This PR introduces the github flow which will create a release draft
automatically when the rc tag is pushed. The flow contains the following
steps:

- Gets the info about rust version used to build the node
- Builds the runtimes using `srtool`
- Extracts the info about each runtime 
- Aggregates the changelog from the prdocs
- Creates the release draft containing all the info related to the
release (changelog, runtimes, rust versions)
- Attaches the runtimes to the draft
- Posts the message to the RelEng internal channel to inform that the
build is done.

Related to the #3295

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Sometimes you need to debug some issues just by the logs and reconstruct
what happened.
In these scenarios it would be nice to know if a block was imported as
best block, and what it parent was.
So here I propose to change the output of the informant to this:

```
2024-04-05 20:38:22.004  INFO ⋮substrate: [Parachain] ✨ Imported #18 (0xe7b3…4555 -> 0xbd6f…ced7)    
2024-04-05 20:38:24.005  INFO ⋮substrate: [Parachain] ✨ Imported #19 (0xbd6f…ced7 -> 0x4dd0…d81f)    
2024-04-05 20:38:24.011  INFO ⋮substrate: [jobless-children-5352] 🌟 Imported #42 (0xed2e…27fc -> 0x718f…f30e)    
2024-04-05 20:38:26.005  INFO ⋮substrate: [Parachain] ✨ Imported #20 (0x4dd0…d81f -> 0x6e85…e2b8)    
2024-04-05 20:38:28.004  INFO ⋮substrate: [Parachain] 🌟 Imported #21 (0x6e85…e2b8 -> 0xad53…2a97)    
2024-04-05 20:38:30.004  INFO ⋮substrate: [Parachain] 🌟

 Imported #22 (0xad53…2a97 -> 0xa874…890f)    
```

---------

Co-authored-by: Bastian Köcher <[email protected]>

Improves `adder-collator` to also compute the parachain velocity. The
velocity is defined as number of parachain blocks progressing per relay
chain block.

In this test we're asserting that the elastic parachain always
progresses by 3 blocks per RCB, while the non-elastic parachain
progresses normally - 1 block per RCB.

---------

Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: ordian <[email protected]>

The stream was just used to communicate from the validator the peer
reports back to the gossip engine. Internally the gossip engine just
forwards these reports to the networking engine. So, we can just do this
directly.

The reporting stream was also pumped [in the worker behind the
engine](https://github.com/paritytech/polkadot-sdk/blob/9d626189/substrate/client/consensus/beefy/src/worker.rs#L939).
This means if there was a lot of data incoming over the engine, the
reporting stream was almost never processed and thus, it could have
started to grow and we have seen issues around this.

Partly Closes: https://github.com/paritytech/polkadot-sdk/issues/3945

With Coretime enabled we can no longer assume there is a static 1:1
mapping between core index and para id. This mapping should be obtained
from the scheduler/claimqueue on block by block basis.

This PR modifies `para_id()` (from `CoreState`) to return the scheduled
`ParaId` for occupied cores and removes its usages in the code.

Closes https://github.com/paritytech/polkadot-sdk/issues/3948

---------

Co-authored-by: Andrei Sandu <[email protected]>

Signed-off-by: hongkuang <[email protected]>

I don't think there are any more releases to the 0.2.x versions, so best
we're on the 0.3.x release.

No change on the benchmarks, fast local time is still just as fast as
before:

new version bench:
```
fast_local_time         time:   [30.551 ns 30.595 ns 30.668 ns]
```

old version bench:
```
fast_local_time         time:   [30.598 ns 30.646 ns 30.723 ns]
```

---------

Co-authored-by: Bastian Köcher <[email protected]>

1. Add `#[doc(no_inline)]` to frame umbrella crate re-exports that
eventually resolve to `frame_support_procedural` so docs don't look like
the screenshot below and instead link to the proper `frame-support`
docs.
<img width="1512" alt="Screenshot 2024-04-05 at 20 05 01"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/a41daa4c-ebca-44a4-9fea-f9f336314e13">


2. Remove `"Rust-Analyzer Users: "` prefix from
`frame_support_procedural` doc comments, since these doc comments are
visible in the web documentation and possible to stumble upon especially
when navigating from the frame umbrella crate.

Co-authored-by: Kian Paimani <[email protected]>

Decrements `total_deposit` when collection metadata is cleared in
`pallet-nfts` and `pallet-uniques`.

Defines a runtime api for `pallet-broker` for getting the current price
of a core if there is an ongoing sale.

