- Nov 01, 2023
-
-
Branislav Kontur authored
## Summary Asset bridging support for AssetHub**Rococo** <-> AssetHub**Wococo** was added [here](https://github.com/paritytech/polkadot-sdk/pull/1215), so now we aim to bridge AssetHub**Rococo** and AssetHub**Westend**. (And perhaps retire AssetHubWococo and the Wococo chains). ## Solution **bridge-hub-westend-runtime** - added new runtime as a copy of `bridge-hub-rococo-runtime` - added support for bridging to `BridgeHubRococo` - added tests and benchmarks **bridge-hub-rococo-runtime** - added support for bridging to `BridgeHubWestend` - added tests and benchmarks - internal refactoring by splitting bridge configuration per network, e.g., `bridge_to_whatevernetwork_config.rs`. **asset-hub-rococo-runtime** - added support for asset bridging to `AssetHubWestend` (allows to receive only WNDs) - added new xcm router for `Westend` - added tests and benchmarks **asset-hub-westend-runtime** - added support for asset bridging to `AssetHubRococo` (allows to receive only ROCs) - added new xcm router for `Rococo` - added tests and benchmarks ## Deployment All changes will be deployed as a part of https://github.com/paritytech/polkadot-sdk/issues/1988. ## TODO - [x] benchmarks for all pallet instances - [x] integration tests - [x] local run scripts Relates to: https://github.com/paritytech/parity-bridges-common/issues/2602 Relates to: https://github.com/paritytech/polkadot-sdk/issues/1988 --------- Co-authored-by: command-bot <> Co-authored-by:
Adrian Catangiu <[email protected]> Co-authored-by:
joe petrowski <[email protected]>
-
Oliver Tale-Yazdi authored
Changes: - Change the fungible(s) logic to treat a self-transfer as No-OP (as long as all pre-checks pass). Note that the self-transfer case will not emit an event since no state was changed. --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]>
-
Serban Iorga authored
-
- Oct 31, 2023
-
-
Lulu authored
Co-authored-by:
Sergejs Kostjucenko <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]>
-
Adrian Catangiu authored
Removed confusing and outdated `TODO`.
-
- Oct 30, 2023
-
-
Bastian Köcher authored
This ensures that upgrading a parachain code sends the same event & digest as when using `set_code` on a standalone chain. Close: https://github.com/paritytech/polkadot-sdk/issues/2049
-
- Oct 27, 2023
-
-
Liam Aharon authored
Closes https://github.com/paritytech/release-engineering/issues/6 Adds a new Github Workflow which on a new release being created, builds and attaches all runtimes managed in this repository in two flavours: - `dev-debug-build`: Built with the `try-runtime` feature and has logging enabled - `on-chain-release`: Built with the regular old `on-chain-release` feature The new Github Workflow could be extended in the future by the @paritytech/release-engineering team to fully automate the release process if they choose to, similar to how it is fully automated in the Fellowship repo (https://github.com/polkadot-fellows/runtimes/blob/main/.github/workflows/release.yml). The `on-chain-release` did not exist for parachains, so I added it. --- Tested on my fork: - https://github.com/liamaharon/polkadot-sdk/actions/runs/6663773523 - https://github.com/liamaharon/polkadot-sdk/releases/tag/test-6 --------- Co-authored-by:
Chevdor <[email protected]> Co-authored-by:
Dónal Murray <[email protected]>
-
Bastian Köcher authored
When warp syncing a node we import a header of the parachain around the tip of the chain. This header is currently not imported as finalized block (should be fixed at some point as well), the parent headers are not yet present (still being synced) and thus, we run into a panic. Even if there is a case where a leaf could not be found in the database, this probably means that the db is broken and it will fail somewhere elese.
-
- Oct 26, 2023
-
-
Alin Dima authored
the min slot duration should be 0 only if the `experimental` feature is enabled. otherwise, the runtime will panic on a division by 0.
