## Motivation

`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.

While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.

## Solution

This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.

Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.

All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.

#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).

Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055



---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>

We are introducing a new set of `XcmController` traits (final name yet
to be determined).
These traits are implemented by `pallet-xcm` and allows other pallets,
such as `pallet_contracts`, to rely on these traits instead of tight
coupling them to `pallet-xcm`.

Using only the existing Xcm traits would mean duplicating the logic from
`pallet-xcm` in these other pallets, which we aim to avoid. Our
objective is to ensure that when these APIs are called from
`pallet-contracts`, they produce the exact same outcomes as if called
directly from `pallet-xcm`.

The other benefits is that we can also expose return values to
`pallet-contracts` instead of just calling `pallet-xcm` dispatchable and
getting a `DispatchResult` back.

See traits integration in this PR
https://github.com/paritytech/polkadot-sdk/pull/1248

, where the traits
are used as follow to define and implement `pallet-contracts` Config.
```rs
// Contracts config:
pub trait Config: frame_system::Config {
  // ...

  /// A type that exposes XCM APIs, allowing contracts to interact with other parachains, and
  /// execute XCM programs.
  type Xcm: xcm_executor::traits::Controller<
	  OriginFor<Self>,
	  <Self as frame_system::Config>::RuntimeCall,
	  BlockNumberFor<Self>,
  >;
}

// implementation
impl pallet_contracts::Config for Runtime {
        // ...

	type Xcm = pallet_xcm::Pallet<Self>;
}
```

---------

Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: command-bot <>

This was discovered during a debugging session, and it only served to
mask the underlying error, which was not great.

(imported from https://github.com/paritytech/cumulus/pull/2157)

## Changes

This MR refactores the XCMP, Parachains System and DMP pallets to use
the [MessageQueue](https://github.com/paritytech/substrate/pull/12485)
for delayed execution of incoming messages. The DMP pallet is entirely
replaced by the MQ and thereby removed. This allows for PoV-bounded
execution and resolves a number of issues that stem from the current
work-around.

All System Parachains adopt this change.  
The most important changes are in `primitives/core/src/lib.rs`,
`parachains/common/src/process_xcm_message.rs`,
`pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs`
and the runtime configs.

### DMP Queue Pallet

The pallet got removed and its logic refactored into parachain-system.
Overweight message management can be done directly through the MQ
pallet.

Final undeployment migrations are provided by
`cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that
can be configured with an aux config trait like:

```rust
parameter_types! {
	pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME;
	pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent;
}

impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime {
	type PalletName = DmpQueuePalletName;
	type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>;
	type DbWeight = <Runtime as frame_system::Config>::DbWeight;
}

// And adding them to your Migrations tuple:
pub type Migrations = (
	...
	cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>,
	cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>,
);
```

### XCMP Queue pallet

Removed all dispatch queue functionality. Incoming XCMP messages are now
either: Immediately handled if they are Signals, enqueued into the MQ
pallet otherwise.

New config items for the XCMP queue pallet:
```rust
/// The actual queue implementation that retains the messages for later processing.
type XcmpQueue: EnqueueMessage<ParaId>;

/// How a XCM over HRMP from a sibling parachain should be processed.
type XcmpProcessor: ProcessMessage<Origin = ParaId>;

/// The maximal number of suspended XCMP channels at the same time.
#[pallet::constant]
type MaxInboundSuspended: Get<u32>;
```

How to configure those:

```rust
// Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since
// the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s.
type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>;

// Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched
// with origin `Junction::Sibling(…)`.
type XcmpProcessor = ProcessFromSibling<
	ProcessXcmMessage<
		AggregateMessageOrigin,
		xcm_executor::XcmExecutor<xcm_config::XcmConfig>,
		RuntimeCall,
	>,
>;

// Not really important what to choose here. Just something larger than the maximal number of channels.
type MaxInboundSuspended = sp_core::ConstU32<1_000>;
```

The `InboundXcmpStatus` storage item was replaced by
`InboundXcmpSuspended` since it now only tracks inbound queue suspension
and no message indices anymore.

Now only sends the most recent channel `Signals`, as all prio ones are
out-dated anyway.

### Parachain System pallet

For `DMP` messages instead of forwarding them to the `DMP` pallet, it
now pushes them to the configured `DmpQueue`. The message processing
which was triggered in `set_validation_data` is now being done by the MQ
pallet `on_initialize`.

XCMP messages are still handed off to the `XcmpMessageHandler`
(XCMP-Queue pallet) - no change here.

