- Jan 31, 2024
-
-
Branislav Kontur authored
[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657) I started this investigation/issue based on @liamaharon question [here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499). ## Problem The `pallet_balances` integrity test should correctly detect that the runtime has correct distinct `HoldReasons` variant count. I assume the same situation exists for RuntimeFreezeReason. It is not a critical problem, if we set `MaxHolds` with a sufficiently large value, everything should be ok. However, in this case, the integrity_test check becomes less useful. **Situation for "any" runtime:** - `HoldReason` enums from different pallets: ```rust /// from pallet_nis #[pallet::composite_enum] pub enum HoldReason { NftReceipt, } /// from pallet_preimage #[pallet::composite_enum] pub enum HoldReason { Preimage, } // from pallet_state-trie-migration #[pallet::composite_enum] pub enum HoldReason { SlashForContinueMigrate, SlashForMigrateCustomTop, SlashForMigrateCustomChild, } ``` - generated `RuntimeHoldReason` enum looks like: ```rust pub enum RuntimeHoldReason { #[codec(index = 32u8)] Preimage(pallet_preimage::HoldReason), #[codec(index = 38u8)] Nis(pallet_nis::HoldReason), #[codec(index = 42u8)] StateTrieMigration(pallet_state_trie_migration::HoldReason), } ``` - composite enum `RuntimeHoldReason` variant count is detected as `3` - we set `type MaxHolds = ConstU32<3>` - `pallet_balances::integrity_test` is ok with `3`(at least 3) However, the real problem can occur in a live runtime where some functionality might stop working. This is due to a total of 5 distinct hold reasons (for pallets with multi-instance support, it is even more), and not all of them can be used because of an incorrect `MaxHolds`, which is deemed acceptable according to the `integrity_test`: ``` // pseudo-code - if we try to call all of these: T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(), &nft_owner, deposit)?; // With `type MaxHolds = ConstU32<3>` these two will fail T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(), &nft_owner, deposit)?; ``` ## Solutions A macro `#[pallet::*]` expansion is extended of `VariantCount` implementation for the `#[pallet::composite_enum]` enum type. This expansion generates the `VariantCount` implementation for pallets' `HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants must be plain enum values without fields to ensure a deterministic count. The composite runtime enum, `RuntimeHoldReason` and `RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum of pallets' enum `VariantCount::VARIANT_COUNT`: ```rust #[frame_support::pallet(dev_mode)] mod module_single_instance { #[pallet::composite_enum] pub enum HoldReason { ModuleSingleInstanceReason1, ModuleSingleInstanceReason2, } ... } #[frame_support::pallet(dev_mode)] mod module_multi_instance { #[pallet::composite_enum] pub enum HoldReason<I: 'static = ()> { ModuleMultiInstanceReason1, ModuleMultiInstanceReason2, ModuleMultiInstanceReason3, } ... } impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount for RuntimeHoldReason { const VARIANT_COUNT: u32 = 0 + module_single_instance::HoldReason::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT; } ``` In addition, `MaxHolds` is removed (as suggested [here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573)) from `pallet_balances`, and its `Holds` are now bounded to `RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let the runtime specify `MaxHolds`. ## For reviewers Relevant changes can be found here: - `substrate/frame/support/procedural/src/lib.rs` - `substrate/frame/support/procedural/src/pallet/parse/composite.rs` - `substrate/frame/support/procedural/src/pallet/expand/composite.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs` - `substrate/frame/support/src/traits/misc.rs` And the rest of the files is just about removed `MaxHolds` from `pallet_balances` ## Next steps Do the same for `MaxFreezes` https://github.com/paritytech/polkadot-sdk/issues/2997. --------- Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
gupnik <[email protected]>
-
- Jan 27, 2024
-
-
Gonçalo Pestana authored
This PR removes current default for `RewardDestination`, which may cause confusion since a ledger should not have a default reward destination: either it has a reward destination, or something is wrong. It also changes the `Payee`'s reward destination in storage from `ValueQuery` to `OptionQuery`. In addition, it adds a `try_state` check to make sure each bonded ledger have a valid reward destination. Closes https://github.com/paritytech/polkadot-sdk/issues/2063 --------- Co-authored-by: command-bot <> Co-authored-by:Ross Bulat <[email protected]>
-
- Jan 26, 2024
-
-
Liam Aharon authoredRelated https://github.com/paritytech/polkadot-sdk/issues/3032 --- Using https://github.com/liamaharon/cargo-workspace-version-tools/ `cargo run -- sync --path ../polkadot-sdk` --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
-
- Jan 18, 2024
-
-
Gonçalo Pestana authored
A bonded ledger fetched with the `StakingLedger` implementation exposes a method `ledger.controller()` that returns the controller of the ledger. However, that controller is computed and stored under the `ledger.controller` field on the fly - i.e when the ledger is fetched from storage using the `StakingLedger::get` method. The controller field is never stored in storage. This PR add a few more tests checks and improves the ledger try-state checks to make sure these invariants hold true. --------- Co-authored-by: command-bot <> Co-authored-by:
Kian Paimani <[email protected]>
-
- Jan 10, 2024
-
-
dependabot[bot] authored
Bumps [lycheeverse/lychee-action](https://github.com/lycheeverse/lychee-action) from 2ac9f030ccdea0033e2510a23a67da2a2da98492 to fdea7032675810093199f485fe075f057cc37b3e. <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/lycheeverse/lychee-action/commit/fdea7032675810093199f485fe075f057cc37b3e"><code>fdea703</code></a> Update secure git hash for 1.9.0</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/22134d37a1fff6c2974df9c92a7c7e1e86a08f9c"><code>22134d3</code></a> Bump version to 1.9.0</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/ebd95ebde89b46eaf3567432efb0b52bad2187d7"><code>ebd95eb</code></a> Update to latest lychee 0.14.0</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/37d79d3b6eda9990480a57eed21c847792dec37a"><code>37d79d3</code></a> Add integration tests for absolute output path and <code>--dump</code> (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/218">#218</a>)</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/57219e4f1d23b32484889db3dbd73f6b814c9bfa"><code>57219e4</code></a> Add integration test for custom output paths (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/1309">#1309</a>) (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/217">#217</a>)</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/a4282891d5805c0d9df0c0d524e2e95a3b0d1ac5"><code>a428289</code></a> fix: cleanup if statement (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/215">#215</a>)</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/ef8c8f32c278e9eed290c6e6c96748f16b6cd335"><code>ef8c8f3</code></a> Add documentation on using the <code>--base</code> param when testing local files (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/211">#211</a>)</li> <li>See full diff in <a href="https://github.com/lycheeverse/lychee-action/compare/2ac9f030ccdea0033e2510a23a67da2a2da98492...fdea7032675810093199f485fe075f057cc37b3e">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> --------- Signed-off-by:
dependabot[bot] <[email protected]> Signed-off-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by:
PG Herveou <[email protected]>
-
- Jan 08, 2024
-
-
dependabot[bot] authored