-
Branislav Kontur authored
Co-authored-by:
Adrian Catangiu <[email protected]>
-
Dastan authored
# Description - What does this PR do? While working with `pallet_nfts` through `nonfungibles_v2` traits `Inspect, Mutate`, I found out that once you have set the collection attribute with `<Nfts as Mutate>::set_collection_attribute()`, it's not possible to read it with `<Nfts as Inspect>::collection_attribute()` since they use different `namespace` values. When setting the attribute, `AttributeNamespace::Pallet` is used, while `AttributeNamespace::CollectionOwner` is used when reading. more context: https://github.com/freeverseio/laos/issues/7#issuecomment-1766137370 This PR makes `item` an optional parameter in `Inspect::system_attribute()`, to be able to read collection attributes. - Why are these changes needed? To be able to read collection level attributes when reading attributes of the collection. It will be possible to read collection attributes by passing `None` for `item` - How were these changes implemented and what do they affect? `NftsApi` is also affected and `NftsApi::system_attribute()` now accepts optional `item` parameter. ## Breaking change Because of the change in the `NftsApi::system_attribute()` method's `item` param, parachains who integrated the `NftsApi` need to update their API code and frontend integrations accordingly. AssetHubs are unaffected since the NftsApi wasn't released on those parachains yet.
-
- Oct 25, 2023
-
-
Branislav Kontur authored
[testnet] Align testnet system parachain runtimes using `RelayTreasuryLocation` and `SystemParachains` in the same way (#2023) This PR addresses several issues: - simplify referencing `RelayTreasuryLocation` without needing additional `RelayTreasury` struct - fix for referencing `SystemParachains` from parachain with `parents: 1` instead of `parents: 0` - removed hard-coded constants and fix tests for `asset-hub-rococo` which was merged to master after https://github.com/paritytech/polkadot-sdk/pull/1726 --------- Co-authored-by: command-bot <>
-
- Oct 24, 2023
-
-
Oliver Tale-Yazdi authored
Adds a config file that allows to run `zepter` without any arguments in the workspace to address all issues. A secondary workflow for the CI is provided as `zepter run check`. Both the formatting and linting are now in one check for efficiancy. The latest version also detects some more things that `featalign` was already showing. Error message [in the CI](https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/3916205) now looks like this: ```pre ... crate 'test-parachains' (/Users/vados/Documents/work/polkadot-sdk/polkadot/parachain/test-parachains/Cargo.toml) feature 'std' must propagate to: parity-scale-codec Found 55 issues (run with --fix to fix). Error: Command 'lint propagate-feature' failed with exit code 1 Polkadot-SDK uses the Zepter CLI to detect abnormalities in the feature configuration. It looks like one more more checks failed; please check the console output. You can try to automatically address them by running `zepter`. Otherwise please ask directly in the Merge Request, GitHub Discussions or on Matrix Chat, thank you. For more information, see: - https://github.com/paritytech/polkadot-sdk/issues/1831 - https://github.com/ggwpez/zepter ``` TODO: - [x] Check that CI fails correctly --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]>
-
Kian Paimani authored
closes https://github.com/paritytech/polkadot-sdk/issues/1882 ## Breaking Changes This PR introduces a new item to `pallet_balances::Config`: ```diff trait Config { ++ type RuntimeFreezeReasons; } ``` This value is only used to check it against `type MaxFreeze`. A similar check has been added for `MaxHolds` against `RuntimeHoldReasons`, which is already given to `pallet_balances`. In all contexts, you should pass the real `RuntimeFreezeReasons` generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing `()` would also work, but it would imply that the runtime uses no freezes at all. --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Oliver Tale-Yazdi <[email protected]>
-
- Oct 23, 2023
-
-
ordian authored
Fixes #768.
