Skip to content
  1. Feb 22, 2024
    • Adrian Catangiu's avatar
      sc-consensus-beefy: pump gossip engine while waiting for initialization conditions (#3435) · 31546c8d
      Adrian Catangiu authored
      
      
      As part of BEEFY worker/voter initialization the task waits for certain
      chain and backend conditions to be fulfilled:
      - BEEFY consensus enabled on-chain & GRANDPA best finalized higher than
      on-chain BEEFY genesis block,
      - backend has synced headers for BEEFY mandatory blocks between best
      BEEFY and best GRANDPA.
      
      During this waiting time, any messages gossiped on the BEEFY topic for
      current chain get enqueued in the gossip engine, leading to RAM bloating
      and output warning/error messages when the wait time is non-negligible
      (like during a clean sync).
      
      This PR adds logic to pump the gossip engine while waiting for other
      things to make sure gossiped messages get consumed (practically
      discarded until worker is fully initialized).
      
      Also raises the warning threshold for enqueued messages from 10k to
      100k. This is in line with the other gossip protocols on the node.
      
      Fixes https://github.com/paritytech/polkadot-sdk/issues/3390
      
      ---------
      
      Signed-off-by: default avatarAdrian Catangiu <[email protected]>
      31546c8d
    • Oliver Tale-Yazdi's avatar
      [FRAME] Test for sane genesis default (#3412) · e76b2448
      Oliver Tale-Yazdi authored
      
      
      Closes https://github.com/paritytech/polkadot-sdk/issues/2713
      
      ---------
      
      Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      Co-authored-by: default avatarAndré Silva <[email protected]>
      e76b2448
  2. Feb 20, 2024
    • Oliver Tale-Yazdi's avatar
      Lift dependencies to the workspace (Part 2/x) (#3366) · e89d0fca
      Oliver Tale-Yazdi authored
      
      
      Lifting some more dependencies to the workspace. Just using the
      most-often updated ones for now.
      It can be reproduced locally.
      
      ```sh
      # First you can check if there would be semver incompatible bumps (looks good in this case):
      $ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"
      
      # Then apply the changes:
      $ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix
      
      # And format the changes:
      $ taplo format --config .config/taplo.toml
      ```
      
      ---------
      
      Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      e89d0fca
  3. Feb 19, 2024
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 1 update (#3379) · 3168ed4d
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 1 update:
      [clap](https://github.com/clap-rs/clap).
      
      Updates `clap` from 4.5.0 to 4.5.1
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/releases">clap's
      releases</a>.</em></p>
      <blockquote>
      <h2>v4.5.1</h2>
      <h2>[4.5.1] - 2024-02-16</h2>
      <h3>Fixes</h3>
      <ul>
      <li><em>(error)</em> Include suggestion to add <code>--</code> even if
      there is a &quot;did you mean&quot; so long as <code>last</code> or
      <code>trailing_var_arg</code> is used</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.5.1] - 2024-02-16</h2>
      <h3>Fixes</h3>
      <ul>
      <li><em>(error)</em> Include suggestion to add <code>--</code> even if
      there is a &quot;did you mean&quot; so long as <code>last</code> or
      <code>trailing_var_arg</code> is used</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/0c01b5558de0a1a513a2af429981099e550d1a78"><code>0c01b55</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/08e0b5bde4b45567be98d12e7d394762fa8da6a4"><code>08e0b5b</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/f2c4e6ec740cce29cea3fd7232e4d2716f089fc2"><code>f2c4e6e</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5359">#5359</a>
      from poliorcetics/ab/push-szymvyzpmnqx</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/e782775229081697e47d340a155d6b087eeb46f8"><code>e782775</code></a>
      fix(complete): Handle newlines in command/arg descriptions</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/fba7c8597bf3028400d6f6a22d83cedb7a2bd5a5"><code>fba7c85</code></a>
      test(complete): Show newline issue</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/8a7a13a5618cfdc4ff328624a5266e7b4d88649a"><code>8a7a13a</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/7b3a3e1e5eee57fc37110343b980cbe8170d20ad"><code>7b3a3e1</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/7b624ca74336f6f14f01007b9039990d53acda0f"><code>7b624ca</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5356">#5356</a>
      from epage/escape</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/446328a8d3cdaac28884bf8fdfcc85f35c8b5134"><code>446328a</code></a>
      fix(error): Include -- in more cases</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/7de6df878238ca8e3d9723bb9650f7fe9470d8bd"><code>7de6df8</code></a>
      test(error): Show existing last behavior</li>
      <li>Additional commits viewable in <a
      href="https://github.com/clap-rs/clap/compare/clap_complete-v4.5.0...clap_complete-v4.5.1">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.5.0&new-version=4.5.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      3168ed4d
  4. Feb 18, 2024
  5. Feb 16, 2024
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 6 updates (#3347) · 4b484e6a
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 6 updates:
      
      | Package | From | To |
      | --- | --- | --- |
      | [serde](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` |
      | [serde_json](https://github.com/serde-rs/json) | `1.0.111` | `1.0.113`
      |
      | [clap](https://github.com/clap-rs/clap) | `4.4.18` | `4.5.0` |
      | [syn](https://github.com/dtolnay/syn) | `2.0.48` | `2.0.49` |
      | [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.30` |
      `0.9.31` |
      | [serde_derive](https://github.com/serde-rs/serde) | `1.0.195` |
      `1.0.196` |
      
