Since `sp-state-machine` and `GenesisConfigBuilderRuntimeCaller` always
set `use_native` to be false.
We should remove this param and make `NativeElseWasmExecutor` behave
like its name.
It could make the above components use the correct execution strategy.

Maybe polkadot do not need about `NativeElseWasmExecutor` anymore. But
it is still needed by other chains and it's useful for debugging.

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Michal Kucharczyk <[email protected]>

This PR removes `NativeElseWasmExecutor` usage from substrate node.
Instead [`WasmExecutor<(sp_io::SubstrateHostFunctions,
sp_statement_store::runtime_api::HostFunctions)>`](https://github.com/paritytech/polkadot-sdk/blob/49a41ab3

/substrate/bin/node/executor/src/lib.rs#L26)
is used.

Related to #2358.

---------

Co-authored-by: Davide Galassi <[email protected]>

This commit introduces a new concept called `NotificationService` which
allows Polkadot protocols to communicate with the underlying
notification protocol implementation directly, without routing events
through `NetworkWorker`. This implies that each protocol has its own
service which it uses to communicate with remote peers and that each
`NotificationService` is unique with respect to the underlying
notification protocol, meaning `NotificationService` for the transaction
protocol can only be used to send and receive transaction-related
notifications.

The `NotificationService` concept introduces two additional benefits:
  * allow protocols to start using custom handshakes
  * allow protocols to accept/reject inbound peers

Previously the validation of inbound connections was solely the
responsibility of `ProtocolController`. This caused issues with light
peers and `SyncingEngine` as `ProtocolController` would accept more
peers than `SyncingEngine` could accept which caused peers to have
differing views of their own states. `SyncingEngine` would reject excess
peers but these rejections were not properly communicated to those peers
causing them to assume that they were accepted.

With `NotificationService`, the local handshake is not sent to remote
peer if peer is rejected which allows it to detect that it was rejected.

This commit also deprecates the use of `NetworkEventStream` for all
notification-related events and going forward only DHT events are
provided through `NetworkEventStream`. If protocols wish to follow each
other's events, they must introduce additional abtractions, as is done
for GRANDPA and transactions protocols by following the syncing protocol
through `SyncEventStream`.

Fixes https://github.com/paritytech/polkadot-sdk/issues/512
Fixes https://github.com/paritytech/polkadot-sdk/issues/514
Fixes https://github.com/paritytech/polkadot-sdk/issues/515
Fixes https://github.com/paritytech/polkadot-sdk/issues/554
Fixes https://github.com/paritytech/polkadot-sdk/issues/556

---
These changes are transferred from
https://github.com/paritytech/substrate/pull/14197 but there are no
functional changes compared to that PR

---------

Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>

Step in https://github.com/paritytech/polkadot-sdk/issues/171

This PR adds `derive_impl` on all `frame_system` config impls for mock
runtimes. The overridden configs are maintained as of now to ensure
minimal changes.

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

This PR removes `#[macro_use]` from the service module in each of the
Substrate nodes in the repo.

* Parachain Template
* Polkadot Parachain
* Minimal Node
* Node Template
* Kitchen Sink Node

IDK why this annotation was present, maybe from when we had the
`new_partial!` macro?

---------

Co-authored-by: Joshy Orndorff <[email protected]>

Fully-qualified path was not being used in benchmark macro for one of
the cases. This PR fixes this and removes the unnecessary import in a
couple of files, which I believe was done to fix this issue.

This PR removes:
-  `New`, `Generate`, `Edit` commands,
- `kitchensink` dependency
from the `chain-spec-builder` util.

New `convert-to-raw`, `update-code` commands were added.

Additionally renames the `runtime` command (which was added in #1256) to
`create`.

---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>

The versioned migrations are already there in pallet nomination-pools:

https://github.com/paritytech/polkadot-sdk/blob/f6ee4781/substrate/frame/nomination-pools/src/migration.rs#L27-L48

Just updating the kitchensink runtime to point to them.

This is also nice because it points the dev to an example of how to use
`VersionedMigration`.

This PR introduces:
- XCM  host functions `xcm_send`, `xcm_execute`
- An Xcm trait into the config. that proxy these functions to to
`pallet_xcm`, or disable their usage by using `()`.
- A mock_network and xcm_test files to test the newly added xcm-related
functions.

---------

Co-authored-by: Keith Yeung <[email protected]>
Co-authored-by: Sasha Gryaznov <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>

Fixes https://github.com/paritytech/polkadot-sdk/issues/1725

This PR adds the following changes:
1. An attribute `pallet::feeless_if` that can be optionally attached to
a call like so:
```rust
#[pallet::feeless_if(|_origin: &OriginFor<T>, something: &u32| -> bool {
	*something == 0
})]
pub fn do_something(origin: OriginFor<T>, something: u32) -> DispatchResult {
     ....
}
```
The closure passed accepts references to arguments as specified in the
call fn. It returns a boolean that denotes the conditions required for
this call to be "feeless".

2. A signed extension `SkipCheckIfFeeless<T: SignedExtension>` that
wraps a transaction payment processor such as
`pallet_transaction_payment::ChargeTransactionPayment`. It checks for
all calls annotated with `pallet::feeless_if` to see if the conditions
are met. If so, the wrapped signed extension is not called, essentially
making the call feeless.