-
Branislav Kontur authored
This PR does not introduce any functional changes to the existing code, it merely addresses several minor refactors: - Moving bridging pallets to separate files. - Improving the readability and naming of weight files for bridging pallets and bridging pallet instances. The reason for this refactor is to facilitate easier plugin integration for the upcoming bridge between Rococo and Westend. --------- Co-authored-by: command-bot <>
-
Branislav Kontur authored
## Problem This PR addresses the issue with testnet AssetHub builds, which was discovered during the execution of `bot bench`. https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038738 ``` Compiling asset-hub-rococo-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-rococo-runtime) warning: Linking globals named 'Core_version': symbol multiply defined! error: failed to load bitcode of module "rococo_runtime-8799ee884447805a.rococo_runtime.0bc572b8-cgu.0.rcgu.o": warning: `asset-hub-rococo-runtime-wasm` (lib) generated 1 warning error: could not compile `asset-hub-rococo-runtime-wasm` (lib) due to previous error; 1 warning emitted ``` https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038739 ``` Compiling asset-hub-westend-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-westend-runtime) warning: Linking globals named 'Core_version': symbol multiply defined! error: failed to load bitcode of module "westend_runtime-86d7844430f97d5c.westend_runtime.b7678d03-cgu.0.rcgu.o": warning: `asset-hub-westend-runtime-wasm` (lib) generated 1 warning error: could not compile `asset-hub-westend-runtime-wasm` (lib) due to previous error; 1 warning emitted ``` ## Solution - Removed dependencies on `rococo-runtime` and `westend-runtime` introduced by [this PR](https://github.com/paritytech/polkadot-sdk/pull/1234/files#diff-a86375df98e04ca3cce1ea35c40257a222e2d5087f5f528ff33307678b78dc2dR534-R550). - Replaced `<rococo_runtime::Treasury as PalletInfoAccess>::index()` with `rococo_runtime_constants::TREASURY_PALLET_ID`. - Added `check_treasury_pallet_id` to the relay runtimes to ensure that the constant is aligned with the pallet id. - Added "Rococo Treasury" to the waived locations (that will not be charged fees in the executor) for `BridgeHubRococo` (to be aligned with AssetHubs). ## References [Full element discussion here](https://matrix.to/#/!JUeaZUiYbdrvzvtwSL:parity.io/$2PnjYMsWRjR7M3oOfGuRI0XkjdoqJLtRcAPVcDLuLVg?via=parity.io&via=web3.foundation). --------- Co-authored-by: command-bot <>
-
- Oct 20, 2023
-
-
Branislav Kontur authored
This PR addresses several minor issues: - Fixes the symlink for `asset-hub-rococo.json` chainspec. - Corrects the `asset-hub-rococo-genesis` invulnerables setup. - Relocates common bash functions for bridge testing to a separate file `bridges_common.sh`.
-
Bastian Köcher authored
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to crates.io as someone as squatted `xcm`. The problem with this rename is that the `TypeInfo` includes the crate name which ultimately lands in the metadata. The metadata is consumed by downstream users like `polkadot-js` or people building on top of `polkadot-js`. These people are using the entire `path` to find the type in the type registry. Thus, their code would break as the type path would now be [`staging_xcm`, `VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request fixes this by renaming the path segment `staging_xcm` to `xcm`. This requires: https://github.com/paritytech/scale-info/pull/197 --------- Co-authored-by:
Francisco Aguirre <[email protected]>
-
Francisco Aguirre authored
Removed some debug logs
-
- Oct 19, 2023
-
-
Sebastian Kunert authored
Until now prometheus metrics were not exposed by the minimal relay chain node. Also slight cleanups.
-
Sebastian Kunert authored
When launching our [small network](https://github.com/paritytech/polkadot-sdk/blob/master/cumulus/zombienet/examples/small_network.toml) for testing the node was crashing here shortly after launch: https://github.com/paritytech/polkadot-sdk/blob/5cdd819ed295645958afd9d937d989978fd0c84e/polkadot/node/collation-generation/src/lib.rs#L140 After changes in #1788 for the asset hub collator we are waiting for blocks of the shell runtime to pass before we initialize aura. However, this means that we attempted to initialize the collation related relay chain subsystems twice, leading to the error. I modified Aura to let it optionally take an already initialized stream of collation requests.
