- Dec 07, 2023
-
-
eskimor authored
-
eskimor authored
-
eskimor authored
-
eskimor authored
-
Marcin S. authoredWasn't sure what to do about `NoOnDemandCores` assert. I guess that error was removed because there are always on-demand cores? Can the non-compiling test just be removed?
-
-
eskimor authored
-
eskimor authored
-
Oliver Tale-Yazdi authoredCloses https://github.com/paritytech/polkadot-sdk/issues/2319 Changes: - Ensure that only `enqueue_message(s)` is callable from within the message processor. This prevents messed up storage that can currently happen when the pallet is called into recursively. - Use `H256` instead of `[u8; 32]` for clearer API. ## Details The re-entracy check is done with the `environmental` crate by adding a `with_service_mutex(f)` function that runs the closure exclusively. This works since the MQ pallet is not instantiable. --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]>
-
dzmitry-lahoda authored
# Description - What does this PR do? Allows to generate JSON schema for subset of XCM in std builds - Why are these changes needed? To support XCM messages in CosmWasm contracts which require Schemars to generate contract clients - How were these changes implemented and what do they affect? We will use schema feature flag to build XCM pallet with JSON schema enabled # Checklist - [x] My PR includes a detailed description as outlined in the "Description" section above - [x] My PR follows the [labeling requirements](CONTRIBUTING.md#Process) of this project (at minimum one label for `T` required) - [x] I have made corresponding changes to the documentation (if applicable) - [x] I have added tests that prove my fix is effective or that my feature works (if applicable) - [x] If this PR alters any external APIs or interfaces used by Polkadot, the corresponding Polkadot PR is ready as well as the corresponding Cumulus PR (optional)
-
Bastian Köcher authored
Closes: https://github.com/paritytech/polkadot-sdk/issues/2641
-
eskimor authored
Co-authored-by:Bastian Köcher <[email protected]>
-
eskimor authored
Co-authored-by: -
eskimor authored
Co-authored-by: -
eskimor authored
Co-authored-by: -
eskimor authored
Co-authored-by:Anton Vilhelm Ásgeirsson <[email protected]>
-
eskimor authored
Co-authored-by:Marcin S. <[email protected]>
-
eskimor authored
Co-authored-by: -
eskimor authored
Co-authored-by: -
eskimor authored
Co-authored-by: -
antonva authored
-
Anwesh authored
-
dependabot[bot] authored
Bumps [rand](https://github.com/rust-random/rand) from 0.7.3 to 0.8.5. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/rust-random/rand/blob/master/CHANGELOG.md">rand's changelog</a>.</em></p> <blockquote> <h2>[0.8.5] - 2021-08-20</h2> <h3>Fixes</h3> <ul> <li>Fix build on non-32/64-bit architectures (<a href="https://redirect.github.com/rust-random/rand/issues/1144">#1144</a>)</li> <li>Fix "min_const_gen" feature for <code>no_std</code> (<a href="https://redirect.github.com/rust-random/rand/issues/1173">#1173</a>)</li> <li>Check <code>libc::pthread_atfork</code> return value with panic on error (<a href="https://redirect.github.com/rust-random/rand/issues/1178">#1178</a>)</li> <li>More robust reseeding in case <code>ReseedingRng</code> is used from a fork handler (<a href="https://redirect.github.com/rust-random/rand/issues/1178">#1178</a>)</li> <li>Fix nightly: remove unused <code>slice_partition_at_index</code> feature (<a href="https://redirect.github.com/rust-random/rand/issues/1215">#1215</a>)</li> <li>Fix nightly + <code>simd_support</code>: update <code>packed_simd</code> (<a href="https://redirect.github.com/rust-random/rand/issues/1216">#1216</a>)</li> </ul> <h3>Rngs</h3> <ul> <li><code>StdRng</code>: Switch from HC128 to ChaCha12 on emscripten (<a href="https://redirect.github.com/rust-random/rand/issues/1142">#1142</a>). We now use ChaCha12 on all platforms.