      Updates `serde` from 1.0.195 to 1.0.196
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/serde/releases">serde's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.196</h2>
      <ul>
      <li>Improve formatting of &quot;invalid type&quot; error messages
      involving floats (<a
      href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
      Release 1.0.196</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
      from dtolnay/decimalpoint</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
      Format Unexpected::Float with decimal point</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
      from dtolnay/workspacedeps</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
      Fix workspace.dependencies default-features future compat warning</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
      Sort workspace dependencies</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
      from rodoufu/workspaceDependencies</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
      Adding workspace dependencies</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
      from Sky9x/msrv-badge</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
      Use shields.io's MSRV badges</li>
      <li>See full diff in <a
      href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `serde_json` from 1.0.111 to 1.0.113
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/json/releases">serde_json's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.113</h2>
      <ul>
      <li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
      on Map (<a
      href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>)</li>
      </ul>
      <h2>v1.0.112</h2>
      <ul>
      <li>Improve formatting of &quot;invalid type&quot; error messages
      involving floats (<a
      href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/json/commit/09d865b34b9701be52764dc9bf571b1a16e9d3dc"><code>09d865b</code></a>
      Release 1.0.113</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/5aeab4eaf69d7959f013f8081865c264d6c00551"><code>5aeab4e</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>
      from serde-rs/remove</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/ca3c2ca3696cab79b8b279be7569ee1647250f1e"><code>ca3c2ca</code></a>
      Add swap_remove and shift_remove methods on Map</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/7fece969e3b480ec620419d65c2aeb08776bebcb"><code>7fece96</code></a>
      Release 1.0.112</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/6a6d2bbd9e8b8bd72573b863f12a4ec991f33232"><code>6a6d2bb</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>
      from serde-rs/unexpectedfloat</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/83d7bad54ba5db3a44198d6df0ff2e81621683fa"><code>83d7bad</code></a>
      Format f64 in error messages using ryu</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/107c2d1c42817f0d71f07a4d5b0ea2f29dbce8b8"><code>107c2d1</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1106">#1106</a>
      from serde-rs/invalidvalue</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/62ca3e4c01c2e62cd5c2a32e9104f386e5ce7808"><code>62ca3e4</code></a>
      Handle Unexpected::Unit in Error::invalid_value</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/296fafb8f32e8442ef8e4d5725c15ffca726b288"><code>296fafb</code></a>
      Factor out JSON-specific Display impl for serde::de::Unexpected</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/e56cc696bd7c112e5dd4ccfa23d094c3a1c1c1ff"><code>e56cc69</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1105">#1105</a>
      from keienWang/master</li>
      <li>Additional commits viewable in <a
      href="https://github.com/serde-rs/json/compare/v1.0.111...v1.0.113">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `clap` from 4.4.18 to 4.5.0
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.5.0] - 2024-02-08</h2>
      <h3>Compatibility</h3>
      <ul>
      <li>Update MSRV to 1.74</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/a751c5fe65cd33cb09e85ff3039b4fd0182cdb6e"><code>a751c5f</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/9ec6c942b81c370a8c14652e42295933244555ac"><code>9ec6c94</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/0735119775c2d27fef6b3c232cb9ef2fcbbd963f"><code>0735119</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/c4d3959506f5068f86ffb7ab34b622bd2da40dd8"><code>c4d3959</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5344">#5344</a>
      from epage/encode</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/f750e577789e1dd34c6950d8c8fe16d1bfd1f49c"><code>f750e57</code></a>
      fix(lex): Use new-ish OsStr API</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/1d9a554cdfddffcb92d197706b9720e2760cb443"><code>1d9a554</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5343">#5343</a>
      from epage/msrv</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/4b45d361b1b96eb1f37b7d1db2684203ca828a94"><code>4b45d36</code></a>
      chore: Update MSRV to 1.74</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/55b1f945157d4d0e480dea6c492e04d0b541088a"><code>55b1f94</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5342">#5342</a>
      from epage/divan</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/ea77b98da3f321069ae136a241a2d266c2b28bd7"><code>ea77b98</code></a>
      test(complete): Make it order independent</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/b0fea2bac60819bdb042e10c032817fded67f815"><code>b0fea2b</code></a>
      test(bench): Switch to divan</li>
      <li>Additional commits viewable in <a
      href="https://github.com/clap-rs/clap/compare/v4.4.18...clap_complete-v4.5.0">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `syn` from 2.0.48 to 2.0.49
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/dtolnay/syn/releases">syn's
      releases</a>.</em></p>
      <blockquote>
      <h2>2.0.49</h2>
      <ul>
      <li>Improve error location when parsing from an empty string literal
      using <code>LitStr::parse</code> (<a
      href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/dtolnay/syn/commit/e64c0636042bcd8cf56f9e6c3e828a49cb434649"><code>e64c063</code></a>
      Release 2.0.49</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/981359c5f46f25f3db42d1b341cc607f634688e7"><code>981359c</code></a>
      Merge pull request <a
      href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>
      from dtolnay/streof</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/51298d40a447b9e5b3cd8c898c2ea9d24b31cd6d"><code>51298d4</code></a>
      Improve error location at eof in LitStr::parse</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/270c63384a9d891f65880a03a5a92f0bf4605bbf"><code>270c633</code></a>
      Update test suite to nightly-2024-02-13</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/dc9cf16b9b0601d2d393d059c46a8f8e0220cc21"><code>dc9cf16</code></a>
      Remove FilterAttrs trait when unused</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/7dcfac79eda716fa806d68cc0aa811f3be717dc0"><code>7dcfac7</code></a>
      Ignore dead_code warning in test</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/98318441089f9a9bb596fc010ed14c3b593d4bda"><code>9831844</code></a>
      Update signature of Emitter::emit_diagnostic in nightly-2024-02-07</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/9e8033f63da93dfb6a3e698449c6edff5e56727d"><code>9e8033f</code></a>
      Update test suite to nightly-2024-02-07</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/cb3348cd94be50995054796facdfa055b6e0e9e8"><code>cb3348c</code></a>
      Update test suite to nightly-2024-01-23</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/15b9dbcd67bc56f3da7d33bbede46f7380fc7164"><code>15b9dbc</code></a>
      Update test suite to nightly-2024-01-19</li>
      <li>Additional commits viewable in <a
      href="https://github.com/dtolnay/syn/compare/2.0.48...2.0.49">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `serde_yaml` from 0.9.30 to 0.9.31
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
      releases</a>.</em></p>
      <blockquote>
      <h2>0.9.31</h2>
      <ul>
      <li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
      on Mapping (<a
      href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/2a77483b23897115bdd69af32ae34d593268d555"><code>2a77483</code></a>
      Release 0.9.31</li>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/d8d1a839cf42ef4627c66bebd743f5fecd24e3ed"><code>d8d1a83</code></a>
      Merge pull request <a
      href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>
      from dtolnay/remove</li>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/f8a99a496836ccfa6c547af9136986d13011be98"><code>f8a99a4</code></a>
      Add swap_remove and shift_remove methods on Mapping</li>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/8b26413e3307e39329dc68a96b065058aec38f9a"><code>8b26413</code></a>
      Work around dead_code warning in tests</li>
      <li>See full diff in <a
      href="https://github.com/dtolnay/serde-yaml/compare/0.9.30...0.9.31">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `serde_derive` from 1.0.195 to 1.0.196
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/serde/releases">serde_derive's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.196</h2>
      <ul>
      <li>Improve formatting of &quot;invalid type&quot; error messages
      involving floats (<a
      href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
      Release 1.0.196</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
      from dtolnay/decimalpoint</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
      Format Unexpected::Float with decimal point</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
      from dtolnay/workspacedeps</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
      Fix workspace.dependencies default-features future compat warning</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
      Sort workspace dependencies</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
      from rodoufu/workspaceDependencies</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
      Adding workspace dependencies</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
      from Sky9x/msrv-badge</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
      Use shields.io's MSRV badges</li>
      <li>See full diff in <a
      href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      4b484e6a
  6. Feb 15, 2024
  7. Feb 14, 2024
  8. Feb 12, 2024
    • Oliver Tale-Yazdi's avatar
      Lift dependencies to the workspace (Part 1) (#2070) · e80c2473
      Oliver Tale-Yazdi authored
      Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
      - Set log to `0.4.20` everywhere
      - Lift `log` to the workspace
      
      Starting with a simpler one after seeing
      https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw
      
      .
      This sets the `default-features` to `false` in the root and then
      overwrites that in each create to its original value. This is necessary
      since otherwise the `default` features are additive and its impossible
      to disable them in the crate again once they are enabled in the
      workspace.
      