Closes: #3413

---------

Co-authored-by: Bastian Köcher <[email protected]>

Bumps [h2](https://github.com/hyperium/h2) from 0.3.24 to 0.3.26.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/hyperium/h2/releases">h2's
releases</a>.</em></p>
<blockquote>
<h2>v0.3.26</h2>
<h2>What's Changed</h2>
<ul>
<li>Limit number of CONTINUATION frames for misbehaving
connections.</li>
</ul>
<p>See <a
href="https://seanmonstar.com/blog/hyper-http2-continuation-flood/">https://seanmonstar.com/blog/hyper-http2-continuation-flood/</a>
for more info.</p>
<h2>v0.3.25</h2>
<h2>What's Changed</h2>
<ul>
<li>perf: optimize header list size calculations by <a
href="https://github.com/Noah-Kennedy"><code>@​Noah-Kennedy</code></a>
in <a
href="https://redirect.github.com/hyperium/h2/pull/750">hyperium/h2#750</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/hyperium/h2/compare/v0.3.24...v0.3.25">https://github.com/hyperium/h2/compare/v0.3.24...v0.3.25</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/hyperium/h2/blob/v0.3.26/CHANGELOG.md">h2's
changelog</a>.</em></p>
<blockquote>
<h1>0.3.26 (April 3, 2024)</h1>
<ul>
<li>Limit number of CONTINUATION frames for misbehaving
connections.</li>
</ul>
<h1>0.3.25 (March 15, 2024)</h1>
<ul>
<li>Improve performance decoding many headers.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/hyperium/h2/commit/357127e279c06935830fe2140378312eac801494"><code>357127e</code></a>
v0.3.26</li>
<li><a
href="https://github.com/hyperium/h2/commit/1a357aaefc7243fdfa9442f45d90be17794a4004"><code>1a357aa</code></a>
fix: limit number of CONTINUATION frames allowed</li>
<li><a
href="https://github.com/hyperium/h2/commit/5b6c9e0da092728d702dff3607626aafb7809d77"><code>5b6c9e0</code></a>
refactor: cleanup new unused warnings (<a
href="https://redirect.github.com/hyperium/h2/issues/757">#757</a>)</li>
<li><a
href="https://github.com/hyperium/h2/commit/3a798327211345b9b2bf797e2e4f3aca4e0ddfee"><code>3a79832</code></a>
v0.3.25</li>
<li><a
href="https://github.com/hyperium/h2/commit/94e80b1c72bec282bb5d13596803e6fb341fec4c"><code>94e80b1</code></a>
perf: optimize header list size calculations (<a
href="https://redirect.github.com/hyperium/h2/issues/750">#750</a>)</li>
<li>See full diff in <a
href="https://github.com/hyperium/h2/compare/v0.3.24...v0.3.26">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=h2&package-manager=cargo&previous-version=0.3.24&new-version=0.3.26)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/paritytech/polkadot-sdk/network/alerts).

</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Signed-off-by: divdeploy <[email protected]>

Signed-off-by: Andrei Sandu <[email protected]>

This PR introduces a dedicated module for benchmarks within the
parachain runtime. By segregating benchmarks into their own module, we
achieve a cleaner project structure and improved readability,
facilitating easier maintenance and updates.

### Key Changes:
- **New Benchmarks Module**: A new file `benchmarks.rs` is added,
encapsulating the benchmarking code for various pallets.
- **Refactoring `lib.rs`**: The main runtime library file (`lib.rs`) has
been updated to reflect the extraction of benchmark definitions. By
moving these definitions to `benchmarks.rs`, we reduce clutter in
`lib.rs`, streamlining the runtime's core logic and configuration.

### Benefits of This Refactoring:
- **Focused Benchmarking**: Developers can now easily locate and modify
benchmarks without navigating through the core runtime logic, enabling
targeted performance improvements.
- **Cleaner Codebase**: Segregating benchmarks from the main runtime
logic helps maintain a clean, well-organized codebase, simplifying
navigation and maintenance.
- **Scalability**: As the parachain evolves, adding or updating
benchmarks becomes more straightforward, supporting scalability and
adaptability of the runtime.

### Summary of Changes:
- Created `benchmarks.rs` to house the benchmarking suite.
- Streamlined `lib.rs` by removing the inlined benchmark definitions and
linking to the new benchmarks module.

---------

Co-authored-by: Kian Paimani <[email protected]>

This PR adds a check that `max_timeslices > 0` and errors if not. It
also adds a test for this behaviour and cleans up some misleading docs.

Closes https://github.com/paritytech/polkadot-sdk/issues/3986

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

Properly account for #3302, cc #3984.

Reverts paritytech/polkadot-sdk#3816

On top of https://github.com/paritytech/polkadot-sdk/pull/3879

I've also moved the previous test where we ensure multiple cores per
para doesn't break non elastic parachains.