Bumps [proc-macro-crate](https://github.com/bkchr/proc-macro-crate) from 2.0.1 to 3.0.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/bkchr/proc-macro-crate/releases">proc-macro-crate's releases</a>.</em></p> <blockquote> <h2>v3.0.0</h2> <h2>What's Changed</h2> <ul> <li>Release 3.0.0 by <a href="https://github.com/bkchr"><code>@bkchr</code></a> in <a href="https://redirect.github.com/bkchr/proc-macro-crate/pull/47">bkchr/proc-macro-crate#47</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/bkchr/proc-macro-crate/compare/v2.0.1...v3.0.0">https://github.com/bkchr/proc-macro-crate/compare/v2.0.1...v3.0.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/bkchr/proc-macro-crate/commit/c9671b5f8c307c50aab61e2352450a620d236d8b"><code>c9671b5</code></a> Merge pull request <a href="https://redirect.github.com/bkchr/proc-macro-crate/issues/47">#47</a> from bkchr/bkchrr-release-3.0.0</li> <li><a href="https://github.com/bkchr/proc-macro-crate/commit/e1a5af33e5a573c878441e38ec991fa23a1b4065"><code>e1a5af3</code></a> Bump Rust CI version</li> <li><a href="https://github.com/bkchr/proc-macro-crate/commit/71c28e2a2592a9dc85afbdb4bc346a0296999eed"><code>71c28e2</code></a> Release 3.0.0</li> <li>See full diff in <a href="https://github.com/bkchr/proc-macro-crate/compare/v2.0.1...v3.0.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Jan 07, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 4 updates: [serde](https://github.com/serde-rs/serde), [serde_json](https://github.com/serde-rs/json), [clap](https://github.com/clap-rs/clap) and [syn](https://github.com/dtolnay/syn). Updates `serde` from 1.0.194 to 1.0.195 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.195</h2> <ul> <li>Prevent remote definitions of tuple struct or tuple variant from triggering dead_code warning (<a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a> Release 1.0.195</li> <li><a href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a> from dtolnay/deadremote</li> <li><a href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a> Revert "Add FIXME to fix dead_code warning when using serde(remote)"</li> <li><a href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a> Fix new dead_code warning in tuple struct and tuple variant remote defs</li> <li><a href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a> Add FIXME to fix dead_code warning when using serde(remote)</li> <li><a href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a> Work around dead_code warning in tests</li> <li><a href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a> from serde-rs/exhaustive</li> <li><a href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a> Fill in omitted patterns for GenericArguments match</li> <li><a href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.110 to 1.0.111 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.111</h2> <ul> <li>Improve floating point parsing performance on loongarch64 (<a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>, thanks <a href="https://github.com/heiher"><code>@heiher</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a> Release 1.0.111</li> <li><a href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a> from heiher/limb-64-la64</li> <li><a href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a> Set limb width to 64 for loongarch64</li> <li>See full diff in <a href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.12 to 4.4.13 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.13</h2> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a> docs: Correct link to StructOpt migration guide</li> <li><a href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a> from Manishearth/safety-docs</li> <li><a href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a> Correct safety docs</li> <li><a href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a> from henry-hsieh/fix-nosort</li> <li><a href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a> fix: Skip nosort option below bash 4.4</li> <li><a href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a> from clap-rs/renovate/actions-setup-python-5.x</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.47 to 2.0.48 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.48</h2> <ul> <li>Improve error message on unexpected token after <code>else</code> (<a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a> Release 2.0.48</li> <li><a href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a> from dtolnay/elseblock</li> <li><a href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a> Fix error message on unexpected token after 'else'</li> <li><a href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a> from dtolnay/exhaustive</li> <li><a href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Jan 04, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 4 updates: [serde](https://github.com/serde-rs/serde), [serde_json](https://github.com/serde-rs/json), [clap](https://github.com/clap-rs/clap) and [serde_yaml](https://github.com/dtolnay/serde-yaml). Updates `serde` from 1.0.193 to 1.0.194 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.194</h2> <ul> <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper such as sccache</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a> Release 1.0.194</li> <li><a href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a> from dtolnay/optionifletelse</li> <li><a href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a> Remove option_if_let_else clippy suppression</li> <li><a href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a> Work around doc_link_with_quotes pedantic clippy lint</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.108 to 1.0.110 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.109</h2> <ul> <li>Documentation improvements</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a> Release 1.0.110</li> <li><a href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a> Release 1.0.109</li> <li><a href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a> from serde-rs/doccfg</li> <li><a href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a> Restore doc cfg on re-exports</li> <li><a href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a> from dtolnay/hashtest</li> <li><a href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a> Eliminate hash closure in favor of calling hash_one directly</li> <li><a href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a> Use BuildHasher::hash_one</li> <li><a href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a> Use random hasher state for number hashing test</li> <li><a href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a> Delete trace_macros! functionality from test</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.11 to 4.4.12 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.12</h2> <h2>[4.4.12] - 2023-12-28</h2> <h3>Performance</h3> <ul> <li>Only ask <code>TypedValueParser</code> for possible values if needed</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.12] - 2023-12-28</h2> <h3>Performance</h3> <ul> <li>Only ask <code>TypedValueParser</code> for possible values if needed</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a> from vermiculus/sa/avoid-pv-expansion-in-help</li> <li><a href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a> perf: Avoid retrieving possible_values unless used</li> <li><a href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a> test: Update snapshots</li> <li><a href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a> docs(complete): Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a> docs(complete): Polish API reference for dynamic</li> <li><a href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a> from epage/docsrs</li> <li><a href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a> docs: Include more content on docs.rs</li> <li>See full diff in <a href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare view</a></li> </ul> </details> <br /> Updates `serde_yaml` from 0.9.29 to 0.9.30 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's releases</a>.</em></p> <blockquote> <h2>0.9.30</h2> <ul> <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper such as sccache</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a> Release 0.9.30</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a> from dtolnay/optionifletelse</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a> Remove option_if_let_else clippy suppression</li> <li>See full diff in <a href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Dec 28, 2023