      I am using a tool to do this, so its mostly a test to see that it works
      as expected.
      
      ---------
      
      Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      e80c2473
  9. Feb 08, 2024
    • Gonçalo Pestana's avatar
      Fixes `TotalValueLocked` out of sync in nomination pools (#3052) · aac07af0
      Gonçalo Pestana authored
      The `TotalLockedValue` storage value in nomination pools pallet may get
      out of sync if the staking pallet does implicit withdrawal of unlocking
      chunks belonging to a bonded pool stash. This fix is based on a new
      method in the `OnStakingUpdate` traits, `on_withdraw`, which allows the
      nomination pools pallet to adjust the `TotalLockedValue` every time
      there is an implicit or explicit withdrawal from a bonded pool's stash.
      
      This PR also adds a migration that checks and updates the on-chain TVL
      if it got out of sync due to the bug this PR fixes.
      
      **Changes to `trait OnStakingUpdate`**
      
      In order for staking to notify the nomination pools pallet that chunks
      where withdrew, we add a new method, `on_withdraw` to the
      `OnStakingUpdate` trait. The nomination pools pallet filters the
      withdraws that are related to bonded pool accounts and updates the
      `TotalValueLocked` accordingly.
      
      **Others**
      - Adds try-state checks to the EPM/staking e2e tests
      - Adds tests for auto withdrawing in the context of nomination pools
      
      **To-do**
      - [x] check if we need a migration to fix the current `TotalValueLocked`
      (run try-runtime)
      - [x] migrations to fix the current on-chain TVL value 
      
        **Kusama**:
      ```
      TotalValueLocked: 99.4559 kKSM
      TotalValueLocked (calculated) 99.4559 kKSM
      ```
      
      
      ️ **Westend**:
      ```
      TotalValueLocked: 18.4060 kWND
      TotalValueLocked (calculated) 18.4050 kWND
      ```
      **Polkadot**: TVL not released yet.
      
      Closes https://github.com/paritytech/polkadot-sdk/issues/3055
      
      ---------
      
      Co-authored-by: command-bot <>
      Co-authored-by: default avatarRoss Bulat <[email protected]>
      Co-authored-by: default avatarDónal Murray <[email protected]>
      aac07af0
    • drskalman's avatar
      Make BEEFY client keystore generic over BEEFY `AuthorityId` type (#2258) · 0a94124d
      drskalman authored
      
      
      This is the significant step to make BEEFY client able to handle both
      ECDSA and (ECDSA, BLS) type signature. The idea is having BEEFY Client
      generic on crypto types makes migration to new types smoother.
      
      This makes the BEEFY Keystore generic over AuthorityId and extends its
      tests to cover the case when the AuthorityId is of type (ECDSA,
      BLS12-377)
      
      ---------
      
      Co-authored-by: default avatarDavide Galassi <[email protected]>
      Co-authored-by: default avatarRobert Hambrock <[email protected]>
      0a94124d
  10. Feb 06, 2024
    • Koute's avatar
      Build more runtimes targeting PolkaVM (#3209) · 402b64ca
      Koute authored
      This PR improves compatibility with RISC-V and PolkaVM, allowing more
      runtimes to successfully compile.
      
      In particular, it makes the following changes:
      
      - The `sp-mmr-primitives` and `sp-consensus-beefy` crates
      unconditionally required an `std`-only dependency; now they only require
      those dependencies when the `std` feature is actually enabled. (Our
      RISC-V target is, unlike WASM, a true `no_std` target where you can't
      accidentally use stuff from `std` anymore.)
      - One of our dependencies (the `bitvec` trace) uses a crate called
      `radium` which doesn't compile under RISC-V due to incomplete
      autodetection logic in their `build.rs` file. The good news is that this
      is already fixed in the newest upstream version of `radium`, and the
      newest version of `bitvec` uses it. The bad news is that the newest
      version of `bitvec` is not currently released on crates.io, so we can't
      use it. I've [created an
      issue](https://github.com/ferrilab/ferrilab/issues/5) asking for a new
      release, but in the meantime I forked the currently used `radium` 0.7,
      [fixed the faulty
      logic](https://github.com/paritytech/radium-0.7-fork/commit/ed66c8a294b138c67f93499644051d97d4c7fbda)
      and used cargo's patching capabilities to use it for the RISC-V runtime
      builds. This might be a little hacky, but it is the least intrusive way
      to fix the problem, doesn't affect WASM builds at all, and we can
      trivially remove it once a new `bitvec` is released.
      - The new runtimes are added to the CI to make sure their compilation
      doesn't break.
      402b64ca
    • Squirrel's avatar
      sp-std -> core (#3199) · bc2e5e1f
      Squirrel authored
      First in a series of PRs that reduces our use of sp-std with a view to
      deprecating it.
      
      This is just looking at /substrate and moving some of the references
      from `sp-std` to `core`.
      These particular changes should be uncontroversial.
      
      Where macros are used `::core` should be used to remove any ambiguity.
      
      part of https://github.com/paritytech/polkadot-sdk/issues/2101
      bc2e5e1f
    • Oliver Tale-Yazdi's avatar
      Ranked collective `Add`+`Remove` origins (#3212) · c552fb54
      Oliver Tale-Yazdi authored
      
      
      Superseeds https://github.com/paritytech/polkadot-sdk/pull/1245  
      
      This PR is a migration of the
      https://github.com/paritytech/substrate/pull/14577.
      
      The PR added associated types (`AddOrigin` & `RemoveOrigin`) to
      `Config`. It allows you to decouple types and areas of responsibility,
      since at the moment the same types are responsible for adding and
      promoting(removing and demoting). This will improve the flexibility of
      the pallet configuration.
      
      ```
      /// The origin required to add a member.
      type AddOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = ()>;
      
      /// The origin required to remove a member. The success value indicates the
      /// maximum rank *from which* the removal may be.
      type RemoveOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = Rank>;
      ```
      To achieve the backward compatibility, the users of the pallet can use
      the old type via the new morph:
      
      ```
      type AddOrigin = MapSuccess<Self::PromoteOrigin, Ignore>;
      type RemoveOrigin = Self::DemoteOrigin;
      ```
      
      ---------
      
      Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      Co-authored-by: default avatarPraetorP <[email protected]>
      Co-authored-by: default avatarPavel Orlov <[email protected]>
      c552fb54
  11. Feb 03, 2024
    • Koute's avatar
      Initial support for building RISC-V runtimes targeting PolkaVM (#3179) · e349fc9e
      Koute authored
      This PR adds initial support for building RISC-V runtimes targeting
      PolkaVM.
      