In order to use this, you can simply replace your existing signed
extension that manages transaction payment like so:
```diff
- pallet_transaction_payment::ChargeTransactionPayment<Runtime>,
+ pallet_skip_feeless_payment::SkipCheckIfFeeless<
+	Runtime,
+	pallet_transaction_payment::ChargeTransactionPayment<Runtime>,
+ >,
```

### Todo
- [x] Tests
- [x] Docs
- [x] Prdoc

---------

Co-authored-by: Nikhil Gupta <>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Missing descriptions (47):  

- [x] `cumulus/client/collator/Cargo.toml`
- [x] `cumulus/client/relay-chain-inprocess-interface/Cargo.toml`
- [x] `cumulus/client/cli/Cargo.toml`
- [x] `cumulus/client/service/Cargo.toml`
- [x] `cumulus/client/relay-chain-rpc-interface/Cargo.toml`
- [x] `cumulus/client/relay-chain-interface/Cargo.toml`
- [x] `cumulus/client/relay-chain-minimal-node/Cargo.toml`
- [x] `cumulus/parachains/pallets/parachain-info/Cargo.toml`
- [x] `cumulus/parachains/pallets/ping/Cargo.toml`
- [x] `cumulus/primitives/utility/Cargo.toml`
- [x] `cumulus/primitives/aura/Cargo.toml`
- [x] `cumulus/primitives/core/Cargo.toml`
- [x] `cumulus/primitives/parachain-inherent/Cargo.toml`
- [x] `cumulus/test/relay-sproof-builder/Cargo.toml`
- [x] `cumulus/pallets/xcmp-queue/Cargo.toml`
- [x] `cumulus/pallets/dmp-queue/Cargo.toml`
- [x] `cumulus/pallets/xcm/Cargo.toml`
- [x] `polkadot/erasure-coding/Cargo.toml`
- [x] `polkadot/statement-table/Cargo.toml`
- [x] `polkadot/primitives/Cargo.toml`
- [x] `polkadot/rpc/Cargo.toml`
- [x] `polkadot/node/service/Cargo.toml`
- [x] `polkadot/node/core/parachains-inherent/Cargo.toml`
- [x] `polkadot/node/core/approval-voting/Cargo.toml`
- [x] `polkadot/node/core/dispute-coordinator/Cargo.toml`
- [x] `polkadot/node/core/av-store/Cargo.toml`
- [x] `polkadot/node/core/chain-api/Cargo.toml`
- [x] `polkadot/node/core/prospective-parachains/Cargo.toml`
- [x] `polkadot/node/core/backing/Cargo.toml`
- [x] `polkadot/node/core/provisioner/Cargo.toml`
- [x] `polkadot/node/core/runtime-api/Cargo.toml`
- [x] `polkadot/node/core/bitfield-signing/Cargo.toml`
- [x] `polkadot/node/network/dispute-distribution/Cargo.toml`
- [x] `polkadot/node/network/bridge/Cargo.toml`
- [x] `polkadot/node/network/collator-protocol/Cargo.toml`
- [x] `polkadot/node/network/approval-distribution/Cargo.toml`
- [x] `polkadot/node/network/availability-distribution/Cargo.toml`
- [x] `polkadot/node/network/bitfield-distribution/Cargo.toml`
- [x] `polkadot/node/network/gossip-support/Cargo.toml`
- [x] `polkadot/node/network/availability-recovery/Cargo.toml`
- [x] `polkadot/node/collation-generation/Cargo.toml`
- [x] `polkadot/node/overseer/Cargo.toml`
- [x] `polkadot/runtime/parachains/Cargo.toml`
- [x] `polkadot/runtime/common/slot_range_helper/Cargo.toml`
- [x] `polkadot/runtime/metrics/Cargo.toml`
- [x] `polkadot/xcm/pallet-xcm-benchmarks/Cargo.toml`
- [x] `polkadot/utils/generate-bags/Cargo.toml`
- [x]  `substrate/bin/minimal/runtime/Cargo.toml`

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: alindima <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Marcin S <[email protected]>
Co-authored-by: alindima <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Genesis building in runtime may involve calling some custom host
functions. This PR allows to pass `HostFunctions` into the `ChainSpec`
struct, which in turn are passed to `WasmExecutor`. The `ChainSpec` now
has extended host functions type parameter:
```
pub struct ChainSpec<G, E = NoExtension, EHF = ()>
```
which will be combined with the default set
(`sp_io::SubstrateHostFunctions`) in an instance of `WasmExecutor` used
to build the genesis config.

Fix for #2188

---------

Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

### This PR is a port of this [PR for
substrate](https://github.com/paritytech/substrate/pull/13013) by
@Kianenigma



Add infrastructure needed to have a Pallet::decode_entire_state(), which
makes sure all "typed" storage items defined in the pallet are
decode-able.

This is not enforced in any way at the moment. Teams who wish to
integrate/use this in the try-runtime feature flag should add
frame_support::storage::migration::EnsureStateDecodes as the LAST ITEM
of the runtime's custom migrations, and pass it to frame-executive. This
will make it usable in try-runtime on-runtime-upgrade.

This now catches cases like
https://github.com/paritytech/polkadot-sdk/pull/1969:
```pre
ERROR runtime::executive] failed to decode the value at key: Failed to decode value at key: 0x94eadf0156a8ad5156507773d0471e4ab8ebad86f546c7e0b135a4212aace339. Storage info StorageInfo { pallet_name: Ok("ParaScheduler"), storage_name: Ok("AvailabilityCores"), prefix: Err(Utf8Error { valid_up_to: 0, error_len: Some(1) }), max_values: Some(1), max_size: None }. Raw value: Some("0x0c010101010101")
```

... or:

![image](https://github.com/paritytech/polkadot-sdk/assets/10380170/73052d4f-4da5-4b21-a8dd-b17004e5965e)

Closes #241

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

This PR updates the version of `serde_json` to `1.0.108` throughout the
codebase.