---------

Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Javier Viola <[email protected]>

## Verify

Coretime Westend:
```
polkadot-parachain --chain=coretime-westend --tmp --relay-chain-rpc-url wss://rpc.ibp.network/westend  --reserved-only --reserved-nodes /dns/boot-node.helikon.io/tcp/9420/p2p/12D3KooWFBPartM873MNm1AmVK3etUz34cAE9A9rwPztPno2epQ3
polkadot-parachain --chain=coretime-westend --tmp --relay-chain-rpc-url wss://rpc.ibp.network/westend  --reserved-only --reserved-nodes /dns/boot-node.helikon.io/tcp/9422/wss/p2p/12D3KooWFBPartM873MNm1AmVK3etUz34cAE9A9rwPztPno2epQ3
```

People Westend:

```
polkadot-parachain --chain=/path/to/people-westend.json --tmp --relay-chain-rpc-url wss://rpc.ibp.network/westend  --reserved-only --reserved-nodes /dns/boot-node.helikon.io/tcp/9520/p2p/12D3KooWHhZk21Wzvsd3Un1Cp63diXqr6idbG1MEiUWaitUZuX4c
polkadot-parachain --chain=/path/to/people-westend.json --tmp --relay-chain-rpc-url wss://rpc.ibp.network/westend  --reserved-only --reserved-nodes /dns/boot-node.helikon.io/tcp/9522/wss/p2p/12D3KooWHhZk21Wzvsd3Un1Cp63diXqr6idbG1MEiUWaitUZuX4c
```

Thanks.

The runtime now can provide a number of predefined presets of
`RuntimeGenesisConfig` struct. This presets are intended to be used in
different deployments, e.g.: `local`, `staging`, etc, and should be
included into the corresponding chain-specs.

Having `GenesisConfig` presets in runtime allows to fully decouple node
from runtime types (the problem is described in #1984).

**Summary of changes:**
- The `GenesisBuilder` API was adjusted to enable this functionality
(and provide better naming - #150):
   ```rust
    fn preset_names() -> Vec<PresetId>;
fn get_preset(id: Option<PresetId>) -> Option<serde_json::Value>;
//`None` means default
    fn build_state(value: serde_json::Value);
    pub struct PresetId(Vec<u8>);
   ```

- **Breaking change**: Old `create_default_config` method was removed,
`build_config` was renamed to `build_state`. As a consequence a node
won't be able to interact with genesis config for older runtimes. The
cleanup was made for sake of API simplicity. Also IMO maintaining
compatibility with old API is not so crucial.
- Reference implementation was provided for `substrate-test-runtime` and
`rococo` runtimes. For rococo new
[`genesis_configs_presets`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/polkadot/runtime/rococo/src/genesis_config_presets.rs#L530)
module was added and is used in `GenesisBuilder`
[_presets-related_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/polkadot/runtime/rococo/src/lib.rs#L2462-L2485)
methods.

- The `chain-spec-builder` util was also improved and allows to
([_doc_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/substrate/bin/utils/chain-spec-builder/src/lib.rs#L19)):
   - list presets provided by given runtime (`list-presets`),
- display preset or default config provided by the runtime
(`display-preset`),
   - build chain-spec using named preset (`create ... named-preset`),


- The `ChainSpecBuilder` is extended with
[`with_genesis_config_preset_name`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/substrate/client/chain-spec/src/chain_spec.rs#L447)
method which allows to build chain-spec using named preset provided by
the runtime. Sample usage on the node side
[here](https://github.com/paritytech/polkadot-sdk/blob/2caffaae

/polkadot/node/service/src/chain_spec.rs#L404).

Implementation of #1984.
fixes: #150
part of: #25

---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

This function is currently only exposed to runtime-benchmarks, where it
should be available in all tests.

Also made it available in `std` because this is how `set_block_number`
works in FRAME System, however, not sure if it is needed in the latest
std/no_std paradigm.

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

## Running  `./polkadot-parachain --chain coretime-kusama` works now:

**Parachain genesis state and header** match expected ones from
https://gist.github.com/bkontur/f74fc00fd726d09bc7f0f3a9f51ec113?permalink_comment_id=5009857#gistcomment-5009857
```
2024-04-03 12:03:58 [Parachain] 🔨 Initializing Genesis block/state (state: 0xc418…889c, header-hash: 0x638c…d050) 
...
2024-04-03 12:04:04 [Parachain] 💤 Idle (0 peers), best: #0 (0x638c…d050), finalized #0 (0x638c…d050)
```

**Relaychain genesis state and header** match expected ones:
https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Fkusama-rpc.polkadot.io#/explorer/query/0

```
2024-04-03 12:03:59 [Relaychain] 🔨 Initializing Genesis block/state (state: 0xb000…ef6b, header-hash: 0xb0a8…dafe)    
```