      - Setting the `SUBSTRATE_RUNTIME_TARGET=riscv` environment variable will
      now build a RISC-V runtime instead of a WASM runtime.
      - This only adds support for *building* runtimes; running them will need
      a PolkaVM-based executor, which I will add in a future PR.
      - Only building the minimal runtime is supported (building the Polkadot
      runtime doesn't work *yet* due to one of the dependencies).
      - The builder now sets a `substrate_runtime` cfg flag when building the
      runtimes, with the idea being that instead of doing `#[cfg(not(feature =
      "std"))]` or `#[cfg(target_arch = "wasm32")]` to detect that we're
      building a runtime you'll do `#[cfg(substrate_runtime)]`. (Switching the
      whole codebase to use this will be done in a future PR; I deliberately
      didn't do this here to keep this PR minimal and reviewable.)
      - Further renaming of things (e.g. types, environment variables and proc
      macro attributes having "wasm" in their name) to be target-agnostic will
      also be done in a future refactoring PR (while keeping backwards
      compatibility where it makes sense; I don't intend to break anyone's
      workflow or create unnecessary churn).
      - This PR also fixes two bugs in the `wasm-builder` crate:
      * The `RUSTC` environment variable is now removed when invoking the
      compiler. This prevents the toolchain version from being overridden when
      called from a `build.rs` script.
      * When parsing the `rustup toolchain list` output the `(default)` is now
      properly stripped and not treated as part of the version.
      - I've also added a minimal CI job that makes sure this doesn't break in
      the future. (cc @paritytech/ci)
      
      cc @athei
      
      
      
      ------
      
      Also, just a fun little tidbit: quickly comparing the size of the built
      runtimes it seems that the PolkaVM runtime is slightly smaller than the
      WASM one. (`production` build, with the `names` section substracted from
      the WASM's size to keep things fair, since for the PolkaVM runtime we're
      currently stripping out everything)
      
      - `.wasm`: 625505 bytes
      - `.wasm` (after wasm-opt -O3): 563205 bytes
      - `.wasm` (after wasm-opt -Os): 562987 bytes
      - `.wasm` (after wasm-opt -Oz): 536852 bytes
      - `.polkavm`: ~~580338 bytes~~ 550476 bytes (after enabling extra target
      features; I'll add those in another PR once we have an executor working)
      
      ---------
      
      Co-authored-by: default avatarBastian Köcher <[email protected]>
      e349fc9e
  12. Jan 31, 2024
    • dependabot[bot]'s avatar
      Bump bounded-collections from 0.1.9 to 0.2.0 (#3118) · 2adf499a
      dependabot[bot] authored
      
      
      Bumps [bounded-collections](https://github.com/paritytech/parity-common)
      from 0.1.9 to 0.2.0.
      <details>
      <summary>Commits</summary>
      <ul>
      <li>See full diff in <a
      href="https://github.com/paritytech/parity-common/commits/impl-rlp-v0.2.0">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=bounded-collections&package-manager=cargo&previous-version=0.1.9&new-version=0.2.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      Co-authored-by: default avatarLiam Aharon <[email protected]>
      2adf499a
  13. Jan 30, 2024
  14. Jan 29, 2024
    • Lulu's avatar
      Link mermaid docs to crate that uses them (#3087) · 6a168ad5
      Lulu authored
      While including files cross crate works locally. When pushed to
      crates.io each crate is seperate so the file path no longer exists.
      
      Instead change it to a symlink, which cargo will change to a read
      directory when published.
      6a168ad5
  15. Jan 26, 2024
  16. Jan 24, 2024
    • dependabot[bot]'s avatar
      Bump arbitrary from 1.3.0 to 1.3.2 (#3037) · b57e53dc
      dependabot[bot] authored
      
      
      Bumps [arbitrary](https://github.com/rust-fuzz/arbitrary) from 1.3.0 to
      1.3.2.
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/rust-fuzz/arbitrary/blob/main/CHANGELOG.md">arbitrary's
      changelog</a>.</em></p>
      <blockquote>
      <h2>1.3.2</h2>
      <p>Released 2023-10-30.</p>
      <h3>Added</h3>
      <ul>
      <li>Added <code>Arbitrary</code> implementations for
      <code>Arc&lt;[T]&gt;</code> and
      <code>Rc&lt;[T]&gt;</code>. <a
      href="https://redirect.github.com/rust-fuzz/arbitrary/pull/160">#160</a></li>
      </ul>
      <hr />
      <h2>1.3.1</h2>
      <p>Released 2023-10-11.</p>
      <h3>Fixed</h3>
      <ul>
      <li>Fixed an issue with generating collections of collections in
      <code>arbitrary_take_rest</code> where
      <code>&lt;Vec&lt;Vec&lt;u8&gt;&gt;&gt;::arbitrary_take_rest</code> would
      never
      generate <code>vec![vec![]]</code> for example. See
      <a
      href="https://redirect.github.com/rust-fuzz/arbitrary/pull/159">#159</a>
      for details.</li>
      </ul>
      <hr />
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/rust-fuzz/arbitrary/commit/66e75c5bf57275d400d3ebc746e0cee4f6ff9596"><code>66e75c5</code></a>
      Bump to version 1.3.1</li>
      <li><a
      href="https://github.com/rust-fuzz/arbitrary/commit/04054dfa1a0f07b233db0581c2d61615df737ade"><code>04054df</code></a>
      Merge pull request <a
      href="https://redirect.github.com/rust-fuzz/arbitrary/issues/160">#160</a>
      from kpreid/arcslice</li>
      <li><a
      href="https://github.com/rust-fuzz/arbitrary/commit/ef5dff63e4f3079acc6455445f0a8080d4857813"><code>ef5dff6</code></a>
      Implement <code>Arbitrary</code> for <code>Arc\&lt;[A]&gt;</code> and
      <code>Rc\&lt;[A]&gt;</code>.</li>
      <li><a
      href="https://github.com/rust-fuzz/arbitrary/commit/b3e8342ea8dc8437aff3d3a1f5b95b7c02bf57f5"><code>b3e8342</code></a>
      Bump to version 1.3.1</li>
      <li><a
      href="https://github.com/rust-fuzz/arbitrary/commit/c1fa740bb777940bda77a4154d035805b4ecce5b"><code>c1fa740</code></a>
      Merge pull request <a
      href="https://redirect.github.com/rust-fuzz/arbitrary/issues/159">#159</a>
      from fitzgen/arbitrary-take-rest-and-collections-of-c...</li>
      <li><a
      href="https://github.com/rust-fuzz/arbitrary/commit/f19fd7a512fe953e902954d01fe046475d8f01a7"><code>f19fd7a</code></a>
      Add clippy allow for existing code running afoul of new clippy lint</li>
      <li><a
      href="https://github.com/rust-fuzz/arbitrary/commit/27560f182b5f0feb8dbd70791cbadd6fbd622411"><code>27560f1</code></a>
      Fix <code>Unstructured::arbitrary_take_rest_iter</code> for collections
      of collections</li>
      <li><a
      href="https://github.com/rust-fuzz/arbitrary/commit/80d6bfe5e8c864a05ed8c1f0a107bca632ea8c61"><code>80d6bfe</code></a>
      Merge pull request <a
      href="https://redirect.github.com/rust-fuzz/arbitrary/issues/157">#157</a>
      from jyn514/ip-addr</li>
      <li><a
      href="https://github.com/rust-fuzz/arbitrary/commit/7d3364edb6a39554c4b97f0d0548289f001121fe"><code>7d3364e</code></a>
      impl Arbitrary for IpAddr</li>
      <li><a
      href="https://github.com/rust-fuzz/arbitrary/commit/0bdbec8a9fdf19a18e6cb8ffe4022b9a6a588cf2"><code>0bdbec8</code></a>
      Merge pull request <a
      href="https://redirect.github.com/rust-fuzz/arbitrary/issues/151">#151</a>
      from Ekleog-NEAR/patch-2</li>
      <li>Additional commits viewable in <a
      href="https://github.com/rust-fuzz/arbitrary/compare/v1.3.0...v1.3.2">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=arbitrary&package-manager=cargo&previous-version=1.3.0&new-version=1.3.2)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      b57e53dc
    • dependabot[bot]'s avatar
      Bump docify from 0.2.6 to 0.2.7 (#3036) · c4028a5d
      dependabot[bot] authored
      
