- Apr 02, 2024
-
-
Bastian Köcher authored
When using `schedule_code_upgrade` to change the code of a parachain in the relay chain runtime, we had already fixed to not set the `GoAhead` signal. This was done to not brick any parachain after the upgrade, because they were seeing the signal without having any upgrade prepared. The remaining problem is that the parachain code is only upgraded after a parachain header was enacted, aka the parachain made some progress. However, this is quite complicated if the parachain is bricked (which is the most common scenario why to manually schedule a code upgrade). Thus, this pull request replaces `SetGoAhead` with `UpgradeStrategy` to signal to the logic kind of strategy want to use. The strategies are either `SetGoAheadSignal` or `ApplyAtExpectedBlock`. `SetGoAheadSignal` sets the go ahead signal as before and awaits a parachain block. `ApplyAtExpectedBlock` schedules the upgrade and applies it directly at the `expected_block` without waiting for the parachain to make any kind of progress.
-
- Mar 26, 2024
-
-
Dcompoze authored
**Update:** Pushed additional changes based on the review comments. **This pull request fixes various spelling mistakes in this repository.** Most of the changes are contained in the first **3** commits: - `Fix spelling mistakes in comments and docs` - `Fix spelling mistakes in test names` - `Fix spelling mistakes in error messages, panic messages, logs and tracing` Other source code spelling mistakes are separated into individual commits for easier reviewing: - `Fix the spelling of 'authority'` - `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'` - `Fix the spelling of 'prev_enqueud_messages'` - `Fix the spelling of 'endpoint'` - `Fix the spelling of 'children'` - `Fix the spelling of 'PenpalSiblingSovereignAccount'` - `Fix the spelling of 'PenpalSudoAccount'` - `Fix the spelling of 'insufficient'` - `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'` - `Fix the spelling of 'subtracted'` - `Fix the spelling of '...
-
- Mar 19, 2024
-
-
Davide Galassi authoredIntroduces `CryptoBytes` type defined as: ```rust pub struct CryptoBytes<const N: usize, Tag = ()>(pub [u8; N], PhantomData<fn() -> Tag>); ``` The type implements a bunch of methods and traits which are typically expected from a byte array newtype (NOTE: some of the methods and trait implementations IMO are a bit redundant, but I decided to maintain them all to not change too much stuff in this PR) It also introduces two (generic) typical consumers of `CryptoBytes`: `PublicBytes` and `SignatureBytes`. ```rust pub struct PublicTag; pub PublicBytes<const N: usize, CryptoTag> = CryptoBytes<N, (PublicTag, CryptoTag)>; pub struct SignatureTag; pub SignatureBytes<const N: usize, CryptoTag> = CryptoBytes<N, (SignatureTag, CryptoTag)>; ``` Both of them use a tag to differentiate the two types at a higher level. Downstream specializations will further specialize using a dedicated crypto tag. For example in ECDSA: ```rust pub struct EcdsaTag; pub type Public = PublicBytes<PUBLIC_KEY_SERIALIZED_SIZE, EcdsaTag>; pub type Signature = PublicBytes<PUBLIC_KEY_SERIALIZED_SIZE, EcdsaTag>; ``` Overall we have a cleaner and most importantly **consistent** code for all the types involved All these details are opaque to the end user which can use `Public` and `Signature` for the cryptos as before
-
- Mar 17, 2024
-
-
Oliver Tale-Yazdi authoredCrowdloan account should burn all funds after a crowd loan got dissolved to ensure that the account is reaped correctly. --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]>
-
- Mar 15, 2024
-
-
gupnik authored
Step in https://github.com/paritytech/polkadot-sdk/issues/171 This PR removes `as [disambiguation_path]` syntax from `derive_impl` usage across the polkadot-sdk as introduced in https://github.com/paritytech/polkadot-sdk/pull/3505
-
- Mar 13, 2024
-
-
georgepisaltu authored
Revert "FRAME: Create `TransactionExtension` as a replacement for `SignedExtension` (#2280)" (#3665) This PR reverts #2280 which introduced `TransactionExtension` to replace `SignedExtension`. As a result of the discussion [here](https://github.com/paritytech/polkadot-sdk/pull/3623#issuecomment-1986789700), the changes will be reverted for now with plans to reintroduce the concept in the future. --------- Signed-off-by:georgepisaltu <[email protected]>
-
- Mar 07, 2024
-
-
Pablo Andrés Dorado Suárez authored
Closes #376 --------- Co-authored-by: command-bot <>
-
- Mar 04, 2024
-
-
Gavin Wood authored
Closes #2160 First part of [Extrinsic Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415) Introduces a new trait `TransactionExtension` to replace `SignedExtension`. Introduce the idea of transactions which obey the runtime's extensions and have according Extension data (né Extra data) yet do not have hard-coded signatures. Deprecate the terminology of "Unsigned" when used for transactions/extrinsics owing to there now being "proper" unsigned transactions which obey the extension framework and "old-style" unsigned which do not. Instead we have __*General*__ for the former and __*Bare*__ for the latter. (Ultimately, the latter will be phased out as a type of transaction, and Bare will only be used for Inherents.) Types of extrinsic are now therefore: - Bare (no hardcoded signature, no Extra data; used to be known as "Unsigned") - Bare transactions (deprecated): Gossiped, validated with `ValidateUnsigned` (deprecated) and the `_bare_compat` bits of `TransactionExtension` (deprecated). - Inherents: Not gossiped, validated with `ProvideInherent`. - Extended (Extra data): Gossiped, validated via `TransactionExtension`. - Signed transactions (with a hardcoded signature). - General transactions (without a hardcoded signature). `TransactionExtension` differs from `SignedExtension` because: - A signature on the underlying transaction may validly not be present. - It may alter the origin during validation. - `pre_dispatch` is renamed to `prepare` and need not contain the checks present in `validate`. - `validate` and `prepare` is passed an `Origin` rather than a `AccountId`. - `validate` may pass arbitrary information into `prepare` via a new user-specifiable type `Val`. - `AdditionalSigned`/`additional_signed` is renamed to `Implicit`/`implicit`. It is encoded *for the entire transaction* and passed in to each extension as a new argument to `validate`. This facilitates the ability of extensions to acts as underlying crypto. There is a new `DispatchTransaction` trait which contains only default function impls and is impl'ed for any `TransactionExtension` impler. It provides several utility functions which reduce some of the tedium from using `TransactionExtension` (indeed, none of its regular functions should now need to be called directly). Three transaction version discriminator ("versions") are now permissible: - 0b000000100: Bare (used to be called "Unsigned"): contains Signature or Extra (extension data). After bare transactions are no longer supported, this will strictly identify an Inherents only. - 0b100000100: Old-school "Signed" Transaction: contains Signature and Extra (extension data). - 0b010000100: New-school "General" Transaction: contains Extra (extension data), but no Signature. For the New-school General Transaction, it becomes trivial for authors to publish extensions to the mechanism for authorizing an Origin, e.g. through new kinds of key-signing schemes, ZK proofs, pallet state, mutations over pre-authenticated origins or any combination of the above. ## Code Migration ### NOW: Getting it to build Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be accompanied by renaming your aggregate type in line with the new terminology. E.g. Before: ```rust /// The SignedExtension to the basic transaction logic. pub type SignedExtra = ( /* snip */ MySpecialSignedExtension, ); /// Unchecked extrinsic type as expected by this runtime. pub type UncheckedExtrinsic = generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>; ``` After: ```rust /// The extension to the basic transaction logic. pub type TxExtension = ( /* snip */ AsTransactionExtension<MySpecialSignedExtension>, ); /// Unchecked extrinsic type as expected by this runtime. pub type UncheckedExtrinsic = generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>; ``` You'll also need to alter any transaction building logic to add a `.into()` to make the conversion happen. E.g. Before: ```rust fn construct_extrinsic( /* snip */ ) -> UncheckedExtrinsic { let extra: SignedExtra = ( /* snip */ MySpecialSignedExtension::new(/* snip */), ); let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap(); let signature = payload.using_encoded(|e| sender.sign(e)); UncheckedExtrinsic::new_signed( /* snip */ Signature::Sr25519(signature), extra, ) } ``` After: ```rust fn construct_extrinsic( /* snip */ ) -> UncheckedExtrinsic { let tx_ext: TxExtension = ( /* snip */ MySpecialSignedExtension::new(/* snip */).into(), ); let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap(); let signature = payload.using_encoded(|e| sender.sign(e)); UncheckedExtrinsic::new_signed( /* snip */ Signature::Sr25519(signature), tx_ext, ) } ``` ### SOON: Migrating to `TransactionExtension` Most `SignedExtension`s can be trivially converted to become a `TransactionExtension`. There are a few things to know. - Instead of a single trait like `SignedExtension`, you should now implement two traits individually: `TransactionExtensionBase` and `TransactionExtension`. - Weights are now a thing and must be provided via the new function `fn weight`. #### `TransactionExtensionBase` This trait takes care of anything which is not dependent on types specific to your runtime, most notably `Call`. - `AdditionalSigned`/`additional_signed` is renamed to `Implicit`/`implicit`. - Weight must be returned by implementing the `weight` function. If your extension is associated with a pallet, you'll probably want to do this via the pallet's existing benchmarking infrastructure. #### `TransactionExtension` Generally: - `pre_dispatch` is now `prepare` and you *should not reexecute the `validate` functionality in there*! - You don't get an account ID any more; you get an origin instead. If you need to presume an account ID, then you can use the trait function `AsSystemOriginSigner::as_system_origin_signer`. - You get an additional ticket, similar to `Pre`, called `Val`. This defines data which is passed from `validate` into `prepare`. This is important since you should not be duplicating logic from `validate` to `prepare`, you need a way of passing your working from the former into the latter. This is it. - This trait takes two type parameters: `Call` and `Context`. `Call` is the runtime call type which used to be an associated type; you can just move it to become a type parameter for your trait impl. `Context` is not currently used and you can safely implement over it as an unbounded type. - There's no `AccountId` associated type any more. Just remove it. Regarding `validate`: - You get three new parameters in `validate`; all can be ignored when migrating from `SignedExtension`. - `validate` returns a tuple on success; the second item in the tuple is the new ticket type `Self::Val` which gets passed in to `prepare`. If you use any information extracted during `validate` (off-chain and on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can pass it through with this. For the tuple's last item, just return the `origin` argument. Regarding `prepare`: - This is renamed from `pre_dispatch`, but there is one change: - FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM `validate`!! - (This is different to `SignedExtension` which was required to run the same checks in `pre_dispatch` as in `validate`.) Regarding `post_dispatch`: - Since there are no unsigned transactions handled by `TransactionExtension`, `Pre` is always defined, so the first parameter is `Self::Pre` rather than `Option<Self::Pre>`. If you make use of `SignedExtension::validate_unsigned` or `SignedExtension::pre_dispatch_unsigned`, then: - Just use the regular versions of these functions instead. - Have your logic execute in the case that the `origin` is `None`. - Ensure your transaction creation logic creates a General Transaction rather than a Bare Transaction; this means having to include all `TransactionExtension`s' data. - `ValidateUnsigned` can still be used (for now) if you need to be able to construct transactions which contain none of the extension data, however these will be phased out in stage 2 of the Transactions Horizon, so you should consider moving to an extension-centric design. ## TODO - [x] Introduce `CheckSignature` impl of `TransactionExtension` to ensure it's possible to have crypto be done wholly in a `TransactionExtension`. - [x] Deprecate `SignedExtension` and move all uses in codebase to `TransactionExtension`. - [x] `ChargeTransactionPayment` - [x] `DummyExtension` - [x] `ChargeAssetTxPayment` (asset-tx-payment) - [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment) - [x] `CheckWeight` - [x] `CheckTxVersion` - [x] `CheckSpecVersion` - [x] `CheckNonce` - [x] `CheckNonZeroSender` - [x] `CheckMortality` - [x] `CheckGenesis` - [x] `CheckOnlySudoAccount` - [x] `WatchDummy` - [x] `PrevalidateAttests` - [x] `GenericSignedExtension` - [x] `SignedExtension` (chain-polkadot-bulletin) - [x] `RefundSignedExtensionAdapter` - [x] Implement `fn weight` across the board. - [ ] Go through all pre-existing extensions which assume an account signer and explicitly handle the possibility of another kind of origin. - [x] `CheckNonce` should probably succeed in the case of a non-account origin. - [x] `CheckNonZeroSender` should succeed in the case of a non-account origin. - [x] `ChargeTransactionPayment` and family should fail in the case of a non-account origin. - [ ] - [x] Fix any broken tests. --------- Signed-off-by:Alexandru Vasile <[email protected]> Signed-off-by:
dependabot[bot] <[email protected]> Signed-off-by:
Alexandru Gheorghe <[email protected]> Signed-off-by:
Andrei Sandu <[email protected]> Co-authored-by:
Nikhil Gupta <[email protected]> Co-authored-by:
georgepisaltu <[email protected]> Co-authored-by:
Chevdor <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Maciej <[email protected]> Co-authored-by:
Javier Viola <[email protected]> Co-authored-by:
Marcin S. <[email protected]> Co-authored-by:
Tsvetomir Dimitrov <[email protected]> Co-authored-by:
Javier Bullrich <[email protected]> Co-authored-by:
Koute <[email protected]> Co-authored-by:
Adrian Catangiu <[email protected]> Co-authored-by:
Vladimir Istyufeev <[email protected]>
Co-authored-by: Ross Bulat <[email protected]> Co-authored-by:
Gonçalo Pestana <[email protected]> Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
Svyatoslav Nikolsky <[email protected]> Co-authored-by:
André Silva <[email protected]> Co-authored-by:
s0me0ne-unkn0wn <[email protected]> Co-authored-by:
ordian <[email protected]> Co-authored-by:
Sebastian Kunert <[email protected]> Co-authored-by:
Aaro Altonen <[email protected]> Co-authored-by:
Dmitry Markin <[email protected]> Co-authored-by:
Alexandru Vasile <[email protected]> Co-authored-by:
Alexander Samusev <[email protected]> Co-authored-by:
Julian Eager <[email protected]> Co-authored-by:
Michal Kucharczyk <[email protected]> Co-authored-by:
Davide Galassi <[email protected]> Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
yjh <[email protected]> Co-authored-by:
Tom Mi <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by:
Will | Paradox | ParaNodes.io <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Joshy Orndorff <[email protected]> Co-authored-by:
Joshy Orndorff <[email protected]> Co-authored-by:
PG Herveou <[email protected]> Co-authored-by:
Alexander Theißen <[email protected]> Co-authored-by:
Kian Paimani <[email protected]> Co-authored-by:
Juan Girini <[email protected]> Co-authored-by:
bader y <[email protected]> Co-authored-by:
James Wilson <[email protected]> Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
asynchronous rob <[email protected]> Co-authored-by:
Parth <[email protected]> Co-authored-by:
Andrew Jones <[email protected]> Co-authored-by:
Jonathan Udd <[email protected]> Co-authored-by:
Serban Iorga <[email protected]> Co-authored-by:
Egor_P <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
Evgeny Snitko <[email protected]> Co-authored-by:
Just van Stam <[email protected]> Co-authored-by:
gupnik <[email protected]> Co-authored-by:
dzmitry-lahoda <[email protected]> Co-authored-by:
zhiqiangxu <[email protected]> Co-authored-by:
Nazar Mokrynskyi <[email protected]> Co-authored-by:
Anwesh <[email protected]> Co-authored-by:
cheme <[email protected]> Co-authored-by:
Sam Johnson <[email protected]> Co-authored-by:
kianenigma <[email protected]> Co-authored-by:
Jegor Sidorenko <[email protected]> Co-authored-by:
Muharem <[email protected]> Co-authored-by:
joepetrowski <[email protected]> Co-authored-by:
Alexandru Gheorghe <[email protected]> Co-authored-by:
Gabriel Facco de Arruda <[email protected]> Co-authored-by:
Squirrel <[email protected]> Co-authored-by:
Andrei Sandu <[email protected]> Co-authored-by:
-
- Feb 28, 2024
-
-
Oliver Tale-Yazdi authored
