anything as these are documentation link changes
only.

Exposes disabled validators list via a runtime API.

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: ordian <[email protected]>

Adds a warning to FRAME pallets when a function argument that starts
with `_` is used in the weight formula.
This is in most cases an error since the weight witness needs to be
checked.

Example:

```rust
#[pallet::call_index(0)]
#[pallet::weight(T::SystemWeightInfo::remark(_remark.len() as u32))]
pub fn remark(_origin: OriginFor<T>, _remark: Vec<u8>) -> DispatchResultWithPostInfo {
	Ok(().into())
}
```

Produces this warning:

```pre
warning: use of deprecated constant `pallet::warnings::UncheckedWeightWitness_0::_w`: 
                 It is deprecated to not check weight witness data.
                 Please instead ensure that all witness data for weight calculation is checked before usage.
         
                 For more info see:
                     <https://github.com/paritytech/polkadot-sdk/pull/1818>
   --> substrate/frame/system/src/lib.rs:424:40
    |
424 |         pub fn remark(_origin: OriginFor<T>, _remark: Vec<u8>) -> DispatchResultWithPostInfo {
    |                                              ^^^^^^^
    |
    = note: `#[warn(deprecated)]` on by default
```

Can be suppressed like this, since in this case it is legit:

```rust
#[pallet::call_index(0)]
#[pallet::weight(T::SystemWeightInfo::remark(remark.len() as u32))]
pub fn remark(_origin: OriginFor<T>, remark: Vec<u8>) -> DispatchResultWithPostInfo {
	let _ = remark; // We dont need to check the weight witness.
	Ok(().into())
}
```

Changes:
- Add warning on uncheded weight witness
- Respect `subkeys` limit in `System::kill_prefix`
- Fix HRMP pallet and other warnings
- Update`proc_macro_warning` dependency
- Delete random folder `substrate/src/src` 🙈

 
- Adding Prdoc

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: joe petrowski <[email protected]>

[xcm] Use `Weight::MAX` for `reserve_asset_deposited`, `receive_teleported_asset` benchmarks (#1726)

# Description

## Summary

Previously, the `pallet_xcm::do_reserve_transfer_assets` and
`pallet_xcm::do_teleport_assets` functions relied on weight estimation
for remote chain execution, which was based on guesswork derived from
the local chain. This approach led to complications for runtimes that
did not provide or support specific [XCM
configurations](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76/polkadot/xcm/xcm-executor/src/config.rs#L43-L47)
for `IsReserve` or `IsTeleporter`. Consequently, such runtimes had to
resort to implementing hard-coded weights for XCM instructions like
`reserve_asset_deposited` or `receive_teleported_asset` to support
extrinsics such as `pallet_xcm::reserve_transfer_assets` and
`pallet_xcm::teleport_assets`, which depended on remote weight
estimation.

The issue of remote weight estimation was addressed and resolved by
[Pull Request
#1645](https://github.com/paritytech/polkadot-sdk/pull/1645), which
removed the need for remote weight estimation.

## Solution

As a continuation of this improvement, the current PR proposes further
cleanup by removing unnecessary hard-coded values and rectifying
benchmark results with `Weight::MAX` that previously used
`T::BlockWeights::get().max_block` as an override for unsupported XCM
instructions like `ReserveAssetDeposited` and `ReceiveTeleportedAsset`.


## Questions

- [x] Can we remove now also `Hardcoded till the XCM pallet is fixed`
for `deposit_asset`? E.g. for AssetHubKusama
[here](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76/cumulus/parachains/runtimes/assets/asset-hub-kusama/src/weights/xcm/mod.rs#L129-L134)
- [x] Are comments like
[this](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76/polkadot/runtime/kusama/src/weights/xcm/mod.rs#L94)
`// Kusama doesn't support ReserveAssetDeposited, so this benchmark has
a default weight` still relevant? Shouldnt be removed/changed?


## TODO

- [x] `bench bot` regenerate xcm weights for all runtimes
- [x] remove hard-coded stuff from system parachain weight files
- [ ] when merged, open `polkadot-fellow/runtimes` PR

## References

Fixes #1132
Closes #1132
Old polkadot repo [PR](https://github.com/paritytech/polkadot/pull/7546)

---------

Co-authored-by: command-bot <>

### Summary 

This PR introduces new dispatchables to the treasury pallet, allowing
spends of various asset types. The enhanced features of the treasury
pallet, in conjunction with the asset-rate pallet, are set up and
enabled for Westend and Rococo.

### Westend and Rococo runtimes.

Polkadot/Kusams/Rococo Treasury can accept proposals for `spends` of
various asset kinds by specifying the asset's location and ID.