</li> </ul> <h3>Documentation</h3> <ul> <li>Added docs about rand's use of const generics (<a href="https://redirect.github.com/rust-random/rand/issues/1150">#1150</a>)</li> <li>Better random chars example (<a href="https://redirect.github.com/rust-random/rand/issues/1157">#1157</a>)</li> </ul> <h2>[0.8.4] - 2021-06-15</h2> <h3>Additions</h3> <ul> <li>Use const-generics to support arrays of all sizes (<a href="https://redirect.github.com/rust-random/rand/issues/1104">#1104</a>)</li> <li>Implement <code>Clone</code> and <code>Copy</code> for <code>Alphanumeric</code> (<a href="https://redirect.github.com/rust-random/rand/issues/1126">#1126</a>)</li> <li>Add <code>Distribution::map</code> to derive a distribution using a closure (<a href="https://redirect.github.com/rust-random/rand/issues/1129">#1129</a>)</li> <li>Add <code>Slice</code> distribution (<a href="https://redirect.github.com/rust-random/rand/issues/1107">#1107</a>)</li> <li>Add <code>DistString</code> trait with impls for <code>Standard</code> and <code>Alphanumeric</code> (<a href="https://redirect.github.com/rust-random/rand/issues/1133">#1133</a>)</li> </ul> <h3>Other</h3> <ul> <li>Reorder asserts in <code>Uniform</code> float distributions for easier debugging of non-finite arguments (<a href="https://redirect.github.com/rust-random/rand/issues/1094">#1094</a>, <a href="https://redirect.github.com/rust-random/rand/issues/1108">#1108</a>)</li> <li>Add range overflow check in <code>Uniform</code> float distributions (<a href="https://redirect.github.com/rust-random/rand/issues/1108">#1108</a>)</li> <li>Deprecate <code>rngs::adapter::ReadRng</code> (<a href="https://redirect.github.com/rust-random/rand/issues/1130">#1130</a>)</li> </ul> <h2>[0.8.3] - 2021-01-25</h2> <h3>Fixes</h3> <ul> <li>Fix <code>no-std</code> + <code>alloc</code> build by gating <code>choose_multiple_weighted</code> on <code>std</code> (<a href="https://redirect.github.com/rust-random/rand/issues/1088">#1088</a>)</li> </ul> <h2>[0.8.2] - 2021-01-12</h2> <h3>Fixes</h3> <ul> <li>Fix panic in <code>UniformInt::sample_single_inclusive</code> and <code>Rng::gen_range</code> when providing a full integer range (eg <code>0..=MAX</code>) (<a href="https://redirect.github.com/rust-random/rand/issues/1087">#1087</a>)</li> </ul> <h2>[0.8.1] - 2020-12-31</h2> <h3>Other</h3> <ul> <li>Enable all stable features in the playground (<a href="https://redirect.github.com/rust-random/rand/issues/1081">#1081</a>)</li> </ul> <h2>[0.8.0] - 2020-12-18</h2> <h3>Platform support</h3> <ul> <li>The minimum supported Rust version is now 1.36 (<a href="https://redirect.github.com/rust-random/rand/issues/1011">#1011</a>)</li> <li><code>getrandom</code> updated to v0.2 (<a href="https://redirect.github.com/rust-random/rand/issues/1041">#1041</a>)</li> <li>Remove <code>wasm-bindgen</code> and <code>stdweb</code> feature flags. For details of WASM support,</li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/rust-random/rand/commit/937320cbfeebd4352a23086d9c6e68f067f74644"><code>937320c</code></a> Update CHANGELOG for 0.8.5 (<a href="https://redirect.github.com/rust-random/rand/issues/1221">#1221</a>)</li> <li><a href="https://github.com/rust-random/rand/commit/2924af688d352b889322870d017356f12651866b"><code>2924af6</code></a> Merge pull request <a href="https://redirect.github.com/rust-random/rand/issues/1183">#1183</a> from vks/fill-float-doc</li> <li><a href="https://github.com/rust-random/rand/commit/dbbc1bf3176138c867f3d84c0c4d288119a5a84e"><code>dbbc1bf</code></a> Merge pull request <a href="https://redirect.github.com/rust-random/rand/issues/1218">#1218</a> from Will-Low/master</li> <li><a href="https://github.com/rust-random/rand/commit/9f20df04d88698c38515833d6db62d7eb50d8b80"><code>9f20df0</code></a> Making distributions comparable by deriving PartialEq. Tests included</li> <li><a href="https://github.com/rust-random/rand/commit/a407bdfa4563d0cfbf744049242926c8de079d3f"><code>a407bdf</code></a> Merge pull request <a href="https://redirect.github.com/rust-random/rand/issues/1216">#1216</a> from rust-random/work5</li> <li><a href="https://github.com/rust-random/rand/commit/d3ca11b0bcc1f42fe34ba4f90f99509b7eb4ff18"><code>d3ca11b</code></a> Update to packed_simd_2 0.3.7</li> <li><a href="https://github.com/rust-random/rand/commit/fa04c15d0bb5842fdbdbb73d7a53ead36f3fcf52"><code>fa04c15</code></a> Merge pull request <a href="https://redirect.github.com/rust-random/rand/issues/1215">#1215</a> from Lantern-chat/master</li> <li><a href="https://github.com/rust-random/rand/commit/73f8ffd16379390e624ac53cd6882dd679dd9a6f"><code>73f8ffd</code></a> Remove