      
      Bumps [docify](https://github.com/sam0x17/docify) from 0.2.6 to 0.2.7.
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/sam0x17/docify/releases">docify's
      releases</a>.</em></p>
      <blockquote>
      <h2>v0.2.7</h2>
      <p>updates toml to 0.8</p>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/sam0x17/docify/commit/a6bb26159613db316c14392215f08479d60093e1"><code>a6bb261</code></a>
      bump to v0.2.7</li>
      <li><a
      href="https://github.com/sam0x17/docify/commit/22b6e0cbedb47cf86dd8e9b394557508a6af20d0"><code>22b6e0c</code></a>
      Merge pull request <a
      href="https://redirect.github.com/sam0x17/docify/issues/24">#24</a> from
      kayabaNerve/main</li>
      <li><a
      href="https://github.com/sam0x17/docify/commit/19d3cd625d3d4f699d1aeeb6d08a8408b495724b"><code>19d3cd6</code></a>
      toml 0.8</li>
      <li>See full diff in <a
      href="https://github.com/sam0x17/docify/compare/v0.2.6...v0.2.7">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=docify&package-manager=cargo&previous-version=0.2.6&new-version=0.2.7)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      c4028a5d
  17. Jan 23, 2024
    • Niklas Adolfsson's avatar
      rpc: backpressured RPC server (bump jsonrpsee 0.20) (#1313) · e16ef086
      Niklas Adolfsson authored
      This is a rather big change in jsonrpsee, the major things in this bump
      are:
      - Server backpressure (the subscription impls are modified to deal with
      that)
      - Allow custom error types / return types (remove jsonrpsee::core::Error
      and jsonrpee::core::CallError)
      - Bug fixes (graceful shutdown in particular not used by substrate
      anyway)
         - Less dependencies for the clients in particular
         - Return type requires Clone in method call responses
         - Moved to tokio channels
         - Async subscription API (not used in this PR)
      
      Major changes in this PR:
      - The subscriptions are now bounded and if subscription can't keep up
      with the server it is dropped
      - CLI: add parameter to configure the jsonrpc server bounded message
      buffer (default is 64)
      - Add our own subscription helper to deal with the unbounded streams in
      substrate
      
      The most important things in this PR to review is the added helpers
      functions in `substrate/client/rpc/src/utils.rs` and the rest is pretty
      much chore.
      
      Regarding the "bounded buffer limit" it may cause the server to handle
      the JSON-RPC calls
      slower than before.
      
      The message size limit is bounded by "--rpc-response-size" thus "by
      default 10MB * 64 = 640MB"
      but the subscription message size is not covered by this limit and could
      be capped as well.
      
      Hopefully the last release prior to 1.0, sorry in advance for a big PR
      
      Previous attempt: https://github.com/paritytech/substrate/pull/13992
      
      Resolves https://github.com/paritytech/polkadot-sdk/issues/748, resolves
      https://github.com/paritytech/polkadot-sdk/issues/627
      e16ef086
    • dependabot[bot]'s avatar
      Bump substrate-bip39 from 0.4.4 to 0.4.5 (#3025) · 76c37c93
      dependabot[bot] authored
      
      
      Bumps [substrate-bip39](https://github.com/paritytech/substrate-bip39)
      from 0.4.4 to 0.4.5.
      <details>
      <summary>Commits</summary>
      <ul>
      <li>See full diff in <a
      href="https://github.com/paritytech/substrate-bip39/commits/v0.4.5">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=substrate-bip39&package-manager=cargo&previous-version=0.4.4&new-version=0.4.5)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      76c37c93
  18. Jan 22, 2024
  19. Jan 19, 2024
  20. Jan 18, 2024
    • Michal Kucharczyk's avatar
      `GenesisBuilder`: `arbitrary_precision` feature enabled for `serde_json` (#2987) · 87927bbd
      Michal Kucharczyk authored
      [`arbitrary_precision`](https://github.com/serde-rs/json/blob/6d44b9fac9269b4decf76acac5d68e8ec9d10c58/Cargo.toml#L69-L75)
      feature allows to (de-)serialize big numbers w/o error.
      For some details refer also to
      https://github.com/paritytech/polkadot-sdk/pull/1256#discussion_r1455564450
      
      fixes: #2963
      87927bbd
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 1 update (#2953) · 1113fce5
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 1 update:
      [clap](https://github.com/clap-rs/clap).
      
      Updates `clap` from 4.4.16 to 4.4.18
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/releases">clap's
      releases</a>.</em></p>
      <blockquote>
      <h2>v4.4.18</h2>
      <h2>[4.4.18] - 2024-01-16</h2>
      <h3>Fixes</h3>
      <ul>
      <li><em>(error)</em> When lacking <code>usage</code> feature, ensure the
      list of required arguments is unique</li>
      </ul>
      <h2>v4.4.17</h2>
      <h2>[4.4.17] - 2024-01-15</h2>
      <h3>Fixes</h3>
      <ul>
      <li>Fix <code>panic!</code> when mixing
      <code>args_conflicts_with_subcommands</code> with <code>ArgGroup</code>
      (which is implicit with <code>derive</code>) introduced in 4.4.15</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.4.18] - 2024-01-16</h2>
      <h3>Fixes</h3>
      <ul>
      <li><em>(error)</em> When lacking <code>usage</code> feature, ensure the
      list of required arguments is unique</li>
      </ul>
      <h2>[4.4.17] - 2024-01-15</h2>
      <h3>Fixes</h3>
      <ul>
      <li>Fix <code>panic!</code> when mixing
      <code>args_conflicts_with_subcommands</code> with <code>ArgGroup</code>
      (which is implicit with <code>derive</code>) introduced in 4.4.15</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/0134f45ff0e2e2be8c451565e4fbf5d3cb7b7cfd"><code>0134f45</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/995ee032779d802606e599caf4f498ea51e92e82"><code>995ee03</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/2f1890907ed4e78674feeb96df34cfb813b84686"><code>2f18909</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5314">#5314</a>
      from epage/required</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/0a635b9a20077e2f932a9baee527052d8ed45d9e"><code>0a635b9</code></a>
      fix(parser): Don't duplicate requireds when usage disabled</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/e648e086f3934afb40b121b5999b9e23657ddc28"><code>e648e08</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5311">#5311</a>
      from sourcefrog/doc-exitcode</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/8c83971b8c356b8c9abfbbb2320cb946a2ee8139"><code>8c83971</code></a>
      docs: Link to exit code info</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/b250c0b5f5920b59e551bf0ec90e17c6103ae4a2"><code>b250c0b</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5310">#5310</a>
      from epage/pty</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/c742b8eb0ca648b645b616e064e00408944f390e"><code>c742b8e</code></a>
      chore(complete): Update completest-pty</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/f524d84c1d3eca1c980c5150c750d9e00cbbdb0c"><code>f524d84</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/944fb81cf593af1cd3a58dd959c934f0ff483182"><code>944fb81</code></a>
      docs: Update changelog</li>
      <li>Additional commits viewable in <a
      href="https://github.com/clap-rs/clap/compare/v4.4.16...v4.4.18">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.16&new-version=4.4.18)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      Co-authored-by: default avatarBastian Köcher <[email protected]>
      Co-authored-by: default avatarDónal Murray <[email protected]>
      1113fce5
    • Samuel Moelius's avatar
      Fix typo in traits.rs (#2971) · d6c0f153
      Samuel Moelius authored
      