**Full logs:**
```
bparity@bkontur-ThinkPad-P14s-Gen-2i:~/parity/polkadot-sdk$ ./target/debug/polkadot-parachain --chain coretime-kusama
2024-04-03 12:03:52 Polkadot parachain    
2024-04-03 12:03:52 ✌️  version 4.0.0-665e3654    
2024-04-03 12:03:52 ❤️  by Parity Technologies <[email protected]>, 2017-2024    
2024-04-03 12:03:52 📋 Chain specification: Kusama Coretime    
2024-04-03 12:03:52 🏷  Node name: subsequent-quicksand-2382    
2024-04-03 12:03:52 👤 Role: FULL    
2024-04-03 12:03:52 💾 Database: RocksDb at /home/bparity/.local/share/polkadot-parachain/chains/coretime-kusama/db/full    
2024-04-03 12:03:54 Parachain id: Id(1005)    
2024-04-03 12:03:54 Parachain Account: 5Ec4AhPakEiNWFbAd26nRrREnaGQZo3uukPDC5xLr6314Dwg    
2024-04-03 12:03:54 Is collating: no    
2024-04-03 12:03:58 [Parachain] 🔨 Initializing Genesis block/state (state: 0xc418…889c, header-hash: 0x638c…d050)    
2024-04-03 12:03:59 [Relaychain] 🔨 Initializing Genesis block/state (state: 0xb000…ef6b, header-hash: 0xb0a8…dafe)    
2024-04-03 12:03:59 [Relaychain] 👴 Loading GRANDPA authority set from genesis on what appears to be first startup.    
2024-04-03 12:03:59 [Relaychain] 👶 Creating empty BABE epoch changes on what appears to be first startup.    
2024-04-03 12:03:59 [Relaychain] 🏷  Local node identity is: 12D3KooWSfXNBZYimwSKBqfKf7F1X6adNQQD5HVQbdnvSyBFn8Wd    
2024-04-03 12:03:59 [Relaychain] 💻 Operating system: linux    
2024-04-03 12:03:59 [Relaychain] 💻 CPU architecture: x86_64    
2024-04-03 12:03:59 [Relaychain] 💻 Target environment: gnu    
2024-04-03 12:03:59 [Relaychain] 💻 CPU: 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz    
2024-04-03 12:03:59 [Relaychain] 💻 CPU cores: 4    
2024-04-03 12:03:59 [Relaychain] 💻 Memory: 31797MB    
2024-04-03 12:03:59 [Relaychain] 💻 Kernel: 5.15.0-101-generic    
2024-04-03 12:03:59 [Relaychain] 💻 Linux distribution: Ubuntu 20.04.6 LTS    
2024-04-03 12:03:59 [Relaychain] 💻 Virtual machine: no    
2024-04-03 12:03:59 [Relaychain] 📦 Highest known block at #0    
2024-04-03 12:03:59 [Relaychain] 〽️ Prometheus exporter started at 127.0.0.1:9616    
2024-04-03 12:03:59 [Relaychain] Running JSON-RPC server: addr=127.0.0.1:9945, allowed origins=["http://localhost:*", "http://127.0.0.1:*", "https://localhost:*", "https://127.0.0.1:*", "https://polkadot.js.org"]    
2024-04-03 12:03:59 [Relaychain] 🏁 CPU score: 1.40 GiBs    
2024-04-03 12:03:59 [Relaychain] 🏁 Memory score: 15.42 GiBs    
2024-04-03 12:03:59 [Relaychain] 🏁 Disk score (seq. writes): 1.39 GiBs    
2024-04-03 12:03:59 [Relaychain] 🏁 Disk score (rand. writes): 690.56 MiBs    
2024-04-03 12:03:59 [Parachain] Using default protocol ID "sup" because none is configured in the chain specs    
2024-04-03 12:03:59 [Parachain] 🏷  Local node identity is: 12D3KooWAAvNqXn8WPmvnEj36j7HsdbtpRpmWDPT9xtp4CuphvxW    
2024-04-03 12:03:59 [Parachain] 💻 Operating system: linux    
2024-04-03 12:03:59 [Parachain] 💻 CPU architecture: x86_64    
2024-04-03 12:03:59 [Parachain] 💻 Target environment: gnu    
2024-04-03 12:03:59 [Parachain] 💻 CPU: 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz    
2024-04-03 12:03:59 [Parachain] 💻 CPU cores: 4    
2024-04-03 12:03:59 [Parachain] 💻 Memory: 31797MB    
2024-04-03 12:03:59 [Parachain] 💻 Kernel: 5.15.0-101-generic    
2024-04-03 12:03:59 [Parachain] 💻 Linux distribution: Ubuntu 20.04.6 LTS    
2024-04-03 12:03:59 [Parachain] 💻 Virtual machine: no    
2024-04-03 12:03:59 [Parachain] 📦 Highest known block at #0    
2024-04-03 12:03:59 [Parachain] 〽️ Prometheus exporter started at 127.0.0.1:9615    
2024-04-03 12:03:59 [Parachain] Running JSON-RPC server: addr=127.0.0.1:9944, allowed origins=["http://localhost:*", "http://127.0.0.1:*", "https://localhost:*", "https://127.0.0.1:*", "https://polkadot.js.org"]    
2024-04-03 12:03:59 [Parachain] 🏁 CPU score: 1.40 GiBs    
2024-04-03 12:03:59 [Parachain] 🏁 Memory score: 15.42 GiBs    
2024-04-03 12:03:59 [Parachain] 🏁 Disk score (seq. writes): 1.39 GiBs    
2024-04-03 12:03:59 [Parachain] 🏁 Disk score (rand. writes): 690.56 MiBs    
2024-04-03 12:03:59 [Parachain] discovered: 12D3KooWSfXNBZYimwSKBqfKf7F1X6adNQQD5HVQbdnvSyBFn8Wd /ip4/192.168.1.100/tcp/30334/ws    
2024-04-03 12:03:59 [Relaychain] discovered: 12D3KooWAAvNqXn8WPmvnEj36j7HsdbtpRpmWDPT9xtp4CuphvxW /ip4/192.168.1.100/tcp/30333/ws    
2024-04-03 12:03:59 [Relaychain] discovered: 12D3KooWAAvNqXn8WPmvnEj36j7HsdbtpRpmWDPT9xtp4CuphvxW /ip4/172.18.0.1/tcp/30333/ws    
2024-04-03 12:03:59 [Parachain] discovered: 12D3KooWSfXNBZYimwSKBqfKf7F1X6adNQQD5HVQbdnvSyBFn8Wd /ip4/172.17.0.1/tcp/30334/ws    
2024-04-03 12:03:59 [Relaychain] discovered: 12D3KooWAAvNqXn8WPmvnEj36j7HsdbtpRpmWDPT9xtp4CuphvxW /ip4/172.17.0.1/tcp/30333/ws    
2024-04-03 12:03:59 [Parachain] discovered: 12D3KooWSfXNBZYimwSKBqfKf7F1X6adNQQD5HVQbdnvSyBFn8Wd /ip4/172.18.0.1/tcp/30334/ws    
2024-04-03 12:04:00 [Relaychain] 🔍 Discovered new external address for our node: /ip4/178.41.176.246/tcp/30334/ws/p2p/12D3KooWSfXNBZYimwSKBqfKf7F1X6adNQQD5HVQbdnvSyBFn8Wd    
2024-04-03 12:04:00 [Relaychain] Sending fatal alert BadCertificate    
2024-04-03 12:04:00 [Relaychain] Sending fatal alert BadCertificate    
2024-04-03 12:04:04 [Relaychain] ⚙️  Syncing, target=#22575321 (7 peers), best: #738 (0x1803…bbef), finalized #512 (0xb9b6…7014), ⬇ 328.5kiB/s ⬆ 102.9kiB/s    
2024-04-03 12:04:04 [Parachain] 💤 Idle (0 peers), best: #0 (0x638c…d050), finalized #0 (0x638c…d050), ⬇ 0 ⬆ 0    
2024-04-03 12:04:09 [Relaychain] ⚙️  Syncing 169.5 bps, target=#22575322 (8 peers), best: #1586 (0x405b…a8aa), finalized #1536 (0x55d1…fb04), ⬇ 232.3kiB/s ⬆ 55.9kiB/s    
2024-04-03 12:04:09 [Parachain] 💤 Idle (0 peers), best: #0 (0x638c…d050), finalized #0 (0x638c…d050), ⬇ 0 ⬆ 0    
2024-04-03 12:04:14 [Relaychain] ⚙️  Syncing 168.0 bps, target=#22575323 (8 peers), best: #2426 (0x155f…d083), finalized #2048 (0xede6…f879), ⬇ 235.8kiB/s ⬆ 67.2kiB/s    
2024-04-03 12:04:14 [Parachain] 💤 Idle (0 peers), best: #0 (0x638c…d050), finalized #0 (0x638c…d050), ⬇ 0 ⬆ 0    
2024-04-03 12:04:19 [Relaychain] ⚙️  Syncing 170.0 bps, target=#22575324 (8 peers), best: #3276 (0x94d8…097e), finalized #3072 (0x0e4c…f587), ⬇ 129.0kiB/s ⬆ 34.0kiB/s
...
```

