Based on issue
[#2512](https://github.com/paritytech/polkadot-sdk/issues/2512

), it
seems that some ecosystem teams are using these networks to set up their
staging environments and test certain use cases, some of them involving
sending XCMs from the relay with origins not allowed in the current
configuration.

This change reverts the configuration of `SendXcmOrigin`.

---------

Co-authored-by: Adrian Catangiu <[email protected]>

Make taplo happy

There was a typo, so now, there's no more typo.

Co-authored-by: Liam Aharon <[email protected]>

Small refactoring to reduce the algorithmic complexity of the initial
message distribution in approval voting after a sync from O(n_candidates
^ 2) to O(n_candidates).

Changes needed to implement the runtime part of elastic scaling:
https://github.com/paritytech/polkadot-sdk/issues/3131,
https://github.com/paritytech/polkadot-sdk/issues/3132,
https://github.com/paritytech/polkadot-sdk/issues/3202

Also fixes https://github.com/paritytech/polkadot-sdk/issues/3675

TODOs:

- [x] storage migration
- [x] optimise process_candidates from O(N^2)
- [x] drop backable candidates which form cycles
- [x] fix unit tests
- [x] add more unit tests
- [x] check the runtime APIs which use the pending availability storage.
We need to expose all of them, see
https://github.com/paritytech/polkadot-sdk/issues/3576
- [x] optimise the candidate selection. we're currently picking randomly
until we satisfy the weight limit. we need to be smart about not
breaking candidate chains while being fair to all paras -
https://github.com/paritytech/polkadot-sdk/pull/3573

Relies on the changes made in
https://github.com/paritytech/polkadot-sdk/pull/3233

 in terms of the
inclusion policy and the candidate ordering

---------

Signed-off-by: alindima <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: eskimor <[email protected]>

This PR backports small reformatting of the release notes templates.

This PR backports:
- node version bump
- `spec_vesion` bump
- reordering of the `prdocs` to the appropriate folder
from the `1.9.0` release branch

Step in https://github.com/paritytech/polkadot-sdk/issues/3688

This PR proposes enabling PoV reclaim on the `rococo-parachain`
testchain to streamline testing and development of high-TPS stuff.

We witnessed really poor performance on Rococo, where we ended up with
50 on-demand cores. This was due to the fact that for each core the full
queue was processed. With this change full queue processing will happen
way less often (most of the time complexity is O(1) or O(log(n))) and if
it happens then only for one core (in expectation).

Also spot price is now updated before each order to ensure economic back
pressure.


TODO:

- [x] Implement
- [x] Basic tests
- [x] Add more tests (see todos)
- [x] Run benchmark to confirm better performance, first results suggest
> 100x faster.
- [x] Write migrations
- [x] Bump scale-info version and remove patch in Cargo.toml
- [x] Write PR docs: on-demand performance improved, more on-demand
cores are now non problematic anymore. If need by also the max queue
size can be increased again. (Maybe not to 10k)

Optional: Performance can be improved even more, if we called
`pop_assignment_for_core()`, before calling `report_processed` (Avoid
needless affinity drops). The effect gets smaller the larger the claim
queue and I would only go for it, if it does not add complexity to the
scheduler.

---------

Co-authored-by: eskimor <[email protected]>
Co-authored-by: antonva <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>
Co-authored-by: ordian <[email protected]>

_This PR is being continued from
https://github.com/paritytech/polkadot-sdk/pull/2206, which was closed
when the developer_hub was merged._
closes https://github.com/paritytech/polkadot-sdk-docs/issues/44

---
# Description

This PR adds a reference document to the `developer-hub` crate (see
https://github.com/paritytech/polkadot-sdk/pull/2102

). This specific
reference document covers defensive programming practices common within
the context of developing a runtime with Substrate.