New config items for the parachain system pallet:
```rust
/// Queues inbound downward messages for delayed processing. 
///
/// Analogous to the `XcmpQueue` of the XCMP queue pallet.
type DmpQueue: EnqueueMessage<AggregateMessageOrigin>;
``` 

How to configure:
```rust
/// Use the MQ pallet to store DMP messages for delayed processing.
type DmpQueue = MessageQueue;
``` 

## Message Flow

The flow of messages on the parachain side. Messages come in from the
left via the `Validation Data` and finally end up at the `Xcm Executor`
on the right.

![Untitled
(1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d)

## Further changes

- Bumped the default suspension, drop and resume thresholds in
`QueueConfigData::default()`.
- `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when
they would be a noop.
- Properly validate the `QueueConfigData` before setting it.
- Marked weight files as auto-generated so they wont auto-expand in the
MR files view.
- Move the `hypothetical` asserts to `frame_support` under the name
`experimental_hypothetically`

Questions:
- [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in
the runtimes? Not sure how to best fix. Just having them like this makes
tests fail that rely on the real message processor when the feature is
enabled.
- [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler
already takes 80% so I put it to 10% but that is quite low.

TODO:
- [x] Remove c&p code after
https://github.com/paritytech/polkadot/pull/6271
- [x] Use `HandleMessage` once it is public in Substrate
- [x] fix `runtime-benchmarks` feature
https://github.com/paritytech/polkadot/pull/6966


- [x] Benchmarks
- [x] Tests
- [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended`
- [x] Possibly cleanup Migrations (DMP+XCMP)
- [x] optional: create `TransformProcessMessageOrigin` in Substrate and
replace `ProcessFromSibling`
- [ ] Rerun weights on ref HW

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>

Changes:
- Change the fungible(s) logic to treat a self-transfer as No-OP (as
long as all pre-checks pass).

Note that the self-transfer case will not emit an event since no state
was changed.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

closes https://github.com/paritytech/polkadot-sdk/issues/1882



## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.

This requires: https://github.com/paritytech/scale-info/pull/197



---------

Co-authored-by: Francisco Aguirre <[email protected]>

Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.

This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.

The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.

XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).

# Note for reviewers

Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration

# Important note

After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!