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 2 updates: [syn](https://github.com/dtolnay/syn) and [serde_yaml](https://github.com/dtolnay/serde-yaml). Updates `syn` from 2.0.41 to 2.0.43 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.43</h2> <ul> <li>Insert trailing comma if not already present when printing a 1-tuple in pattern position (<a href="https://redirect.github.com/dtolnay/syn/issues/1553">#1553</a>)</li> </ul> <h2>2.0.42</h2> <ul> <li>Documentation improvements</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/95ee05214030f936b8db3ee295188d5dc2c89621"><code>95ee052</code></a> Release 2.0.43</li> <li><a href="https://github.com/dtolnay/syn/commit/7383e81b1ab6f9983692ebd9d6caa54aeff8fb85"><code>7383e81</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1559">#1559</a> from dtolnay/pattuple</li> <li><a href="https://github.com/dtolnay/syn/commit/712fde5a6fce0e7bee3615ab5c7545ce442bf034"><code>712fde5</code></a> Fix ToTokens for PatTuple to insert trailing comma</li> <li><a href="https://github.com/dtolnay/syn/commit/ed9b94e3395cffb33db4254439e23dbc3a2e9e43"><code>ed9b94e</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1558">#1558</a> from dtolnay/tupletests</li> <li><a href="https://github.com/dtolnay/syn/commit/ec8517b33c137c48c38b74ba5be21815763a50f5"><code>ec8517b</code></a> Add tuple comma tests</li> <li><a href="https://github.com/dtolnay/syn/commit/3cf16c76bdbe4e16261a167592a77edab853c6aa"><code>3cf16c7</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1557">#1557</a> from dtolnay/snapshotparsequote</li> <li><a href="https://github.com/dtolnay/syn/commit/553549ff12358a6ad95baaed2601a9dab541d693"><code>553549f</code></a> Generalize snapshot parsing to types that do not implement Parse</li> <li><a href="https://github.com/dtolnay/syn/commit/f9ad833e4a77c61003861f4e14d16b10b9708f9e"><code>f9ad833</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1556">#1556</a> from dtolnay/punctuatedsnapshot</li> <li><a href="https://github.com/dtolnay/syn/commit/131b40ba2904ec8755bb34466f369072dc34d588"><code>131b40b</code></a> Debug impl for punctuated::Pairs superseded by Punctuated</li> <li><a href="https://github.com/dtolnay/syn/commit/3f12d652a8871955a7e27e0369933288bc387dd5"><code>3f12d65</code></a> Include punctuation tokens in snapshot tests containing Punctuated</li> <li>Additional commits viewable in <a href="https://github.com/dtolnay/syn/compare/2.0.41...2.0.43">compare view</a></li> </ul> </details> <br /> Updates `serde_yaml` from 0.9.27 to 0.9.29 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's releases</a>.</em></p> <blockquote> <h2>0.9.29</h2> <ul> <li>Turn on <code>deny(unsafe_op_in_unsafe_fn)</code> lint</li> </ul> <h2>0.9.28</h2> <ul> <li>Update <code>unsafe-libyaml</code> dependency to pull in unaligned write fix</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/serde-yaml/commit/b957d2b15d7f3d96279997800fa0610b41b8fe00"><code>b957d2b</code></a> Release 0.9.29</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/007fc2d5c1987847a0f1ac95885c56f8e6e5f808"><code>007fc2d</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/serde-yaml/issues/401">#401</a> from dtolnay/unsafeop</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/5bac2475b0017d6a635d641df17165d71b951f0e"><code>5bac247</code></a> Fill in unsafe blocks inside unsafe functions</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/0f6dba18ab8db598c4963e9242afd490ee0202f0"><code>0f6dba1</code></a> Turn on deny(unsafe_op_in_unsafe_fn)</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/1b6e44837f0db0a1c15537311fed3579a7e8c6d2"><code>1b6e448</code></a> Release 0.9.28</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/ec1a3145d7b6b809f7b3aa2d9dcd7db30f0588d4"><code>ec1a314</code></a> Force unsafe-libyaml version that contains unaligned write fix</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/a6b2dc075a6eb1bed0d927df7b7ac2bb288f3bb4"><code>a6b2dc0</code></a> Update name of blocks_in_if_conditions clippy lint</li> <li>See full diff in <a href="https://github.com/dtolnay/serde-yaml/compare/0.9.27...0.9.29">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Dec 20, 2023
-
-
Dónal Murray authored
Many clippy lints usually enforced by `-Dcomplexity` and `-Dcorrectness` are not caught by CI as they are gated by `features`, like `runtime-benchmarks`, while the clippy CI job runs with only the default features for all targets. This PR also adds a CI step to run clippy with `--all-features` to ensure the code quality is maintained behind feature gates from now on. To improve local development, clippy lints are downgraded to warnings, but they still will result in an error at CI due to the `-Dwarnings` rustflag. --------- Co-authored-by:Liam Aharon <[email protected]>
-
- Dec 18, 2023
-
-
Branislav Kontur authored
This PR contains just a few clippy fixes and nits, which are, however, relaxed by workspace clippy settings here: https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506 --------- Co-authored-by:
Dmitry Sinyavin <[email protected]> Co-authored-by:
ordian <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
-
- Dec 14, 2023
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 1 update: [syn](https://github.com/dtolnay/syn). Updates `syn` from 2.0.40 to 2.0.41 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.41</h2> <ul> <li>Support parsing syn::Field in <code>parse_quote!</code> (<a href="https://redirect.github.com/dtolnay/syn/issues/1548">#1548</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/63b17012ab20ff72f3e49aaf821719a866b1a352"><code>63b1701</code></a> Release 2.0.41</li> <li><a href="https://github.com/dtolnay/syn/commit/920ab7d6a061921d03541d86d7ac8daaf864bb7b"><code>920ab7d</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1548">#1548</a> from dtolnay/parsequotefield</li> <li><a href="https://github.com/dtolnay/syn/commit/5e1592408c3bcda68db10cd054f9d87e9e480f9b"><code>5e15924</code></a> Test parse_quote implementation for Field</li> <li><a href="https://github.com/dtolnay/syn/commit/c268c6793f8a71ac2f3e8ee80201701e4352b407"><code>c268c67</code></a> Support parsing Field in parse_quote</li> <li><a href="https://github.com/dtolnay/syn/commit/2ab0f6ae4b47d133c828d9123e86a50565a95447"><code>2ab0f6a</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1547">#1547</a> from dtolnay/testparsequote</li> <li><a href="https://github.com/dtolnay/syn/commit/46172a41a478920ff23c9e370a5b922fa984829d"><code>46172a4</code></a> Add parse_quote tests</li> <li><a href="https://github.com/dtolnay/syn/commit/0fcdad044f330f4c32e2f3b1230271669d1951ea"><code>0fcdad0</code></a> Support punctuated Pairs iterator in snapshot tests</li> <li><a href="https://github.com/dtolnay/syn/commit/06161ba80283edf6f741dfc86c91f6985297d168"><code>06161ba</code></a> Update test suite to nightly-2023-12-12</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.40...2.0.41">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Dec 13, 2023
-
-
Squirrel authored
We currently use a bit of a hack in `.cargo/config` to make sure that clippy isn't too annoying by specifying the list of lints. There is now a stable way to define lints for a workspace. The only down side is that every crate seems to have to opt into this so there's a *few* files modified in this PR. Dependencies: - [x] PR that upgrades CI to use rust 1.74 is merged. --------- Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
-
- Dec 12, 2023
-
-
Ross Bulat authored
Partially Addresses #2500 Adds a `deprecate_controller_batch` call to the staking pallet that is callable by `Root` and `StakingAdmin`. To be used for controller account deprecation and removed thereafter. Adds `MaxControllersDeprecationBatch` pallet constant that defines max possible deprecations per call. - [x] Add `deprecate_controller_batch` call, and `MaxControllersInDeprecationBatch` constant. - [x] Add tests, benchmark, weights. Tests that weight is only consumed if unique pair. - [x] Adds `StakingAdmin` origin to staking's `AdminOrigin` type in westend runtime. - [x] Determined that worst case 5,900 deprecations does fit into `maxBlock` `proofSize` and `refTime` in both normal and operational thresholds, meaning we can deprecate all controllers for each network in one call. ## Block Weights By querying `consts.system.blockWeights` we can see that the `deprecate_controller_batch` weights fit within the `normal` threshold on Polkadot. #### `controller_deprecation_batch` where i = 5900: #### Ref time: 69,933,325,300 #### Proof size: 21,040,390 ### Polkadot ``` // consts.query.blockWeights maxBlock: { refTime: 2,000,000,000,000 proofSize: 18,446,744,073,709,551,615 } normal: { maxExtrinsic: { refTime: 1,479,873,955,000 proofSize: 13,650,590,614,545,068,195 } maxTotal: { refTime: 1,500,000,000,000 proofSize: 13,835,058,055,282,163,711 } } ``` ### Kusama ``` // consts.query.blockWeights maxBlock: { refTime: 2,000,000,000,000 proofSize: 18,446,744,073,709,551,615 } normal: { maxExtrinsic: { refTime: 1,479,875,294,000 proofSize: 13,650,590,614,545,068,195 } maxTotal: { refTime: 1,500,000,000,000 proofSize: 13,835,058,055,282,163,711 } } ``` --------- Co-authored-by: command-bot <> Co-authored-by:Gonçalo Pestana <[email protected]>