## Running  `./polkadot-parachain --chain people-kusama` works now:

**Parachain genesis state and header** match expected ones from
https://gist.github.com/bkontur/f74fc00fd726d09bc7f0f3a9f51ec113?permalink_comment_id=5011798#gistcomment-5011798
```
2024-04-04 10:26:24 [Parachain] 🔨 Initializing Genesis block/state (state: 0x023a…2733, header-hash: 0x07b8…2645)    
...
2024-04-04 10:26:30 [Parachain] 💤 Idle (0 peers), best: #0 (0x07b8…2645), finalized #0 (0x07b8…2645), ⬇ 0 ⬆ 0    
```

**Relaychain genesis state and header** match expected ones:
https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Fkusama-rpc.polkadot.io#/explorer/query/0

```
2024-04-04 10:26:25 [Relaychain] 🔨 Initializing Genesis block/state (state: 0xb000…ef6b, header-hash: 0xb0a8…dafe)  
```





**Full logs:**
```
bparity@bkontur-ThinkPad-P14s-Gen-2i:~/parity/aaa/polkadot-sdk$ ./target/debug/polkadot-parachain --chain people-kusama
2024-04-04 10:26:18 Polkadot parachain    
2024-04-04 10:26:18 ✌️  version 4.0.0-39274bb7    
2024-04-04 10:26:18 ❤️  by Parity Technologies <[email protected]>, 2017-2024    
2024-04-04 10:26:18 📋 Chain specification: Kusama People    
2024-04-04 10:26:18 🏷  Node name: knotty-flight-5398    
2024-04-04 10:26:18 👤 Role: FULL    
2024-04-04 10:26:18 💾 Database: RocksDb at /home/bparity/.local/share/polkadot-parachain/chains/people-kusama/db/full    
2024-04-04 10:26:21 Parachain id: Id(1004)    
2024-04-04 10:26:21 Parachain Account: 5Ec4AhPaYcfBz8fMoPd4EfnAgwbzRS7np3APZUnnFo12qEYk    
2024-04-04 10:26:21 Is collating: no    
2024-04-04 10:26:24 [Parachain] 🔨 Initializing Genesis block/state (state: 0x023a…2733, header-hash: 0x07b8…2645)    
2024-04-04 10:26:25 [Relaychain] 🔨 Initializing Genesis block/state (state: 0xb000…ef6b, header-hash: 0xb0a8…dafe)    
2024-04-04 10:26:25 [Relaychain] 👴 Loading GRANDPA authority set from genesis on what appears to be first startup.    
2024-04-04 10:26:25 [Relaychain] 👶 Creating empty BABE epoch changes on what appears to be first startup.    
2024-04-04 10:26:25 [Relaychain] 🏷  Local node identity is: 12D3KooWPoTVhnrFNzVYJPR42HE9rYjXhkKHFDL9ut5nafDqJHKB    
2024-04-04 10:26:25 [Relaychain] 💻 Operating system: linux    
2024-04-04 10:26:25 [Relaychain] 💻 CPU architecture: x86_64    
2024-04-04 10:26:25 [Relaychain] 💻 Target environment: gnu    
2024-04-04 10:26:25 [Relaychain] 💻 CPU: 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz    
2024-04-04 10:26:25 [Relaychain] 💻 CPU cores: 4    
2024-04-04 10:26:25 [Relaychain] 💻 Memory: 31797MB    
2024-04-04 10:26:25 [Relaychain] 💻 Kernel: 5.15.0-101-generic    
2024-04-04 10:26:25 [Relaychain] 💻 Linux distribution: Ubuntu 20.04.6 LTS    
2024-04-04 10:26:25 [Relaychain] 💻 Virtual machine: no    
2024-04-04 10:26:25 [Relaychain] 📦 Highest known block at #0    
2024-04-04 10:26:25 [Relaychain] 〽️ Prometheus exporter started at 127.0.0.1:9616    
2024-04-04 10:26:25 [Relaychain] Running JSON-RPC server: addr=127.0.0.1:9945, allowed origins=["http://localhost:*", "http://127.0.0.1:*", "https://localhost:*", "https://127.0.0.1:*", "https://polkadot.js.org"]    
2024-04-04 10:26:25 [Relaychain] 🏁 CPU score: 1.18 GiBs    
2024-04-04 10:26:25 [Relaychain] 🏁 Memory score: 15.61 GiBs    
2024-04-04 10:26:25 [Relaychain] 🏁 Disk score (seq. writes): 1.49 GiBs    
2024-04-04 10:26:25 [Relaychain] 🏁 Disk score (rand. writes): 650.01 MiBs    