unused <code>slice_partition_at_index</code> feature</li> <li><a href="https://github.com/rust-random/rand/commit/8f372500f05dfadcff6c35e773e81029ab7debad"><code>8f37250</code></a> Merge pull request <a href="https://redirect.github.com/rust-random/rand/issues/1208">#1208</a> from newpavlov/rand_distr/fix_no_std</li> <li><a href="https://github.com/rust-random/rand/commit/9ef737ba5b814f6ab36cebafb59ad29885d68a05"><code>9ef737b</code></a> update changelog</li> <li>Additional commits viewable in <a href="https://github.com/rust-random/rand/compare/0.7.3...0.8.5">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores ) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
Egor_P authored
This PR adds missing `environment: release` parameter to the `rc-automation ` GHA
-
Alexander Samusev authored
close https://github.com/paritytech/ci_cd/issues/900
-
eskimor authored
-
Nazar Mokrynskyi authored
# Description Trivial change that resolves https://github.com/paritytech/polkadot-sdk/issues/2185 . Since there was a mix of `who` and `peer_id` argument names nearby I changed them all to `peer_id`. # Checklist - [x] My PR includes a detailed description as outlined in the "Description" section above - [x] My PR follows the [labeling requirements](CONTRIBUTING.md#Process) of this project (at minimum one label for `T` required) - [x] I have made corresponding changes to the documentation (if applicable) - [ ] I have added tests that prove my fix is effective or that my feature works (if applicable) --------- Co-authored-by:
-
Alexander Samusev authored
cc https://github.com/paritytech/ci_cd/issues/900 --------- Signed-off-by:
Dónal Murray <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
-
- Dec 06, 2023
-
-
Bastian Köcher authored
- Remove the old Cumulus checks as these files do not exist anymore - Relax requirements on CI files to also give two core devs the right to change these files - Relax requirements on the review bot configuration itself as well.
-
Svyatoslav Nikolsky authored
As suggested in this thread: https://github.com/polkadot-fellows/runtimes/pull/87#discussion_r1400237122 We already have the `IsChildSystemParachain`, which may be used at relay chain, but it can't be used at a parachain level. So let's use `AllSiblingSystemParachains` for that. I was thinking about `AllSystemParachains`, but it may cause wrong impression that it can be used at a relay chain level. --------- Co-authored-by:
joe petrowski <[email protected]>
-
juangirini authored
Closes https://github.com/paritytech/polkadot-sdk-docs/issues/69
-
Branislav Kontur authored
## Summary This PR aligns Rococo/Westend bridge with latest Bridges repo development: - https://github.com/paritytech/parity-bridges-common/pull/2727 - https://github.com/paritytech/parity-bridges-common/pull/2728 - https://github.com/paritytech/parity-bridges-common/pull/2729 Part of: https://github.com/paritytech/parity-bridges-common/issues/2452
-
eskimor authored
-
Adrian Catangiu authored
# Motivation (+testing) ### Enable easy `ForeignAssets` transfers using `pallet-xcm` We had just previously added capabilities to teleport fees during reserve-based transfers, but what about reserve-transferring fees when needing to teleport some non-fee asset? This PR aligns everything under either explicit reserve-transfer, explicit teleport, or this new flexible `transfer_assets()` which can mix and match as needed with fewer artificial constraints imposed to the user. This will enable, for example, a (non-system) parachain to teleport their `ForeignAssets` assets to AssetHub while using DOT to pay fees. (the assets are teleported - as foreign assets should from their owner chain - while DOT used for fees can only be reserve-based transferred between said parachain and AssetHub). Added `xcm-emulator` tests for this scenario ^. # Description Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based transfers for all `assets` including fees. Similarly `(limited_)teleport_assets` only allows teleports for all `assets` including fees. For complex combinations of asset transfers where assets and fees may have different reserves or different reserve/teleport trust configurations, users can