Wallet UIs that want to expose the new delivery fee can do so using the
formula:

```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```

where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Giles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

Partially addresses #1638

Still need a better solution to allow devs to have better control of
this.

---------

Co-authored-by: Keith Yeung <[email protected]>
Co-authored-by: joe petrowski <[email protected]>

Slightly less verbose use of fungible(s).

---------

Co-authored-by: Liam Aharon <[email protected]>

## Summary

This PR introduces several enhancements.

The current implementation of `NetworkExportTable` lacks remote location
filtering support beyond `NetworkId` lookup. To provide more control and
granularity, it's essential to allow configuration for bridging to
different consensus `NetworkId` while restricting access e.g. to
particular remote parachains.

Additionally, the `StartsWith` and `Equals` and
`StartsWithExplicitGlobalConsensus` helper functions, which are in
active use, are moved to the `xcm-builder` and `frame_support` modules
for better code organization.

Adds a new `LocationWithAssetFilters` filter to enable location-based
and asset-related filtering. This filter is useful for configuring the
`pallet_xcm` filter for
[XcmTeleportFilter](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/pallet-xcm/src/lib.rs#L212)
and
[XcmReserveTransferFilter](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/pallet-xcm/src/lib.rs#L216

)
to restrict specific assets.

Furthermore, the `BridgeMessage` fields are not accessible outside of
`xcm-builder`, limiting the ability to create custom logic dependent on
it.

---------

Co-authored-by: Francisco Aguirre <[email protected]>

This pr resolves https://github.com/paritytech/polkadot-sdk/issues/1428.

*Added only to Kusama for now*

I did raise it
[here](https://github.com/polkadot-fellows/runtimes/pull/19

) and we
discussed creating a chopsticks test to run an end-to-end test

however, to do that I will need a build agent/custom runner that is
powerful enough to run the build

I will be doing that separately as I still think having chopsticks test
your runtime with each commit will be very powerful and extremely useful
for the ecosystem

For now I have used XCM simulator and replicated what the other reserve
tests do

---------

Co-authored-by: Gavin Wood <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Moving a few pallets to the latest and greatest `derive_impl` to give it
a try.

Part of #171

---------

Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Keith Yeung <[email protected]>

This PR filters calls from the Identity pallet from all Relay Chain
runtimes as preparation to move the identity state and logic to a system
parachain within each network.

After this change is deployed to a runtime, no more changes such as
adding new sub-identities will be possible. The frozen state will be
part of the genesis state of the system chain. After the system chain
launches, the pallet and all state will be removed from each Relay
Chain.

Applications and UIs that render display information from this pallet
will need to read from the system chain when it launches.

The goal is to allow Fellowship on Collective chain to have a sovereign
account on Polkadot so that we can add it as an identity registrar. This
will allow Fellows origin to be able to provide judgements for
Fellowship members.

This currently allow any body on any parachain including non system
parachains to have sovereign account. I cannot think of any reason why
that may be an issue but let me know if I should change it to filter
only system parachains.

[This](https://gist.github.com/xlc/ec61bfa4e9f6d62da27d30141ad2c72b) is
the testing script.

Original PR: https://github.com/paritytech/polkadot/pull/7518

xcm-builder: PayOverXcm supports fallible convertors for asset kind and beneficiary conversion  (#1572)

`PayOverXcm` type accepts two converters to transform the `AssetKind`
and `Beneficiary` parameter types into recognized `xcm` types. In this
PR, we've modified the bounds for these converters, transitioning from
`Convert` to `TryConvert`.

One such use case for this adjustment is when dealing with versioned xcm
types for `AssetKind` and `Beneficiary`. These types might be not
convertible to the latest xcm version, hence the need for fallible
conversion.

This changes required for
https://github.com/paritytech/polkadot-sdk/pull/1333

## Summary

Implementations of `SendXcm`'s `validate` should not consume `dest`
and/or `msg` parameters in case of `NotApplicable` error.
This commit aligns expected behavior for `UnpaidRemoteExporter` and
`SovereignPaidRemoteExporter`.

## Testing

Added `remote_exporters_does_not_consume_dest_or_msg_on_not_applicable`
test which checks two possible cases:
- `dest` is local
- no configured exporter for `dest`

Co-authored-by: Javier Viola <[email protected]>

* Rename `polkadot-parachain` to `polkadot-parachain-primitives`

While doing this it also fixes some last `rustdoc` issues and fixes
another Cargo warning related to `pallet-paged-list`.

* Fix compilation

* ".git/.scripts/commands/fmt/fmt.sh"

* Fix XCM docs

---------

Co-authored-by: command-bot <>

* Add environmental variable to track decoded instructions

* Fix doc tests

* Fix manifest formatting

* ".git/.scripts/commands/fmt/fmt.sh"

* Add one more test

* Add SetAppendix in test

---------

Co-authored-by: command-bot <>

* restructure dispatch macro related exports

* moved Dispatchable to lib.rs

* fix .gitignore final newline

* ".git/.scripts/commands/fmt/fmt.sh"

* fix rustdocs

* wip

---------

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: ordian <[email protected]>

* Put `GetWeight` where it belongs

* add GetWeight to v2

* Re-export unchanged trait

---------

Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: Keith Yeung <[email protected]>

* Rename squatted crates

This commit adds the staging- prefix to squatted crates so we can go forward and publish them to crates.io.

Using the staging- prefix is a temp fix until we decide on replacement names.
https://forum.parity.io/t/renaming-squated-crates-in-substrate-polkadot-cumulus/1964/6

* Fix test after crate renames

* Update Lockfile

* Add missing Cumulus licenses

* Typo

* Add missing Substrate licenses

* Single job checking the sub-repos in steps

* Remove dates

* Remove dates

* Add missing (C)

* Update FRAME UI tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update more UI tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Fix `test-rustdoc`

* ".git/.scripts/commands/fmt/fmt.sh"

---------

Co-authored-by: command-bot <>

* Fix build profiles

Closes https://github.com/paritytech/polkadot-sdk/issues/1155



Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Manually set version to 1.0.0

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use workspace repo

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* 'Authors and Edition from workspace

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Manually fix conflicting ?

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove duplicates

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Autofix feature propagation

zepter lint propagate-feature --feature try-runtime --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="try-runtime:frame-try-runtime"
zepter lint propagate-feature --feature runtime-benchmarks --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking"
zepter lint propagate-feature --feature std --left-side-feature-missing=ignore --workspace --fix
zepter f f

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump zepter

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add some duplicates

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Add some duplicates"

This reverts commit c6ce6272

.

* Remove default enabled features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump Zepter