2024-04-04 10:26:25 [Parachain] Using default protocol ID "sup" because none is configured in the chain specs    
2024-04-04 10:26:25 [Parachain] 🏷  Local node identity is: 12D3KooWS2WPQgtiZZYT6bLGjwGcJU7QVd5EeQvb4jHN3NVSWDdj    
2024-04-04 10:26:25 [Parachain] 💻 Operating system: linux    
2024-04-04 10:26:25 [Parachain] 💻 CPU architecture: x86_64    
2024-04-04 10:26:25 [Parachain] 💻 Target environment: gnu    
2024-04-04 10:26:25 [Parachain] 💻 CPU: 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz    
2024-04-04 10:26:25 [Parachain] 💻 CPU cores: 4    
2024-04-04 10:26:25 [Parachain] 💻 Memory: 31797MB    
2024-04-04 10:26:25 [Parachain] 💻 Kernel: 5.15.0-101-generic    
2024-04-04 10:26:25 [Parachain] 💻 Linux distribution: Ubuntu 20.04.6 LTS    
2024-04-04 10:26:25 [Parachain] 💻 Virtual machine: no    
2024-04-04 10:26:25 [Parachain] 📦 Highest known block at #0    
2024-04-04 10:26:25 [Parachain] 〽️ Prometheus exporter started at 127.0.0.1:9615    
2024-04-04 10:26:25 [Parachain] Running JSON-RPC server: addr=127.0.0.1:9944, allowed origins=["http://localhost:*", "http://127.0.0.1:*", "https://localhost:*", "https://127.0.0.1:*", "https://polkadot.js.org"]    
2024-04-04 10:26:25 [Parachain] 🏁 CPU score: 1.18 GiBs    
2024-04-04 10:26:25 [Parachain] 🏁 Memory score: 15.61 GiBs    
2024-04-04 10:26:25 [Parachain] 🏁 Disk score (seq. writes): 1.49 GiBs    
2024-04-04 10:26:25 [Parachain] 🏁 Disk score (rand. writes): 650.01 MiBs    
2024-04-04 10:26:25 [Parachain] discovered: 12D3KooWPoTVhnrFNzVYJPR42HE9rYjXhkKHFDL9ut5nafDqJHKB /ip4/172.17.0.1/tcp/30334/ws    
2024-04-04 10:26:25 [Relaychain] discovered: 12D3KooWS2WPQgtiZZYT6bLGjwGcJU7QVd5EeQvb4jHN3NVSWDdj /ip4/172.18.0.1/tcp/30333/ws    
2024-04-04 10:26:25 [Relaychain] discovered: 12D3KooWS2WPQgtiZZYT6bLGjwGcJU7QVd5EeQvb4jHN3NVSWDdj /ip4/192.168.1.100/tcp/30333/ws    
2024-04-04 10:26:25 [Parachain] discovered: 12D3KooWPoTVhnrFNzVYJPR42HE9rYjXhkKHFDL9ut5nafDqJHKB /ip4/172.18.0.1/tcp/30334/ws    
2024-04-04 10:26:25 [Relaychain] discovered: 12D3KooWS2WPQgtiZZYT6bLGjwGcJU7QVd5EeQvb4jHN3NVSWDdj /ip4/172.17.0.1/tcp/30333/ws    
2024-04-04 10:26:25 [Parachain] discovered: 12D3KooWPoTVhnrFNzVYJPR42HE9rYjXhkKHFDL9ut5nafDqJHKB /ip4/192.168.1.100/tcp/30334/ws    
2024-04-04 10:26:26 [Relaychain] 🔍 Discovered new external address for our node: /ip4/178.41.176.246/tcp/30334/ws/p2p/12D3KooWPoTVhnrFNzVYJPR42HE9rYjXhkKHFDL9ut5nafDqJHKB    
2024-04-04 10:26:27 [Relaychain] Sending fatal alert BadCertificate    
2024-04-04 10:26:27 [Relaychain] Sending fatal alert BadCertificate    
2024-04-04 10:26:30 [Relaychain] ⚙️  Syncing, target=#22588722 (8 peers), best: #638 (0xa9cd…7c30), finalized #512 (0xb9b6…7014), ⬇ 345.6kiB/s ⬆ 108.7kiB/s    
2024-04-04 10:26:30 [Parachain] 💤 Idle (0 peers), best: #0 (0x07b8…2645), finalized #0 (0x07b8…2645), ⬇ 0 ⬆ 0    
2024-04-04 10:26:35 [Relaychain] ⚙️  Syncing 174.4 bps, target=#22588722 (9 peers), best: #1510 (0xec0b…72f0), finalized #1024 (0x3f17…fd7f), ⬇ 203.1kiB/s ⬆ 45.0kiB/s    
2024-04-04 10:26:35 [Parachain] 💤 Idle (0 peers), best: #0 (0x07b8…2645), finalized #0 (0x07b8…2645), ⬇ 0 ⬆ 0    
2024-04-04 10:26:40 [Relaychain] ⚙️  Syncing 168.9 bps, target=#22588723 (9 peers), best: #2355 (0xa68b…3a64), finalized #2048 (0xede6…f879), ⬇ 201.6kiB/s ⬆ 47.4kiB/s    
2024-04-04 10:26:40 [Parachain] 💤 Idle (0 peers), best: #0 (0x07b8…2645), finalized #0 (0x07b8…2645), ⬇ 0 ⬆

 0    