-
- Dec 11, 2023
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 2 updates: [clap](https://github.com/clap-rs/clap) and [syn](https://github.com/dtolnay/syn). Updates `clap` from 4.4.10 to 4.4.11 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.11</h2> <h2>[4.4.11] - 2023-12-04</h2> <h3>Features</h3> <ul> <li>Add <code>Command::mut_group</code></li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.11] - 2023-12-04</h2> <h3>Features</h3> <ul> <li>Add <code>Command::mut_group</code></li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/d092896d61fd73a5467db85eac035a9ce2ddbc60"><code>d092896</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/c76a713f8bd40a54a58e8c1d2300a6792f1b79d5"><code>c76a713</code></a> chore: Update lockfile</li> <li><a href="https://github.com/clap-rs/clap/commit/b99d17bb0b78b667659982252e8973174e93ae7d"><code>b99d17b</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/b47f8da4d857dd653915ce772757d4b996a36477"><code>b47f8da</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5247">#5247</a> from epage/group</li> <li><a href="https://github.com/clap-rs/clap/commit/2e7c9d11a84b5008e2b42b4df323557a31bb0337"><code>2e7c9d1</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5194">#5194</a> from c19/patch-1</li> <li><a href="https://github.com/clap-rs/clap/commit/37917be0b75d5cd667cd37db6ea5c6bac837c674"><code>37917be</code></a> feat: Add Command::mut_group</li> <li><a href="https://github.com/clap-rs/clap/commit/cf7a0272cc1d55d139983d4408e8bedab51338ad"><code>cf7a027</code></a> chore: Update from '_rust/main'</li> <li><a href="https://github.com/clap-rs/clap/commit/8c836eaa9d9279df467991a3b8463d748b515a0a"><code>8c836ea</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/10">#10</a> from epage/renovate/migrate-config</li> <li><a href="https://github.com/clap-rs/clap/commit/598c6244983fb392457f3fbec9badf25fab6d051"><code>598c624</code></a> chore(config): migrate config .github/renovate.json5</li> <li>See full diff in <a href="https://github.com/clap-rs/clap/compare/v4.4.10...v4.4.11">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.39 to 2.0.40 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.40</h2> <ul> <li>Fix some edge cases of handling None-delimited groups in expression parser (<a href="https://redirect.github.com/dtolnay/syn/issues/1539">#1539</a>, <a href="https://redirect.github.com/dtolnay/syn/issues/1541">#1541</a>, <a href="https://redirect.github.com/dtolnay/syn/issues/1542">#1542</a>, <a href="https://redirect.github.com/dtolnay/syn/issues/1543">#1543</a>, <a href="https://redirect.github.com/dtolnay/syn/issues/1544">#1544</a>, <a href="https://redirect.github.com/dtolnay/syn/issues/1545">#1545</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/cf7f40a96a7329fb4215a7a1d8d9e7c93439b169"><code>cf7f40a</code></a> Release 2.0.40</li> <li><a href="https://github.com/dtolnay/syn/commit/1ce8ccf5cd92824d1058019c0ae95b0616f6ac01"><code>1ce8ccf</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1538">#1538</a> from dtolnay/testinvisible</li> <li><a href="https://github.com/dtolnay/syn/commit/d06bff8883e794c0d9d5fe2998210dec113b6eff"><code>d06bff8</code></a> Add test for parsing Delimiter::None in expressions</li> <li><a href="https://github.com/dtolnay/syn/commit/9ec66d42bba0da0041ab6448604b72f673e185f1"><code>9ec66d4</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1545">#1545</a> from dtolnay/groupedlet</li> <li><a href="https://github.com/dtolnay/syn/commit/384621acc640779ee4a8250317c26a42e8ceef90"><code>384621a</code></a> Fix None-delimited let expression in stmt position</li> <li><a href="https://github.com/dtolnay/syn/commit/5325b6d1711c1c9c6787cb6239b472b5f8b5daaf"><code>5325b6d</code></a> Add test of let expr surrounded in None-delimited group</li> <li><a href="https://github.com/dtolnay/syn/commit/0ddfc27cf79573db0b5533c583ff895e9c7f3f72"><code>0ddfc27</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1544">#1544</a> from dtolnay/nonedelimloop</li> <li><a href="https://github.com/dtolnay/syn/commit/9c99b3f62ecebb2ac22f8ed99039934b0a18d0e6"><code>9c99b3f</code></a> Fix stmt boundary after None-delimited group containing loop</li> <li><a href="https://github.com/dtolnay/syn/commit/2781584ea868cce6c9ae750bc442e3b4b2dfd887"><code>2781584</code></a> Add test of None-delimited group containing loop in match arm</li> <li><a href="https://github.com/dtolnay/syn/commit/d33292808432c8530b53c951f2780d7128c4bd0b"><code>d332928</code></a> Simplify token stream construction in Delimiter::None tests</li> <li>Additional commits viewable in <a href="https://github.com/dtolnay/syn/compare/2.0.39...2.0.40">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Dec 08, 2023
-
-
Bastian Köcher authored
-
- Dec 01, 2023
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 1 update: [syn](https://github.com/dtolnay/syn). Updates `syn` from 2.0.38 to 2.0.39 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.39</h2> <ul> <li>Fix parsing of return expression in match guards (<a href="https://redirect.github.com/dtolnay/syn/issues/1528">#1528</a>)</li> <li>Improve error message on labeled loop as value expression for break (<a href="https://redirect.github.com/dtolnay/syn/issues/1531">#1531</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/924217c1734c085ee6cdb5e198d36d610c234313"><code>924217c</code></a> Release 2.0.39</li> <li><a href="https://github.com/dtolnay/syn/commit/95aeeb559866368d8b910d388c8e04b96083666a"><code>95aeeb5</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1531">#1531</a> from dtolnay/breaklabel</li> <li><a href="https://github.com/dtolnay/syn/commit/b88f86fae5c1ac284179181bf7a34549e6d96d7c"><code>b88f86f</code></a> Ignore single_element_loop clippy lint in test</li> <li><a href="https://github.com/dtolnay/syn/commit/a876185366557cb0e0e175c3be48721c8cc0d8e6"><code>a876185</code></a> Improve error on break followed by labeled loop</li> <li><a href="https://github.com/dtolnay/syn/commit/32ab9794d6b75248c1946ae18baab12a46137eb0"><code>32ab979</code></a> Add test of ambiguous label parsing in break</li> <li><a href="https://github.com/dtolnay/syn/commit/6f658f88a213e25b7ac7ec2dc77c537de679b745"><code>6f658f8</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1530">#1530</a> from dtolnay/canbeginexpr</li> <li><a href="https://github.com/dtolnay/syn/commit/20497e1a555812cfe05769b4d8c117c4e0e4edbd"><code>20497e1</code></a> More precise decision to parse expression after return keyword</li> <li><a href="https://github.com/dtolnay/syn/commit/c6a651aa12447d50c22db3189ef38cff90fc267b"><code>c6a651a</code></a> Update name of ExprReturn parse function to match variant name</li> <li><a href="https://github.com/dtolnay/syn/commit/c2745901009f7d65e7b708cd80031642038f765e"><code>c274590</code></a> Indicate that peek argument refers to syn::Ident</li> <li><a href="https://github.com/dtolnay/syn/commit/3e67cb0c660fc906770d212465652bfeb7a75727"><code>3e67cb0</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1529">#1529</a> from dtolnay/up</li> <li>Additional commits viewable in <a href="https://github.com/dtolnay/syn/compare/2.0.38...2.0.39">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
dependabot[bot] authored
Bumps [proc-macro-crate](https://github.com/bkchr/proc-macro-crate) from 1.3.1 to 2.0.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/bkchr/proc-macro-crate/releases">proc-macro-crate's releases</a>.</em></p> <blockquote> <h2>v2.0.0</h2> <h2>What's Changed</h2> <ul> <li>Release 2.0.0 by <a href="https://github.com/bkchr"><code>@bkchr</code></a> in <a href="https://redirect.github.com/bkchr/proc-macro-crate/pull/39">bkchr/proc-macro-crate#39</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0">https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/bkchr/proc-macro-crate/commit/cc100ed2bc1ac9bb81812fd435a43e2ef023f355"><code>cc100ed</code></a> Merge pull request <a href="https://redirect.github.com/bkchr/proc-macro-crate/issues/39">#39</a> from bkchr/bkchr-2.0.0</li> <li><a href="https://github.com/bkchr/proc-macro-crate/commit/39a7c1844fc4d73ef397a7e8d9419f1f3381aa44"><code>39a7c18</code></a> Release 2.0.0</li> <li>See full diff in <a href="https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
Liam Aharon authored