-
- Oct 18, 2023
-
-
Keith Yeung authored
Combination of paritytech/polkadot#7005, its addon PR paritytech/polkadot#7585 and its companion paritytech/cumulus#2433. This PR introduces a new XcmFeesToAccount struct which implements the `FeeManager` trait, and assigns this struct as the `FeeManager` in the XCM config for all runtimes. The struct simply deposits all fees handled by the XCM executor to a specified account. In all runtimes, the specified account is configured as the treasury account. XCM __delivery__ fees are now being introduced (unless the root origin is sending a message to a system parachain on behalf of the originating chain). # Note for reviewers Most file changes are tests that had to be modified to account for the new fees. Main changes are in: - cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery fees exponential factor - polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the FeeManager implementation - All runtime xcm_config files <- To add the FeeManager to the XCM configuration # Important note After this change, instructions that create and send a new XCM (Query*, Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport, DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock) will require the corresponding origin account in the origin register to pay for transport delivery fees, and the onward message will fail to be sent if the origin account does not have the required amount. This delivery fee is on top of what we already collect as tx fees in pallet-xcm and XCM BuyExecution fees! Wallet UIs that want to expose the new delivery fee can do so using the formula: ``` delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee) ``` where the delivery fee factor can be obtained from the corresponding pallet based on which transport you are using (UMP, HRMP or bridges), the base fee is a constant, the encoded message length from the message itself and the per byte fee is the same as the configured per byte fee for txs (i.e. `TransactionByteFee`). --------- Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Giles Cope <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
Kian Paimani <[email protected]>
-
joe petrowski authored
Adds descriptions needed for publishing to crates.io.
-
Adrian Catangiu authored
cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add asset-bridging support to it (#1215) This commit adds Rococo Asset Hub dedicated runtime so we can test new features here, before merging them in Kusama Asset Hub. Also adds one such feature: asset transfer over bridge (Rococo AssetHub <> Wococo AssetHub) - clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime` - make it use Rococo primitives, names, assets, constants, etc - add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo AssetHub Fixes #1128 --------- Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]>
-
Ignacio Palacios authored
Remove `publish = false` to publish the crate
-
- Oct 17, 2023
-
-
Squirrel authored
Slightly less verbose use of fungible(s). --------- Co-authored-by:
Liam Aharon <[email protected]>
-
Branislav Kontur authored
## Summary This PR introduces several enhancements. The current implementation of `NetworkExportTable` lacks remote location filtering support beyond `NetworkId` lookup. To provide more control and granularity, it's essential to allow configuration for bridging to different consensus `NetworkId` while restricting access e.g. to particular remote parachains. Additionally, the `StartsWith` and `Equals` and `StartsWithExplicitGlobalConsensus` helper functions, which are in active use, are moved to the `xcm-builder` and `frame_support` modules for better code organization. Adds a new `LocationWithAssetFilters` filter to enable location-based and asset-related filtering. This filter is useful for configuring the `pallet_xcm` filter for [XcmTeleportFilter](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/pallet-xcm/src/lib.rs#L212) and [XcmReserveTransferFilter](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/pallet-xcm/src/lib.rs#L216 ) to restrict specific assets. Furthermore, the `BridgeMessage` fields are not accessible outside of `xcm-builder`, limiting the ability to create custom logic dependent on it. --------- Co-authored-by:
Francisco Aguirre <[email protected]>
-
- Oct 16, 2023
-
-
Ignacio Palacios authored
Make System Parachain trusted Teleporters of each other. Migration of https://github.com/paritytech/cumulus/pull/2842 --------- Co-authored-by: command-bot <> Co-authored-by:
