Skip to content
  1. Dec 04, 2023
  3. Dec 01, 2023
  5. Nov 30, 2023
  7. Nov 29, 2023
  9. Nov 28, 2023
  11. Nov 27, 2023
  13. Nov 24, 2023
  15. Nov 23, 2023
  17. Nov 21, 2023
  19. Nov 17, 2023
  21. Nov 16, 2023
  23. Nov 15, 2023
  25. Nov 14, 2023
  27. Nov 13, 2023
    • Adrian Catangiu's avatar
      pallet-xcm: enhance `reserve_transfer_assets` to support remote reserves (#1672) · 18257373
      Adrian Catangiu authored 
      ## Motivation

`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.

While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.

## Solution

This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.

Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.

All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.

#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).

Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055



---------

Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
Co-authored-by: default avatarBranislav Kontur <[email protected]>
      18257373
  29. Nov 10, 2023
    • PG Herveou's avatar
      Contracts: Add XCM traits to interface with contracts (#2086) · 6b7be115
      PG Herveou authored 
      We are introducing a new set of `XcmController` traits (final name yet
to be determined).
These traits are implemented by `pallet-xcm` and allows other pallets,
such as `pallet_contracts`, to rely on these traits instead of tight
coupling them to `pallet-xcm`.

Using only the existing Xcm traits would mean duplicating the logic from
`pallet-xcm` in these other pallets, which we aim to avoid. Our
objective is to ensure that when these APIs are called from
`pallet-contracts`, they produce the exact same outcomes as if called
directly from `pallet-xcm`.

The other benefits is that we can also expose return values to
`pallet-contracts` instead of just calling `pallet-xcm` dispatchable and
getting a `DispatchResult` back.

See traits integration in this PR
https://github.com/paritytech/polkadot-sdk/pull/1248

, where the traits
are used as follow to define and implement `pallet-contracts` Config.
```rs
// Contracts config:
pub trait Config: frame_system::Config {
  // ...

  /// A type that exposes XCM APIs, allowing contracts to interact with other parachains, and
  /// execute XCM programs.
  type Xcm: xcm_executor::traits::Controller<
	  OriginFor<Self>,
	  <Self as frame_system::Config>::RuntimeCall,
	  BlockNumberFor<Self>,
  >;
}

// implementation
impl pallet_contracts::Config for Runtime {
        // ...

	type Xcm = pallet_xcm::Pallet<Self>;
}
```

---------

Co-authored-by: default avatarAlexander Theißen <[email protected]>
Co-authored-by: command-bot <>
      6b7be115
  31. Nov 08, 2023
  33. Nov 07, 2023
  35. Nov 05, 2023
  37. Nov 03, 2023
    • Svyatoslav Nikolsky's avatar
      [testnet] Allow governance to control fees for Rococo <> Westend bridge (#2139) · 0d3c67d9
      Svyatoslav Nikolsky authored 
      Right now governance could only control byte-fee component of Rococo <>
Westend message fees (paid at Asset Hubs). This PR changes it a bit:
1) governance now allowed to control both fee components - byte fee and
base fee;
2) base fee now includes cost of "default" delivery and confirmation
transactions, in addition to `ExportMessage` instruction cost.
      0d3c67d9
  39. Nov 02, 2023
    • Oliver Tale-Yazdi's avatar
      Use `Message Queue` as DMP and XCMP dispatch queue (#1246) · e1c033eb
      Oliver Tale-Yazdi authored 
      (imported from https://github.com/paritytech/cumulus/pull/2157)

## Changes

This MR refactores the XCMP, Parachains System and DMP pallets to use
the [MessageQueue](https://github.com/paritytech/substrate/pull/12485)
for delayed execution of incoming messages. The DMP pallet is entirely
replaced by the MQ and thereby removed. This allows for PoV-bounded
execution and resolves a number of issues that stem from the current
work-around.

All System Parachains adopt this change.  
The most important changes are in `primitives/core/src/lib.rs`,
`parachains/common/src/process_xcm_message.rs`,
`pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs`
and the runtime configs.

### DMP Queue Pallet

The pallet got removed and its logic refactored into parachain-system.
Overweight message management can be done directly through the MQ
pallet.

Final undeployment migrations are provided by
`cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that
can be configured with an aux config trait like:

```rust
parameter_types! {
	pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME;
	pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent;
}

impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime {
	type PalletName = DmpQueuePalletName;
	type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>;
	type DbWeight = <Runtime as frame_system::Config>::DbWeight;
}

// And adding them to your Migrations tuple:
pub type Migrations = (
	...
	cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>,
	cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>,
);
```

### XCMP Queue pallet

Removed all dispatch queue functionality. Incoming XCMP messages are now
either: Immediately handled if they are Signals, enqueued into the MQ
pallet otherwise.

New config items for the XCMP queue pallet:
```rust
/// The actual queue implementation that retains the messages for later processing.
type XcmpQueue: EnqueueMessage<ParaId>;

/// How a XCM over HRMP from a sibling parachain should be processed.
type XcmpProcessor: ProcessMessage<Origin = ParaId>;

/// The maximal number of suspended XCMP channels at the same time.
#[pallet::constant]
type MaxInboundSuspended: Get<u32>;
```

How to configure those:

```rust
// Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since
// the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s.
type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>;

// Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched
// with origin `Junction::Sibling(…)`.
type XcmpProcessor = ProcessFromSibling<
	ProcessXcmMessage<
		AggregateMessageOrigin,
		xcm_executor::XcmExecutor<xcm_config::XcmConfig>,
		RuntimeCall,
	>,
>;

// Not really important what to choose here. Just something larger than the maximal number of channels.
type MaxInboundSuspended = sp_core::ConstU32<1_000>;
```

The `InboundXcmpStatus` storage item was replaced by
`InboundXcmpSuspended` since it now only tracks inbound queue suspension
and no message indices anymore.