Using taplo, fixes all our broken and inconsistent toml formatting and adds CI to keep them tidy. If people want we can customise the format rules as described here https://taplo.tamasfe.dev/configuration/formatter-options.html @ggwpez , I suggest zepter is used only for checking features are propagated, and leave formatting for taplo to avoid duplicate work and conflicts. TODO - [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet tests instead of deleting the dir --------- Signed-off-by:
-
- Nov 30, 2023
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 2 updates: [serde](https://github.com/serde-rs/serde) and [clap](https://github.com/clap-rs/clap). Updates `serde` from 1.0.188 to 1.0.193 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.193</h2> <ul> <li>Fix field names used for the deserialization of <code>RangeFrom</code> and <code>RangeTo</code> (<a href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>, <a href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>, <a href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>, thanks <a href="https://github.com/emilbonnek"><code>@emilbonnek</code></a>)</li> </ul> <h2>v1.0.192</h2> <ul> <li>Allow internal tag field in untagged variant (<a href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>, thanks <a href="https://github.com/robsdedude"><code>@robsdedude</code></a>)</li> </ul> <h2>v1.0.191</h2> <ul> <li>Documentation improvements</li> </ul> <h2>v1.0.190</h2> <ul> <li>Preserve NaN sign when deserializing f32 from f64 or vice versa (<a href="https://redirect.github.com/serde-rs/serde/issues/2637">#2637</a>)</li> </ul> <h2>v1.0.189</h2> <ul> <li>Fix "cannot infer type" error when internally tagged enum contains untagged variant (<a href="https://redirect.github.com/serde-rs/serde/issues/2613">#2613</a>, thanks <a href="https://github.com/ahl"><code>@ahl</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/44613c7d0190dbb5ecd2d5ec19c636f45b7488cc"><code>44613c7</code></a> Release 1.0.193</li> <li><a href="https://github.com/serde-rs/serde/commit/c706281df3c8d50dba1763f19c856df2746eba6c"><code>c706281</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a> from dtolnay/rangestartend</li> <li><a href="https://github.com/serde-rs/serde/commit/65d75b8fe3105f00ab2e01537d568d4587167582"><code>65d75b8</code></a> Add RangeFrom and RangeTo tests</li> <li><a href="https://github.com/serde-rs/serde/commit/332b0cba40bcbcc7a6b23a9706277c54791a9856"><code>332b0cb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a> from dtolnay/rangestartend</li> <li><a href="https://github.com/serde-rs/serde/commit/8c4af412969086bc8f54fdc2a079d373632e0a03"><code>8c4af41</code></a> Fix more RangeFrom / RangeEnd mixups</li> <li><a href="https://github.com/serde-rs/serde/commit/24a78f071b22ae491eec4127be696ac255b9b5d3"><code>24a78f0</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a> from emilbonnek/fix/range-to-from-de-mixup</li> <li><a href="https://github.com/serde-rs/serde/commit/c91c33436d7aaef7472ebc18b734ddc9b5bd11fa"><code>c91c334</code></a> Fix Range{From,To} deserialize mixup</li> <li><a href="https://github.com/serde-rs/serde/commit/2083f43a287cac8302009fda5bbe41518dd83209"><code>2083f43</code></a> Update ui test suite to nightly-2023-11-19</li> <li><a href="https://github.com/serde-rs/serde/commit/4676abdc9e6bbbddfb33a00ce8d7e81e92f01120"><code>4676abd</code></a> Release 1.0.192</li> <li><a href="https://github.com/serde-rs/serde/commit/35700eb23e21d8cb198ef4a422ddad13b855ce3b"><code>35700eb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a> from robsdedude/fix/2643/allow-tag-field-in-untagged</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/serde/compare/v1.0.188...v1.0.193">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.6 to 4.4.10 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.10</h2> <h2>[4.4.10] - 2023-11-28</h2> <h3>Documentation</h3> <ul> <li>Link out to changelog</li> <li>Cross link derive's attribute reference to derive tutorial</li> </ul> <h2>v4.4.9</h2> <h2>[4.4.9] - 2023-11-27</h2> <h3>Fixes</h3> <ul> <li><em>(help)</em> Show correct <code>Command::about</code> under flattened headings</li> <li><em>(help)</em> Respect <code>hide</code> when flattening subcommands</li> </ul> <h2>v4.4.8</h2> <h2>[4.4.8] - 2023-11-10</h2> <h3>Features</h3> <ul> <li>Add <code>Command::flatten_help</code> to allow <code>git stash -h</code> like help for subcommands</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.10] - 2023-11-28</h2> <h3>Documentation</h3> <ul> <li>Link out to changelog</li> <li>Cross link derive's attribute reference to derive tutorial</li> </ul> <h2>[4.4.9] - 2023-11-27</h2> <h3>Fixes</h3> <ul> <li><em>(help)</em> Show correct <code>Command::about</code> under flattened headings</li> <li><em>(help)</em> Respect <code>hide</code> when flattening subcommands</li> </ul> <h2>[4.4.8] - 2023-11-10</h2> <h3>Features</h3> <ul> <li>Add <code>Command::flatten_help</code> to allow <code>git stash -h</code> like help for subcommands</li> </ul> <h2>[4.4.7] - 2023-10-24</h2> <h3>Performance</h3> <ul> <li>Reduced code size</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/c0a1814d3c1d93c18faaedc95fd251846e47f4fe"><code>c0a1814</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/c83e681e20b05f7e128088f47f8fcfc44e8ea166"><code>c83e681</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/91bcac4ca9d442786f554abeb7b1ed6d7a464a42"><code>91bcac4</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5230">#5230</a> from epage/migrate</li> <li><a href="https://github.com/clap-rs/clap/commit/030d87505d150345ddd425c1df21c034d2ae7748"><code>030d875</code></a> docs: Link out to the changelog at the relevant tag</li> <li><a href="https://github.com/clap-rs/clap/commit/b661a9de04aebd1adaaafdbf7e470f07a8d8a36d"><code>b661a9d</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5229">#5229</a> from epage/derive</li> <li><a href="https://github.com/clap-rs/clap/commit/a08587b00e347492165ded1415bad6ab339e9f0b"><code>a08587b</code></a> docs(derive): Link to tutorial sections for attributes</li> <li><a href="https://github.com/clap-rs/clap/commit/21b671f689bc0b8d790dc8c42902c22822bf6f82"><code>21b671f</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/93ba76dbaaf9136313a4fe2978693cc39fa467dd"><code>93ba76d</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/c1c55b30d853446e2cab78664c0d22c1b77d4dfd"><code>c1c55b3</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5228">#5228</a> from epage/flat</li> <li><a href="https://github.com/clap-rs/clap/commit/b13f6d98622b80ba30e63c2c6e65d218cc8a4de3"><code>b13f6d9</code></a> fix(help): Hide 'help' if only flattened subcommand</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.6...v4.4.10">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Nov 28, 2023
-
-
gupnik authored
Step in https://github.com/paritytech/polkadot-sdk/issues/171 This PR adds `derive_impl` on all `frame_system` config impls for mock runtimes. The overridden configs are maintained as of now to ensure minimal changes. --------- Co-authored-by:
-
- Nov 27, 2023
-
-
Ross Bulat authored
The `chill_other` call is the only staking call that explicitly requires `controller` in its signature. This PR changes the controller arg to be the stash instead, with `StakingLedger` then fetching the controller from storage. This is not a breaking change per se - the call types do not change, but is noteworthy as UIs will now want to pass the stash account into `chill_other` calls, & metadata will reflect this. Note: This is very low impact. `chill_other` has [hardly ever been used](https://polkadot.subscan.io/extrinsic?address=&module=staking&call=chill_other&result=all&signedChecked=signed%20only&startDate=&endDate=&startBlock=&timeType=date&version=9431&endBlock=) on Polkadot - notwithstanding the one called 11 days ago at block 18177457 that was a part of test I did, the last call was made 493 days ago. Only 2 calls have ever been successful. Addresses controller deprecation #2500 --------- Co-authored-by: command-bot <> Co-authored-by:
-
- Nov 24, 2023
-
-
Ankan authored
The FastUnstake pallet tests were previously directly modifying storage items in the pallet-staking to alter exposure. However, due to the introduction of the [new paged exposure feature](https://github.com/paritytech/polkadot-sdk/pull/1189) these tests were not testing against correct storage items. This issue resulted in a bug that I didn't catch, which has been addressed in [this fix](https://github.com/paritytech/polkadot-sdk/pull/2369). This PR introduces a modification to how the pallet-fast-unstake handles exposure. It now utilizes `pallet-staking::EraInfo` to set or mutate Exposures.