Move peer banning from `ChainSync` to `SyncingEngine`.

This PR prepares chains specs for _native-runtime-free_  world.

This PR has following changes:
- `substrate`:
  - adds support for:
- JSON based `GenesisConfig` to `ChainSpec` allowing interaction with
runtime `GenesisBuilder` API.
- interacting with arbitrary runtime wasm blob to[
`chain-spec-builder`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/bin/utils/chain-spec-builder/src/lib.rs#L46)
command line util,
- removes
[`code`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/frame/system/src/lib.rs#L660)
from `system_pallet`
  - adds `code` to the `ChainSpec`
- deprecates
[`ChainSpec::from_genesis`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/client/chain-spec/src/chain_spec.rs#L263),
but also changes the signature of this method extending it with `code`
argument.
[`ChainSpec::builder()`](https://github.com/paritytech/substrate/blob/20bee680ed098be7239cf7a6b804cd4de267983e/client/chain-spec/src/chain_spec.rs#L507)
should be used instead.
- `polkadot`:
- all references to `RuntimeGenesisConfig` in `node/service` are
removed,
- all
`(kusama|polkadot|versi|rococo|wococo)_(staging|dev)_genesis_config`
functions now return the JSON patch for default runtime `GenesisConfig`,
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,

- `cumulus`:
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,
- _JSON_ patch configuration used instead of `RuntimeGenesisConfig
struct` in all chain specs.
  
---------

Co-authored-by: command-bot <>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Kevin Krone <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

This PR is a follow up to #1661 

- [x] rename the `simple` module to `legacy`
- [x] fix benchmarks to disregard the number of additional fields
- [x] change the storage deposits to charge per encoded byte of the
identity information instance, removing the need for `fn
additional(&self) -> usize` in `IdentityInformationProvider`
- [x] ~add an extrinsic to rejig deposits to account for the change
above~
- [ ] ~ensure through proper configuration that the new byte-based
deposit is always lower than whatever is reserved now~
- [x] remove `IdentityFields` from the `set_fields` extrinsic signature,
as per [this
discussion](https://github.com/paritytech/polkadot-sdk/pull/1661#discussion_r1371703403)

> ensure through proper configuration that the new byte-based deposit is
always lower than whatever is reserved now

Not sure this is needed anymore. If the new deposits are higher than
what is currently on chain and users don't have enough funds to reserve
what is needed, the extrinisc fails and they're basically grandfathered
and frozen until they add more funds and/or make a change to their
identity. This behavior seems fine to me. Original idea
[here](https://github.com/paritytech/polkadot-sdk/pull/1661#issuecomment-1779606319).

> add an extrinsic to rejig deposits to account for the change above

This was initially implemented but now removed from this PR in favor of
the implementation detailed
[here](https://github.com/paritytech/polkadot-sdk/pull/2088).

---------

Signed-off-by: georgepisaltu <[email protected]>
Co-authored-by: joepetrowski <[email protected]>

The `BlockBuilderProvider` was a trait that was defined in
`sc-block-builder`. The trait was implemented for `Client`. This
basically meant that you needed to import `sc-block-builder` any way to
have access to the block builder. So, this trait was not providing any
real value. This pull request is removing the said trait. Instead of the
trait it introduces a builder for creating a `BlockBuilder`. The builder
currently has the quite fabulous name `BlockBuilderBuilder` (I'm open to
any better name 😅

). The rest of the pull request is about
replacing the old trait with the new builder.

# Downstream code changes

If you used `new_block` or `new_block_at` before you now need to switch
it over to the new `BlockBuilderBuilder` pattern:

```rust
// `new` requires a type that implements `CallApiAt`. 
let mut block_builder = BlockBuilderBuilder::new(client)
                // Then you need to specify the hash of the parent block the block will be build on top of
		.on_parent_block(at)
                // The block builder also needs the block number of the parent block. 
                // Here it is fetched from the given `client` using the `HeaderBackend`
                // However, there also exists `with_parent_block_number` for directly passing the number
		.fetch_parent_block_number(client)
		.unwrap()
                // Enable proof recording if required. This call is optional.
		.enable_proof_recording()
                // Pass the digests. This call is optional.
                .with_inherent_digests(digests)
		.build()
		.expect("Creates new block builder");
```

---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: command-bot <>

The check_hardware functions does not give us too much information as to
what is failing, so let's return the list of failed metrics, so that callers can print 
it.

This would make debugging easier, rather than try to guess which
dimension is actually failing.

Signed-off-by: Alexandru Gheorghe <[email protected]>

helps https://github.com/paritytech/polkadot-sdk/issues/439.
closes https://github.com/paritytech/polkadot-sdk/issues/473.

PR link in the older substrate repository:
https://github.com/paritytech/substrate/pull/13498.

# Context
Rewards payout is processed today in a single block and limited to
`MaxNominatorRewardedPerValidator`. This number is currently 512 on both
Kusama and Polkadot.

