Skip to content
  1. Mar 18, 2024
    • Alexandru Gheorghe's avatar
      Fix kusama validators getting 0 backing rewards the first session they enter the active set (#3722) · 8d0cd4ff
      Alexandru Gheorghe authored 
      There is a problem in the way we update `authorithy-discovery` next keys
and because of that nodes that enter the active set would be noticed at
the start of the session they become active, instead of the start of the
previous session as it was intended. This is problematic because:

1. The node itself advertises its addresses on the DHT only when it
notices it should become active on around ~10m loop, so in this case it
would notice after it becomes active.
2. The other nodes won't be able to detect the new nodes addresses at
the beginning of the session, so it won't added them to the reserved
set.

With 1 + 2, we end-up in a situation where the the new node won't be
able to properly connect to its peers because it won't be in its peers
reserved set. Now, the nodes accept by default`MIN_GOSSIP_PEERS: usize =
25` connections to nodes that are not in the reserved set, but given
Kusama size(> 1000 nodes) you could easily have more than`25` new nodes
entering the active set or simply the nodes don't have slots anymore
because, they already have connections to peers not in the active set.

In the end what the node would notice is 0 backing rewards because it
wasn't directly connected to the peers in its backing group.

## Root-cause

The flow is like this:
1. At BAD_SESSION - 1, in `rotate_session` new nodes are added to
QueuedKeys
https://github.com/paritytech/polkadot-sdk/blob/02e1a7f476d7d7c67153e975ab9a1bdc02ffea12/substrate/frame/session/src/lib.rs#L609
```
 <QueuedKeys<T>>::put(queued_amalgamated.clone());
<QueuedChanged<T>>::put(next_changed);
```
2. AuthorityDiscovery::on_new_session is called with `changed` being the
value of `<QueuedChanged<T>>:` at BAD_SESSION - **2** because it was
saved before being updated
https://github.com/paritytech/polkadot-sdk/blob/02e1a7f476d7d7c67153e975ab9a1bdc02ffea12/substrate/frame/session/src/lib.rs#L613
3. At BAD_SESSION - 1, `AuthorityDiscovery::on_new_session` doesn't
updated its next_keys because `changed` was false.
4. For the entire durations of `BAD_SESSION - 1` everyone calling
runtime api `authorities`(should return past, present and future
authorities) won't discover the nodes that should become active .
5. At the beginning of BAD_SESSION, all nodes discover the new nodes are
authorities, but it is already too late because reserved_nodes are
updated only at the beginning of the session by the `gossip-support`.
See above why this bad.

## Fix
Update next keys with the queued_validators at every session, not matter
the value of `changed` this is the same way babe pallet correctly does
it.
https://github.com/paritytech/polkadot-sdk/blob/02e1a7f476d7d7c67153e975ab9a1bdc02ffea12/substrate/frame/babe/src/lib.rs#L655



## Notes

- The issue doesn't reproduce with proof-authorities changes like
`versi` because `changed` would always be true and `AuthorityDiscovery`
correctly updates its next_keys every time.
- Confirmed at session `37651` on kusama that this is exactly what it
happens by looking at blocks with polkadot.js.

## TODO
- [ ] Move versi on proof of stake and properly test before and after
fix to confirm there is no other issue.

---------

Signed-off-by: default avatarAlexandru Gheorghe <[email protected]>
Co-authored-by: default avatarBastian Köcher <[email protected]>
      8d0cd4ff
    • K Gunjan's avatar
      Pallet AURA: remove pallet::getter macro and write the corresponding code (#3350) · 816c072a
      K Gunjan authored 
      

Removed the `pallet::getter` macro call from storage type definitions
and added the corresponding implementations directly.
fixes #3330  

polkadot address: 14JzTPPUd8x8phKi8qLxHgNTnTMg6DUukCLXoWprejkaHXPz

---------

Co-authored-by: default avatarBastian Köcher <[email protected]>
      816c072a
    • Squirrel's avatar
      sp-std removal from substrate/primitives (#3274) · 1b5f4243
      Squirrel authored 
      

This PR removes sp-std crate from substrate/primitives sub-directories.