```

## TODO
- [x] double check
`cumulus/polkadot-parachain/chain-specs/coretime-kusama.json`
(safeXcmVersion=3) see
[comment](https://github.com/paritytech/polkadot-sdk/pull/3961#discussion_r1549473587)
- [x] check if ~~`start_generic_aura_node`~~ or
`start_generic_aura_lookahead_node`
- [x] generate chain-spec for `people-kusama`

---------

Co-authored-by: Dónal Murray <[email protected]>

Part of https://github.com/paritytech/polkadot-sdk/issues/226 
Related https://github.com/paritytech/polkadot-sdk/issues/1833

- Deprecate `CurrencyAdapter` and introduce `FungibleAdapter`
- Deprecate `ToStakingPot` and replace usage with `ResolveTo`
- Required creating a new `StakingPotAccountId` struct that implements
`TypedGet` for the staking pot account ID
- Update parachain common utils `DealWithFees`, `ToAuthor` and
`AssetsToBlockAuthor` implementations to use `fungible`
- Update runtime XCM Weight Traders to use `ResolveTo` instead of
`ToStakingPot`
- Update runtime Transaction Payment pallets to use `FungibleAdapter`
instead of `CurrencyAdapter`
- [x] Blocked by https://github.com/paritytech/polkadot-sdk/pull/1296,
needs the `Unbalanced::decrease_balance` fix