This PR tries to scale the nominators payout to an unlimited count in a
multi-block fashion. Exposures are stored in pages, with each page
capped to a certain number (`MaxExposurePageSize`). Starting out, this
number would be the same as `MaxNominatorRewardedPerValidator`, but
eventually, this number can be lowered through new runtime upgrades to
limit the rewardeable nominators per dispatched call instruction.

The changes in the PR are backward compatible.

## How payouts would work like after this change
Staking exposes two calls, 1) the existing `payout_stakers` and 2)
`payout_stakers_by_page`.

### payout_stakers
This remains backward compatible with no signature change. If for a
given era a validator has multiple pages, they can call `payout_stakers`
multiple times. The pages are executed in an ascending sequence and the
runtime takes care of preventing double claims.

### payout_stakers_by_page
Very similar to `payout_stakers` but also accepts an extra param
`page_index`. An account can choose to payout rewards only for an
explicitly passed `page_index`.

**Lets look at an example scenario**
Given an active validator on Kusama had 1100 nominators,
`MaxExposurePageSize` set to 512 for Era e. In order to pay out rewards
to all nominators, the caller would need to call `payout_stakers` 3
times.

- `payout_stakers(origin, stash, e)` => will pay the first 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the second set of 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the last set of 76
nominators.
...
- `payout_stakers(origin, stash, e)` => calling it the 4th time would
return an error `InvalidPage`.

The above calls can also be replaced by `payout_stakers_by_page` and
passing a `page_index` explicitly.

## Commission note
Validator commission is paid out in chunks across all the pages where
each commission chunk is proportional to the total stake of the current
page. This implies higher the total stake of a page, higher will be the
commission. If all the pages of a validator's single era are paid out,
the sum of commission paid to the validator across all pages should be
equal to what the commission would have been if we had a non-paged
exposure.

### Migration Note
Strictly speaking, we did not need to bump our storage version since
there is no migration of storage in this PR. But it is still useful to
mark a storage upgrade for the following reasons:

- New storage items are introduced in this PR while some older storage
items are deprecated.
- For the next `HistoryDepth` eras, the exposure would be incrementally
migrated to its corresponding paged storage item.
- Runtimes using staking pallet would strictly need to wait at least
`HistoryDepth` eras with current upgraded version (14) for the migration
to complete. At some era `E` such that `E >
era_at_which_V14_gets_into_effect + HistoryDepth`, we will upgrade to
version X which will remove the deprecated storage items.
In other words, it is a strict requirement that E<sub>x</sub> -
E<sub>14</sub> > `HistoryDepth`, where
E<sub>x</sub> = Era at which deprecated storages are removed from
runtime,
E<sub>14</sub> = Era at which runtime is upgraded to version 14.
- For Polkadot and Kusama, there is a [tracker
ticket](https://github.com/paritytech/polkadot-sdk/issues/433) to clean
up the deprecated storage items.

### Storage Changes

#### Added
- ErasStakersOverview
- ClaimedRewards
- ErasStakersPaged

#### Deprecated
The following can be cleaned up after 84 eras which is tracked
[here](https://github.com/paritytech/polkadot-sdk/issues/433).

- ErasStakers.
- ErasStakersClipped.
- StakingLedger.claimed_rewards, renamed to
StakingLedger.legacy_claimed_rewards.

### Config Changes
- Renamed MaxNominatorRewardedPerValidator to MaxExposurePageSize.

### TODO
- [x] Tracker ticket for cleaning up the old code after 84 eras.
- [x] Add companion.
- [x] Redo benchmarks before merge.
- [x] Add Changelog for pallet_staking.
- [x] Pallet should be configurable to enable/disable paged rewards.
- [x] Commission payouts are distributed across pages.
- [x] Review documentation thoroughly.
- [x] Rename `MaxNominatorRewardedPerValidator` ->
`MaxExposurePageSize`.
- [x] NMap for `ErasStakersPaged`.
- [x] Deprecate ErasStakers.
- [x] Integrity tests.

### Followup issues
[Runtime api for deprecated ErasStakers storage
item](https://github.com/paritytech/polkadot-sdk/issues/426)

---------

Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: command-bot <>

Co-authored-by: Sergejs Kostjucenko <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

# Description

The `trigger_defensive` call has been added to the `root-testing`
pallet. The idea is to have this pallet running on `Rococo/Westend` and
use it to verify if the runtime monitoring works end-to-end.

To accomplish this, `trigger_defensive` dispatches an event when it is
called.

Closes #1953

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [ ] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)

You can remove the "Checklist" section once all have been checked. Thank
you for your contribution!

✄
-----------------------------------------------------------------------------

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Partial https://github.com/paritytech/polkadot-sdk/issues/226

`frame/transaction-storage`: replace `Currency` with `fungible::*`
traits

---------

Signed-off-by: Adrian Catangiu <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>

### Original PR https://github.com/paritytech/substrate/pull/14137

This PR brings in the first version of the "_`frame` umbrella crate_".
This crate is intended to serve two purposes:

1. documentation
2. easier development with frame. Ideally, we want most users to be able
to build a frame-based pallet and runtime using just `frame` (plus
`scale-codec` and `scale-info`).

The crate is not finalized and is not yet intended for external use.
Therefore, the version is set to `0.0.1-dev`, this PR is `silent`, and
the entire crate is hidden behind the `experimental` flag. The main
intention in merging it early on is to be able to iterate on it in the
rest of
[`developer-hub`](https://github.com/paritytech/polkadot-sdk-docs/)
efforts.