      
      Co-authored-by: default avatarjoe petrowski <[email protected]>
      d6c0f153
  21. Jan 16, 2024
  22. Jan 15, 2024
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 1 update (#2926) · ac303406
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 1 update:
      [clap](https://github.com/clap-rs/clap).
      
      Updates `clap` from 4.4.14 to 4.4.16
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/releases">clap's
      releases</a>.</em></p>
      <blockquote>
      <h2>v4.4.16</h2>
      <h2>[4.4.16] - 2024-01-12</h2>
      <h3>Fixes</h3>
      <ul>
      <li>Ensure invalid escape sequences in user-defined strings are
      correctly stripped when terminal doesn't support color</li>
      </ul>
      <h2>v4.4.15</h2>
      <h2>[4.4.15] - 2024-01-11</h2>
      <h3>Fixes</h3>
      <ul>
      <li>Improve error for <code>args_conflicts_with_subcommands</code></li>
      <li>Ensure we error for <code>args_conflicts_with_subcommands</code>
      when using subcommand short and long flags</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.4.16] - 2024-01-12</h2>
      <h3>Fixes</h3>
      <ul>
      <li>Ensure invalid escape sequences in user-defined strings are
      correctly stripped when terminal doesn't support color</li>
      </ul>
      <h2>[4.4.15] - 2024-01-11</h2>
      <h3>Fixes</h3>
      <ul>
      <li>Improve error for <code>args_conflicts_with_subcommands</code></li>
      <li>Ensure we error for <code>args_conflicts_with_subcommands</code>
      when using subcommand short and long flags</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/cbc9c9dd44fc4be25c196213d508b9d2a9c282f3"><code>cbc9c9d</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/4718b89486c7c4236a18411b8449afc2d93f8e3d"><code>4718b89</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/38f805cea0cf50a0f26ed01e4fdf550ca8a555fa"><code>38f805c</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5299">#5299</a>
      from epage/ansi</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/2a3356a53543531726e851e97639810f3828a89b"><code>2a3356a</code></a>
      fix: Update anstream</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/12b5c39d467ea147c21f5eb3063fc0bc2538e9b7"><code>12b5c39</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/1c5b63390babdb4f3a8994436da4e7f9239b7d43"><code>1c5b633</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/a5d46410e072b9821f76b21839849c4434a2f8da"><code>a5d4641</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5298">#5298</a>
      from epage/conflict</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/f529ec398c4262296d5e6eb063b1b52d875d7f03"><code>f529ec3</code></a>
      fix(parser): Ensure subcommand flags can conflict</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/a7e04a53e4a9e310663a0cdb5bfb0753d84b82bd"><code>a7e04a5</code></a>
      fix(parser): Improve subcommand conflict error</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/ea00ef3051fd5a993b766062a4e9defc777bf233"><code>ea00ef3</code></a>
      refactor(error): Allow more conflict sources</li>
      <li>Additional commits viewable in <a
      href="https://github.com/clap-rs/clap/compare/v4.4.14...v4.4.16">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.14&new-version=4.4.16)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      ac303406
  23. Jan 10, 2024
    • dependabot[bot]'s avatar
      Bump trybuild from 1.0.83 to 1.0.88 (#2902) · a56ad80a
      dependabot[bot] authored
      