In particular, this covers the following areas: 

- Default behavior of how Rust deals with numbers in general
- How to deal with floating point numbers in runtime / fixed point
arithmetic
- How to deal with Integer overflows
- General "safe math" / defensive programming practices for common
pallet development scenarios
- Defensive traits that exist within Substrate, i.e.,
`defensive_saturating_add `, `defensive_unwrap_or`
- More general defensive programming examples (keep it concise)
- Link to relevant examples where these practices are actually in
production / being used
- Unwrapping (or rather lack thereof) 101

todo
-- 
- [x] Apply feedback from previous PR
- [x] This may warrant a PR to append some of these docs to
`sp_arithmetic`

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Radha <[email protected]>

Bumps [anyhow](https://github.com/dtolnay/anyhow) from 1.0.75 to 1.0.81.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/anyhow/releases">anyhow's
releases</a>.</em></p>
<blockquote>
<h2>1.0.81</h2>
<ul>
<li>Make backtrace support available when using -Dwarnings (<a
href="https://redirect.github.com/dtolnay/anyhow/issues/354">#354</a>)</li>
</ul>
<h2>1.0.80</h2>
<ul>
<li>Fix unused_imports warnings when compiled by rustc 1.78</li>
</ul>
<h2>1.0.79</h2>
<ul>
<li>Work around improperly cached build script result by sccache (<a
href="https://redirect.github.com/dtolnay/anyhow/issues/340">#340</a>)</li>
</ul>
<h2>1.0.78</h2>
<ul>
<li>Reduce spurious rebuilds under RustRover IDE when using a nightly
toolchain (<a
href="https://redirect.github.com/dtolnay/anyhow/issues/337">#337</a>)</li>
</ul>
<h2>1.0.77</h2>
<ul>
<li>Make <code>anyhow::Error::backtrace</code> available on stable Rust
compilers 1.65+ (<a
href="https://redirect.github.com/dtolnay/anyhow/issues/293">#293</a>,
thanks <a
href="https://github.com/LukasKalbertodt"><code>@​LukasKalbertodt</code></a>)</li>
</ul>
<h2>1.0.76</h2>
<ul>
<li>Opt in to <code>unsafe_op_in_unsafe_fn</code> lint (<a
href="https://redirect.github.com/dtolnay/anyhow/issues/329">#329</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/anyhow/commit/4aad4edebd9f09247d6c6b6784419a74bb116829"><code>4aad4ed</code></a>
Release 1.0.81</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/8be90917c603199c5d1fdd73984237f023768e22"><code>8be9091</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/anyhow/issues/354">#354</a>
from dtolnay/deadcode</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/a2eb7dd5e13add83f254b6dac0f68e043effc521"><code>a2eb7dd</code></a>
Make compatible with -Dwarnings</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/54437197ee79c20678db433d98616fab7ddff1a5"><code>5443719</code></a>
Release 1.0.80</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/dfc7bc07d4c41b61093c3251ed82becb51810bd4"><code>dfc7bc0c</code></a>
Work around prelude redundant import warnings</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/6e4f86b48b5182ec71dbc8e308db9dc91e2ec8a5"><code>6e4f86b</code></a>
Import from alloc not std, where possible</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/f885a133ede579c45e90ab489455126403d05db1"><code>f885a13</code></a>
Ignore incompatible_msrv clippy false positives in test</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/fefbcbcb0b336a2d6c2ce6f0ee6d3fd02ef2cd3b"><code>fefbcbc</code></a>
Ignore incompatible_msrv clippy lint</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/78f2d81cc71b79050a2fda270c45ff267557d853"><code>78f2d81</code></a>
Update ui test suite to nightly-2024-02-08</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/edd88d3a43f11f1931330d3dd54189353ef00203"><code>edd88d3</code></a>
Update ui test suite to nightly-2024-01-31</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/anyhow/compare/1.0.75...1.0.81">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=anyhow&package-manager=cargo&previous-version=1.0.75&new-version=1.0.81)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores

)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

The PR adds two things:
1. Runtime API exposing the whole claim queue
2. Consumes the API in `collation-generation` to fetch the next
scheduled `ParaEntry` for an occupied core.

Related to https://github.com/paritytech/polkadot-sdk/issues/1797

Co-authored-by: command-bot <>

Bump zombienet version, this version have the latest version of
`@polkadot/api` module and fix the failures in CI (e.g
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/5570106).

Thanks!