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump in correct location 🤦



Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* DNM: Add some mistakes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* DNM: Add some mistakes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "DNM: Add some mistakes"

This reverts commit d469b3f0.

* Revert "DNM: Add some mistakes"

This reverts commit d892a73a

.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add CI for monorepo

* fix frame tests

* Format features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* add note for skipping tests and disable test-linux-stable-all

* Fix tests and compile issues (#1152)

* Fix feature dependant import

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump test timeout

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove feature gate

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add resolver 2

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove old lockfile

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Format features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix check-dependency-rules

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* rm test-runtime

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Actually fix script

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* enable cargo-check-each-crate-macos

* Run check-each-crate on 6 machines (#1163)

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Signed-off-by: alvicsam <[email protected]>

* Fix xcm-builder mock

(preparation for monorepo)

The CI fails here when the runtime-benchmarks feature is enabled in the workspace.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update xcm/xcm-builder/Cargo.toml

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bound number of assets which can be withdrawn to pay for execution.

* ".git/.scripts/commands/fmt/fmt.sh"

* Include ClaimAsset in limiting the assets

* Change max assets to constant

---------

Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>

* PayOverXcm: Add test skeleton

* PayOverXcm: Add tests checking PayOverXcm generates correct message

* Add PayOverXcm and salary pallet integration test

* Fix XCM execution issue

* Fix documentation issues

* Add missing period at the end of comment

* Fix mock problems

* Add missing licenses

* Fix lints

* Fix more lints

* Add docs to mock

* Add transfer assertions

* Remove magic numbers

---------

Co-authored-by: parity-processbot <>

* Fix clippy check

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Autofix clippy

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix trivial

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* suppress warnings

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Quiet clippy 😌



Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use same rustfmt.toml as Substrate

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* format format file

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Format with new config

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add Substrate Clippy config

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Print Clippy version in CI

Otherwise its difficult to reproduce locally.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Make fmt happy

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update node/core/pvf/src/error.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Update node/core/pvf/src/error.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Document non-uniqueness of SetTopic IDs

* More comments on WithUniqueTopic

* Add license to crates

This is required to publish to crates.io

* Add more licenses

[xcm] `GlobalConsensusConvertsFor` for remote relay chain (based on pevious GlobalConsensusParachainConvertsFor) (#7517)

* [xcm] `GlobalConsensusConvertsFor` for remote relay chain (based on previous GlobalConsensusParachainConvertsFor)

* Typo

* PR fix (constants in test)

* Re-export of `GlobalConsensusConvertsFor`

* assert to panic

* Update xcm/src/v3/multiasset.rs

Co-authored-by: joe petrowski <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: joe petrowski <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: joe petrowski <[email protected]>

* Review fixes

---------

Co-authored-by: parity-processbot <>
Co-authored-by: joe petrowski <[email protected]>

* added XcmContext to WeightTrader trait

* cargo fmt

* make xcm context optional

* make compile

* fix compile

* `XcmContext` to `buy_weight / refund_weight`

---------

Co-authored-by: Patricio Napoli <[email protected]>
Co-authored-by: Giles Cope <[email protected]>
Co-authored-by: parity-processbot <>

* Add polkadot XCM benchmarks

* Add temp

* ".git/.scripts/commands/bench/bench.sh" xcm polkadot pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm polkadot pallet_xcm_benchmarks::generic

* Add weights to XCM on Polkadot

* Make CI fail on old files

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update template

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add reserve_asset_deposited benchmark

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::generic

* Update weights

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Change initiate_reserve_deposit in runtime weights

* Update weights

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove trusted reserves from runtimes

* Fix pallet-xcm-benchmarks mock

* Fix test

* Change pallet xcm weigher in kusama

* Fix

* Remove merge conflict artifact

* Remove initiate_reserve_withdraw from generic benchmarks

* Add missing implementation to XCM benchmark

* Fix failing karura test

* Remove dbg!

Co-authored-by: Keith Yeung <[email protected]>

* Fix fmt

* Revert "Fix fmt"

This reverts commit 676f2d8db07d7427750c79f95494d4988d06fda5.

* Fix fmt

* Remove duplicated template code

* Add back part of the template

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm polkadot pallet_xcm_benchmarks::fungible

* Don't skip reserve asset deposited benchmark

* Remove call to non-generated benchmark yet

* Underscore unused parameter

* Skip not supported benchmarks and hardcode value

* Remove ReserveAssetDeposited benchmark

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm polkadot pallet_xcm_benchmarks::fungible

* Add back ReserveAssetDeposited

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm polkadot pallet_xcm_benchmarks::fungible

* Use default benchmark for ReserveAssetDeposited

* Add missing parameter

* Revert reserve asset deposited benchmark

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm kusama pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm westend pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::fungible

* Add 'real' benchmarks

* Add TrustedReserve to actual XcmConfig

* Add TrustedReserve to actual XcmConfig (fix)

* Whitelist from benchmarking XCM storage keys read each block (#6871)

* Whitelist from benchmarking XCM storage keys read each block

* ".git/.scripts/commands/bench/bench.sh" runtime polkadot pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime polkadot pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime westend pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime rococo pallet_xcm

* Remove XcmPallet SupportedVersion from the benchmark whitelist

* ".git/.scripts/commands/bench/bench.sh" runtime polkadot pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime kusama pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime westend pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime rococo pallet_xcm

* WIP

* Add necessary traits, remove unnecessary whitelisted keys

* Fix tests

* Remove unused file

* Remove unused import

---------

Co-authored-by: command-bot <>

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm westend pallet_xcm_benchmarks::fungible

* Fix spellchecker issues

* Remove unused migration code

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Keith Yeung <[email protected]>