The public API of the `frame` crate is at the moment as follows: 

```
pub mod frame
pub use frame::log
pub use frame::pallet
pub mod frame::arithmetic
pub use frame::arithmetic::<<sp_arithmetic::*>>
pub use frame::arithmetic::<<sp_arithmetic::traits::*>>
pub mod frame::deps
pub use frame::deps::codec
pub use frame::deps::frame_executive
pub use frame::deps::frame_support
pub use frame::deps::frame_system
pub use frame::deps::scale_info
pub use frame::deps::sp_api
pub use frame::deps::sp_arithmetic
pub use frame::deps::sp_block_builder
pub use frame::deps::sp_consensus_aura
pub use frame::deps::sp_consensus_grandpa
pub use frame::deps::sp_core
pub use frame::deps::sp_inherents
pub use frame::deps::sp_io
pub use frame::deps::sp_offchain
pub use frame::deps::sp_runtime
pub use frame::deps::sp_std
pub use frame::deps::sp_version
pub mod frame::derive
pub use frame::derive::CloneNoBound
pub use frame::derive::Debug
pub use frame::derive::Debug
pub use frame::derive::DebugNoBound
pub use frame::derive::Decode
pub use frame::derive::Decode
pub use frame::derive::DefaultNoBound
pub use frame::derive::Encode
pub use frame::derive::Encode
pub use frame::derive::EqNoBound
pub use frame::derive::PartialEqNoBound
pub use frame::derive::RuntimeDebug
pub use frame::derive::RuntimeDebugNoBound
pub use frame::derive::TypeInfo
pub use frame::derive::TypeInfo
pub mod frame::prelude
pub use frame::prelude::<<frame_support::pallet_prelude::*>>
pub use frame::prelude::<<frame_system::pallet_prelude::*>>
pub use frame::prelude::<<sp_std::prelude::*>>
pub use frame::prelude::CloneNoBound
pub use frame::prelude::Debug
pub use frame::prelude::Debug
pub use frame::prelude::DebugNoBound
pub use frame::prelude::Decode
pub use frame::prelude::Decode
pub use frame::prelude::DefaultNoBound
pub use frame::prelude::Encode
pub use frame::prelude::Encode
pub use frame::prelude::EqNoBound
pub use frame::prelude::PartialEqNoBound
pub use frame::prelude::RuntimeDebug
pub use frame::prelude::RuntimeDebugNoBound
pub use frame::prelude::TypeInfo
pub use frame::prelude::TypeInfo
pub use frame::prelude::frame_system
pub mod frame::primitives
pub use frame::primitives::BlakeTwo256
pub use frame::primitives::H160
pub use frame::primitives::H256
pub use frame::primitives::H512
pub use frame::primitives::Hash
pub use frame::primitives::Keccak256
pub use frame::primitives::U256
pub use frame::primitives::U512
pub mod frame::runtime
pub mod frame::runtime::apis
pub use frame::runtime::apis::<<frame_system_rpc_runtime_api::*>>
pub use frame::runtime::apis::<<sp_api::*>>
pub use frame::runtime::apis::<<sp_block_builder::*>>
pub use frame::runtime::apis::<<sp_consensus_aura::*>>
pub use frame::runtime::apis::<<sp_consensus_grandpa::*>>
pub use frame::runtime::apis::<<sp_offchain::*>>
pub use frame::runtime::apis::<<sp_session::runtime_api::*>>
pub use frame::runtime::apis::<<sp_transaction_pool::runtime_api::*>>
pub use frame::runtime::apis::ApplyExtrinsicResult
pub use frame::runtime::apis::CheckInherentsResult
pub use frame::runtime::apis::InherentData
pub use frame::runtime::apis::OpaqueMetadata
pub use frame::runtime::apis::impl_runtime_apis
pub use frame::runtime::apis::sp_api
pub mod frame::runtime::prelude
pub use frame::runtime::prelude::<<frame_executive::*>>
pub use frame::runtime::prelude::ConstBool
pub use frame::runtime::prelude::ConstI128
pub use frame::runtime::prelude::ConstI16
pub use frame::runtime::prelude::ConstI32
pub use frame::runtime::prelude::ConstI64
pub use frame::runtime::prelude::ConstI8
pub use frame::runtime::prelude::ConstU128
pub use frame::runtime::prelude::ConstU16
pub use frame::runtime::prelude::ConstU32
pub use frame::runtime::prelude::ConstU64
pub use frame::runtime::prelude::ConstU8
pub use frame::runtime::prelude::NativeVersion
pub use frame::runtime::prelude::RuntimeVersion
pub use frame::runtime::prelude::construct_runtime
pub use frame::runtime::prelude::create_runtime_str
pub use frame::runtime::prelude::derive_impl
pub use frame::runtime::prelude::frame_support
pub use frame::runtime::prelude::ord_parameter_types
pub use frame::runtime::prelude::parameter_types
pub use frame::runtime::prelude::runtime_version
pub mod frame::runtime::testing_prelude
pub use frame::runtime::testing_prelude::BuildStorage
pub use frame::runtime::testing_prelude::Storage
pub mod frame::runtime::types_common
pub type frame::runtime::types_common::AccountId = <<frame::runtime::types_common::Signature as sp_runtime::traits::Verify>::Signer as sp_runtime::traits::IdentifyAccount>::AccountId
pub type frame::runtime::types_common::BlockNumber = u32
pub type frame::runtime::types_common::BlockOf<T, Extra> = sp_runtime::generic::block::Block<sp_runtime::generic::header::Header<frame::runtime::types_common::BlockNumber, sp_runtime::traits::BlakeTwo256>, sp_runtime::generic::unchecked_extrinsic::UncheckedExtrinsic<sp_runtime::multiaddress::MultiAddress<frame::runtime::types_common::AccountId, ()>, <T as frame_system::pallet::Config>::RuntimeCall, frame::runtime::types_common::Signature, Extra>>
pub type frame::runtime::types_common::OpaqueBlock = sp_runtime::generic::block::Block<sp_runtime::generic::header::Header<frame::runtime::types_common::BlockNumber, sp_runtime::traits::BlakeTwo256>, sp_runtime::OpaqueExtrinsic>
pub type frame::runtime::types_common::Signature = sp_runtime::MultiSignature
pub type frame::runtime::types_common::SystemSignedExtensionsOf<T> = (frame_system::extensions::check_non_zero_sender::CheckNonZeroSender<T>, frame_system::extensions::check_spec_version::CheckSpecVersion<T>, frame_system::extensions::check_tx_version::CheckTxVersion<T>, frame_system::extensions::check_genesis::CheckGenesis<T>, frame_system::extensions::check_mortality::CheckMortality<T>, frame_system::extensions::check_nonce::CheckNonce<T>, frame_system::extensions::check_weight::CheckWeight<T>)
pub mod frame::testing_prelude
pub use frame::testing_prelude::<<frame_executive::*>>
pub use frame::testing_prelude::<<frame_system::mocking::*>>
pub use frame::testing_prelude::BuildStorage
pub use frame::testing_prelude::ConstBool
pub use frame::testing_prelude::ConstI128
pub use frame::testing_prelude::ConstI16
pub use frame::testing_prelude::ConstI32
pub use frame::testing_prelude::ConstI64
pub use frame::testing_prelude::ConstI8
pub use frame::testing_prelude::ConstU128
pub use frame::testing_prelude::ConstU16
pub use frame::testing_prelude::ConstU32
pub use frame::testing_prelude::ConstU64
pub use frame::testing_prelude::ConstU8
pub use frame::testing_prelude::NativeVersion
pub use frame::testing_prelude::RuntimeVersion
pub use frame::testing_prelude::Storage
pub use frame::testing_prelude::TestState
pub use frame::testing_prelude::assert_err
pub use frame::testing_prelude::assert_err_ignore_postinfo
pub use frame::testing_prelude::assert_error_encoded_size
pub use frame::testing_prelude::assert_noop
pub use frame::testing_prelude::assert_ok
pub use frame::testing_prelude::assert_storage_noop
pub use frame::testing_prelude::construct_runtime
pub use frame::testing_prelude::create_runtime_str
pub use frame::testing_prelude::derive_impl
pub use frame::testing_prelude::frame_support
pub use frame::testing_prelude::frame_system
pub use frame::testing_prelude::if_std
pub use frame::testing_prelude::ord_parameter_types
pub use frame::testing_prelude::parameter_types
pub use frame::testing_prelude::runtime_version
pub use frame::testing_prelude::storage_alias
pub mod frame::traits
pub use frame::traits::<<frame_support::traits::*>>
pub use frame::traits::<<sp_runtime::traits::*>>
```