Introduces `CryptoBytes` type defined as:

```rust
pub struct CryptoBytes<const N: usize, Tag = ()>(pub [u8; N], PhantomData<fn() -> Tag>);
```

The type implements a bunch of methods and traits which are typically
expected from a byte array newtype
(NOTE: some of the methods and trait implementations IMO are a bit
redundant, but I decided to maintain them all to not change too much
stuff in this PR)

It also introduces two (generic) typical consumers of `CryptoBytes`:
`PublicBytes` and `SignatureBytes`.

```rust
pub struct PublicTag;
pub PublicBytes<const N: usize, CryptoTag> = CryptoBytes<N, (PublicTag, CryptoTag)>;

pub struct SignatureTag;
pub SignatureBytes<const N: usize, CryptoTag> = CryptoBytes<N, (SignatureTag, CryptoTag)>;
```

Both of them use a tag to differentiate the two types at a higher level.
Downstream specializations will further specialize using a dedicated
crypto tag. For example in ECDSA:


```rust
pub struct EcdsaTag;

pub type Public = PublicBytes<PUBLIC_KEY_SERIALIZED_SIZE, EcdsaTag>;
pub type Signature = PublicBytes<PUBLIC_KEY_SERIALIZED_SIZE, EcdsaTag>;
```

Overall we have a cleaner and most importantly **consistent** code for
all the types involved

All these details are opaque to the end user which can use `Public` and
`Signature` for the cryptos as before

On top of #3302.

We want the validators to upgrade first before we add changes to the
collation side to send the new variants, which is why this part is
extracted into a separate PR.

The detection of when to send the parent head is based on the core
assignments at the relay parent of the candidate. We probably want to
make it more flexible in the future, but for now, it will work for a
simple use case when a para always has multiple cores assigned to it.

---------

Signed-off-by: Matteo Muraca <[email protected]>
Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: Matteo Muraca <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Juan Ignacio Rios <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

This PR enables the `transaction_unstable_broadcast ` and
`transaction_unstable_stop` RPC API.

Since the API is unstable, we don't need to expose this in the release
notes.

After merging this, we could validate the API in subxt and stabilize it.

Spec PR that stabilizes the API:
https://github.com/paritytech/json-rpc-interface-spec/pull/139



cc @paritytech/subxt-team

Signed-off-by: Alexandru Vasile <[email protected]>

Part of #3326 

cc @Kianenigma @ggwpez @liamaharon

 

polkadot address: 12poSUQPtcF1HUPQGY3zZu2P8emuW9YnsPduA4XG3oCEfJVp

---------

Signed-off-by: Matteo Muraca <[email protected]>

Changes:
- Port the `pov_mode` attribute from the V1 syntax to V2
- Update `pallet-whitelist` and `frame-benchmarking-pallet-pov`

Follow up: also allow this attribute on top-level benchmark modules.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>

Closes: https://github.com/paritytech/polkadot-sdk/issues/3704

Currently the xcm-executor returns an `Unimplemented` error if it
receives any HRMP-related instruction.
What I propose here, which is what we are currently doing in our forked
executor at polimec, is to introduce a trait implemented by the executor
which will handle those instructions.

This way, if parachains want to keep the default behavior, they just use
`()` and it will return unimplemented, but they can also implement their
own logic to establish HRMP channels with other chains in an automated
fashion, without requiring to go through governance.

Our implementation is mentioned in the [polkadot HRMP
docs](https://arc.net/l/quote/hduiivbu

), and it was suggested to us to
submit a PR to add these changes to polkadot-sdk.

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: command-bot <>

Bumps the known_good_semver group with 2 updates:
[serde_yaml](https://github.com/dtolnay/serde-yaml) and
[syn](https://github.com/dtolnay/syn).