      
      Bumps [trybuild](https://github.com/dtolnay/trybuild) from 1.0.83 to
      1.0.88.
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/dtolnay/trybuild/releases">trybuild's
      releases</a>.</em></p>
      <blockquote>
      <h2>1.0.88</h2>
      <ul>
      <li>Work around <code>dead_code</code> warning false positive (<a
      href="https://redirect.github.com/dtolnay/trybuild/issues/253">#253</a>)</li>
      </ul>
      <h2>1.0.87</h2>
      <ul>
      <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
      such as sccache</li>
      </ul>
      <h2>1.0.86</h2>
      <ul>
      <li>Support edition 2024 (<a
      href="https://redirect.github.com/dtolnay/trybuild/issues/250">#250</a>,
      <a
      href="https://redirect.github.com/dtolnay/trybuild/issues/252">#252</a>,
      thanks <a
      href="https://github.com/mohe2015"><code>@​mohe2015</code></a>)</li>
      </ul>
      <h2>1.0.85</h2>
      <ul>
      <li>Set thread name to produce better message on panic (<a
      href="https://redirect.github.com/dtolnay/trybuild/issues/243">#243</a>,
      <a
      href="https://redirect.github.com/dtolnay/trybuild/issues/244">#244</a>)</li>
      </ul>
      <h2>1.0.84</h2>
      <ul>
      <li>Stabilize usage of Cargo's <code>--keep-going</code> build mode,
      which parallelizes test compilation for a significant speedup (<a
      href="https://redirect.github.com/rust-lang/cargo/pull/12568">rust-lang/cargo#12568</a>,
      <a
      href="https://redirect.github.com/dtolnay/trybuild/issues/240">#240</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/dtolnay/trybuild/commit/52caff6811ac288418209c7c7e2da28583bb1f4d"><code>52caff6</code></a>
      Release 1.0.88</li>
      <li><a
      href="https://github.com/dtolnay/trybuild/commit/0321a01898a69905a74c3aab2519219939f133fa"><code>0321a01</code></a>
      Merge pull request <a
      href="https://redirect.github.com/dtolnay/trybuild/issues/253">#253</a>
      from dtolnay/deadflock</li>
      <li><a
      href="https://github.com/dtolnay/trybuild/commit/b720ee6e5cd44ab7d8ab140a020006e0db6270a4"><code>b720ee6</code></a>
      Work around dead_code warning in flock implementation</li>
      <li><a
      href="https://github.com/dtolnay/trybuild/commit/0081291b6bb5d19b92d19f1fc9c1d32ed539a129"><code>0081291</code></a>
      Release 1.0.87</li>
      <li><a
      href="https://github.com/dtolnay/trybuild/commit/e0c4c0d7c8581d46366668eee28dbf6ec790178b"><code>e0c4c0d</code></a>
      Pull in proc-macro2 sccache fix</li>
      <li><a
      href="https://github.com/dtolnay/trybuild/commit/a6cbfe8b08978660b92259d1f6642c2812e9ffe7"><code>a6cbfe8</code></a>
      Release 1.0.86</li>
      <li><a
      href="https://github.com/dtolnay/trybuild/commit/7c5a8fef4e4f4e85bec2dd888434c310ec479f21"><code>7c5a8fe</code></a>
      Merge pull request <a
      href="https://redirect.github.com/dtolnay/trybuild/issues/252">#252</a>
      from dtolnay/cargofeatures</li>
      <li><a
      href="https://github.com/dtolnay/trybuild/commit/d3cd15bf3081ddbd4720984001e3f2a09f53d621"><code>d3cd15b</code></a>
      Propagate cargo features from source manifest</li>
      <li><a
      href="https://github.com/dtolnay/trybuild/commit/c28428dcb57a735c16b25745298f045ffb5782bb"><code>c28428d</code></a>
      Merge pull request <a
      href="https://redirect.github.com/dtolnay/trybuild/issues/251">#251</a>
      from dtolnay/skipcargofeatures</li>
      <li><a
      href="https://github.com/dtolnay/trybuild/commit/3e4029ede75d98b9164136852689a7ca5602108e"><code>3e4029e</code></a>
      Omit cargo-features from generated Cargo.toml if empty</li>
      <li>Additional commits viewable in <a
      href="https://github.com/dtolnay/trybuild/compare/1.0.83...1.0.88">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=trybuild&package-manager=cargo&previous-version=1.0.83&new-version=1.0.88)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      a56ad80a
  24. Jan 09, 2024
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 1 update (#2881) · 14f49002
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 1 update:
      [clap](https://github.com/clap-rs/clap).
      
      Updates `clap` from 4.4.13 to 4.4.14
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/releases">clap's
      releases</a>.</em></p>
      <blockquote>
      <h2>v4.4.14</h2>
      <h2>[4.4.14] - 2024-01-08</h2>
      <h3>Documentation</h3>
      <ul>
      <li>Fix <code>find</code> cookbook entry to allow repeats of
      flags/options</li>
      </ul>
      <h3>Features</h3>
      <ul>
      <li>Allow <code>num_args(0)</code> on options which allows making them
      emulate being a flag for position-tracking flags</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.4.14] - 2024-01-08</h2>
      <h3>Documentation</h3>
      <ul>
      <li>Fix <code>find</code> cookbook entry to allow repeats of
      flags/options</li>
      </ul>
      <h3>Features</h3>
      <ul>
      <li>Allow <code>num_args(0)</code> on options which allows making them
      emulate being a flag for position-tracking flags</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/514f28bc92ed683d53292cbe9457db3ec5df7b6f"><code>514f28b</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/1440456d3ddaa6d9624297d83de9bb9abe82f10b"><code>1440456</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/d6479ff7ddbcf524146428c92be23273b4f8bac5"><code>d6479ff</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5290">#5290</a>
      from epage/or</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/02f82146ad746ce9d1874e38ec7033150bb12622"><code>02f8214</code></a>
      docs(cookbook): Clarify intent of fake flags</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/c603f34574832b8894b44e0f67fd19dc7869e808"><code>c603f34</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5275">#5275</a>
      from epage/ci</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/641b42b2e82086775619bd15854ddb5b80311b49"><code>641b42b</code></a>
      chore(ci): Speed up critical path of CI</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/3eaf1af052bd5255cc2440dc1cc8f80831a3428b"><code>3eaf1af</code></a>
      fix(help): Correctly show help for fake flags</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/d63106b9f698df0d2241662ab1459c823890dec4"><code>d63106b</code></a>
      docs(cookbook): Allow repeated operators</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/148e102ac37bd0e5ca99cfe9c5d57ffc6243cf66"><code>148e102</code></a>
      fix(builder): Allow custom flag definitions</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/d53d881e339fec64e48990170b542fae4140eaaa"><code>d53d881</code></a>
      docs(cookbook): Demonstrate bad 'find' behavior</li>
      <li>See full diff in <a
      href="https://github.com/clap-rs/clap/compare/v4.4.13...v4.4.14">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.13&new-version=4.4.14)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      14f49002
  25. Jan 08, 2024
    • Bastian Köcher's avatar
      Make `simple-mermaid` optional (#2878) · 1914775b
      Bastian Köcher authored
      This prevents it leaking `std` into `no_std` builds.
      
      Closes: https://github.com/paritytech/polkadot-sdk/issues/2866
      1914775b
    • Niklas Adolfsson's avatar
      rpc: add `rpc v2 chainSpec` to polkadot (#2859) · a97a6f20
      Niklas Adolfsson authored
      The [chainSpec RPC API from the v2
      spec](https://paritytech.github.io/json-rpc-interface-spec/api/chainSpec.html)
      was only added to substrate-node and should be added to polkadot as well
      
      /cc @lexnv
      a97a6f20
    • dependabot[bot]'s avatar
      Bump proc-macro-crate from 2.0.1 to 3.0.0 (#2876) · 82327494
      dependabot[bot] authored
      
      
      Bumps [proc-macro-crate](https://github.com/bkchr/proc-macro-crate) from
      2.0.1 to 3.0.0.
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/bkchr/proc-macro-crate/releases">proc-macro-crate's
      releases</a>.</em></p>
      <blockquote>
      <h2>v3.0.0</h2>
      <h2>What's Changed</h2>
      <ul>
      <li>Release 3.0.0 by <a
      href="https://github.com/bkchr"><code>@​bkchr</code></a> in <a
      href="https://redirect.github.com/bkchr/proc-macro-crate/pull/47">bkchr/proc-macro-crate#47</a></li>
      </ul>
      <p><strong>Full Changelog</strong>: <a
      href="https://github.com/bkchr/proc-macro-crate/compare/v2.0.1...v3.0.0">https://github.com/bkchr/proc-macro-crate/compare/v2.0.1...v3.0.0</a></p>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/bkchr/proc-macro-crate/commit/c9671b5f8c307c50aab61e2352450a620d236d8b"><code>c9671b5</code></a>
      Merge pull request <a
      href="https://redirect.github.com/bkchr/proc-macro-crate/issues/47">#47</a>
      from bkchr/bkchrr-release-3.0.0</li>
      <li><a
      href="https://github.com/bkchr/proc-macro-crate/commit/e1a5af33e5a573c878441e38ec991fa23a1b4065"><code>e1a5af3</code></a>
      Bump Rust CI version</li>
      <li><a
      href="https://github.com/bkchr/proc-macro-crate/commit/71c28e2a2592a9dc85afbdb4bc346a0296999eed"><code>71c28e2</code></a>
      Release 3.0.0</li>
      <li>See full diff in <a
      href="https://github.com/bkchr/proc-macro-crate/compare/v2.0.1...v3.0.0">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=proc-macro-crate&package-manager=cargo&previous-version=2.0.1&new-version=3.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      82327494
  26. Jan 07, 2024
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 4 updates (#2865) · 204fe7ff
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 4 updates:
      [serde](https://github.com/serde-rs/serde),
      [serde_json](https://github.com/serde-rs/json),
      [clap](https://github.com/clap-rs/clap) and
      [syn](https://github.com/dtolnay/syn).
      