---

The road to full stabilization is

- [ ] https://github.com/paritytech/polkadot-sdk/issues/127
- [ ] have a more intentional version bump, as opposed to the current bi
weekly force-major-bump
- [ ] revise the internal API of `frame`, especially what goes into the
`prelude`s.
- [ ] migrate all internal pallets and runtime to use `frame`

---------

Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

# Description

- What does this PR do?

While working with `pallet_nfts` through `nonfungibles_v2` traits
`Inspect, Mutate`, I found out that once you have set the collection
attribute with `<Nfts as Mutate>::set_collection_attribute()`, it's not
possible to read it with `<Nfts as Inspect>::collection_attribute()`
since they use different `namespace` values. When setting the attribute,
`AttributeNamespace::Pallet` is used, while
`AttributeNamespace::CollectionOwner` is used when reading.

more context:
https://github.com/freeverseio/laos/issues/7#issuecomment-1766137370

This PR makes `item` an optional parameter in
`Inspect::system_attribute()`, to be able to read collection attributes.

- Why are these changes needed?

To be able to read collection level attributes when reading attributes
of the collection. It will be possible to read collection attributes by
passing `None` for `item`

- How were these changes implemented and what do they affect?

`NftsApi` is also affected and `NftsApi::system_attribute()` now accepts
optional `item` parameter.

## Breaking change

Because of the change in the `NftsApi::system_attribute()` method's
`item` param, parachains who integrated the `NftsApi` need to update
their API code and frontend integrations accordingly. AssetHubs are
unaffected since the NftsApi wasn't released on those parachains yet.

Adds a config file that allows to run `zepter` without any arguments in
the workspace to address all issues.
A secondary workflow for the CI is provided as `zepter run check`. Both
the formatting and linting are now in one check for efficiancy.

The latest version also detects some more things that `featalign` was
already showing.