Updates `serde_yaml` from 0.9.32 to 0.9.33
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.33</h2>
<ul>
<li>Fix quadratic parse time for YAML containing deeply nested flow
collections (<a
href="https://redirect.github.com/dtolnay/unsafe-libyaml/issues/26">dtolnay/unsafe-libyaml#26</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/f4c9ed92385c827a677dae60c2b5a894e24709f0"><code>f4c9ed9</code></a>
Release 0.9.33</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/b4edaee907373ee69c6389687a35fced63d8addf"><code>b4edaee</code></a>
Pull in yaml_parser_fetch_more_tokens fix from libyaml</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8a5542ced61ae21d0772e504fac01bd1dbfaaa6b"><code>8a5542c</code></a>
Resolve non_local_definitions warning in test</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.32...0.9.33">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.52 to 2.0.53
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.53</h2>
<ul>
<li>Implement Copy, Clone, and ToTokens for syn::parse::Nothing (<a
href="https://redirect.github.com/dtolnay/syn/issues/1597">#1597</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/32dcf8df303c7181d95325f159ffbb1870a73e70"><code>32dcf8d</code></a>
Release 2.0.53</li>
<li><a
href="https://github.com/dtolnay/syn/commit/fd1f2aa9979c557e5b95c85f35b8949b8059153f"><code>fd1f2aa</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1597">#1597</a>
from dtolnay/copyprintnothing</li>
<li><a
href="https://github.com/dtolnay/syn/commit/4f6c0528d63874495ce23d197a898cd63cb04d60"><code>4f6c052</code></a>
Implement ToTokens for syn::parse::Nothing</li>
<li><a
href="https://github.com/dtolnay/syn/commit/3f37543794e5d43952399847a2ecbc1eb39f609f"><code>3f37543</code></a>
Implement Copy for syn::parse::Nothing</li>
<li><a
href="https://github.com/dtolnay/syn/commit/36a412217d5217fab5657ab03ebcf29102d87a64"><code>36a4122</code></a>
Update test suite to nightly-2024-03-16</li>
<li><a
href="https://github.com/dtolnay/syn/commit/bd931069f5adb81168e7e6186ead0663cc605257"><code>bd93106</code></a>
Revert &quot;Temporarily disable nightly testing due to libLLVM link
issue&quot;</li>
<li><a
href="https://github.com/dtolnay/syn/commit/06166a77b7d465b0e4c45e1a2162f15031d7f722"><code>06166a7</code></a>
Update test suite to nightly-2024-03-09</li>
<li><a
href="https://github.com/dtolnay/syn/commit/ed545e75d8fdcab5078789ad25fc0efadc14e59b"><code>ed545e7</code></a>
Work around doc_markdown lint in test_precedence</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7aef1edbba28afe1bb6f9ddc0b5095dcd5135849"><code>7aef1ed</code></a>
Temporarily disable nightly testing due to libLLVM link issue</li>
<li><a
href="https://github.com/dtolnay/syn/commit/556b10bf201264172e4b840f8cf1be38b8d75738"><code>556b10b</code></a>
Update test suite to nightly-2024-03-06</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.52...2.0.53

">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Part of #3326 

@ggwpez @Kianenigma @shawntabrizi



polkadot address: 12poSUQPtcF1HUPQGY3zZu2P8emuW9YnsPduA4XG3oCEfJVp

---------

Signed-off-by: Matteo Muraca <[email protected]>

Bridge zombienet tests: remove unneeded accounts

There is a problem in the way we update `authorithy-discovery` next keys
and because of that nodes that enter the active set would be noticed at
the start of the session they become active, instead of the start of the
previous session as it was intended. This is problematic because:

1. The node itself advertises its addresses on the DHT only when it
notices it should become active on around ~10m loop, so in this case it
would notice after it becomes active.
2. The other nodes won't be able to detect the new nodes addresses at
the beginning of the session, so it won't added them to the reserved
set.

With 1 + 2, we end-up in a situation where the the new node won't be
able to properly connect to its peers because it won't be in its peers
reserved set. Now, the nodes accept by default`MIN_GOSSIP_PEERS: usize =
25` connections to nodes that are not in the reserved set, but given
Kusama size(> 1000 nodes) you could easily have more than`25` new nodes
entering the active set or simply the nodes don't have slots anymore
because, they already have connections to peers not in the active set.

In the end what the node would notice is 0 backing rewards because it
wasn't directly connected to the peers in its backing group.