This MR is the merge of https://github.com/paritytech/substrate/pull/14414 and https://github.com/paritytech/substrate/pull/14275. It implements [RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes https://github.com/paritytech/polkadot-sdk/issues/198. ----- This Merge request introduces three major topicals: 1. Multi-Block-Migrations 1. New pallet `poll` hook for periodic service work 1. Replacement hooks for `on_initialize` and `on_finalize` in cases where `poll` cannot be used and some more general changes to FRAME. The changes for each topical span over multiple crates. They are listed in topical order below. # 1.) Multi-Block-Migrations Multi-Block-Migrations are facilitated by creating `pallet_migrations` and configuring `System::Config::MultiBlockMigrator` to point to it. Executive picks this up and triggers one step of the migrations pallet per block. The chain is in lockdown mode for as long as an MBM is ongoing. Executive does this by polling `MultiBlockMigrator::ongoing` and not allowing any transaction in a block, if true. A MBM is defined through trait `SteppedMigration`. A condensed version looks like this: ```rust /// A migration that can proceed in multiple steps. pub trait SteppedMigration { type Cursor: FullCodec + MaxEncodedLen; type Identifier: FullCodec + MaxEncodedLen; fn id() -> Self::Identifier; fn max_steps() -> Option<u32>; fn step( cursor: Option<Self::Cursor>, meter: &mut WeightMeter, ) -> Result<Option<Self::Cursor>, SteppedMigrationError>; } ``` `pallet_migrations` can be configured with an aggregated tuple of these migrations. It then starts to migrate them one-by-one on the next runtime upgrade. Two things are important here: - 1. Doing another runtime upgrade while MBMs are ongoing is not a good idea and can lead to messed up state. - 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`, otherwise it is not used.** The pallet supports an `UpgradeStatusHandler` that can be used to notify external logic of upgrade start/finish (for example to pause XCM dispatch). Error recovery is very limited in the case that a migration errors or times out (exceeds its `max_steps`). Currently the runtime dev can decide in `FailedMigrationHandler::failed` how to handle this. One follow-up would be to pair this with the `SafeMode` pallet and enact safe mode when an upgrade fails, to allow governance to rescue the chain. This is currently not possible, since governance is not `Mandatory`. ## Runtime API - `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to inform the Block Author whether they can push transactions. ### Integration Add it to your runtime implementation of `Core` and `BlockBuilder`: ```patch diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs @@ impl_runtime_apis! { impl sp_block_builder::Core<Block> for Runtime { - fn initialize_block(header: &<Block as BlockT>::Header) { + fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode { Executive::initialize_block(header) } ... } ``` # 2.) `poll` hook A new pallet hook is introduced: `poll`. `Poll` is intended to replace mostly all usage of `on_initialize`. The reason for this is that any code that can be called from `on_initialize` cannot be migrated through an MBM. Currently there is no way to statically check this; the implication is to use `on_initialize` as rarely as possible. Failing to do so can result in broken storage invariants. The implementation of the poll hook depends on the `Runtime API` changes that are explained above. # 3.) Hard-Deadline callbacks Three new callbacks are introduced and configured on `System::Config`: `PreInherents`, `PostInherents` and `PostTransactions`. These hooks are meant as replacement for `on_initialize` and `on_finalize` in cases where the code that runs cannot be moved to `poll`. The reason for this is to make the usage of HD-code (hard deadline) more explicit - again to prevent broken invariants by MBMs. # 4.) FRAME (general changes) ## `frame_system` pallet A new memorize storage item `InherentsApplied` is added. It is used by executive to track whether inherents have already been applied. Executive and can then execute the MBMs directly between inherents and transactions. The `Config` gets five new items: - `SingleBlockMigrations` this is the new way of configuring migrations that run in a single block. Previously they were defined as last generic argument of `Executive`. This shift is brings all central configuration about migrations closer into view of the developer (migrations that are configured in `Executive` will still work for now but is deprecated). - `MultiBlockMigrator` this can be configured to an engine that drives MBMs. One example would be the `pallet_migrations`. Note that this is only the engine; the exact MBMs are injected into the engine. - `PreInherents` a callback that executes after `on_initialize` but before inherents. - `PostInherents` a callback that executes after all inherents ran (including MBMs and `poll`). - `PostTransactions` in symmetry to `PreInherents`, this one is called before `on_finalize` but after all transactions. A sane default is to set all of these to `()`. Example diff suitable for any chain: ```patch @@ impl frame_system::Config for Test { type MaxConsumers = ConstU32<16>; + type SingleBlockMigrations = (); + type MultiBlockMigrator = (); + type PreInherents = (); + type PostInherents = (); + type PostTransactions = (); } ``` An overview of how the block execution now looks like is here. The same graph is also in the rust doc. <details><summary>Block Execution Flow</summary> <p>  </p> </details> ## Inherent Order Moved to https://github.com/paritytech/polkadot-sdk/pull/2154 --------------- ## TODO - [ ] Check that `try-runtime` still works - [ ] Ensure backwards compatibility with old Runtime APIs - [x] Consume weight correctly - [x] Cleanup --------- Signed-off-by:Gavin Wood <[email protected]> Co-authored-by:
-
Liam Aharon authoredCloses https://github.com/paritytech/polkadot-sdk-docs/issues/55 - Changes 'current storage version' terminology to less ambiguous 'in-code storage version' (suggestion by @ggwpez ) - Adds a new example pallet `pallet-example-single-block-migrations` - Adds a new reference doc to replace https://docs.substrate.io/maintain/runtime-upgrades/ (temporarily living in the pallet while we wait for developer hub PR to merge) - Adds documentation for the `storage_alias` macro - Improves `trait Hooks` docs - Improves `trait GetStorageVersion` docs - Update the suggested patterns for using `VersionedMigration`, so that version unchecked migrations are never exported - Prevents accidental usage of version unchecked migrations in runtimes https://github.com/paritytech/substrate/pull/14421#discussion_r1255467895 - Unversioned migration code is kept inside `mod version_unchecked`, versioned code is kept in `pub mod versioned` - It is necessary to use modules to limit visibility because the inner migration must be `pub`. See https://github.com/rust-lang/rust/issues/30905 and https://internals.rust-lang.org/t/lang-team-minutes-private-in-public-rules/4504/40 for more. ### todo - [x] move to reference docs to proper place within sdk-docs (now that https://github.com/paritytech/polkadot-sdk/pull/2102 is merged) - [x] prdoc --------- Co-authored-by:
-
- Feb 26, 2024
-
-
Branislav Kontur authored
## Problem During the bumping of the `polkadot-fellows` repository to `[email protected]`, I encountered a situation where the benchmarks `teleport_assets` and `reserve_transfer_assets` in AssetHubKusama started to fail. This issue arose due to a decreased ED balance for AssetHubs introduced [here](https://github.com/polkadot-fellows/runtimes/pull/158/files#diff-80668ff8e793b64f36a9a3ec512df5cbca4ad448c157a5d81abda1b15f35f1daR213), and also because of a [missing CI pipeline](https://github.com/polkadot-fellows/runtimes/issues/197) to check the benchmarks, which went unnoticed. These benchmarks expect the `caller` to have enough: 1. balance to transfer (BTT) 2. balance for paying delivery (BFPD). So the initial balance was calculated as `ED * 100`, which seems reasonable: ``` const ED_MULTIPLIER: u32 = 100; let balance = existential_deposit.saturating_mul(ED_MULTIPLIER.into());` ``` The problem arises when the price for delivery is 100 times higher than the existential deposit. In other words, when `ED * 100` does not cover `BTT` + `BFPD`. I check AHR/AHW/AHK/AHP and this problem has only AssetHubKusama ``` ED: 3333333 calculated price to parent delivery: 1031666634 (from xcm logs from the benchmark) --- 3333333 * 100 - BTT(3333333) - BFPD(1031666634) = −701666667 ``` which results in the error; ``` 2024-02-23 09:19:42 Unable to charge fee with error Module(ModuleError { index: 31, error: [17, 0, 0, 0], message: Some("FeesNotMet") }) Error: Input("Benchmark pallet_xcm::reserve_transfer_assets failed: FeesNotMet") ``` ## Solution The benchmarks `teleport_assets` and `reserve_transfer_assets` were fixed by removing `ED * 100` and replacing it with `DeliveryHelper` logic, which calculates the (almost real) price for delivery and sets it along with the existential deposit as the initial balance for the account used in the benchmark. ## TODO - [ ] patch for 1.6 - https://github.com/paritytech/polkadot-sdk/pull/3466 - [ ] patch for 1.7 - https://github.com/paritytech/polkadot-sdk/pull/3465 - [ ] patch for 1.8 - TODO: PR --------- Co-authored-by:
-
- Feb 20, 2024
-
-
Branislav Kontur authored
-
Oliver Tale-Yazdi authored
Lifting some more dependencies to the workspace. Just using the most-often updated ones for now. It can be reproduced locally. ```sh # First you can check if there would be semver incompatible bumps (looks good in this case): $ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*" # Then apply the changes: $ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix # And format the changes: $ taplo format --config .config/taplo.toml ``` --------- Signed-off-by:
-
- Feb 16, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 6 updates: | Package | From | To | | --- | --- | --- | | [serde](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` | | [serde_json](https://github.com/serde-rs/json) | `1.0.111` | `1.0.113` | | [clap](https://github.com/clap-rs/clap) | `4.4.18` | `4.5.0` | | [syn](https://github.com/dtolnay/syn) | `2.0.48` | `2.0.49` | | [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.30` | `0.9.31` | | [serde_derive](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` | Updates `serde` from 1.0.195 to 1.0.196 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.196</h2> <ul> <li>Improve formatting of "invalid type" error messages involving floats (<a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a> Release 1.0.196</li> <li><a href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a> from dtolnay/decimalpoint</li> <li><a href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a> Format Unexpected::Float with decimal point</li> <li><a href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a> from dtolnay/workspacedeps</li> <li><a href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a> Fix workspace.dependencies default-features future compat warning</li> <li><a href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a> Sort workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a> from rodoufu/workspaceDependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a> Adding workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a> from Sky9x/msrv-badge</li> <li><a href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a> Use shields.io's MSRV badges</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.111 to 1.0.113 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.113</h2> <ul> <li>Add <code>swap_remove</code> and <code>shift_remove</code> methods on Map (<a href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>)</li> </ul> <h2>v1.0.112</h2> <ul> <li>Improve formatting of "invalid type" error messages involving floats (<a href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/09d865b34b9701be52764dc9bf571b1a16e9d3dc"><code>09d865b</code></a> Release 1.0.113</li> <li><a href="https://github.com/serde-rs/json/commit/5aeab4eaf69d7959f013f8081865c264d6c00551"><code>5aeab4e</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a> from serde-rs/remove</li> <li><a href="https://github.com/serde-rs/json/commit/ca3c2ca3696cab79b8b279be7569ee1647250f1e"><code>ca3c2ca</code></a> Add swap_remove and shift_remove methods on Map</li> <li><a href="https://github.com/serde-rs/json/commit/7fece969e3b480ec620419d65c2aeb08776bebcb"><code>7fece96</code></a> Release 1.0.112</li> <li><a href="https://github.com/serde-rs/json/commit/6a6d2bbd9e8b8bd72573b863f12a4ec991f33232"><code>6a6d2bb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a> from serde-rs/unexpectedfloat</li> <li><a href="https://github.com/serde-rs/json/commit/83d7bad54ba5db3a44198d6df0ff2e81621683fa"><code>83d7bad</code></a> Format f64 in error messages using ryu</li> <li><a href="https://github.com/serde-rs/json/commit/107c2d1c42817f0d71f07a4d5b0ea2f29dbce8b8"><code>107c2d1</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1106">#1106</a> from serde-rs/invalidvalue</li> <li><a href="https://github.com/serde-rs/json/commit/62ca3e4c01c2e62cd5c2a32e9104f386e5ce7808"><code>62ca3e4</code></a> Handle Unexpected::Unit in Error::invalid_value</li> <li><a href="https://github.com/serde-rs/json/commit/296fafb8f32e8442ef8e4d5725c15ffca726b288"><code>296fafb</code></a> Factor out JSON-specific Display impl for serde::de::Unexpected</li> <li><a href="https://github.com/serde-rs/json/commit/e56cc696bd7c112e5dd4ccfa23d094c3a1c1c1ff"><code>e56cc69</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1105">#1105</a> from keienWang/master</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/json/compare/v1.0.111...v1.0.113">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.18 to 4.5.0 <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.5.0] - 2024-02-08</h2> <h3>Compatibility</h3> <ul> <li>Update MSRV to 1.74</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/a751c5fe65cd33cb09e85ff3039b4fd0182cdb6e"><code>a751c5f</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/9ec6c942b81c370a8c14652e42295933244555ac"><code>9ec6c94</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/0735119775c2d27fef6b3c232cb9ef2fcbbd963f"><code>0735119</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/c4d3959506f5068f86ffb7ab34b622bd2da40dd8"><code>c4d3959</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5344">#5344</a> from epage/encode</li> <li><a href="https://github.com/clap-rs/clap/commit/f750e577789e1dd34c6950d8c8fe16d1bfd1f49c"><code>f750e57</code></a> fix(lex): Use new-ish OsStr API</li> <li><a href="https://github.com/clap-rs/clap/commit/1d9a554cdfddffcb92d197706b9720e2760cb443"><code>1d9a554</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5343">#5343</a> from epage/msrv</li> <li><a href="https://github.com/clap-rs/clap/commit/4b45d361b1b96eb1f37b7d1db2684203ca828a94"><code>4b45d36</code></a> chore: Update MSRV to 1.74</li> <li><a href="https://github.com/clap-rs/clap/commit/55b1f945157d4d0e480dea6c492e04d0b541088a"><code>55b1f94</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5342">#5342</a> from epage/divan</li> <li><a href="https://github.com/clap-rs/clap/commit/ea77b98da3f321069ae136a241a2d266c2b28bd7"><code>ea77b98</code></a> test(complete): Make it order independent</li> <li><a href="https://github.com/clap-rs/clap/commit/b0fea2bac60819bdb042e10c032817fded67f815"><code>b0fea2b</code></a> test(bench): Switch to divan</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.18...clap_complete-v4.5.0">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.48 to 2.0.49 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.49</h2> <ul> <li>Improve error location when parsing from an empty string literal using <code>LitStr::parse</code> (<a href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/e64c0636042bcd8cf56f9e6c3e828a49cb434649"><code>e64c063</code></a> Release 2.0.49</li> <li><a href="https://github.com/dtolnay/syn/commit/981359c5f46f25f3db42d1b341cc607f634688e7"><code>981359c</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a> from dtolnay/streof</li> <li><a href="https://github.com/dtolnay/syn/commit/51298d40a447b9e5b3cd8c898c2ea9d24b31cd6d"><code>51298d4</code></a> Improve error location at eof in LitStr::parse</li> <li><a href="https://github.com/dtolnay/syn/commit/270c63384a9d891f65880a03a5a92f0bf4605bbf"><code>270c633</code></a> Update test suite to nightly-2024-02-13</li> <li><a href="https://github.com/dtolnay/syn/commit/dc9cf16b9b0601d2d393d059c46a8f8e0220cc21"><code>dc9cf16</code></a> Remove FilterAttrs trait when unused</li> <li><a href="https://github.com/dtolnay/syn/commit/7dcfac79eda716fa806d68cc0aa811f3be717dc0"><code>7dcfac7</code></a> Ignore dead_code warning in test</li> <li><a href="https://github.com/dtolnay/syn/commit/98318441089f9a9bb596fc010ed14c3b593d4bda"><code>9831844</code></a> Update signature of Emitter::emit_diagnostic in nightly-2024-02-07</li> <li><a href="https://github.com/dtolnay/syn/commit/9e8033f63da93dfb6a3e698449c6edff5e56727d"><code>9e8033f</code></a> Update test suite to nightly-2024-02-07</li> <li><a href="https://github.com/dtolnay/syn/commit/cb3348cd94be50995054796facdfa055b6e0e9e8"><code>cb3348c</code></a> Update test suite to nightly-2024-01-23</li> <li><a href="https://github.com/dtolnay/syn/commit/15b9dbcd67bc56f3da7d33bbede46f7380fc7164"><code>15b9dbc</code></a> Update test suite to nightly-2024-01-19</li> <li>Additional commits viewable in <a href="https://github.com/dtolnay/syn/compare/2.0.48...2.0.49">compare view</a></li> </ul> </details> <br /> Updates `serde_yaml` from 0.9.30 to 0.9.31 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's releases</a>.</em></p> <blockquote> <h2>0.9.31</h2> <ul> <li>Add <code>swap_remove</code> and <code>shift_remove</code> methods on Mapping (<a href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/serde-yaml/commit/2a77483b23897115bdd69af32ae34d593268d555"><code>2a77483</code></a> Release 0.9.31</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/d8d1a839cf42ef4627c66bebd743f5fecd24e3ed"><code>d8d1a83</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a> from dtolnay/remove</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/f8a99a496836ccfa6c547af9136986d13011be98"><code>f8a99a4</code></a> Add swap_remove and shift_remove methods on Mapping</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/8b26413e3307e39329dc68a96b065058aec38f9a"><code>8b26413</code></a> Work around dead_code warning in tests</li> <li>See full diff in <a href="https://github.com/dtolnay/serde-yaml/compare/0.9.30...0.9.31">compare view</a></li> </ul> </details> <br /> Updates `serde_derive` from 1.0.195 to 1.0.196 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde_derive's releases</a>.