lib.rs

// This file is part of Substrate.

// Copyright (C) Parity Technologies (UK) Ltd.
// SPDX-License-Identifier: Apache-2.0

// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// 	http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

//! # Contracts Pallet
//!
//! The Contracts module provides functionality for the runtime to deploy and execute WebAssembly
//! smart-contracts.
//!
//! - [`Config`]
//! - [`Call`]
//!
//! ## Overview
//!
//! This module extends accounts based on the [`frame_support::traits::fungible`] traits to have
//! smart-contract functionality. It can be used with other modules that implement accounts based on
//! the [`frame_support::traits::fungible`] traits. These "smart-contract accounts" have the ability
//! to instantiate smart-contracts and make calls to other contract and non-contract accounts.
//!
//! The smart-contract code is stored once, and later retrievable via its hash.
//! This means that multiple smart-contracts can be instantiated from the same hash, without
//! replicating the code each time.
//!
//! When a smart-contract is called, its associated code is retrieved via the code hash and gets
//! executed. This call can alter the storage entries of the smart-contract account, instantiate new
//! smart-contracts, or call other smart-contracts.
//!
//! Finally, when an account is reaped, its associated code and storage of the smart-contract
//! account will also be deleted.
//!
//! ### Weight
//!
//! Senders must specify a [`Weight`] limit with every call, as all instructions invoked by the
//! smart-contract require weight. Unused weight is refunded after the call, regardless of the
//! execution outcome.
//!
//! If the weight limit is reached, then all calls and state changes (including balance transfers)
//! are only reverted at the current call's contract level. For example, if contract A calls B and B
//! runs out of gas mid-call, then all of B's calls are reverted. Assuming correct error handling by
//! contract A, A's other calls and state changes still persist.
//!
//! ### Notable Scenarios
//!
//! Contract call failures are not always cascading. When failures occur in a sub-call, they do not
//! "bubble up", and the call will only revert at the specific contract level. For example, if
//! contract A calls contract B, and B fails, A can decide how to handle that failure, either
//! proceeding or reverting A's changes.
//!
//! ## Interface
//!
//! ### Dispatchable functions
//!
//! * [`Pallet::instantiate_with_code`] - Deploys a new contract from the supplied Wasm binary,
//! optionally transferring
//! some balance. This instantiates a new smart contract account with the supplied code and
//! calls its constructor to initialize the contract.
//! * [`Pallet::instantiate`] - The same as `instantiate_with_code` but instead of uploading new
//! code an existing `code_hash` is supplied.
//! * [`Pallet::call`] - Makes a call to an account, optionally transferring some balance.
//! * [`Pallet::upload_code`] - Uploads new code without instantiating a contract from it.
//! * [`Pallet::remove_code`] - Removes the stored code and refunds the deposit to its owner. Only
//!   allowed to code owner.
//! * [`Pallet::set_code`] - Changes the code of an existing contract. Only allowed to `Root`
//!   origin.
//! * [`Pallet::migrate`] - Runs migration steps of current multi-block migration in priority,
//!   before [`Hooks::on_idle`][frame_support::traits::Hooks::on_idle] activates.
//!
//! ## Usage
//!
//! * [`ink!`](https://use.ink) is language that enables writing Wasm-based smart contracts in plain
//!   Rust.

#![allow(rustdoc::private_intra_doc_links)]
#![cfg_attr(not(feature = "std"), no_std)]
#![cfg_attr(feature = "runtime-benchmarks", recursion_limit = "1024")]

mod address;
mod benchmarking;
mod exec;
mod gas;
mod primitives;
pub use primitives::*;

mod schedule;
mod storage;
mod wasm;

pub mod chain_extension;
pub mod debug;
pub mod migration;
pub mod test_utils;
pub mod weights;