-
Gonçalo Pestana authored
This PR converts unsafe math operations to safe in the staking pallet. Closes https://github.com/paritytech/polkadot-sdk/issues/2431 --------- Co-authored-by:Ankan <[email protected]>
-
- Nov 23, 2023
-
-
Ross Bulat authored
Amends some staking pallet docs, and deprecation comment, to adjust to the latest controller deprecation state. Note, do we need the `README.md` file, which is a duplicate of the pallet docs? Docs would be easier to maintain, and less ambiguity for devs to refer to, if we had one source of truth in the generated pallet docs.
-
Liam Aharon authored
CI: Disable runtime upgrade spec name check on Westend Asset Hub and fix Staking pallet migration (#2447) Westend Asset Hub currently failing because the spec name is being changed next runtime upgrade (https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4413125). This also fixes an idempotency issue with a staking pallet migration. Similar issues will be caught automatically now that we've also updated to try-runtime-cli v0.5.0 which checks for idempotency issues. This also enables try-state checks running in the CI.
-
- Nov 22, 2023
-
-
Ross Bulat authored
Deprecates `RewardDestination::Controller` variant. - [x] `RewardDestination::Controller` annotated with `#[deprecated]`. - [x] `Controller` variant is now handled the same way as `Stash` in `payout_stakers`. - [x] `set_payee` errors if `RewardDestination::Controller` is provided. - [x] Added `update_payee` call to lazily migrate `RewardDestination::Controller` `Payee` storage entries to `RewardDestination::Account(controller)` . - [x] `payout_stakers_dead_controller` has been removed from benches & weights - was not used. - [x] Tests no longer use `RewardDestination::Controller`. --------- Co-authored-by: command-bot <> Co-authored-by:
georgepisaltu <[email protected]>
-
- Nov 17, 2023
-
-
Ankan authored
Addresses a bug caused by https://github.com/paritytech/polkadot-sdk/pull/1189. The changes are still not released yet, so would like to push the fix soon so it can go together with the release of the above PR. `fast_unstake` checks if a staker is exposed in an era. However, this fn is still returning whether the staker is exposed based on the old storage item. This PR fixes that by looking in both old and new exposure storages. Also adds some integrity tests for paged exposures.
-
- Nov 04, 2023
-
-
Ankan authored
Should help https://github.com/paritytech/polkadot-sdk/issues/234. Related to https://github.com/paritytech/polkadot-sdk/issues/2020 and https://github.com/paritytech/polkadot-sdk/issues/2108. Refactors and improves running time for try runtime checks for staking pallet. Tested on westend on my M2 pro: running time drops from 90 seconds to 7 seconds.
-
- Nov 01, 2023
-
-
Ankan authored
helps https://github.com/paritytech/polkadot-sdk/issues/439. closes https://github.com/paritytech/polkadot-sdk/issues/473. PR link in the older substrate repository: https://github.com/paritytech/substrate/pull/13498. # Context Rewards payout is processed today in a single block and limited to `MaxNominatorRewardedPerValidator`. This number is currently 512 on both Kusama and Polkadot. This PR tries to scale the nominators payout to an unlimited count in a multi-block fashion. Exposures are stored in pages, with each page capped to a certain number (`MaxExposurePageSize`). Starting out, this number would be the same as `MaxNominatorRewardedPerValidator`, but eventually, this number can be lowered through new runtime upgrades to limit the rewardeable nominators per dispatched call instruction. The changes in the PR are backward compatible. ## How payouts would work like after this change Staking exposes two calls, 1) the existing `payout_stakers` and 2) `payout_stakers_by_page`. ### payout_stakers This remains backward compatible with no signature change. If for a given era a validator has multiple pages, they can call `payout_stakers` multiple times. The pages are executed in an ascending sequence and the runtime takes care of preventing double claims. ### payout_stakers_by_page Very similar to `payout_stakers` but also accepts an extra param `page_index`. An account can choose to payout rewards only for an explicitly passed `page_index`. **Lets look at an example scenario** Given an active validator on Kusama had 1100 nominators, `MaxExposurePageSize` set to 512 for Era e. In order to pay out rewards to all nominators, the caller would need to call `payout_stakers` 3 times. - `payout_stakers(origin, stash, e)` => will pay the first 512 nominators. - `payout_stakers(origin, stash, e)` => will pay the second set of 512 nominators. - `payout_stakers(origin, stash, e)` => will pay the last set of 76 nominators. ... - `payout_stakers(origin, stash, e)` => calling it the 4th time would return an error `InvalidPage`. The above calls can also be replaced by `payout_stakers_by_page` and passing a `page_index` explicitly. ## Commission note Validator commission is paid out in chunks across all the pages where each commission chunk is proportional to the total stake of the current page. This implies higher the total stake of a page, higher will be the commission. If all the pages of a validator's single era are paid out, the sum of commission paid to the validator across all pages should be equal to what the commission would have been if we had a non-paged exposure. ### Migration Note Strictly speaking, we did not need to bump our storage version since there is no migration of storage in this PR. But it is still useful to mark a storage upgrade for the following reasons: - New storage items are introduced in this PR while some older storage items are deprecated. - For the next `HistoryDepth` eras, the exposure would be incrementally migrated to its corresponding paged storage item. - Runtimes using staking pallet would strictly need to wait at least `HistoryDepth` eras with current upgraded version (14) for the migration to complete. At some era `E` such that `E > era_at_which_V14_gets_into_effect + HistoryDepth`, we will upgrade to version X which will remove the deprecated storage items. In other words, it is a strict requirement that E<sub>x</sub> - E<sub>14</sub> > `HistoryDepth`, where E<sub>x</sub> = Era at which deprecated storages are removed from runtime, E<sub>14</sub> = Era at which runtime is upgraded to version 14. - For Polkadot and Kusama, there is a [tracker ticket](https://github.com/paritytech/polkadot-sdk/issues/433) to clean up the deprecated storage items. ### Storage Changes #### Added - ErasStakersOverview - ClaimedRewards - ErasStakersPaged #### Deprecated The following can be cleaned up after 84 eras which is tracked [here](https://github.com/paritytech/polkadot-sdk/issues/433). - ErasStakers. - ErasStakersClipped. - StakingLedger.claimed_rewards, renamed to StakingLedger.legacy_claimed_rewards. ### Config Changes - Renamed MaxNominatorRewardedPerValidator to MaxExposurePageSize. ### TODO - [x] Tracker ticket for cleaning up the old code after 84 eras. - [x] Add companion. - [x] Redo benchmarks before merge. - [x] Add Changelog for pallet_staking. - [x] Pallet should be configurable to enable/disable paged rewards. - [x] Commission payouts are distributed across pages. - [x] Review documentation thoroughly. - [x] Rename `MaxNominatorRewardedPerValidator` -> `MaxExposurePageSize`. - [x] NMap for `ErasStakersPaged`. - [x] Deprecate ErasStakers. - [x] Integrity tests. ### Followup issues [Runtime api for deprecated ErasStakers storage item](https://github.com/paritytech/polkadot-sdk/issues/426) --------- Co-authored-by:
Javier Viola <[email protected]> Co-authored-by:
-
- Oct 24, 2023
-
-
Kian Paimani authored
closes https://github.com/paritytech/polkadot-sdk/issues/1882 ## Breaking Changes This PR introduces a new item to `pallet_balances::Config`: ```diff trait Config { ++ type RuntimeFreezeReasons; } ``` This value is only used to check it against `type MaxFreeze`. A similar check has been added for `MaxHolds` against `RuntimeHoldReasons`, which is already given to `pallet_balances`. In all contexts, you should pass the real `RuntimeFreezeReasons` generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing `()` would also work, but it would imply that the runtime uses no freezes at all. --------- Signed-off-by:
-
- Oct 20, 2023
-
-
Bastian Köcher authored