## Root-cause

The flow is like this:
1. At BAD_SESSION - 1, in `rotate_session` new nodes are added to
QueuedKeys
https://github.com/paritytech/polkadot-sdk/blob/02e1a7f476d7d7c67153e975ab9a1bdc02ffea12/substrate/frame/session/src/lib.rs#L609
```
 <QueuedKeys<T>>::put(queued_amalgamated.clone());
<QueuedChanged<T>>::put(next_changed);
```
2. AuthorityDiscovery::on_new_session is called with `changed` being the
value of `<QueuedChanged<T>>:` at BAD_SESSION - **2** because it was
saved before being updated
https://github.com/paritytech/polkadot-sdk/blob/02e1a7f476d7d7c67153e975ab9a1bdc02ffea12/substrate/frame/session/src/lib.rs#L613
3. At BAD_SESSION - 1, `AuthorityDiscovery::on_new_session` doesn't
updated its next_keys because `changed` was false.
4. For the entire durations of `BAD_SESSION - 1` everyone calling
runtime api `authorities`(should return past, present and future
authorities) won't discover the nodes that should become active .
5. At the beginning of BAD_SESSION, all nodes discover the new nodes are
authorities, but it is already too late because reserved_nodes are
updated only at the beginning of the session by the `gossip-support`.
See above why this bad.

## Fix
Update next keys with the queued_validators at every session, not matter
the value of `changed` this is the same way babe pallet correctly does
it.
https://github.com/paritytech/polkadot-sdk/blob/02e1a7f476d7d7c67153e975ab9a1bdc02ffea12/substrate/frame/babe/src/lib.rs#L655



## Notes

- The issue doesn't reproduce with proof-authorities changes like
`versi` because `changed` would always be true and `AuthorityDiscovery`
correctly updates its next_keys every time.
- Confirmed at session `37651` on kusama that this is exactly what it
happens by looking at blocks with polkadot.js.

## TODO
- [ ] Move versi on proof of stake and properly test before and after
fix to confirm there is no other issue.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Removed the `pallet::getter` macro call from storage type definitions
and added the corresponding implementations directly.
fixes #3330  

polkadot address: 14JzTPPUd8x8phKi8qLxHgNTnTMg6DUukCLXoWprejkaHXPz

---------

Co-authored-by: Bastian Köcher <[email protected]>

This PR removes sp-std crate from substrate/primitives sub-directories.

For now crates that have `pub use` of sp-std or export macros that would
necessitate users of the macros to `extern crate alloc` have been
excluded from this PR.

There should be no breaking changes in this PR.

---------

Co-authored-by: Koute <[email protected]>

Bumps the known_good_semver group with 3 updates:
[log](https://github.com/rust-lang/log),
[syn](https://github.com/dtolnay/syn) and
[clap](https://github.com/clap-rs/clap).