</em></p> <blockquote> <h2>v1.0.196</h2> <ul> <li>Improve formatting of "invalid type" error messages involving floats (<a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a> Release 1.0.196</li> <li><a href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a> from dtolnay/decimalpoint</li> <li><a href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a> Format Unexpected::Float with decimal point</li> <li><a href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a> from dtolnay/workspacedeps</li> <li><a href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a> Fix workspace.dependencies default-features future compat warning</li> <li><a href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a> Sort workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a> from rodoufu/workspaceDependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a> Adding workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a> from Sky9x/msrv-badge</li> <li><a href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a> Use shields.io's MSRV badges</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Feb 14, 2024
-
-
Sergej Sakac authored
Currently, anyone can registrar a code that exceeds the code size limit when performing the upgrade from the registrar. This PR fixes that and adds a new test to cover this. cc @bkchr @eskimor
-
- Feb 12, 2024
-
-
Oliver Tale-Yazdi authored
Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994): - Set log to `0.4.20` everywhere - Lift `log` to the workspace Starting with a simpler one after seeing https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw . This sets the `default-features` to `false` in the root and then overwrites that in each create to its original value. This is necessary since otherwise the `default` features are additive and its impossible to disable them in the crate again once they are enabled in the workspace. I am using a tool to do this, so its mostly a test to see that it works as expected. --------- Signed-off-by:
-
- Jan 31, 2024
-
-
Branislav Kontur authored
[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657) I started this investigation/issue based on @liamaharon question [here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499). ## Problem The `pallet_balances` integrity test should correctly detect that the runtime has correct distinct `HoldReasons` variant count. I assume the same situation exists for RuntimeFreezeReason. It is not a critical problem, if we set `MaxHolds` with a sufficiently large value, everything should be ok. However, in this case, the integrity_test check becomes less useful. **Situation for "any" runtime:** - `HoldReason` enums from different pallets: ```rust /// from pallet_nis #[pallet::composite_enum] pub enum HoldReason { NftReceipt, } /// from pallet_preimage #[pallet::composite_enum] pub enum HoldReason { Preimage, } // from pallet_state-trie-migration #[pallet::composite_enum] pub enum HoldReason { SlashForContinueMigrate, SlashForMigrateCustomTop, SlashForMigrateCustomChild, } ``` - generated `RuntimeHoldReason` enum looks like: ```rust pub enum RuntimeHoldReason { #[codec(index = 32u8)] Preimage(pallet_preimage::HoldReason), #[codec(index = 38u8)] Nis(pallet_nis::HoldReason), #[codec(index = 42u8)] StateTrieMigration(pallet_state_trie_migration::HoldReason), } ``` - composite enum `RuntimeHoldReason` variant count is detected as `3` - we set `type MaxHolds = ConstU32<3>` - `pallet_balances::integrity_test` is ok with `3`(at least 3) However, the real problem can occur in a live runtime where some functionality might stop working. This is due to a total of 5 distinct hold reasons (for pallets with multi-instance support, it is even more), and not all of them can be used because of an incorrect `MaxHolds`, which is deemed acceptable according to the `integrity_test`: ``` // pseudo-code - if we try to call all of these: T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(), &nft_owner, deposit)?; // With `type MaxHolds = ConstU32<3>` these two will fail T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(), &nft_owner, deposit)?; ``` ## Solutions A macro `#[pallet::*]` expansion is extended of `VariantCount` implementation for the `#[pallet::composite_enum]` enum type. This expansion generates the `VariantCount` implementation for pallets' `HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants must be plain enum values without fields to ensure a deterministic count. The composite runtime enum, `RuntimeHoldReason` and `RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum of pallets' enum `VariantCount::VARIANT_COUNT`: ```rust #[frame_support::pallet(dev_mode)] mod module_single_instance { #[pallet::composite_enum] pub enum HoldReason { ModuleSingleInstanceReason1, ModuleSingleInstanceReason2, } ... } #[frame_support::pallet(dev_mode)] mod module_multi_instance { #[pallet::composite_enum] pub enum HoldReason<I: 'static = ()> { ModuleMultiInstanceReason1, ModuleMultiInstanceReason2, ModuleMultiInstanceReason3, } ... } impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount for RuntimeHoldReason { const VARIANT_COUNT: u32 = 0 + module_single_instance::HoldReason::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT; } ``` In addition, `MaxHolds` is removed (as suggested [here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573)) from `pallet_balances`, and its `Holds` are now bounded to `RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let the runtime specify `MaxHolds`. ## For reviewers Relevant changes can be found here: - `substrate/frame/support/procedural/src/lib.rs` - `substrate/frame/support/procedural/src/pallet/parse/composite.rs` - `substrate/frame/support/procedural/src/pallet/expand/composite.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs` - `substrate/frame/support/src/traits/misc.rs` And the rest of the files is just about removed `MaxHolds` from `pallet_balances` ## Next steps Do the same for `MaxFreezes` https://github.com/paritytech/polkadot-sdk/issues/2997. --------- Co-authored-by: command-bot <> Co-authored-by:
-
- Jan 26, 2024
-
-
Liam Aharon authored
Related https://github.com/paritytech/polkadot-sdk/issues/3032 --- Using https://github.com/liamaharon/cargo-workspace-version-tools/ `cargo run -- sync --path ../polkadot-sdk` --------- Signed-off-by:
-
- Jan 24, 2024
-
-
Sergej Sakac authored
This PR implements phase 1 of: https://github.com/paritytech/polkadot-sdk/pull/2372#discussion_r1461873933 NOTE: This means that all the current parachains can upgrade their code to the maximum size for free. --------- Co-authored-by:
Radha <[email protected]>
-
- Jan 22, 2024
-
-
joe petrowski authored
Clean up all the old syntax. --------- Co-authored-by: command-bot <> Co-authored-by:
Maksym H <[email protected]>
-
- Jan 18, 2024
-
-
Tsvetomir Dimitrov authored
Backport of https://github.com/paritytech/polkadot-sdk/pull/1863 to master Extend candidate sanitation in paras_inherent by removing backing votes from disabled validators. Check https://github.com/paritytech/polkadot-sdk/issues/1592 for more details. This change is related to the disabling strategy implementation (https://github.com/paritytech/polkadot-sdk/pull/2226). --------- Co-authored-by:
ordian <[email protected]> Co-authored-by:
-
- Jan 16, 2024
-
-
Francisco Aguirre authored
# Note for reviewer Most changes are just syntax changes necessary for the new version. Most important files should be the ones under the `xcm` folder. # Description Added XCMv4. ## Removed `Multi` prefix The following types have been renamed: - MultiLocation -> Location - MultiAsset -> Asset - MultiAssets -> Assets - InteriorMultiLocation -> InteriorLocation - MultiAssetFilter -> AssetFilter - VersionedMultiAsset -> VersionedAsset - WildMultiAsset -> WildAsset - VersionedMultiLocation -> VersionedLocation In order to fix a name conflict, the `Assets` in `xcm-executor` were renamed to `HoldingAssets`, as they represent assets in holding. ## Removed `Abstract` asset id It was not being used anywhere and this simplifies the code. Now assets are just constructed as follows: ```rust let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into(); ``` No need for specifying `Concrete` anymore. ## Outcome is now a named fields struct Instead of ```rust pub enum Outcome { Complete(Weight), Incomplete(Weight, Error), Error(Error), } ``` we now have ```rust pub enum Outcome { Complete { used: Weight }, Incomplete { used: Weight, error: Error }, Error { error: Error }, } ``` ## Added Reanchorable trait Now both locations and assets implement this trait, making it easier to reanchor both. ## New syntax for building locations and junctions Now junctions are built using the following methods: ```rust let location = Location { parents: 1, interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into() }; ``` or ```rust let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]); ``` And they are matched like so: ```rust match location.unpack() { (1, [Parachain(id)]) => ... (0, Here) => ..., (1, [_]) => ..., } ``` This syntax is mandatory in v4, and has been also implemented for v2 and v3 for easier migration. This was needed to make all sizes smaller. # TODO - [x] Scaffold v4 - [x] Port github.com/paritytech/polkadot/pull/7236 - [x] Remove `Multi` prefix - [x] Remove `Abstract` asset id --------- Co-authored-by: command-bot <> Co-authored-by:Keith Yeung <[email protected]>
-