For now crates that have `pub use` of sp-std or export macros that would
necessitate users of the macros to `extern crate alloc` have been
excluded from this PR.

There should be no breaking changes in this PR.

---------

Co-authored-by: default avatarKoute <[email protected]>
      1b5f4243
  3. Mar 17, 2024
  5. Mar 15, 2024
  7. Mar 14, 2024
    • Gonçalo Pestana's avatar
      Staking ledger bonding fixes (#3639) · 606664e1
      Gonçalo Pestana authored 
      Currently, the staking logic does not prevent a controller from becoming
a stash of *another* ledger (introduced by [removing this
check](https://github.com/paritytech/polkadot-sdk/pull/1484/files#diff-3aa6ceab5aa4e0ab2ed73a7245e0f5b42e0832d8ca5b1ed85d7b2a52fb196524L850)).
Given that the remaining of the code expects that never happens, bonding
a ledger with a stash that is a controller of another ledger may lead to
data inconsistencies and data losses in bonded ledgers. For more
detailed explanation of this issue:
https://hackmd.io/@gpestana/HJoBm2tqo/%2FTPdi28H7Qc2mNUqLSMn15w

In a nutshell, when fetching a ledger with a given controller, we may be
end up getting the wrong ledger which can lead to unexpected ledger
states.

This PR also ensures that `set_controller` does not lead to data
inconsistencies in the staking ledger and bonded storage in the case
when a controller of a stash is a stash of *another* ledger. and
improves the staking `try-runtime` checks to catch potential issues with
the storage preemptively.

In summary, there are two important cases here:

1. **"Sane" double bonded ledger**

When a controller of a ledger is a stash of *another* ledger. In this
case, we have:

```
> Bonded(stash, controller)
(A, B)  // stash A with controller B
(B, C) // B is also a stash of another ledger
(C, D)

> Ledger(controller)
Ledger(B) = L_a (stash = A)
Ledger(C) = L_b (stash = B)
Ledger(D) = L_c (stash = C)
```

In this case, the ledgers can be mutated and all operations are OK.
However, we should not allow `set_controller` to be called if it means
it results in a "corrupt" double bonded ledger (see below).

3. **"Corrupt" double bonded ledger**

```
> Bonded(stash, controller)
(A, B)  // stash A with controller B
(B, B)
(C, D)
```
In this case, B is a stash and controller AND is corrupted, since B is
responsible for 2 ledgers which is not correct and will lead to
inconsistent states. Thus, in this case, in this PR we are preventing
these ledgers from mutating (i.e. operations like bonding extra etc)
until the ledger is brought back to a consistent state.

--- 

**Changes**:
- Checks if stash is already a controller when calling `Call::bond`
(fixes the regression introduced by [removing this
check](https://github.com/paritytech/polkadot-sdk/pull/1484/files#diff-3aa6ceab5aa4e0ab2ed73a7245e0f5b42e0832d8ca5b1ed85d7b2a52fb196524L850));
- Ensures that all fetching ledgers from storage are done through the
`StakingLedger` API;
- Ensures that -- when fetching a ledger from storage using the
`StakingLedger` API --, a `Error::BadState` is returned if the ledger
bonding is in a bad state. This prevents bad ledgers from mutating (e.g.
`bond_extra`, `set_controller`, etc) its state and avoid further data
inconsistencies.
- Prevents stashes which are controllers or another ledger from calling
`set_controller`, since that may lead to a bad state.
- Adds further try-state runtime checks that check if there are ledgers
in a bad state based on their bonded metadata.

Related to https://github.com/paritytech/polkadot-sdk/issues/3245



---------

Co-authored-by: default avatarKian Paimani <[email protected]>
Co-authored-by: default avatarkianenigma <[email protected]>
      606664e1
  9. Mar 13, 2024
    • georgepisaltu's avatar
      Revert "FRAME: Create `TransactionExtension` as a replacement for... · bbd51ce8
      georgepisaltu authored 
      Revert "FRAME: Create `TransactionExtension` as a replacement for `SignedExtension` (#2280)" (#3665)

This PR reverts #2280 which introduced `TransactionExtension` to replace
`SignedExtension`.