Error message [in the
CI](https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/3916205)
now looks like this:
```pre
...
crate 'test-parachains' (/Users/vados/Documents/work/polkadot-sdk/polkadot/parachain/test-parachains/Cargo.toml)
  feature 'std'
    must propagate to:
      parity-scale-codec
Found 55 issues (run with --fix to fix).
Error: Command 'lint propagate-feature' failed with exit code 1

Polkadot-SDK uses the Zepter CLI to detect abnormalities in the feature configuration.
It looks like one more more checks failed; please check the console output. You can try to automatically address them by running `zepter`.
Otherwise please ask directly in the Merge Request, GitHub Discussions or on Matrix Chat, thank you.

For more information, see:
  - https://github.com/paritytech/polkadot-sdk/issues/1831
  - https://github.com/ggwpez/zepter
```

TODO:
- [x] Check that CI fails correctly

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

Fixes #179 

# Description

This PR makes the structure containing identity information used in
`pallet-identity` generic through the pallet `Config`. Additionally, the
old structure is now available in a separate module called `simple`
(pending rename) and is compatible with the new interface.

Another change in this PR is that while the `additional` field in
`IdentityInfo` stays for backwards compatibility reasons, the associated
costs are stil present in the pallet through the `additional` function
in the `IdentityInformationProvider` interface. This function is marked
as deprecated as it is only a temporary solution to the backwards
compatibility problem we had. In short, we could have removed the
additional fields in the struct and done a migration, but we chose to
wait and do it off-chain through the genesis of the system parachain.
After we move the identity pallet to the parachain, additional fields
will be migrated into the existing fields and the `additional` key-value
store will be removed. Until that happens, this interface will provide
the necessary information to properly account for the associated costs.

Additionally, this PR fixes an unrelated issue; the `IdentityField` enum
used to represent the fields as bitflags couldn't store more than 8
fields, even though it was marked as `#[repr(u64)]`. This was because of
the `derive` implementation of `TypeInfo`, which assumed `u8` semantics.
The custom implementation of this trait in
https://github.com/paritytech/polkadot-sdk/commit/0105cc03


fixes the issue.

---------

Signed-off-by: georgepisaltu <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: joe petrowski <[email protected]>

closes https://github.com/paritytech/polkadot-sdk/issues/1882

## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.

This requires: https://github.com/paritytech/scale-info/pull/197

---------

Co-authored-by: Francisco Aguirre <[email protected]>

Changes:
- Add missing crate to the workspace
- Remove versions from local dependency links

Maybe it is finally worth it to add this scrip to the CI to find these
things earlier:
[check-deps.py](https://github.com/ggwpez/substrate-scripts/blob/master/import-runtime-repos/check-deps.py).

@paritytech/ci what would be the best location for that check?  
It takes only a second to run, so maybe we can squeeze it into one of
the existing checks?
Otherwise creating a new GH workflow feels a bit wasteful... maybe i can
group it with https://github.com/paritytech/polkadot-sdk/pull/1831

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

See #1453.

Co-authored-by: Bastian Köcher <[email protected]>

See #1345, <https://github.com/paritytech/substrate/pull/14207>.

This adds all the necessary mixnet components, and puts them together in
the "kitchen-sink" node/runtime. The components added are:

- A pallet (`frame/mixnet`). This is responsible for determining the
current mixnet session and phase, and the mixnodes to use in each
session. It provides a function that validators can call to register a
mixnode for the next session. The logic of this pallet is very similar
to that of the `im-online` pallet.
- A service (`client/mixnet`). This implements the core mixnet logic,
building on the `mixnet` crate. The service communicates with other
nodes using notifications sent over the "mixnet" protocol.
- An RPC interface. This currently only supports sending transactions
over the mixnet.

---------

Co-authored-by: David Emett <[email protected]>
Co-authored-by: Javier Viola <[email protected]>

### Summary 

This PR introduces new dispatchables to the treasury pallet, allowing
spends of various asset types. The enhanced features of the treasury
pallet, in conjunction with the asset-rate pallet, are set up and
enabled for Westend and Rococo.

### Westend and Rococo runtimes.

Polkadot/Kusams/Rococo Treasury can accept proposals for `spends` of
various asset kinds by specifying the asset's location and ID.

#### Treasury Instance New Dispatchables:
- `spend(AssetKind, AssetBalance, Beneficiary, Option<ValidFrom>)` -
propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

in this context, the `AssetKind` parameter contains the asset's location
and it's corresponding `asset_id`, for example:
`USDT` on `AssetHub`,
``` rust
location = MultiLocation(0, X1(Parachain(1000)))
asset_id = MultiLocation(0, X2(PalletInstance(50), GeneralIndex(1984)))
```

the `Beneficiary` parameter is a `MultiLocation` in the context of the
asset's location, for example
``` rust
// the Fellowship salary pallet's location / account
FellowshipSalaryPallet = MultiLocation(1, X2(Parachain(1001), PalletInstance(64)))
// or custom `AccountId`
Alice = MultiLocation(0, AccountId32(network: None, id: [1,...]))
```

the `AssetBalance` represents the amount of the `AssetKind` to be
transferred to the `Beneficiary`. For permission checks, the asset
amount is converted to the native amount and compared against the
maximum spendable amount determined by the commanding spend origin.

the `spend` dispatchable allows for batching spends with different
`ValidFrom` arguments, enabling milestone-based spending. If the
expectations tied to an approved spend are not met, it is possible to
void the spend later using the `void_spend` dispatchable.

Asset Rate Pallet provides the conversion rate from the `AssetKind` to
the native balance.

#### Asset Rate Instance Dispatchables:
- `create(AssetKind, Rate)` - initialize a conversion rate to the native
balance for the given asset
- `update(AssetKind, Rate)` - update the conversion rate to the native
balance for the given asset
- `remove(AssetKind)` - remove an existing conversion rate to the native
balance for the given asset

the pallet's dispatchables can be executed by the Root or Treasurer
origins.