- Jan 10, 2024
-
-
joe petrowski authored
This PR allows _username authorities_ to issue unique usernames that correspond with an account. It also provides two-way lookup, that is from `AccountId` to a single, "primary" `Username` (alongside `Registration`) and multiple unique `Username`s to an `AccountId`. Key features: - Username Authorities added (and removed) via privileged origin. - Authorities have a `suffix` and an `allocation`. They can grant up to `allocation` usernames. Their `suffix` will be appended to the usernames that they issue. A suffix may be up to 7 characters long. - Users can ask an authority to grant them a username. This will take the form `myusername.suffix`. The entire name (including suffix) must be less than or equal to 32 alphanumeric characters. - Users can approve a username for themselves in one of two ways (that is, authorities cannot grant them arbitrarily): - Pre-sign the entire username (including suffix) with a secret key that corresponds to their `AccountId` (for keyed accounts, obviously); or - Accept the username after it has been granted by an authority (it will be queued until accepted) (for non-keyed accounts like pure proxies or multisigs). - The system does not require any funds or deposits. Users without an identity will be given a default one (presumably all fields set to `None`). If they update this info, they will need to place the normal storage deposit. - If a user does not have any username, their first one will be set as `Primary`, and their `AccountId` will map to that one. If they get subsequent usernames, they can choose which one to be their primary via `set_primary_username`. - There are some state cleanup functions to remove expired usernames that have not been accepted and dangling usernames whose owners have called `clear_identity`. TODO: - [x] Add migration to runtimes - [x] Probably do off-chain migration into People Chain genesis - [x] Address a few TODO questions in code (please review) --------- Co-authored-by:
-
- Jan 09, 2024
-
-
Oliver Tale-Yazdi authored
Removing some bounds as it came up in https://github.com/paritytech/polkadot-sdk/pull/2726 while still keeping `Send + Sync` capabilities. --------- Signed-off-by:
-
- Jan 07, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 4 updates: [serde](https://github.com/serde-rs/serde), [serde_json](https://github.com/serde-rs/json), [clap](https://github.com/clap-rs/clap) and [syn](https://github.com/dtolnay/syn). Updates `serde` from 1.0.194 to 1.0.195 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.195</h2> <ul> <li>Prevent remote definitions of tuple struct or tuple variant from triggering dead_code warning (<a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a> Release 1.0.195</li> <li><a href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a> from dtolnay/deadremote</li> <li><a href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a> Revert "Add FIXME to fix dead_code warning when using serde(remote)"</li> <li><a href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a> Fix new dead_code warning in tuple struct and tuple variant remote defs</li> <li><a href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a> Add FIXME to fix dead_code warning when using serde(remote)</li> <li><a href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a> Work around dead_code warning in tests</li> <li><a href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a> from serde-rs/exhaustive</li> <li><a href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a> Fill in omitted patterns for GenericArguments match</li> <li><a href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.110 to 1.0.111 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.111</h2> <ul> <li>Improve floating point parsing performance on loongarch64 (<a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>, thanks <a href="https://github.com/heiher"><code>@heiher</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a> Release 1.0.111</li> <li><a href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a> from heiher/limb-64-la64</li> <li><a href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a> Set limb width to 64 for loongarch64</li> <li>See full diff in <a href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.12 to 4.4.13 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.13</h2> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a> docs: Correct link to StructOpt migration guide</li> <li><a href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a> from Manishearth/safety-docs</li> <li><a href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a> Correct safety docs</li> <li><a href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a> from henry-hsieh/fix-nosort</li> <li><a href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a> fix: Skip nosort option below bash 4.4</li> <li><a href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a> from clap-rs/renovate/actions-setup-python-5.x</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.47 to 2.0.48 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.48</h2> <ul> <li>Improve error message on unexpected token after <code>else</code> (<a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a> Release 2.0.48</li> <li><a href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a> from dtolnay/elseblock</li> <li><a href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a> Fix error message on unexpected token after 'else'</li> <li><a href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a> from dtolnay/exhaustive</li> <li><a href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Jan 04, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 4 updates: [serde](https://github.com/serde-rs/serde), [serde_json](https://github.com/serde-rs/json), [clap](https://github.com/clap-rs/clap) and [serde_yaml](https://github.com/dtolnay/serde-yaml). Updates `serde` from 1.0.193 to 1.0.194 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.194</h2> <ul> <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper such as sccache</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a> Release 1.0.194</li> <li><a href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a> from dtolnay/optionifletelse</li> <li><a href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a> Remove option_if_let_else clippy suppression</li> <li><a href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a> Work around doc_link_with_quotes pedantic clippy lint</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.108 to 1.0.110 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.109</h2> <ul> <li>Documentation improvements</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a> Release 1.0.110</li> <li><a href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a> Release 1.0.109</li> <li><a href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a> from serde-rs/doccfg</li> <li><a href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a> Restore doc cfg on re-exports</li> <li><a href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a> from dtolnay/hashtest</li> <li><a href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a> Eliminate hash closure in favor of calling hash_one directly</li> <li><a href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a> Use BuildHasher::hash_one</li> <li><a href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a> Use random hasher state for number hashing test</li> <li><a href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a> Delete trace_macros! functionality from test</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.11 to 4.4.12 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.12</h2> <h2>[4.4.12] - 2023-12-28</h2> <h3>Performance</h3> <ul> <li>Only ask <code>TypedValueParser</code> for possible values if needed</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.12] - 2023-12-28</h2> <h3>Performance</h3> <ul> <li>Only ask <code>TypedValueParser</code> for possible values if needed</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a> from vermiculus/sa/avoid-pv-expansion-in-help</li> <li><a href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a> perf: Avoid retrieving possible_values unless used</li> <li><a href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a> test: Update snapshots</li> <li><a href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a> docs(complete): Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a> docs(complete): Polish API reference for dynamic</li> <li><a href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a> from epage/docsrs</li> <li><a href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a> docs: Include more content on docs.rs</li> <li>See full diff in <a href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare view</a></li> </ul> </details> <br /> Updates `serde_yaml` from 0.9.29 to 0.9.30 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's releases</a>.</em></p> <blockquote> <h2>0.9.30</h2> <ul> <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper such as sccache</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a> Release 0.9.30</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a> from dtolnay/optionifletelse</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a> Remove option_if_let_else clippy suppression</li> <li>See full diff in <a href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Dec 27, 2023