As a result of the discussion
[here](https://github.com/paritytech/polkadot-sdk/pull/3623#issuecomment-1986789700

),
the changes will be reverted for now with plans to reintroduce the
concept in the future.

---------

Signed-off-by: default avatargeorgepisaltu <[email protected]>
      bbd51ce8
    • Alexandru Vasile's avatar
      authority-discovery: Add log for debugging DHT authority records (#3668) · 60ac5a72
      Alexandru Vasile authored 
      

This PR adds a debug log for displaying all the public addresses that
will later be advertised in the DHT record of the authority. The
Authority DHT record will contain the address ++ `/p2p/peerID` (if not
already present).

This log enables us to check if different nodes will advertise in the
DHT record of the authority the same IP address, however with different
peer IDs.

Signed-off-by: default avatarAlexandru Vasile <[email protected]>
      60ac5a72
    • gupnik's avatar
      Construct Runtime v2 (#1378) · 82f3c3e2
      gupnik authored 
      Moved from https://github.com/paritytech/substrate/pull/14788

----

Fixes https://github.com/paritytech/polkadot-sdk/issues/232

This PR introduces outer-macro approach for `construct_runtime` as
discussed in the linked issue. It looks like the following:
```rust
#[frame_support::runtime]
mod runtime {
	#[runtime::runtime]
        #[runtime::derive(
		RuntimeCall,
		RuntimeEvent,
		RuntimeError,
		RuntimeOrigin,
		RuntimeFreezeReason,
		RuntimeHoldReason,
		RuntimeSlashReason,
		RuntimeLockId,
                RuntimeTask,
	)]
	pub struct Runtime;

	#[runtime::pallet_index(0)]
	pub type System = frame_system;

	#[runtime::pallet_index(1)]
	pub type Timestamp = pallet_timestamp;

	#[runtime::pallet_index(2)]
	pub type Aura = pallet_aura;

	#[runtime::pallet_index(3)]
	pub type Grandpa = pallet_grandpa;

	#[runtime::pallet_index(4)]
	pub type Balances = pallet_balances;

	#[runtime::pallet_index(5)]
	pub type TransactionPayment = pallet_transaction_payment;

	#[runtime::pallet_index(6)]
	pub type Sudo = pallet_sudo;

	// Include the custom logic from the pallet-template in the runtime.
	#[runtime::pallet_index(7)]
	pub type TemplateModule = pallet_template;
}
```

## Features
- `#[runtime::runtime]` attached to a struct defines the main runtime
- `#[runtime::derive]` attached to this struct defines the types
generated by runtime
- `#[runtime::pallet_index]` must be attached to a pallet to define its
index
- `#[runtime::disable_call]` can be optionally attached to a pallet to
disable its calls
- `#[runtime::disable_unsigned]` can be optionally attached to a pallet
to disable unsigned calls
- A pallet instance can be defined as `TemplateModule:
pallet_template<Instance>`
- An optional attribute can be defined as
`#[frame_support::runtime(legacy_ordering)]` to ensure that the order of
hooks is same as the order of pallets (and not based on the
pallet_index). This is to support legacy runtimes and should be avoided
for new ones.

## Todo
- [x] Update the latest syntax in kitchensink and tests
- [x] Update UI tests
- [x] Docs

## Extension
- Abstract away the Executive similar to
https://github.com/paritytech/substrate/pull/14742


- Optionally avoid the need to specify all runtime types (TBD)

---------

Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
Co-authored-by: Nikhil Gupta <>
      82f3c3e2
  11. Mar 12, 2024
  13. Mar 11, 2024
  15. Mar 10, 2024
  17. Mar 09, 2024
  19. Mar 08, 2024
  21. Mar 07, 2024
  23. Mar 06, 2024
  25. Mar 05, 2024