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to crates.io as someone as squatted `xcm`. The problem with this rename is that the `TypeInfo` includes the crate name which ultimately lands in the metadata. The metadata is consumed by downstream users like `polkadot-js` or people building on top of `polkadot-js`. These people are using the entire `path` to find the type in the type registry. Thus, their code would break as the type path would now be [`staging_xcm`, `VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request fixes this by renaming the path segment `staging_xcm` to `xcm`. This requires: https://github.com/paritytech/scale-info/pull/197 --------- Co-authored-by:Francisco Aguirre <[email protected]>
-
- Oct 17, 2023
-
-
Kian Paimani authored
Just making a few hidden imports cleaner and hidden in docs. --------- Co-authored-by:Keith Yeung <[email protected]>
-
- Oct 15, 2023
-
-
Gonçalo Pestana authored
This PR refactors the staking ledger logic to encapsulate all reads and mutations of `Ledger`, `Bonded`, `Payee` and stake locks within the `StakingLedger` struct implementation. With these changes, all the reads and mutations to the `Ledger`, `Payee` and `Bonded` storage map should be done through the methods exposed by StakingLedger to ensure the data and lock consistency of the operations. The new introduced methods that mutate and read Ledger are: - `ledger.update()`: inserts/updates a staking ledger in storage; updates staking locks accordingly (and ledger.bond(), which is synthatic sugar for ledger.update()) - `ledger.kill()`: removes all Bonded and StakingLedger related data for a given ledger; updates staking locks accordingly; `StakingLedger::get(account)`: queries both the `Bonded` and `Ledger` storages and returns a `Option<StakingLedger>`. The pallet impl exposes fn ledger(account) as synthatic sugar for `StakingLedger::get(account)`. Retrieving a ledger with `StakingLedger::get()` can be done by providing either a stash or controller account. The input must be wrapped in a `StakingAccount` variant (Stash or Controller) which is treated accordingly. This simplifies the caller API but will eventually be deprecated once we completely get rid of the controller account in staking. However, this refactor will help with the work necessary when completely removing the controller. Other goals: - No logical changes have been introduced in this PR; - No breaking changes or updates in wallets required; - No new storage items or need to perform storage migrations; - Centralise the changes to bonds and ledger updates to simplify the OnStakingUpdate updates to the target list (related to https://github.com/paritytech/polkadot-sdk/issues/443) Note: it would be great to prevent or at least raise a warning if `Ledger<T>`, `Payee<T>` and `Bonded<T>` storage types are accessed outside the `StakingLedger` implementation. This PR should not get blocked by that feature, but there's a tracking issue here https://github.com/paritytech/polkadot-sdk/issues/149 Related and step towards https://github.com/paritytech/polkadot-sdk/issues/443
-
- Oct 06, 2023
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 1 update: [syn](https://github.com/dtolnay/syn). <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.38</h2> <ul> <li>Fix <em>"method 'peek' has an incompatible type for trait"</em> error when defining <code>bool</code> as a custom keyword (<a href="https://redirect.github.com/dtolnay/syn/issues/1518">#1518</a>, thanks <a href="https://github.com/Vanille-N"><code>@Vanille-N</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/43632bfb6c78ee1f952645a268ab1ac4af162977"><code>43632bf</code></a> Release 2.0.38</li> <li><a href="https://github.com/dtolnay/syn/commit/abd2c214b44da64a5e420d72919308300eebc23d"><code>abd2c21</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1518">#1518</a> from Vanille-N/master</li> <li><a href="https://github.com/dtolnay/syn/commit/6701e6077e15013ef34b15e3ffdae2657e499d83"><code>6701e60</code></a> Absolute path to <code>bool</code> in <code>custom_punctuation.rs</code></li> <li><a href="https://github.com/dtolnay/syn/commit/7313d242398111423f046386aa0a75548f63d236"><code>7313d24</code></a> Resolve single_match_else pedantic clippy lint in code generator</li> <li><a href="https://github.com/dtolnay/syn/commit/67ab64f3c09e17b23493c7cda498e7edb8830f21"><code>67ab64f</code></a> Include unexpected token in the test failure message</li> <li><a href="https://github.com/dtolnay/syn/commit/137ae33486de3f2652487f8f64436ad1429df496"><code>137ae33</code></a> Check no remaining token after the first literal</li> <li><a href="https://github.com/dtolnay/syn/commit/258e9e8a11d188c1ee1ffb2b069819239999f9ac"><code>258e9e8</code></a> Ignore single_match_else pedantic clippy lint in test</li> <li><a href="https://github.com/dtolnay/syn/commit/92fd50ee8cb52968d9c66fbe6d67638c1f838e26"><code>92fd50e</code></a> Test docs.rs documentation build in CI</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.37...2.0.38">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Oct 01, 2023
-
-
Piet authored
What does this PR do? - Introduced the TotalValueLocked storage for nomination-pools. - introduced a slashing api in mock.rs - additional test for tracking a slashing event towards a pool without sub-pools - migration for the nomination-pools (V6 to V7) with `VersionedMigration` Why are these changes needed? this is the continuation of the work by @Kianenigma in this [PR](https://github.com/paritytech/substrate/pull/13319) How were these changes implemented and what do they affect? - It's an extra StorageValue that's modified whenever funds flow in or out of staking for any of the `bonded_account` of `BondedPools` - The `PoolSlashed`event is now emitted even when no `SubPools` are found Closes https://github.com/paritytech/polkadot-sdk/issues/155 KSM: HHEEgVzcqL3kCXgsxSfJMbsTy8dxoTctuXtpY94n4s8F4pS --------- Co-authored-by:
Ankan <[email protected]> Co-authored-by: command-bot <>
-
- Sep 20, 2023
-
-
dependabot[bot] authored
[//]: # (dependabot-start)
⚠ ️ **Dependabot is rebasing this PR**⚠ ️ Rebasing might not happen immediately, so don't worry if this takes some time. Note: if you make any changes to this PR yourself, they will take precedence over the rebase. --- [//]: # (dependabot-end) Bumps the known_good_semver group with 2 updates: [clap](https://github.com/clap-rs/clap) and [syn](https://github.com/dtolnay/syn). Updates `clap` from 4.4.3 to 4.4.4 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.4</h2> <h2>[4.4.4] - 2023-09-18</h2> <h3>Internal</h3> <ul> <li>Update <code>terminal_size</code> to 0.3</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.4] - 2023-09-18</h2> <h3>Internal</h3> <ul> <li>Update <code>terminal_size</code> to 0.3</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/e6e539660f36487e3521ab6835ef1381a21785a4"><code>e6e5396</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/acbb60c11389d362e3b2d23a7b2a0a0523bd2fa8"><code>acbb60c</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/f09d521450c50f56153f7246489666c71e3b4739"><code>f09d521</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5129">#5129</a> from cgwalters/widen-terminal-size</li> <li><a href="https://github.com/clap-rs/clap/commit/84f99ff979d58e3fe94716144b1800fd81723ed7"><code>84f99ff</code></a> chore(builder): Bump terminal_size to 0.3</li> <li><a href="https://github.com/clap-rs/clap/commit/7f8df272d90afde89e40de086492e1c9f5749897"><code>7f8df27</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5124">#5124</a> from devinherron/master</li> <li><a href="https://github.com/clap-rs/clap/commit/4dff87386a950d8dfa8e89906e9bf54d180d13de"><code>4dff873</code></a> fix(doc): Fix typo in 03_04_subcommands.md</li> <li>See full diff in <a href="https://github.com/clap-rs/clap/compare/v4.4.3...v4.4.4">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.36 to 2.0.37 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.37</h2> <ul> <li>Work around incorrect future compatibility warning in rustc 1.74.0-nightly</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/96810880f3acbb63415cf4684ab42c82edc31e2a"><code>9681088</code></a> Release 2.0.37</li> <li><a href="https://github.com/dtolnay/syn/commit/fbe3bc2ddcee4192f95697a953330d031030f5a1"><code>fbe3bc2</code></a> Work around unknown_lints warning on rustc older than 1.64</li> <li><a href="https://github.com/dtolnay/syn/commit/75cf912e061ef5a1d97c003f4988f43d7639f5a8"><code>75cf912</code></a> Ignore more repr_transparent_external_private_fields</li> <li><a href="https://github.com/dtolnay/syn/commit/299c782439823b868de4aea3682b41d03351d978"><code>299c782</code></a> Ignore false repr_transparent_external_private_fields FCW in generated code</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.36...2.0.37">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Sep 18, 2023
-
-
Ross Bulat authored
Addresses https://github.com/paritytech/polkadot-sdk/issues/129. Returns `Self:payee()` from `make_payout` in a tuple alongside an imbalance & adds it to `Rewarded` event.