### Treasury Pallet

Treasury Pallet can accept proposals for `spends` of various asset kinds
and pay them out through the implementation of the `Pay` trait.

New Dispatchables:
- `spend(Config::AssetKind, AssetBalance, Config::Beneficiary,
Option<ValidFrom>)` - propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout;
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

The parameters' types of the `spend` dispatchable exposed via the
pallet's `Config` and allows to propose and accept a spend of a certain
amount.

An approved spend can be claimed via the `payout` within the
`Config::SpendPeriod`. Clients provide an implementation of the `Pay`
trait which can pay an asset of the `AssetKind` to the `Beneficiary` in
`AssetBalance` units.

The implementation of the Pay trait might not have an immediate final
payment status, for example if implemented over `XCM` and the actual
transfer happens on a remote chain.

The `check_status` dispatchable can be executed to update the spend's
payment state and retry the `payout` if the payment has failed.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: command-bot <>

Bumps the known_good_semver group with 1 update:
[clap](https://github.com/clap-rs/clap).

<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.6</h2>
<h2>[4.4.6] - 2023-09-28</h2>
<h3>Internal</h3>
<ul>
<li>Upgrade <code>anstream</code></li>
</ul>
<h2>v4.4.5</h2>
<h2>[4.4.5] - 2023-09-25</h2>
<h3>Fixes</h3>
<ul>
<li><em>(parser)</em> When inferring subcommand <code>name</code> or
<code>long_flag</code>, allow ambiguous-looking matches that
unambiguously map back to the same command</li>
<li><em>(parser)</em> When inferring subcommand <code>long_flag</code>,
don't panic</li>
<li><em>(assert)</em> Clarify what action is causing a positional that
doesn't set values which is especially useful for derive users</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.6] - 2023-09-28</h2>
<h3>Internal</h3>
<ul>
<li>Upgrade <code>anstream</code></li>
</ul>
<h2>[4.4.5] - 2023-09-25</h2>
<h3>Fixes</h3>
<ul>
<li><em>(parser)</em> When inferring subcommand <code>name</code> or
<code>long_flag</code>, allow ambiguous-looking matches that
unambiguously map back to the same command</li>
<li><em>(parser)</em> When inferring subcommand <code>long_flag</code>,
don't panic</li>
<li><em>(assert)</em> Clarify what action is causing a positional that
doesn't set values which is especially useful for derive users</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/39f5e807af1c08acedbf7343ce9ec379a4308636"><code>39f5e80</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a5cb6bb988bbacb02e8cf98b6156c860d0801e08"><code>a5cb6bb</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/418c0017a654e9859adfa9b051815f20e4583e31"><code>418c001</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5146">#5146</a>
from epage/update</li>
<li><a
href="https://github.com/clap-rs/clap/commit/485b957c4b90aa010276f813dbd429e1071f8fd9"><code>485b957</code></a>
chore: Upgrade anstream</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a1af8d9ad8f81eb2d71203b50c370a78ce3ec9f3"><code>a1af8d9</code></a>
chore: Update from '_rust/main'</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ac51f0925003597dec21529538597dbd7872d1ac"><code>ac51f09</code></a>
chore(ci): Normalize json5 syntax</li>
<li><a
href="https://github.com/clap-rs/clap/commit/86c29dea384c7392a2b682fa0150f52c0f4c7f00"><code>86c29de</code></a>
chore(ci): Updaet Renovate schema</li>
<li><a
href="https://github.com/clap-rs/clap/commit/204552890d316ec9ae0b21f85298ba1d5d0786f8"><code>2045528</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/55d223001682bc668f5e4db91afd5e76c2a36597"><code>55d2230</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/492ee03b325ff98c7702295e024576b52b71358d"><code>492ee03</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5140">#5140</a>
from epage/dyn</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.4...v4.4.6">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.4&new-version=4.4.6)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

closes https://github.com/paritytech/polkadot-sdk/issues/158.
partially addresses
https://github.com/paritytech/polkadot-sdk/issues/226.

Instead of fragile calculation of current balance by looking at `free
balance - ED`, Nomination Pool now freezes ED in the pool reward account
to restrict an account from going below minimum balance. This also has a
nice side effect that if ED changes, we know how much is the imbalance
in ED frozen in the pool and the current required ED. A pool operator
can diligently top up the pool with the deficit in ED or vice versa,
withdraw the excess they transferred to the pool.

## Notable changes
- New call `adjust_pool_deposit`: Allows to top up the deficit or
withdraw the excess deposited funds to the pool.
- Uses Fungible trait (instead of Currency trait). Since NP was not
doing any locking/reserving previously, no migration is needed for this.
- One time migration of freezing ED from each of the existing pools (not
very PoV friendly but fine for relay chain).

Last week we experienced a governance attack.
Surprisingly, there was no upper limit on the tip amount.

Due to the mechanism of pallet-fragment-election, the council members
will be refreshed immediately. Attacker is easy to control the council
and give a large tip amount.

This PR implements [`GenesisBuilder`
API](https://github.com/paritytech/polkadot-sdk/blob/a414ea75

/substrate/primitives/genesis-builder/src/lib.rs#L38)
for all the runtimes in polkadot repo.

Step towards: paritytech/polkadot-sdk#25

---------

Co-authored-by: ordian <[email protected]>