Updates `log` from 0.4.20 to 0.4.21
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rust-lang/log/blob/master/CHANGELOG.md">log's
changelog</a>.</em></p>
<blockquote>
<h2>[0.4.21] - 2024-02-27</h2>
<h2>What's Changed</h2>
<ul>
<li>Minor clippy nits by <a
href="https://github.com/nyurik"><code>@​nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/578">rust-lang/log#578</a></li>
<li>Simplify Display impl by <a
href="https://github.com/nyurik"><code>@​nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/579">rust-lang/log#579</a></li>
<li>Set all crates to 2021 edition by <a
href="https://github.com/nyurik"><code>@​nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/580">rust-lang/log#580</a></li>
<li>Various changes based on review by <a
href="https://github.com/Thomasdezeeuw"><code>@​Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/583">rust-lang/log#583</a></li>
<li>Fix typo in file_static() method doc by <a
href="https://github.com/dimo414"><code>@​dimo414</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/590">rust-lang/log#590</a></li>
<li>Specialize empty key value pairs by <a
href="https://github.com/EFanZh"><code>@​EFanZh</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/576">rust-lang/log#576</a></li>
<li>Fix incorrect lifetime in Value::to_str() by <a
href="https://github.com/peterjoel"><code>@​peterjoel</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/587">rust-lang/log#587</a></li>
<li>Remove some API of the key-value feature by <a
href="https://github.com/Thomasdezeeuw"><code>@​Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/585">rust-lang/log#585</a></li>
<li>Add logcontrol-log and log-reload by <a
href="https://github.com/swsnr"><code>@​swsnr</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/595">rust-lang/log#595</a></li>
<li>Add Serialization section to kv::Value docs by <a
href="https://github.com/Thomasdezeeuw"><code>@​Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/593">rust-lang/log#593</a></li>
<li>Rename Value::to_str to to_cow_str by <a
href="https://github.com/Thomasdezeeuw"><code>@​Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/592">rust-lang/log#592</a></li>
<li>Clarify documentation and simplify initialization of
<code>STATIC_MAX_LEVEL</code> by <a
href="https://github.com/ptosi"><code>@​ptosi</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/594">rust-lang/log#594</a></li>
<li>Update docs to 2021 edition, test by <a
href="https://github.com/nyurik"><code>@​nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/577">rust-lang/log#577</a></li>
<li>Add &quot;alterable_logger&quot; link to README.md by <a
href="https://github.com/brummer-simon"><code>@​brummer-simon</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/589">rust-lang/log#589</a></li>
<li>Normalize line ending by <a
href="https://github.com/EFanZh"><code>@​EFanZh</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/602">rust-lang/log#602</a></li>
<li>Remove <code>ok_or</code> in favor of <code>Option::ok_or</code> by
<a
href="https://github.com/AngelicosPhosphoros"><code>@​AngelicosPhosphoros</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/607">rust-lang/log#607</a></li>
<li>Use <code>Acquire</code> ordering for initialization check by <a
href="https://github.com/AngelicosPhosphoros"><code>@​AngelicosPhosphoros</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/610">rust-lang/log#610</a></li>
<li>Get structured logging API ready for stabilization by <a
href="https://github.com/KodrAus"><code>@​KodrAus</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/613">rust-lang/log#613</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/nyurik"><code>@​nyurik</code></a> made
their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/578">rust-lang/log#578</a></li>
<li><a href="https://github.com/dimo414"><code>@​dimo414</code></a> made
their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/590">rust-lang/log#590</a></li>
<li><a href="https://github.com/peterjoel"><code>@​peterjoel</code></a>
made their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/587">rust-lang/log#587</a></li>
<li><a href="https://github.com/ptosi"><code>@​ptosi</code></a> made
their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/594">rust-lang/log#594</a></li>
<li><a
href="https://github.com/brummer-simon"><code>@​brummer-simon</code></a>
made their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/589">rust-lang/log#589</a></li>
<li><a
href="https://github.com/AngelicosPhosphoros"><code>@​AngelicosPhosphoros</code></a>
made their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/607">rust-lang/log#607</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/rust-lang/log/commit/3ccdc286fef3076747fe18a2a93658ea4d4ae012"><code>3ccdc28</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-lang/log/issues/617">#617</a>
from rust-lang/cargo/0.4.21</li>
<li><a
href="https://github.com/rust-lang/log/commit/6153cb289f0e7b80f00ae07dbe5ee41cf3d3fcb0"><code>6153cb2</code></a>
prepare for 0.4.21 release</li>
<li><a
href="https://github.com/rust-lang/log/commit/f0f74946a4bfb02cfc407795a3499c4b69d7a290"><code>f0f7494</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-lang/log/issues/613">#613</a>
from rust-lang/feat/kv-cleanup</li>
<li><a
href="https://github.com/rust-lang/log/commit/2b220bf3b705f2abc0ee591c7eb17972a979da3a"><code>2b220bf</code></a>
clean up structured logging example</li>
<li><a
href="https://github.com/rust-lang/log/commit/646e9ab9917fb79e44b6b36b8375106a1a09766c"><code>646e9ab</code></a>