The XCM builder pattern lets you build xcms like so:

```rust
let xcm = Xcm::builder()
    .withdraw_asset((Parent, 100u128).into())
    .buy_execution((Parent, 1u128).into())
    .deposit_asset(All.into(), AccountId32 { id: [0u8; 32], network: None }.into())
    .build();
```

All the `.into()` become quite annoying to have to write.
I accepted `impl Into<T>` instead of `T` in the generated methods from
the macro.
Now the previous example can be simplified as follows:

```rust
let xcm = Xcm::builder()
    .withdraw_asset((Parent, 100u128))
    .buy_execution((Parent, 1u128))
    .deposit_asset(All, [0u8; 32])
    .build();
```

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <[email protected]>

## Basic example showcasing a migration using the MBM framework

This PR has been built on top of
https://github.com/paritytech/polkadot-sdk/pull/1781 and adds two new
example crates to the `examples` pallet

### Changes Made:

Added the `pallet-example-mbm` crate: This crate provides a minimal
example of a pallet that uses MBM. It showcases a storage migration
where values are migrated from a `u32` to a `u64`.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Closes https://github.com/paritytech/polkadot-sdk/issues/2977

The issue appears to stem from the `aquamarine` crate failing to render
diagrams in re-exported crates.

e.g. as raised
[here](https://github.com/paritytech/polkadot-sdk/issues/2977), diagrams
would render at `frame_support::traits::Hooks` but not the re-exported
doc `frame::traits::Hooks`, even if I added `aquamarine` as a `frame`
crate dependency.

To resolve this, I followed advice in
https://github.com/mersinvald/aquamarine/issues/20 to instead render
mermaid diagrams directly using JS by adding an `after-content.js`.

---

Also fixes compile warnings, enables `--all-features` and disallows
future warnings in CI.

---------

Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

CI will be enforcing this with next parity-publish release

Use of `- >` instead of `- |` workarounds GitLab quirk when it crops
collapsed multiline `script:` section commands in its CI job logs.
This PR also fixes `- |` based `script:` steps to behave properly after
`- >` conversion.

Resolves https://github.com/paritytech/ci_cd/issues/972.

Step in https://github.com/paritytech/polkadot-sdk/issues/3155

Needed for https://github.com/paritytech/eng-automation/issues/6

This PR renames `frame` crate to `polkadot-sdk-frame` as `frame` is not
available on crates.io

---------

Co-authored-by: Kian Paimani <[email protected]>

Remove `fetch_next_scheduled_on_core` in favor of new wrapper and
methods for accessing it.

---------

Signed-off-by: Andrei Sandu <[email protected]>

Enables pov-reclaim on the rococo/westend parachains, part of
https://github.com/paritytech/polkadot-sdk/issues/3622

This PR ensure that the distance between any leaf and the finalized
block is within a reasonable distance.

For a new subscription, the chainHead has to provide all blocks between
the leaves of the chain and the finalized block.
 When the distance between a leaf and the finalized block is large:
 - The tree route is costly to compute
 - We could deliver an unbounded number of blocks (potentially millions)
(For more details see
https://github.com/paritytech/polkadot-sdk/pull/3445#discussion_r1507210283)

The configuration of the ChainHead is extended with:
- suspend on lagging distance: When the distance between any leaf and
the finalized block is greater than this number, the subscriptions are
suspended for a given duration.
- All active subscriptions are terminated with the `Stop` event, all
blocks are unpinned and data discarded.
- For incoming subscriptions, until the suspended period expires the
subscriptions will immediately receive the `Stop` event.
    - Defaults to 128 blocks
- suspended duration: The amount of time for which subscriptions are
suspended
    - Defaults to 30 seconds
 
 
 cc @paritytech/subxt-team

---------

Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>

Added tests for XCM barriers: `AllowSubscriptions`, `WithUniqueTopic` and `TrailingSetTopicAsId` (#3955)

Closes: https://github.com/paritytech/polkadot-sdk/issues/1756

Closes: https://github.com/paritytech/polkadot-sdk/issues/3909

fixes https://github.com/paritytech/polkadot-sdk/issues/3775

Additionally moves the claim queue fetch utilities into
`subsystem-util`.

TODO:
- [x] fix tests
- [x] add elastic scaling tests

---------

Signed-off-by: Andrei Sandu <[email protected]>

Fixes
https://github.com/paritytech/polkadot-sdk/issues/3884#issuecomment-2026058687

After moving regression tests to benchmarks
(https://github.com/paritytech/polkadot-sdk/pull/3741) we don't need to
filter tests anymore.

---------

Signed-off-by: Alexandru Vasile <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: Alin Dima <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Niklas Adolfsson <[email protected]>
Co-authored-by: Dastan <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Clara van Staden <[email protected]>
Co-authored-by: Ron <[email protected]>
Co-authored-by: Vincent Geddes <[email protected]>
Co-authored-by: Svyatoslav Nikolsky <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Adds implementation for `SortedMembers::add` for _pallet-membership_
benchmarks.

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>

Added `TryFrom<&'a RuntimeString> for &'a str`