-
-
eskimor authored
And have proper benchmarks. --------- Co-authored-by:
eskimor <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
-
- Dec 22, 2023
-
-
joe petrowski authored
Rococo and Westend runtimes for the "People Chain". This chain contains the Identity pallet with plans to migrate all related data from the Relay Chain. Changes `IdentityInfo` to: - Remove `additional_fields`. - Add `github` and `discord` as first class fields. From scraping chain data, these were the only two additional fields used (for the Fellowship and Ambassador Program, respectively). - Rename `riot` to `matrix`. Note: This will use the script in https://github.com/paritytech/polkadot-sdk/pull/2025 to generate the genesis state. TODO: - [x] https://github.com/paritytech/polkadot-sdk/pull/1814 and integration of the Identity Migrator pallet for migration. - [x] Tests: https://github.com/paritytech/polkadot-sdk/pull/2373 --------- Co-authored-by:
Richard Melkonian <[email protected]> Co-authored-by:
-
- Dec 21, 2023
-
-
eskimor authored
Also fixes: https://github.com/paritytech/polkadot-sdk/issues/1417 - [x] CoreIndex -> AssignmentProvider mapping will be able to change any time. - [x] Implement - [x] Provide Migrations - [x] Add and fix tests - [x] Implement bulk assigner logic - [x] bulk assigner tests - [x] Port over current assigner to use bulk designer (+ share on-demand with bulk): top-level assigner has core ranges: legacy, bulk - [x] Adjust migrations to reflect new assigner structure - [x] Move migration code to Assignment code directly and make it recursive (make it possible to skip releases) -> follow up ticket. - [x] Test migrations - [x] Add migration PR to runtimes repo -> follow up ticket. - [x] Wire up with actual UMP messages - [x] Write PR docs --------- Co-authored-by:
Bradley Olson <[email protected]> Co-authored-by:
BradleyOlson64 <[email protected]> Co-authored-by:
Anton Vilhelm Ásgeirsson <[email protected]> Co-authored-by:
antonva <[email protected]> Co-authored-by:
-
- Dec 18, 2023
-
-
Branislav Kontur authored
This PR contains just a few clippy fixes and nits, which are, however, relaxed by workspace clippy settings here: https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506 --------- Co-authored-by:
Dmitry Sinyavin <[email protected]> Co-authored-by:
-
- Dec 13, 2023
-
-
Squirrel authored
We currently use a bit of a hack in `.cargo/config` to make sure that clippy isn't too annoying by specifying the list of lints. There is now a stable way to define lints for a workspace. The only down side is that every crate seems to have to opt into this so there's a *few* files modified in this PR. Dependencies: - [x] PR that upgrades CI to use rust 1.74 is merged. --------- Co-authored-by:
-
- Dec 11, 2023
-
-
Gabriel Facco de Arruda authored
This PR makes the block number provider configurable through the Config trait in pallet-vesting, this gives parachains the option to use the relay chain block number provider from ParachainSystem. --------- Co-authored-by:
-
- Dec 08, 2023
-
-
Muharem Ismailov authored
Treasury Pallet Instance for the Fellowship in Westend Collectives. In this update, we present a Treasury Pallet Instance that is under the control of the Fellowship body, with oversight from the Root and Treasurer origins. Here's how it is governed: - the Root origin have the authority to reject or approve spend proposals, with no amount limit for approvals. - the Treasurer origin have the authority to reject or approve spend proposals, with approval limits of up to 10,000,000 DOT. - Voice of all Fellows ranked at 3 or above can reject or approve spend proposals, with a maximum approval limit of 10,000 DOT. - Voice of Fellows ranked at 4 or above can also reject or approve spend proposals, with a maximum approval limit of 10,000,000 DOT. Additionally, we introduce the Asset Rate Pallet Instance to establish conversion rates from asset A to B. This is used to determine if a proposed spend amount involving a non-native asset is permissible by the commanding origin. The rates can be set up by the Root, Treasurer origins, or Voice of all Fellows. --------- Co-authored-by:
-
- Dec 01, 2023
-
-
Liam Aharon authored
Using taplo, fixes all our broken and inconsistent toml formatting and adds CI to keep them tidy. If people want we can customise the format rules as described here https://taplo.tamasfe.dev/configuration/formatter-options.html @ggwpez , I suggest zepter is used only for checking features are propagated, and leave formatting for taplo to avoid duplicate work and conflicts. TODO - [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet tests instead of deleting the dir --------- Signed-off-by:
-
- Nov 30, 2023
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 2 updates: [serde](https://github.com/serde-rs/serde) and [clap](https://github.com/clap-rs/clap). Updates `serde` from 1.0.188 to 1.0.193 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.193</h2> <ul> <li>Fix field names used for the deserialization of <code>RangeFrom</code> and <code>RangeTo</code> (<a href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>, <a href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>, <a href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>, thanks <a href="https://github.com/emilbonnek"><code>@emilbonnek</code></a>)</li> </ul> <h2>v1.0.192</h2> <ul> <li>Allow internal tag field in untagged variant (<a href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>, thanks <a href="https://github.com/robsdedude"><code>@robsdedude</code></a>)</li> </ul> <h2>v1.0.191</h2> <ul> <li>Documentation improvements</li> </ul> <h2>v1.0.190</h2> <ul> <li>Preserve NaN sign when deserializing f32 from f64 or vice versa (<a href="https://redirect.github.com/serde-rs/serde/issues/2637">#2637</a>)</li> </ul> <h2>v1.0.189</h2> <ul> <li>Fix "cannot infer type" error when internally tagged enum contains untagged variant (<a href="https://redirect.github.com/serde-rs/serde/issues/2613">#2613</a>, thanks <a href="https://github.com/ahl"><code>@ahl</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/44613c7d0190dbb5ecd2d5ec19c636f45b7488cc"><code>44613c7</code></a> Release 1.0.193</li> <li><a href="https://github.com/serde-rs/serde/commit/c706281df3c8d50dba1763f19c856df2746eba6c"><code>c706281</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a> from dtolnay/rangestartend</li> <li><a href="https://github.com/serde-rs/serde/commit/65d75b8fe3105f00ab2e01537d568d4587167582"><code>65d75b8</code></a> Add RangeFrom and RangeTo tests</li> <li><a href="https://github.com/serde-rs/serde/commit/332b0cba40bcbcc7a6b23a9706277c54791a9856"><code>332b0cb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a> from dtolnay/rangestartend</li> <li><a href="https://github.com/serde-rs/serde/commit/8c4af412969086bc8f54fdc2a079d373632e0a03"><code>8c4af41</code></a> Fix more RangeFrom / RangeEnd mixups</li> <li><a href="https://github.com/serde-rs/serde/commit/24a78f071b22ae491eec4127be696ac255b9b5d3"><code>24a78f0</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a> from emilbonnek/fix/range-to-from-de-mixup</li> <li><a href="https://github.com/serde-rs/serde/commit/c91c33436d7aaef7472ebc18b734ddc9b5bd11fa"><code>c91c334</code></a> Fix Range{From,To} deserialize mixup</li> <li><a href="https://github.com/serde-rs/serde/commit/2083f43a287cac8302009fda5bbe41518dd83209"><code>2083f43</code></a> Update ui test suite to nightly-2023-11-19</li> <li><a href="https://github.com/serde-rs/serde/commit/4676abdc9e6bbbddfb33a00ce8d7e81e92f01120"><code>4676abd</code></a> Release 1.0.192</li> <li><a href="https://github.com/serde-rs/serde/commit/35700eb23e21d8cb198ef4a422ddad13b855ce3b"><code>35700eb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a> from