use the newly added `transfer_assets()` extrinsic which is more flexible in allowing more complex scenarios. `assets` (excluding `fees`) must have same reserve location or otherwise be teleportable to `dest`. No limitations imposed on `fees`. - for local reserve: transfer assets to sovereign account of destination chain and forward a notification XCM to `dest` to mint and deposit reserve-based assets to `beneficiary`. - for destination reserve: burn local assets and forward a notification to `dest` chain to withdraw the reserve assets from this chain's sovereign account and deposit them to `beneficiary`. - for remote reserve: burn local assets, forward XCM to reserve chain to move reserves from this chain's SA to `dest` chain's SA, and forward another XCM to `dest` to mint and deposit reserve-based assets to `beneficiary`. - for teleports: burn local assets and forward XCM to `dest` chain to mint/teleport assets and deposit them to `beneficiary`. ## Review notes Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the rest of the PR is new tests and improving existing tests. --------- Co-authored-by: command-bot <> -
eskimor authored
-
Alexander Samusev authored
-
dependabot[bot] authored
Bumps [parity-db](https://github.com/paritytech/parity-db) from 0.4.10 to 0.4.12. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/paritytech/parity-db/blob/master/CHANGELOG.md">parity-db's changelog</a>.</em></p> <blockquote> <h2>[v0.4.12] - 2023-10-12</h2> <ul> <li>CI for windows and macos. Also fixes access denied error on windows <a href="https://redirect.github.com/paritytech/parity-db/pull/222"><code>[#222](https://github.com/paritytech/parity-db/issues/222)</code></a></li> <li>Force alignment for all chunk buffers <a href="https://redirect.github.com/paritytech/parity-db/pull/225"><code>[#225](https://github.com/paritytech/parity-db/issues/225)</code></a></li> </ul> <h2>[v0.4.11] - 2023-09-13</h2> <ul> <li>Make <code>madvise_random</code> compatible with non-Unix OS <a href="https://redirect.github.com/paritytech/parity-db/pull/221"><code>[#221](https://github.com/paritytech/parity-db/issues/221)</code></a></li> <li>Explicit <code>funlock</code> <a href="https://redirect.github.com/paritytech/parity-db/pull/218"><code>[#218](https://github.com/paritytech/parity-db/issues/218)</code></a></li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/paritytech/parity-db/commit/47b6c98455f8875b6eeb980d35a2be62f64d074f"><code>47b6c98</code></a> Bump version</li> <li><a href="https://github.com/paritytech/parity-db/commit/ec686930169b84d21336bed6d6f05c787a17d61f"><code>ec68693</code></a> Force alignment for all chunk buffers (<a href="https://redirect.github.com/paritytech/parity-db/issues/225">#225</a>)</li> <li><a href="https://github.com/paritytech/parity-db/commit/4ac2aca38c6984f8a48080875590a687041a39d8"><code>4ac2aca</code></a> CI for windows and macos (<a href="https://redirect.github.com/paritytech/parity-db/issues/222">#222</a>)</li> <li><a href="https://github.com/paritytech/parity-db/commit/2c52598b9c53519b61cb078c81ea427b287558d7"><code>2c52598</code></a> Bump version</li> <li><a href="https://github.com/paritytech/parity-db/commit/f537334507bb357330753398868f040b8e9ff9d3"><code>f537334</code></a> Make <code>madvise_random</code> compatible with non-Unix OS (<a href="https://redirect.github.com/paritytech/parity-db/issues/221">#221</a>)</li> <li><a href="https://github.com/paritytech/parity-db/commit/8eae5d3e5e2a304052f7cca75eb249080f6a7790"><code>8eae5d3</code></a> Explicit funlock (<a href="https://redirect.github.com/paritytech/parity-db/issues/218">#218</a>)</li> <li>See full diff in <a href="https://github.com/paritytech/parity-db/compare/v0.4.10...v0.4.12">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores ) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
André Silva authored
This will make more sense after https://github.com/paritytech/polkadot-sdk/pull/2524 since the schnorrkel type for VRF outputs is also renamed in the latest version. Can be reviewed independently though. Can be merged after https://github.com/paritytech/polkadot-sdk/pull/1577 so that there is less pain for @davxy . --------- Co-authored-by:
-
- Dec 05, 2023
-
-