#### Treasury Instance New Dispatchables:
- `spend(AssetKind, AssetBalance, Beneficiary, Option<ValidFrom>)` -
propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

in this context, the `AssetKind` parameter contains the asset's location
and it's corresponding `asset_id`, for example:
`USDT` on `AssetHub`,
``` rust
location = MultiLocation(0, X1(Parachain(1000)))
asset_id = MultiLocation(0, X2(PalletInstance(50), GeneralIndex(1984)))
```

the `Beneficiary` parameter is a `MultiLocation` in the context of the
asset's location, for example
``` rust
// the Fellowship salary pallet's location / account
FellowshipSalaryPallet = MultiLocation(1, X2(Parachain(1001), PalletInstance(64)))
// or custom `AccountId`
Alice = MultiLocation(0, AccountId32(network: None, id: [1,...]))
```

the `AssetBalance` represents the amount of the `AssetKind` to be
transferred to the `Beneficiary`. For permission checks, the asset
amount is converted to the native amount and compared against the
maximum spendable amount determined by the commanding spend origin.

the `spend` dispatchable allows for batching spends with different
`ValidFrom` arguments, enabling milestone-based spending. If the
expectations tied to an approved spend are not met, it is possible to
void the spend later using the `void_spend` dispatchable.

Asset Rate Pallet provides the conversion rate from the `AssetKind` to
the native balance.

#### Asset Rate Instance Dispatchables:
- `create(AssetKind, Rate)` - initialize a conversion rate to the native
balance for the given asset
- `update(AssetKind, Rate)` - update the conversion rate to the native
balance for the given asset
- `remove(AssetKind)` - remove an existing conversion rate to the native
balance for the given asset

the pallet's dispatchables can be executed by the Root or Treasurer
origins.

### Treasury Pallet

Treasury Pallet can accept proposals for `spends` of various asset kinds
and pay them out through the implementation of the `Pay` trait.

New Dispatchables:
- `spend(Config::AssetKind, AssetBalance, Config::Beneficiary,
Option<ValidFrom>)` - propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout;
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

The parameters' types of the `spend` dispatchable exposed via the
pallet's `Config` and allows to propose and accept a spend of a certain
amount.

An approved spend can be claimed via the `payout` within the
`Config::SpendPeriod`. Clients provide an implementation of the `Pay`
trait which can pay an asset of the `AssetKind` to the `Beneficiary` in
`AssetBalance` units.

The implementation of the Pay trait might not have an immediate final
payment status, for example if implemented over `XCM` and the actual
transfer happens on a remote chain.

The `check_status` dispatchable can be executed to update the spend's
payment state and retry the `payout` if the payment has failed.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: command-bot <>

What does this PR do?
- Introduced the TotalValueLocked storage for nomination-pools. 
- introduced a slashing api in mock.rs 
- additional test for tracking a slashing event towards a pool without
sub-pools
- migration for the nomination-pools (V6 to V7) with
`VersionedMigration`

Why are these changes needed?
this is the continuation of the work by @Kianenigma

 in this
[PR](https://github.com/paritytech/substrate/pull/13319)

How were these changes implemented and what do they affect?
- It's an extra StorageValue that's modified whenever funds flow in or
out of staking for any of the `bonded_account` of `BondedPools`
- The `PoolSlashed`event is now emitted even when no `SubPools` are
found

Closes https://github.com/paritytech/polkadot-sdk/issues/155
KSM: HHEEgVzcqL3kCXgsxSfJMbsTy8dxoTctuXtpY94n4s8F4pS

---------

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Ankan <[email protected]>
Co-authored-by: Ankan <[email protected]>
Co-authored-by: command-bot <>

closes https://github.com/paritytech/polkadot-sdk/issues/158.
partially addresses
https://github.com/paritytech/polkadot-sdk/issues/226.

Instead of fragile calculation of current balance by looking at `free
balance - ED`, Nomination Pool now freezes ED in the pool reward account
to restrict an account from going below minimum balance. This also has a
nice side effect that if ED changes, we know how much is the imbalance
in ED frozen in the pool and the current required ED. A pool operator
can diligently top up the pool with the deficit in ED or vice versa,
withdraw the excess they transferred to the pool.

## Notable changes
- New call `adjust_pool_deposit`: Allows to top up the deficit or
withdraw the excess deposited funds to the pool.
- Uses Fungible trait (instead of Currency trait). Since NP was not
doing any locking/reserving previously, no migration is needed for this.
- One time migration of freezing ED from each of the existing pools (not
very PoV friendly but fine for relay chain).