joe petrowski <[email protected]>
-
Ignacio Palacios authored
Remove `publish = false` to publish the crate
-
shuoer86 authored
-
- Oct 12, 2023
-
-
Tsvetomir Dimitrov authored
Exposes disabled validators list via a runtime API. --------- Co-authored-by:
ordian <[email protected]> Co-authored-by:
ordian <[email protected]>
-
- Oct 11, 2023
-
-
Branislav Kontur authored
# Desription ## Summary This PR introduces several nits and tweaks to xcm emulator tests for system parachains. ## Explanation **Deduplicate `XcmPallet::send(` with root origin code** - Introduced `send_transact_to_parachain` which could be easily reuse for scenarios like _governance call from relay chain to parachain_. **Refactor `send_transact_sudo_from_relay_to_system_para_works`** - Test covered just one use-case which was moved to the `do_force_create_asset_from_relay_to_system_para`, so now we can extend this test with more _governance-like_ senarios. - Renamed to `send_transact_as_superuser_from_relay_to_system_para_works`. **Remove `send_transact_native_from_relay_to_system_para_fails` test** - This test and/or description is kind of misleading, because system paras support Native from relay chain by `RelayChainAsNative` with correct xcm origin. - It tested only sending on relay chain which should go directly to the relay chain unit-tests (does not even need to be in xcm emulator level). ## Future directions Check restructure parachains integration tests [issue](https://github.com/paritytech/polkadot-sdk/issues/1389) and [PR with more TODOs](https://github.com/paritytech/polkadot-sdk/pull/1693 ). --------- Co-authored-by:
Ignacio Palacios <[email protected]>
-
- Oct 10, 2023
-
-
Keith Yeung authored
Co-authored-by:
Francisco Aguirre <[email protected]>
-
Branislav Kontur authored
[xcm] Use `Weight::MAX` for `reserve_asset_deposited`, `receive_teleported_asset` benchmarks (#1726) # Description ## Summary Previously, the `pallet_xcm::do_reserve_transfer_assets` and `pallet_xcm::do_teleport_assets` functions relied on weight estimation for remote chain execution, which was based on guesswork derived from the local chain. This approach led to complications for runtimes that did not provide or support specific [XCM configurations](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/polkadot/xcm/xcm-executor/src/config.rs#L43-L47) for `IsReserve` or `IsTeleporter`. Consequently, such runtimes had to resort to implementing hard-coded weights for XCM instructions like `reserve_asset_deposited` or `receive_teleported_asset` to support extrinsics such as `pallet_xcm::reserve_transfer_assets` and `pallet_xcm::teleport_assets`, which depended on remote weight estimation. The issue of remote weight estimation was addressed and resolved by [Pull Request #1645](https://github.com/paritytech/polkadot-sdk/pull/1645), which removed the need for remote weight estimation. ## Solution As a continuation of this improvement, the current PR proposes further cleanup by removing unnecessary hard-coded values and rectifying benchmark results with `Weight::MAX` that previously used `T::BlockWeights::get().max_block` as an override for unsupported XCM instructions like `ReserveAssetDeposited` and `ReceiveTeleportedAsset`. ## Questions - [x] Can we remove now also `Hardcoded till the XCM pallet is fixed` for `deposit_asset`? E.g. for AssetHubKusama [here](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/cumulus/parachains/runtimes/assets/asset-hub-kusama/src/weights/xcm/mod.rs#L129-L134) - [x] Are comments like [this](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/polkadot/runtime/kusama/src/weights/xcm/mod.rs#L94) `// Kusama doesn't support ReserveAssetDeposited, so this benchmark has a default weight` still relevant? Shouldnt be removed/changed? ## TODO - [x] `bench bot` regenerate xcm weights for all runtimes - [x] remove hard-coded stuff from system parachain weight files - [ ] when merged, open `polkadot-fellow/runtimes` PR ## References Fixes #1132 Closes #1132 Old polkadot repo [PR](https://github.com/paritytech/polkadot/pull/7546) --------- Co-authored-by: command-bot <>
-
- Oct 09, 2023
-
-
georgepisaltu authored
-
Ignacio Palacios authored
Closes: #1381 Originally from: https://github.com/paritytech/cumulus/pull/3037 --------- Co-authored-by:
joe petrowski <[email protected]>
-
- Oct 07, 2023
-
-
Muharem Ismailov authored