zhiqiangxu authored
Co-authored-by:Liam Aharon <[email protected]>
-
dependabot[bot] authored
Bumps [tracing-core](https://github.com/tokio-rs/tracing) from 0.1.31 to 0.1.32. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/tokio-rs/tracing/releases">tracing-core's releases</a>.</em></p> <blockquote> <h2>tracing-core 0.1.32</h2> <h3>Documented</h3> <ul> <li>Fix typo in <code>field</code> docs (<a href="https://redirect.github.com/tokio-rs/tracing/issues/2611">#2611</a>)</li> <li>Remove duplicate wording (<a href="https://redirect.github.com/tokio-rs/tracing/issues/2674">#2674</a>)</li> </ul> <h3>Changed</h3> <ul> <li>Allow <code>ValueSet</code>s of any length (<a href="https://redirect.github.com/tokio-rs/tracing/issues/2508">#2508</a>)</li> </ul> <p><a href="https://redirect.github.com/tokio-rs/tracing/issues/2611">#2611</a>: <a href="https://redirect.github.com/tokio-rs/tracing/pull/2611">tokio-rs/tracing#2611</a> <a href="https://redirect.github.com/tokio-rs/tracing/issues/2674">#2674</a>: <a href="https://redirect.github.com/tokio-rs/tracing/pull/2674">tokio-rs/tracing#2674</a> <a href="https://redirect.github.com/tokio-rs/tracing/issues/2508">#2508</a>: <a href="https://redirect.github.com/tokio-rs/tracing/pull/2508">tokio-rs/tracing#2508</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/tokio-rs/tracing/commit/c4b2a56937dd40aaa2e2991636eca6748353201f"><code>c4b2a56</code></a> chore: prepare tracing-core 0.1.32 (<a href="https://redirect.github.com/tokio-rs/tracing/issues/2754">#2754</a>)</li> <li><a href="https://github.com/tokio-rs/tracing/commit/2502f19d934b092fc01bb7493eacbb16b4038bf3"><code>2502f19</code></a> chore: prepare tracing-attributes 0.1.27 (<a href="https://redirect.github.com/tokio-rs/tracing/issues/2756">#2756</a>)</li> <li><a href="https://github.com/tokio-rs/tracing/commit/90487620d8fd4b0a44e6a0385bda3643bf6f19a2"><code>9048762</code></a> Revert "log: update to env_logger 0.10 to fix GHSA-g98v-hv3f-hcfr (<a href="https://redirect.github.com/tokio-rs/tracing/issues/2740">#2740</a>)" (#...</li> <li><a href="https://github.com/tokio-rs/tracing/commit/6ba5af2ce2a814fea521d2d0a5ea1e88d7b6011e"><code>6ba5af2</code></a> docs: remove mention of <code>Registration</code> on v0.1.x (<a href="https://redirect.github.com/tokio-rs/tracing/issues/2753">#2753</a>)</li> <li><a href="https://github.com/tokio-rs/tracing/commit/11aac9a07c4aac35b12ea82d8a5b1cb00a118928"><code>11aac9a</code></a> log: deprecate <code>env_logger</code> in favor of <code>tracing_subscriber::fmt::Subscriber</code>...</li> <li><a href="https://github.com/tokio-rs/tracing/commit/2f27752a9912f03ed64e2b29e1ea06ebb4b09e83"><code>2f27752</code></a> chore: remove <code>env_logger</code> from <code>hyper</code> example</li> <li><a href="https://github.com/tokio-rs/tracing/commit/f96846d78a3f240a2c81636a7d6921e5d74ac79f"><code>f96846d</code></a> attributes: fix typo "overriden" => "overridden" (<a href="https://redirect.github.com/tokio-rs/tracing/issues/2719">#2719</a>)</li> <li><a href="https://github.com/tokio-rs/tracing/commit/71b5b2c5792ee6cd4e98112a90f9fcd19dd1ddc0"><code>71b5b2c</code></a> subscriber: make <code>format::Writer::new()</code> public (<a href="https://redirect.github.com/tokio-rs/tracing/issues/2680">#2680</a>)</li> <li><a href="https://github.com/tokio-rs/tracing/commit/f8c000202a30f8b9814b21a1e949ab35aeca5954"><code>f8c0002</code></a> attributes: fix clippy warning in attributes tests (<a href="https://redirect.github.com/tokio-rs/tracing/issues/2742">#2742</a>)</li> <li><a href="https://github.com/tokio-rs/tracing/commit/60b2dc34662648b91d69b2fa51d18d3677ddbce7"><code>60b2dc3</code></a> journald: fix clippy <code>unwrap_or_default</code> warning (<a href="https://redirect.github.com/tokio-rs/tracing/issues/2742">#2742</a>)</li> <li>Additional commits viewable in <a href="https://github.com/tokio-rs/tracing/compare/tracing-core-0.1.31...tracing-core-0.1.32">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores ) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> --------- Signed-off-by:
-
![dependabot[bot]'s avatar](https://secure.gravatar.com/avatar/bd5a8d6c673b738d52b0ac42a110045f3f964b3ebfc1d60ea805af743b1dc0e6?s=80&d=identicon "dependabot[bot]")