#[cfg(test)]
mod tests;
use crate::{
	exec::{
		AccountIdOf, ErrorOrigin, ExecError, Executable, Ext, Key, MomentOf, Stack as ExecStack,
	},
	gas::GasMeter,
	storage::{meter::Meter as StorageMeter, ContractInfo, DeletionQueueManager},
	wasm::{CodeInfo, WasmBlob},
};
use codec::{Codec, Decode, Encode, HasCompact, MaxEncodedLen};
use environmental::*;
use frame_support::{
	dispatch::{GetDispatchInfo, Pays, PostDispatchInfo, RawOrigin, WithPostDispatchInfo},
	ensure,
	error::BadOrigin,
	traits::{
		fungible::{Inspect, Mutate, MutateHold},
		ConstU32, Contains, Get, Randomness, Time,
	},
	weights::{Weight, WeightMeter},
	BoundedVec, DefaultNoBound, RuntimeDebugNoBound,
};
use frame_system::{
	ensure_signed,
	pallet_prelude::{BlockNumberFor, OriginFor},
	EventRecord, Pallet as System,
};
use scale_info::TypeInfo;
use smallvec::Array;
use sp_runtime::{
	traits::{Convert, Dispatchable, Hash, Saturating, StaticLookup, Zero},
	DispatchError, RuntimeDebug,
};
use sp_std::{fmt::Debug, prelude::*};

pub use crate::{
	address::{AddressGenerator, DefaultAddressGenerator},
	debug::Tracing,
	exec::Frame,
	migration::{MigrateSequence, Migration, NoopMigration},
	pallet::*,
	schedule::{HostFnWeights, InstructionWeights, Limits, Schedule},
	wasm::Determinism,
};
pub use weights::WeightInfo;

#[cfg(doc)]
pub use crate::wasm::api_doc;

type CodeHash<T> = <T as frame_system::Config>::Hash;
type TrieId = BoundedVec<u8, ConstU32<128>>;
type BalanceOf<T> =
	<<T as Config>::Currency as Inspect<<T as frame_system::Config>::AccountId>>::Balance;
type CodeVec<T> = BoundedVec<u8, <T as Config>::MaxCodeLen>;
type AccountIdLookupOf<T> = <<T as frame_system::Config>::Lookup as StaticLookup>::Source;
type DebugBufferVec<T> = BoundedVec<u8, <T as Config>::MaxDebugBufferLen>;
type EventRecordOf<T> =
	EventRecord<<T as frame_system::Config>::RuntimeEvent, <T as frame_system::Config>::Hash>;

/// The old weight type.
///
/// This is a copy of the [`frame_support::weights::OldWeight`] type since the contracts pallet
/// needs to support it indefinitely.
type OldWeight = u64;

/// Used as a sentinel value when reading and writing contract memory.
///
/// It is usually used to signal `None` to a contract when only a primitive is allowed
/// and we don't want to go through encoding a full Rust type. Using `u32::Max` is a safe
/// sentinel because contracts are never allowed to use such a large amount of resources
/// that this value makes sense for a memory location or length.
const SENTINEL: u32 = u32::MAX;

/// The target that is used for the log output emitted by this crate.
///
/// Hence you can use this target to selectively increase the log level for this crate.
///
/// Example: `RUST_LOG=runtime::contracts=debug my_code --dev`
const LOG_TARGET: &str = "runtime::contracts";

/// Wrapper around `PhantomData` to prevent it being filtered by `scale-info`.
///
/// `scale-info` filters out `PhantomData` fields because usually we are only interested
/// in sized types. However, when trying to communicate **types** as opposed to **values**
/// we want to have those zero sized types be included.
#[derive(Encode, Decode, DefaultNoBound, TypeInfo)]
#[cfg_attr(feature = "std", derive(serde::Serialize, serde::Deserialize))]
pub struct EnvironmentType<T>(PhantomData<T>);

/// List of all runtime configurable types that are used in the communication between
/// `pallet-contracts` and any given contract.
///
/// Since those types are configurable they can vary between