### Summary This PR introduces new dispatchables to the treasury pallet, allowing spends of various asset types. The enhanced features of the treasury pallet, in conjunction with the asset-rate pallet, are set up and enabled for Westend and Rococo. ### Westend and Rococo runtimes. Polkadot/Kusams/Rococo Treasury can accept proposals for `spends` of various asset kinds by specifying the asset's location and ID. #### Treasury Instance New Dispatchables: - `spend(AssetKind, AssetBalance, Beneficiary, Option<ValidFrom>)` - propose and approve a spend; - `payout(SpendIndex)` - payout an approved spend or retry a failed payout - `check_payment(SpendIndex)` - check the status of a payout; - `void_spend(SpendIndex)` - void previously approved spend; > existing spend dispatchable renamed to spend_local in this context, the `AssetKind` parameter contains the asset's location and it's corresponding `asset_id`, for example: `USDT` on `AssetHub`, ``` rust location = MultiLocation(0, X1(Parachain(1000))) asset_id = MultiLocation(0, X2(PalletInstance(50), GeneralIndex(1984))) ``` the `Beneficiary` parameter is a `MultiLocation` in the context of the asset's location, for example ``` rust // the Fellowship salary pallet's location / account FellowshipSalaryPallet = MultiLocation(1, X2(Parachain(1001), PalletInstance(64))) // or custom `AccountId` Alice = MultiLocation(0, AccountId32(network: None, id: [1,...])) ``` the `AssetBalance` represents the amount of the `AssetKind` to be transferred to the `Beneficiary`. For permission checks, the asset amount is converted to the native amount and compared against the maximum spendable amount determined by the commanding spend origin. the `spend` dispatchable allows for batching spends with different `ValidFrom` arguments, enabling milestone-based spending. If the expectations tied to an approved spend are not met, it is possible to void the spend later using the `void_spend` dispatchable. Asset Rate Pallet provides the conversion rate from the `AssetKind` to the native balance. #### Asset Rate Instance Dispatchables: - `create(AssetKind, Rate)` - initialize a conversion rate to the native balance for the given asset - `update(AssetKind, Rate)` - update the conversion rate to the native balance for the given asset - `remove(AssetKind)` - remove an existing conversion rate to the native balance for the given asset the pallet's dispatchables can be executed by the Root or Treasurer origins. ### Treasury Pallet Treasury Pallet can accept proposals for `spends` of various asset kinds and pay them out through the implementation of the `Pay` trait. New Dispatchables: - `spend(Config::AssetKind, AssetBalance, Config::Beneficiary, Option<ValidFrom>)` - propose and approve a spend; - `payout(SpendIndex)` - payout an approved spend or retry a failed payout; - `check_payment(SpendIndex)` - check the status of a payout; - `void_spend(SpendIndex)` - void previously approved spend; > existing spend dispatchable renamed to spend_local The parameters' types of the `spend` dispatchable exposed via the pallet's `Config` and allows to propose and accept a spend of a certain amount. An approved spend can be claimed via the `payout` within the `Config::SpendPeriod`. Clients provide an implementation of the `Pay` trait which can pay an asset of the `AssetKind` to the `Beneficiary` in `AssetBalance` units. The implementation of the Pay trait might not have an immediate final payment status, for example if implemented over `XCM` and the actual transfer happens on a remote chain. The `check_status` dispatchable can be executed to update the spend's payment state and retry the `payout` if the payment has failed. --------- Co-authored-by:
joe petrowski <[email protected]> Co-authored-by: command-bot <>
-
- Oct 06, 2023
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 1 update: [syn](https://github.com/dtolnay/syn). <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.38</h2> <ul> <li>Fix <em>"method 'peek' has an incompatible type for trait"</em> error when defining <code>bool</code> as a custom keyword (<a href="https://redirect.github.com/dtolnay/syn/issues/1518">#1518</a>, thanks <a href="https://github.com/Vanille-N"><code>@Vanille-N</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/43632bfb6c78ee1f952645a268ab1ac4af162977"><code>43632bf</code></a> Release 2.0.38</li> <li><a href="https://github.com/dtolnay/syn/commit/abd2c214b44da64a5e420d72919308300eebc23d"><code>abd2c21</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1518">#1518</a> from