robsdedude/fix/2643/allow-tag-field-in-untagged</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/serde/compare/v1.0.188...v1.0.193">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.6 to 4.4.10 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.10</h2> <h2>[4.4.10] - 2023-11-28</h2> <h3>Documentation</h3> <ul> <li>Link out to changelog</li> <li>Cross link derive's attribute reference to derive tutorial</li> </ul> <h2>v4.4.9</h2> <h2>[4.4.9] - 2023-11-27</h2> <h3>Fixes</h3> <ul> <li><em>(help)</em> Show correct <code>Command::about</code> under flattened headings</li> <li><em>(help)</em> Respect <code>hide</code> when flattening subcommands</li> </ul> <h2>v4.4.8</h2> <h2>[4.4.8] - 2023-11-10</h2> <h3>Features</h3> <ul> <li>Add <code>Command::flatten_help</code> to allow <code>git stash -h</code> like help for subcommands</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.10] - 2023-11-28</h2> <h3>Documentation</h3> <ul> <li>Link out to changelog</li> <li>Cross link derive's attribute reference to derive tutorial</li> </ul> <h2>[4.4.9] - 2023-11-27</h2> <h3>Fixes</h3> <ul> <li><em>(help)</em> Show correct <code>Command::about</code> under flattened headings</li> <li><em>(help)</em> Respect <code>hide</code> when flattening subcommands</li> </ul> <h2>[4.4.8] - 2023-11-10</h2> <h3>Features</h3> <ul> <li>Add <code>Command::flatten_help</code> to allow <code>git stash -h</code> like help for subcommands</li> </ul> <h2>[4.4.7] - 2023-10-24</h2> <h3>Performance</h3> <ul> <li>Reduced code size</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/c0a1814d3c1d93c18faaedc95fd251846e47f4fe"><code>c0a1814</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/c83e681e20b05f7e128088f47f8fcfc44e8ea166"><code>c83e681</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/91bcac4ca9d442786f554abeb7b1ed6d7a464a42"><code>91bcac4</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5230">#5230</a> from epage/migrate</li> <li><a href="https://github.com/clap-rs/clap/commit/030d87505d150345ddd425c1df21c034d2ae7748"><code>030d875</code></a> docs: Link out to the changelog at the relevant tag</li> <li><a href="https://github.com/clap-rs/clap/commit/b661a9de04aebd1adaaafdbf7e470f07a8d8a36d"><code>b661a9d</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5229">#5229</a> from epage/derive</li> <li><a href="https://github.com/clap-rs/clap/commit/a08587b00e347492165ded1415bad6ab339e9f0b"><code>a08587b</code></a> docs(derive): Link to tutorial sections for attributes</li> <li><a href="https://github.com/clap-rs/clap/commit/21b671f689bc0b8d790dc8c42902c22822bf6f82"><code>21b671f</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/93ba76dbaaf9136313a4fe2978693cc39fa467dd"><code>93ba76d</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/c1c55b30d853446e2cab78664c0d22c1b77d4dfd"><code>c1c55b3</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5228">#5228</a> from epage/flat</li> <li><a href="https://github.com/clap-rs/clap/commit/b13f6d98622b80ba30e63c2c6e65d218cc8a4de3"><code>b13f6d9</code></a> fix(help): Hide 'help' if only flattened subcommand</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.6...v4.4.10">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Nov 28, 2023
-
-
gupnik authored
Step in https://github.com/paritytech/polkadot-sdk/issues/171 This PR adds `derive_impl` on all `frame_system` config impls for mock runtimes. The overridden configs are maintained as of now to ensure minimal changes. --------- Co-authored-by:
-
- Nov 15, 2023
-
-
joe petrowski authored
The goal of this PR is to migrate Identity deposits from the Relay Chain to a system parachain. The problem I want to solve is that `IdentityOf` and `SubsOf` both store an amount that's held in reserve as a storage deposit. When migrating to a parachain, we can take a snapshot of the actual `IdentityInfo` and sub-account mappings, but should migrate (off chain) the `deposit`s to zero, since the chain (and by extension, accounts) won't have any funds at genesis. The good news is that we expect parachain deposits to be significantly lower (possibly 100x) on the parachain. That is, a deposit of 21 DOT on the Relay Chain would need 0.21 DOT on a parachain. This PR proposes to migrate the deposits in the following way: 1. Introduces a new pallet with two extrinsics: - `reap_identity`: Has a configurable `ReapOrigin`, which would be set to `EnsureSigned` on the Relay Chain (i.e. callable by anyone) and `EnsureRoot` on the parachain (we don't want identities reaped from there). - `poke_deposit`: Checks what deposit the pallet holds (at genesis, zero) and attempts to update the amount based on the calculated deposit for storage data. 2. `reap_identity` clears all storage data for a `target` account and unreserves their deposit. 3. A `ReapIdentityHandler` teleports the necessary DOT to the parachain and calls `poke_deposit`. Since the parachain deposit is much lower, and was just unreserved, we know we have enough. One awkwardness I ran into was that the XCMv3 instruction set does not provide a way for the system to teleport assets without a fee being deducted on reception. Users shouldn't have to pay a fee for the system to migrate their info to a more efficient location. So I wrote my own program and did the `InitiateTeleport` accounting on my own to send a program with `UnpaidExecution`. Have discussed an `InitiateUnpaidTeleport` instruction with @franciscoaguirre . Obviously any chain executing this would have to pass a `Barrier` for free execution. TODO: - [x] Confirm People Chain ParaId - [x] Confirm People Chain deposit rates (determined in https://github.com/paritytech/polkadot-sdk/pull/2281) - [x] Add pallet to Westend --------- Co-authored-by:
-
- Nov 10, 2023
-
-
Liam Aharon authored
As suggested by @ggwpez (https://github.com/paritytech/polkadot-sdk/pull/2142#discussion_r1388145872), remove the `VersionChecked` prefix from version checked migrations (but leave `VersionUnchecked` prefixes) --------- Co-authored-by: command-bot <>
-
- Nov 09, 2023
-
-
Oliver Tale-Yazdi authored
Missing descriptions (47): - [x] `cumulus/client/collator/Cargo.toml` - [x] `cumulus/client/relay-chain-inprocess-interface/Cargo.toml` - [x] `cumulus/client/cli/Cargo.toml` - [x] `cumulus/client/service/Cargo.toml` - [x] `cumulus/client/relay-chain-rpc-interface/Cargo.toml` - [x] `cumulus/client/relay-chain-interface/Cargo.toml` - [x] `cumulus/client/relay-chain-minimal-node/Cargo.toml` - [x] `cumulus/parachains/pallets/parachain-info/Cargo.toml` - [x] `cumulus/parachains/pallets/ping/Cargo.toml` - [x] `cumulus/primitives/utility/Cargo.toml` - [x] `cumulus/primitives/aura/Cargo.toml` - [x] `cumulus/primitives/core/Cargo.toml` - [x] `cumulus/primitives/parachain-inherent/Cargo.toml` - [x] `cumulus/test/relay-sproof-builder/Cargo.toml` - [x] `cumulus/pallets/xcmp-queue/Cargo.toml` - [x] `cumulus/pallets/dmp-queue/Cargo.toml` - [x] `cumulus/pallets/xcm/Cargo.toml` - [x] `polkadot/erasure-coding/Cargo.toml` - [x] `polkadot/statement-table/Cargo.toml` - [x] `polkadot/primitives/Cargo.toml` - [x] `polkadot/rpc/Cargo.toml` - [x] `polkadot/node/service/Cargo.toml` - [x] `polkadot/node/core/parachains-inherent/Cargo.toml` - [x] `polkadot/node/core/approval-voting/Cargo.toml` - [x] `polkadot/node/core/dispute-coordinator/Cargo.toml` - [x] `polkadot/node/core/av-store/Cargo.toml` - [x] `polkadot/node/core/chain-api/Cargo.toml` - [x] `polkadot/node/core/prospective-parachains/Cargo.toml` - [x] `polkadot/node/core/backing/Cargo.toml` - [x] `polkadot/node/core/provisioner/Cargo.toml` - [x] `polkadot/node/core/runtime-api/Cargo.toml` - [x] `polkadot/node/core/bitfield-signing/Cargo.toml` - [x] `polkadot/node/network/dispute-distribution/Cargo.toml` - [x] `polkadot/node/network/bridge/Cargo.toml` - [x] `polkadot/node/network/collator-protocol/Cargo.toml` - [x] `polkadot/node/network/approval-distribution/Cargo.toml` - [x] `polkadot/node/network/availability-distribution/Cargo.toml` - [x] `polkadot/node/network/bitfield-distribution/Cargo.toml` - [x] `polkadot/node/network/gossip-support/Cargo.toml` - [x] `polkadot/node/network/availability-recovery/Cargo.toml` - [x] `polkadot/node/collation-generation/Cargo.toml` - [x] `polkadot/node/overseer/Cargo.toml` - [x] `polkadot/runtime/parachains/Cargo.toml` - [x] `polkadot/runtime/common/slot_range_helper/Cargo.toml` - [x] `polkadot/runtime/metrics/Cargo.toml` - [x] `polkadot/xcm/pallet-xcm-benchmarks/Cargo.toml` - [x] `polkadot/utils/generate-bags/Cargo.toml` - [x] `substrate/bin/minimal/runtime/Cargo.toml` --------- Signed-off-by:
alindima <[email protected]> Co-authored-by:
-
- Nov 07, 2023
-
-
Xiliang Chen authored
Part of #2186 The only usage of pallet-asset-rate is guarded by `runtime-benchmarks` feature. I don't want ORML to be forced to include this pallet in deps for no good reason.
-
![dependabot[bot]'s avatar](https://secure.gravatar.com/avatar/bd5a8d6c673b738d52b0ac42a110045f3f964b3ebfc1d60ea805af743b1dc0e6?s=80&d=identicon "dependabot[bot]")