      Updates `serde` from 1.0.194 to 1.0.195
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/serde/releases">serde's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.195</h2>
      <ul>
      <li>Prevent remote definitions of tuple struct or tuple variant from
      triggering dead_code warning (<a
      href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a>
      Release 1.0.195</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>
      from dtolnay/deadremote</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a>
      Revert &quot;Add FIXME to fix dead_code warning when using
      serde(remote)&quot;</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a>
      Fix new dead_code warning in tuple struct and tuple variant remote
      defs</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a>
      Add FIXME to fix dead_code warning when using serde(remote)</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a>
      Work around dead_code warning in tests</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a>
      from serde-rs/exhaustive</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a>
      Fill in omitted patterns for GenericArguments match</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a>
      Pick up changes to non_exhaustive_omitted_patterns lint</li>
      <li>See full diff in <a
      href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `serde_json` from 1.0.110 to 1.0.111
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/json/releases">serde_json's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.111</h2>
      <ul>
      <li>Improve floating point parsing performance on loongarch64 (<a
      href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>,
      thanks <a
      href="https://github.com/heiher"><code>@​heiher</code></a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a>
      Release 1.0.111</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>
      from heiher/limb-64-la64</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a>
      Set limb width to 64 for loongarch64</li>
      <li>See full diff in <a
      href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `clap` from 4.4.12 to 4.4.13
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/releases">clap's
      releases</a>.</em></p>
      <blockquote>
      <h2>v4.4.13</h2>
      <h2>[4.4.13] - 2024-01-04</h2>
      <h3>Documentation</h3>
      <ul>
      <li>Fix link to structopt migration guide</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.4.13] - 2024-01-04</h2>
      <h3>Documentation</h3>
      <ul>
      <li>Fix link to structopt migration guide</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a>
      docs: Correct link to StructOpt migration guide</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a>
      from Manishearth/safety-docs</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a>
      Correct safety docs</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a>
      from henry-hsieh/fix-nosort</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a>
      fix: Skip nosort option below bash 4.4</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a>
      from clap-rs/renovate/actions-setup-python-5.x</li>
      <li>Additional commits viewable in <a
      href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `syn` from 2.0.47 to 2.0.48
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/dtolnay/syn/releases">syn's
      releases</a>.</em></p>
      <blockquote>
      <h2>2.0.48</h2>
      <ul>
      <li>Improve error message on unexpected token after <code>else</code>
      (<a
      href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a>
      Release 2.0.48</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a>
      Merge pull request <a
      href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>
      from dtolnay/elseblock</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a>
      Fix error message on unexpected token after 'else'</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a>
      Merge pull request <a
      href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a>
      from dtolnay/exhaustive</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a>
      Pick up changes to non_exhaustive_omitted_patterns lint</li>
      <li>See full diff in <a
      href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      204fe7ff
  27. Jan 06, 2024
    • Serban Iorga's avatar
      Kitchensink chain: Add BEEFY support (#2856) · 2e4b8996
      Serban Iorga authored
      Related to https://github.com/paritytech/polkadot-sdk/issues/2787
      
      Adding BEEFY support to the kitchensink chain in order to be able to
      extend the current warp sync zombienet tests with BEEFY enabled
      2e4b8996
  28. Jan 04, 2024
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 4 updates (#2845) · 88e7b49c
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 4 updates:
      [serde](https://github.com/serde-rs/serde),
      [serde_json](https://github.com/serde-rs/json),
      [clap](https://github.com/clap-rs/clap) and
      [serde_yaml](https://github.com/dtolnay/serde-yaml).
      
      Updates `serde` from 1.0.193 to 1.0.194
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/serde/releases">serde's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.194</h2>
      <ul>
      <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
      such as sccache</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a>
      Release 1.0.194</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a>
      Pull in proc-macro2 sccache fix</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a>
      from dtolnay/optionifletelse</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a>
      Remove option_if_let_else clippy suppression</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a>
      Work around doc_link_with_quotes pedantic clippy lint</li>
      <li>See full diff in <a
      href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `serde_json` from 1.0.108 to 1.0.110
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/json/releases">serde_json's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.109</h2>
      <ul>
      <li>Documentation improvements</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a>
      Release 1.0.110</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a>
      Pull in proc-macro2 sccache fix</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a>
      Release 1.0.109</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a>
      from serde-rs/doccfg</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a>
      Restore doc cfg on re-exports</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a>
      from dtolnay/hashtest</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a>
      Eliminate hash closure in favor of calling hash_one directly</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a>
      Use BuildHasher::hash_one</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a>
      Use random hasher state for number hashing test</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a>
      Delete trace_macros! functionality from test</li>
      <li>Additional commits viewable in <a
      href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `clap` from 4.4.11 to 4.4.12
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/releases">clap's
      releases</a>.</em></p>
      <blockquote>
      <h2>v4.4.12</h2>
      <h2>[4.4.12] - 2023-12-28</h2>
      <h3>Performance</h3>
      <ul>
      <li>Only ask <code>TypedValueParser</code> for possible values if
      needed</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.4.12] - 2023-12-28</h2>
      <h3>Performance</h3>
      <ul>
      <li>Only ask <code>TypedValueParser</code> for possible values if
      needed</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a>
      from vermiculus/sa/avoid-pv-expansion-in-help</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a>
      perf: Avoid retrieving possible_values unless used</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a>
      test: Update snapshots</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a>
      docs(complete): Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a>
      docs(complete): Polish API reference for dynamic</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a>
      from epage/docsrs</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a>
      docs: Include more content on docs.rs</li>
      <li>See full diff in <a
      href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `serde_yaml` from 0.9.29 to 0.9.30
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
      releases</a>.</em></p>
      <blockquote>
      <h2>0.9.30</h2>
      <ul>
      <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
      such as sccache</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a>
      Release 0.9.30</li>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a>
      Pull in proc-macro2 sccache fix</li>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a>
      Merge pull request <a
      href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a>
      from dtolnay/optionifletelse</li>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a>
      Remove option_if_let_else clippy suppression</li>
      <li>See full diff in <a
      href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      88e7b49c