Vanille-N/master</li> <li><a href="https://github.com/dtolnay/syn/commit/6701e6077e15013ef34b15e3ffdae2657e499d83"><code>6701e60</code></a> Absolute path to <code>bool</code> in <code>custom_punctuation.rs</code></li> <li><a href="https://github.com/dtolnay/syn/commit/7313d242398111423f046386aa0a75548f63d236"><code>7313d24</code></a> Resolve single_match_else pedantic clippy lint in code generator</li> <li><a href="https://github.com/dtolnay/syn/commit/67ab64f3c09e17b23493c7cda498e7edb8830f21"><code>67ab64f</code></a> Include unexpected token in the test failure message</li> <li><a href="https://github.com/dtolnay/syn/commit/137ae33486de3f2652487f8f64436ad1429df496"><code>137ae33</code></a> Check no remaining token after the first literal</li> <li><a href="https://github.com/dtolnay/syn/commit/258e9e8a11d188c1ee1ffb2b069819239999f9ac"><code>258e9e8</code></a> Ignore single_match_else pedantic clippy lint in test</li> <li><a href="https://github.com/dtolnay/syn/commit/92fd50ee8cb52968d9c66fbe6d67638c1f838e26"><code>92fd50e</code></a> Test docs.rs documentation build in CI</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.37...2.0.38">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=syn&package-manager=cargo&previous-version=2.0.37&new-version=2.0.38)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores ) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Oct 05, 2023
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 1 update: [clap](https://github.com/clap-rs/clap). <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.6</h2> <h2>[4.4.6] - 2023-09-28</h2> <h3>Internal</h3> <ul> <li>Upgrade <code>anstream</code></li> </ul> <h2>v4.4.5</h2> <h2>[4.4.5] - 2023-09-25</h2> <h3>Fixes</h3> <ul> <li><em>(parser)</em> When inferring subcommand <code>name</code> or <code>long_flag</code>, allow ambiguous-looking matches that unambiguously map back to the same command</li> <li><em>(parser)</em> When inferring subcommand <code>long_flag</code>, don't panic</li> <li><em>(assert)</em> Clarify what action is causing a positional that doesn't set values which is especially useful for derive users</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.6] - 2023-09-28</h2> <h3>Internal</h3> <ul> <li>Upgrade <code>anstream</code></li> </ul> <h2>[4.4.5] - 2023-09-25</h2> <h3>Fixes</h3> <ul> <li><em>(parser)</em> When inferring subcommand <code>name</code> or <code>long_flag</code>, allow ambiguous-looking matches that unambiguously map back to the same command</li> <li><em>(parser)</em> When inferring subcommand <code>long_flag</code>, don't panic</li> <li><em>(assert)</em> Clarify what action is causing a positional that doesn't set values which is especially useful for derive users</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/39f5e807af1c08acedbf7343ce9ec379a4308636"><code>39f5e80</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/a5cb6bb988bbacb02e8cf98b6156c860d0801e08"><code>a5cb6bb</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/418c0017a654e9859adfa9b051815f20e4583e31"><code>418c001</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5146">#5146</a> from epage/update</li> <li><a href="https://github.com/clap-rs/clap/commit/485b957c4b90aa010276f813dbd429e1071f8fd9"><code>485b957</code></a> chore: Upgrade anstream</li> <li><a href="https://github.com/clap-rs/clap/commit/a1af8d9ad8f81eb2d71203b50c370a78ce3ec9f3"><code>a1af8d9</code></a> chore: Update from '_rust/main'</li> <li><a href="https://github.com/clap-rs/clap/commit/ac51f0925003597dec21529538597dbd7872d1ac"><code>ac51f09</code></a> chore(ci): Normalize json5 syntax</li> <li><a href="https://github.com/clap-rs/clap/commit/86c29dea384c7392a2b682fa0150f52c0f4c7f00"><code>86c29de</code></a> chore(ci): Updaet Renovate schema</li> <li><a href="https://github.com/clap-rs/clap/commit/204552890d316ec9ae0b21f85298ba1d5d0786f8"><code>2045528</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/55d223001682bc668f5e4db91afd5e76c2a36597"><code>55d2230</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/492ee03b325ff98c7702295e024576b52b71358d"><code>492ee03</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5140">#5140</a> from epage/dyn</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.4...v4.4.6">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.4&new-version=4.4.6)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores ) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-