Now only sends the most recent channel `Signals`, as all prio ones are
out-dated anyway.

### Parachain System pallet

For `DMP` messages instead of forwarding them to the `DMP` pallet, it
now pushes them to the configured `DmpQueue`. The message processing
which was triggered in `set_validation_data` is now being done by the MQ
pallet `on_initialize`.

XCMP messages are still handed off to the `XcmpMessageHandler`
(XCMP-Queue pallet) - no change here.

New config items for the parachain system pallet:
```rust
/// Queues inbound downward messages for delayed processing. 
///
/// Analogous to the `XcmpQueue` of the XCMP queue pallet.
type DmpQueue: EnqueueMessage<AggregateMessageOrigin>;
``` 

How to configure:
```rust
/// Use the MQ pallet to store DMP messages for delayed processing.
type DmpQueue = MessageQueue;
``` 

## Message Flow

The flow of messages on the parachain side. Messages come in from the
left via the `Validation Data` and finally end up at the `Xcm Executor`
on the right.

![Untitled
(1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d)

## Further changes

- Bumped the default suspension, drop and resume thresholds in
`QueueConfigData::default()`.
- `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when
they would be a noop.
- Properly validate the `QueueConfigData` before setting it.
- Marked weight files as auto-generated so they wont auto-expand in the
MR files view.
- Move the `hypothetical` asserts to `frame_support` under the name
`experimental_hypothetically`

Questions:
- [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in
the runtimes? Not sure how to best fix. Just having them like this makes
tests fail that rely on the real message processor when the feature is
enabled.
- [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler
already takes 80% so I put it to 10% but that is quite low.

TODO:
- [x] Remove c&p code after
https://github.com/paritytech/polkadot/pull/6271
- [x] Use `HandleMessage` once it is public in Substrate
- [x] fix `runtime-benchmarks` feature
https://github.com/paritytech/polkadot/pull/6966


- [x] Benchmarks
- [x] Tests
- [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended`
- [x] Possibly cleanup Migrations (DMP+XCMP)
- [x] optional: create `TransformProcessMessageOrigin` in Substrate and
replace `ProcessFromSibling`
- [ ] Rerun weights on ref HW

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarLiam Aharon <[email protected]>
Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: default avatarKian Paimani <[email protected]>
Co-authored-by: command-bot <>
      e1c033eb
  41. Nov 01, 2023
  43. Oct 31, 2023
  45. Oct 27, 2023
  47. Oct 26, 2023
    • Alin Dima's avatar
      cumulus: fix test runtimes panic (#2039) · 1b08bdd2
      Alin Dima authored 
      the min slot duration should be 0 only if the `experimental` feature is
enabled. otherwise, the runtime will panic on a division by 0.
      1b08bdd2
    • Branislav Kontur's avatar
      Removed TODO from test-case for hard-coded delivery fee estimation (#2042) · 21d36b7b
      Branislav Kontur authored 
      

Co-authored-by: default avatarAdrian Catangiu <[email protected]>
      21d36b7b
    • Dastan's avatar
      Expose collection attributes from `Inspect` trait (#1914) · 0bcebac4
      Dastan authored 
      # Description

- What does this PR do?

While working with `pallet_nfts` through `nonfungibles_v2` traits
`Inspect, Mutate`, I found out that once you have set the collection
attribute with `<Nfts as Mutate>::set_collection_attribute()`, it's not
possible to read it with `<Nfts as Inspect>::collection_attribute()`
since they use different `namespace` values. When setting the attribute,
`AttributeNamespace::Pallet` is used, while
`AttributeNamespace::CollectionOwner` is used when reading.

more context:
https://github.com/freeverseio/laos/issues/7#issuecomment-1766137370

This PR makes `item` an optional parameter in
`Inspect::system_attribute()`, to be able to read collection attributes.

- Why are these changes needed?

To be able to read collection level attributes when reading attributes
of the collection. It will be possible to read collection attributes by
passing `None` for `item`

- How were these changes implemented and what do they affect?

`NftsApi` is also affected and `NftsApi::system_attribute()` now accepts
optional `item` parameter.

## Breaking change

Because of the change in the `NftsApi::system_attribute()` method's
`item` param, parachains who integrated the `NftsApi` need to update
their API code and frontend integrations accordingly. AssetHubs are
unaffected since the NftsApi wasn't released on those parachains yet.
      0bcebac4
  49. Oct 25, 2023
    • Branislav Kontur's avatar
      [testnet] Align testnet system parachain runtimes using... · f6560c2b
      Branislav Kontur authored 
      [testnet] Align testnet system parachain runtimes using `RelayTreasuryLocation` and `SystemParachains` in the same way (#2023)

This PR addresses several issues:
- simplify referencing `RelayTreasuryLocation` without needing
additional `RelayTreasury` struct
- fix for referencing `SystemParachains` from parachain with `parents:
1` instead of `parents: 0`
- removed hard-coded constants and fix tests for `asset-hub-rococo`
which was merged to master after
https://github.com/paritytech/polkadot-sdk/pull/1726

---------

Co-authored-by: command-bot <>
      f6560c2b