use original Visitor name for VisitValue</li>
<li><a
href="https://github.com/rust-lang/log/commit/cf85c38d3519745d60e7b891c4b2025050a8389f"><code>cf85c38</code></a>
add needed subfeatures to kv_unstable</li>
<li><a
href="https://github.com/rust-lang/log/commit/73e953905b970ef765a86bf6cbd69bc2c5e2bac4"><code>73e9539</code></a>
fix up capturing of :err</li>
<li><a
href="https://github.com/rust-lang/log/commit/31bb4b0ff36e458c6bef304a336b71f6342ddcc7"><code>31bb4b0</code></a>
move error macros together</li>
<li><a
href="https://github.com/rust-lang/log/commit/ad917118a5e781d0dd60b3a75ba519ce9839ba70"><code>ad91711</code></a>
support field shorthand in macros</li>
<li><a
href="https://github.com/rust-lang/log/commit/90a347bd836873264a393a35bfd90fe478fadae2"><code>90a347b</code></a>
restore removed APIs as deprecated</li>
<li>Additional commits viewable in <a
href="https://github.com/rust-lang/log/compare/0.4.20...0.4.21">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.50 to 2.0.52
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.52</h2>
<ul>
<li>Add an expression parser that uses match-arm's boundary rules (<a
href="https://redirect.github.com/dtolnay/syn/issues/1593">#1593</a>)</li>
</ul>
<h2>2.0.51</h2>
<ul>
<li>Resolve non_local_definitions warnings in generated code under rustc
1.78-nightly</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/07ede6a6b31adeb3a18899ada1f352f63b3a36b9"><code>07ede6a</code></a>
Release 2.0.52</li>
<li><a
href="https://github.com/dtolnay/syn/commit/acbcfbc8c113fa1603469c9ad329d061ee74662e"><code>acbcfbc</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1593">#1593</a>
from dtolnay/boundary</li>
<li><a
href="https://github.com/dtolnay/syn/commit/4924a993dce23abe65128ac318dd662d1e2ceef2"><code>4924a99</code></a>
Add an expression parser that uses match-arm's boundary rules</li>
<li><a
href="https://github.com/dtolnay/syn/commit/e06122bf2cfd31bd7f70304694477dd292fe7e1e"><code>e06122b</code></a>
Resolve unnecessary_get_then_check clippy lint</li>
<li><a
href="https://github.com/dtolnay/syn/commit/018fc5a6298491525387910cb359a9ec618abe54"><code>018fc5a</code></a>
Update test suite to nightly-2024-02-27</li>
<li><a
href="https://github.com/dtolnay/syn/commit/5e15a9b412cb1e2df481e3470e1be8defaee4495"><code>5e15a9b</code></a>
Release 2.0.51</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7e0d4e1f43a879078595f0a3876484a1920ab8f8"><code>7e0d4e1</code></a>
Resolve non_local_definitions warning in debug impls</li>
<li><a
href="https://github.com/dtolnay/syn/commit/8667ad97c1d4e75ac1bb323fb5c7849269814145"><code>8667ad9</code></a>
Ignore module_name_repetitions pedantic clippy lint in codegen</li>
<li><a
href="https://github.com/dtolnay/syn/commit/1fc32000e25bf8fda7371071073f91e012ddf808"><code>1fc3200</code></a>
Update test suite to nightly-2024-02-26</li>
<li><a
href="https://github.com/dtolnay/syn/commit/07a2065576b27dcf0c104f56379cc446d2f3824b"><code>07a2065</code></a>
Update test suite to nightly-2024-02-23</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.50...2.0.52">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.5.1 to 4.5.3
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.5.3</h2>
<h2>[4.5.3] - 2024-03-15</h2>
<h3>Internal</h3>
<ul>
<li><em>(derive)</em> Update <code>heck</code></li>
</ul>
<h2>v4.5.2</h2>
<h2>[4.5.2] - 2024-03-06</h2>
<h3>Fixes</h3>
<ul>
<li><em>(macros)</em> Silence a warning</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.3] - 2024-03-15</h2>
<h3>Internal</h3>
<ul>
<li><em>(derive)</em> Update <code>heck</code></li>
</ul>
<h2>[4.5.2] - 2024-03-06</h2>
<h3>Fixes</h3>
<ul>
<li><em>(macros)</em> Silence a warning</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/4e07b438584bb8a19e37599d4c5b11797bec5579"><code>4e07b43</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8247c7ddf05d8023729ac180d8e8df260f1da5ff"><code>8247c7d</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/677c52ce0870115845a4c42e204f6c049b81a1e7"><code>677c52c</code></a>
chore: Update <code>heck</code> requirement (<a
href="https://redirect.github.com/clap-rs/clap/issues/5396">#5396</a>)</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f65d421607ba16c3175ffe76a20820f123b6c4cb"><code>f65d421</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/886b2729e419114bf42f1a92c66d346c81aa8f33"><code>886b272</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3ba429752fdb19b7a1c2e151c41d5141ad5b9295"><code>3ba4297</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5386">#5386</a>
from amaanq/static-var-name</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2aea9504c4894b3bddf9cd4d2d6cba889307c157"><code>2aea950</code></a>
fix: Use SCREAMING_SNAKE_CASE for static variable
<code>authors</code></li>
<li><a
href="https://github.com/clap-rs/clap/commit/690f5557d7f25904c31ec9f2a3c3657cbb68c98e"><code>690f555</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5382">#5382</a>
from clap-rs/renovate/pre-commit-action-3.x</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a2aa644368ec19026b16b870ec32dc57b325ba9b"><code>a2aa644</code></a>
chore(deps): update compatible (dev) (<a
href="https://redirect.github.com/clap-rs/clap/issues/5381">#5381</a>)</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c233de53c0cca4281f444cf16d16d161bc9c3cab"><code>c233de5</code></a>
chore(deps): update pre-commit/action action to v3.0.1</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/clap_complete-v4.5.1...v4.5.3