-
dependabot[bot] authored
Bumps the known_good_semver group with 1 update: [syn](https://github.com/dtolnay/syn). <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.36</h2> <ul> <li>Restore compatibility with <code>--generate-link-to-definition</code> documentation builds (<a href="https://redirect.github.com/dtolnay/syn/issues/1514">#1514</a>)</li> </ul> <h2>2.0.35</h2> <ul> <li>Make rust-analyzer produce preferred brackets for invocations of <code>Token!</code> macro (<a href="https://redirect.github.com/dtolnay/syn/issues/1510">#1510</a>, <a href="https://redirect.github.com/dtolnay/syn/issues/1512">#1512</a>)</li> </ul> <h2>2.0.34</h2> <ul> <li>Documentation improvements</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/ef6476c76431da488720c8ee3fdfff57a199a848"><code>ef6476c</code></a> Release 2.0.36</li> <li><a href="https://github.com/dtolnay/syn/commit/6ae1a9756a128f18341a4cba56772ee1715a06e2"><code>6ae1a97</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1514">#1514</a> from dtolnay/pubnotdoc</li> <li><a href="https://github.com/dtolnay/syn/commit/7bfef4b2befee954bc002724c8331612fed3d47f"><code>7bfef4b</code></a> Work around doc breakage in generate-link-to-definition mode</li> <li><a href="https://github.com/dtolnay/syn/commit/ce360ff4b1695311dcc569ade1fc9ff1ff6ac4d9"><code>ce360ff</code></a> Release 2.0.35</li> <li><a href="https://github.com/dtolnay/syn/commit/23736bdc48a964286ea032ea5c172574239119ef"><code>23736bd</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1512">#1512</a> from dtolnay/tokendoc</li> <li><a href="https://github.com/dtolnay/syn/commit/6f6b0040d420abfda0b5504dc13b7c76319ebccd"><code>6f6b004</code></a> Improve docs of Token! macro</li> <li><a href="https://github.com/dtolnay/syn/commit/319433e12a0e13d1b549a189ae1ce1d3293a7ea9"><code>319433e</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1510">#1510</a> from ModProg/patch-3</li> <li><a href="https://github.com/dtolnay/syn/commit/975ce0b7c4319166ff0ae5ea839d923410615dae"><code>975ce0b</code></a> Release 2.0.34</li> <li><a href="https://github.com/dtolnay/syn/commit/858e578d1e3aed3d7ac965a59b5044a1ca4eadf2"><code>858e578</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1511">#1511</a> from dtolnay/notdoc</li> <li><a href="https://github.com/dtolnay/syn/commit/1b0d7f807862cb36256848a9f55a81a9aca41976"><code>1b0d7f8</code></a> Add cfg(not(doc)) to doc(hidden) functions</li> <li>Additional commits viewable in <a href="https://github.com/dtolnay/syn/compare/2.0.33...2.0.36">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Sep 15, 2023
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 2 updates: [serde_json](https://github.com/serde-rs/json) and [syn](https://github.com/dtolnay/syn). Updates `serde_json` from 1.0.106 to 1.0.107 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.107</h2> <ul> <li>impl IntoDeserializer for &RawValue (<a href="https://redirect.github.com/serde-rs/json/issues/1071">#1071</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/b6e113f2036c52e994ca805e530ee4ffae791f71"><code>b6e113f</code></a> Release 1.0.107</li> <li><a href="https://github.com/serde-rs/json/commit/00626a0a95b3d4cee8d57709f0acc804c1296716"><code>00626a0</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1073">#1073</a> from dtolnay/rawvalue</li> <li><a href="https://github.com/serde-rs/json/commit/b9d296f87d6081afdd590d5a6006737db961302b"><code>b9d296f</code></a> IntoDeserializer for &RawValue</li> <li><a href="https://github.com/serde-rs/json/commit/4ea34a2566ba82a2e602526d0919d23e88c9e5ef"><code>4ea34a2</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1072">#1072</a> from dtolnay/rawvalue</li> <li><a href="https://github.com/serde-rs/json/commit/fe30766ae5c79bfb670b2de1c5596e6e11e22f8c"><code>fe30766</code></a> Support deserializing from &RawValue</li> <li><a href="https://github.com/serde-rs/json/commit/2c22077f0e2decfda5cdfd5821c5f9547d584b76"><code>2c22077</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1062">#1062</a> from osiewicz/remove_build_rs</li> <li><a href="https://github.com/serde-rs/json/commit/04f7758b6eae935237574b25a1e63cf5e281e19e"><code>04f7758</code></a> fixup! chore: Remove no_btreemap_get_key_value and no_btreemap_remove_entry.</li> <li><a href="https://github.com/serde-rs/json/commit/83bdc5fd4213d94201a3d9ad0f2943da7eba1dd6"><code>83bdc5f</code></a> Omit return keyword in <code>remove_entry</code></li> <li><a href="https://github.com/serde-rs/json/commit/89a274195680d3ea6a2b442ff633b81ccf60bbe4"><code>89a2741</code></a> Revert "Remove limb_width32 and limb_width64 features"</li> <li><a href="https://github.com/serde-rs/json/commit/16e04ceeddfdfad18fb1ae8530695a318fa9bc02"><code>16e04ce</code></a> fixup! Remove limb_width32 and limb_width64 features</li> <li>See full diff in <a href="https://github.com/serde-rs/json/compare/v1.0.106...v1.0.107">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.32 to 2.0.33 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.33</h2> <ul> <li>Special handling for the <code>(/*ERROR*/)</code> placeholder that rustc uses for macros that fail to expand</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/5e3f55e684b7e33424b9f551105463418b196eb4"><code>5e3f55e</code></a> Release 2.0.33</li> <li><a href="https://github.com/dtolnay/syn/commit/3e04809f5218c6d5fb2b09a6c55933e785825c75"><code>3e04809</code></a> Pull in proc-macro2 error placeholder change</li> <li><a href="https://github.com/dtolnay/syn/commit/2cd5608a4c37810bb0947b0c161a20695b3ce487"><code>2cd5608</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1508">#1508</a> from dtolnay/error</li> <li><a href="https://github.com/dtolnay/syn/commit/84cfe09484f6468bc85fb01db11c6a10fcb2d988"><code>84cfe09</code></a> Fall through to 'Unrecognized literal' error</li> <li><a href="https://github.com/dtolnay/syn/commit/a80570c81bf15c9afcf8e2470ab06f60f7a8183d"><code>a80570c</code></a> Parse rustc's representation of macro expansion error</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.32...2.0.33">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
![dependabot[bot]'s avatar](https://secure.gravatar.com/avatar/bd5a8d6c673b738d52b0ac42a110045f3f964b3ebfc1d60ea805af743b1dc0e6?s=80&d=identicon "dependabot[bot]")