">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Totally removes the `experimental` feature. Closes #3648.

---------

Co-authored-by: Bastian Köcher <[email protected]>

Crowdloan account should burn all funds after a crowd loan got dissolved
to ensure that the account is reaped correctly.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

Fixes #3128.

This introduces a new variant for the collation response from the
collator that includes the parent head data. For now, collators won't
send this new variant. We'll need to change the collator side of the
collator protocol to detect all the cores assigned to a para and send
the parent head data in the case when it's more than 1 core.

- [x] validate approach
- [x] check head data hash

Extracted Benchbuilder enhancements used in
https://github.com/paritytech/polkadot-sdk/pull/3644

 . Might still
require some work to fully support all scenarios when disputing elastic
scaling parachains, but it should be useful in writing elastic scaling
runtime tests.

---------

Signed-off-by: Andrei Sandu <[email protected]>

Step in https://github.com/paritytech/polkadot-sdk/issues/171

This PR removes `as [disambiguation_path]` syntax from `derive_impl`
usage across the polkadot-sdk as introduced in
https://github.com/paritytech/polkadot-sdk/pull/3505

This change includes new bootnodes for Paseo. 

_This is meant to be a silent PR_

Issues addressed in this PR:
- Improve *Penpal* runtime:
- Properly handled received assets. Previously, it treated `(1, Here)`
as the local native currency, whereas it should be treated as a
`ForeignAsset`. This wasn't a great example of standard Parachain
behaviour, as no Parachain treats the system asset as the local
currency.
- Remove `AllowExplicitUnpaidExecutionFrom` the system. Again, this
wasn't a great example of standard Parachain behaviour.
- Move duplicated
`ForeignAssetFeeAsExistentialDepositMultiplierFeeCharger` to
`assets_common` crate.
- Improve emulated tests:
  - Update *Penpal* tests to new runtime.
- To simplify tests, register the reserve transferred, teleported, and
system assets in *Penpal* and *AssetHub* genesis. This saves us from
having to create the assets repeatedly for each test
- Add missing test case:
`reserve_transfer_assets_from_para_to_system_para`.
  - Cleanup.
- Prevent integration tests crates imports from being re-exported, as
they were polluting the `polkadot-sdk` docs.

There is still a test case missing for reserve transfers:
- Reserve transfer of system asset from *Parachain* to *Parachain*
trough *AssetHub*.
- This is not yet possible with `pallet-xcm` due to the reasons
explained in https://github.com/paritytech/polkadot-sdk/pull/3339

---------

Co-authored-by: command-bot <>