- Feb 16, 2024
-
-
Dónal Murray authored
This brings functionality to Westend's Coretime Chain runtime, where previously it was not much more than a shell. It is assumed that the Coretime pallet will have the same index in the Westend runtime as it does in Rococo for the runtime calls. TODO: - [x] Generate chainspec - [x] Regenerate weights - [x] Check hardcoded RuntimeCall weights against relay weights for transacts Aura key generation: https://github.com/paritytech/devops/issues/2725 --------- Co-authored-by: command-bot <> Co-authored-by: Bastian Köcher <[email protected]> Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>
-
- Jan 31, 2024
-
-
Branislav Kontur authored
[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657) I started this investigation/issue based on @liamaharon question [here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499). ## Problem The `pallet_balances` integrity test should correctly detect that the runtime has correct distinct `HoldReasons` variant count. I assume the same situation exists for RuntimeFreezeReason. It is not a critical problem, if we set `MaxHolds` with a sufficiently large value, everything should be ok. However, in this case, the integrity_test check becomes less useful. **Situation for "any" runtime:** - `HoldReason` enums from different pallets: ```rust /// from pallet_nis #[pallet::composite_enum] pub enum HoldReason { NftReceipt, } /// from pallet_preimage #[pallet::composite_enum] pub enum HoldReason { Preimage, } // from pallet_state-trie-migration #[pallet::composite_enum] pub enum HoldReason { SlashForContinueMigrate, SlashForMigrateCustomTop, SlashForMigrateCustomChild, } ``` - generated `RuntimeHoldReason` enum looks like: ```rust pub enum RuntimeHoldReason { #[codec(index = 32u8)] Preimage(pallet_preimage::HoldReason), #[codec(index = 38u8)] Nis(pallet_nis::HoldReason), #[codec(index = 42u8)] StateTrieMigration(pallet_state_trie_migration::HoldReason), } ``` - composite enum `RuntimeHoldReason` variant count is detected as `3` - we set `type MaxHolds = ConstU32<3>` - `pallet_balances::integrity_test` is ok with `3`(at least 3) However, the real problem can occur in a live runtime where some functionality might stop working. This is due to a total of 5 distinct hold reasons (for pallets with multi-instance support, it is even more), and not all of them can be used because of an incorrect `MaxHolds`, which is deemed acceptable according to the `integrity_test`: ``` // pseudo-code - if we try to call all of these: T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(), &nft_owner, deposit)?; // With `type MaxHolds = ConstU32<3>` these two will fail T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(), &nft_owner, deposit)?; ``` ## Solutions A macro `#[pallet::*]` expansion is extended of `VariantCount` implementation for the `#[pallet::composite_enum]` enum type. This expansion generates the `VariantCount` implementation for pallets' `HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants must be plain enum values without fields to ensure a deterministic count. The composite runtime enum, `RuntimeHoldReason` and `RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum of pallets' enum `VariantCount::VARIANT_COUNT`: ```rust #[frame_support::pallet(dev_mode)] mod module_single_instance { #[pallet::composite_enum] pub enum HoldReason { ModuleSingleInstanceReason1, ModuleSingleInstanceReason2, } ... } #[frame_support::pallet(dev_mode)] mod module_multi_instance { #[pallet::composite_enum] pub enum HoldReason<I: 'static = ()> { ModuleMultiInstanceReason1, ModuleMultiInstanceReason2, ModuleMultiInstanceReason3, } ... } impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount for RuntimeHoldReason { const VARIANT_COUNT: u32 = 0 + module_single_instance::HoldReason::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT; } ``` In addition, `MaxHolds` is removed (as suggested [here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573)) from `pallet_balances`, and its `Holds` are now bounded to `RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let the runtime specify `MaxHolds`. ## For reviewers Relevant changes can be found here: - `substrate/frame/support/procedural/src/lib.rs` - `substrate/frame/support/procedural/src/pallet/parse/composite.rs` - `substrate/frame/support/procedural/src/pallet/expand/composite.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs` - `substrate/frame/support/src/traits/misc.rs` And the rest of the files is just about removed `MaxHolds` from `pallet_balances` ## Next steps Do the same for `MaxFreezes` https://github.com/paritytech/polkadot-sdk/issues/2997 . --------- Co-authored-by: command-bot <> Co-authored-by: Bastian Köcher <[email protected]> Co-authored-by: Dónal Murray <[email protected]> Co-authored-by: gupnik <[email protected]>
-
- Jan 30, 2024
-
-
Oliver Tale-Yazdi authored
Add `Balances::force_adjust_total_issuance` as preparation for fixing https://github.com/polkadot-fellows/runtimes/issues/147 . Important changes in `substrate/frame/balances/src/lib.rs`. TODO: - [x] Update weights --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: command-bot <> Co-authored-by: Bastian Köcher <[email protected]>
-
- Jan 16, 2024
-
-
Francisco Aguirre authored
# Note for reviewer Most changes are just syntax changes necessary for the new version. Most important files should be the ones under the `xcm` folder. # Description Added XCMv4. ## Removed `Multi` prefix The following types have been renamed: - MultiLocation -> Location - MultiAsset -> Asset - MultiAssets -> Assets - InteriorMultiLocation -> InteriorLocation - MultiAssetFilter -> AssetFilter - VersionedMultiAsset -> VersionedAsset - WildMultiAsset -> WildAsset - VersionedMultiLocation -> VersionedLocation In order to fix a name conflict, the `Assets` in `xcm-executor` were renamed to `HoldingAssets`, as they represent assets in holding. ## Removed `Abstract` asset id It was not being used anywhere and this simplifies the code. Now assets are just constructed as follows: ```rust let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into(); ``` No need for specifying `Concrete` anymore. ## Outcome is now a named fields struct Instead of ```rust pub enum Outcome { Complete(Weight), Incomplete(Weight, Error), Error(Error), } ``` we now have ```rust pub enum Outcome { Complete { used: Weight }, Incomplete { used: Weight, error: Error }, Error { error: Error }, } ``` ## Added Reanchorable trait Now both locations and assets implement this trait, making it easier to reanchor both. ## New syntax for building locations and junctions Now junctions are built using the following methods: ```rust let location = Location { parents: 1, interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into() }; ``` or ```rust let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]); ``` And they are matched like so: ```rust match location.unpack() { (1, [Parachain(id)]) => ... (0, Here) => ..., (1, [_]) => ..., } ``` This syntax is mandatory in v4, and has been also implemented for v2 and v3 for easier migration. This was needed to make all sizes smaller. # TODO - [x] Scaffold v4 - [x] Port github.com/paritytech/polkadot/pull/7236 - [x] Remove `Multi` prefix - [x] Remove `Abstract` asset id --------- Co-authored-by: command-bot <> Co-authored-by: Keith Yeung <[email protected]>
-
- Jan 05, 2024
-
-
Tsvetomir Dimitrov authored
Fix some issues reported by clippy
-
- Dec 20, 2023
-
-
joe petrowski authored
Should have merged master into #2682 before merging.
-
- Dec 19, 2023
-
-
joe petrowski authored
New runtimes for the Coretime Chain (a.k.a. "Broker Chain") described in RFC-1. Replaces https://github.com/paritytech/cumulus/pull/2889 - [x] Add Agile Coretime pallet https://github.com/paritytech/substrate/pull/14568 - [x] Generate chain specs for local and testnets - [x] Deploy parachain on Rococo - Done: [rococo-coretime-rpc.polkadot.io](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Frococo-coretime-rpc.polkadot.io#/explorer) DevOps issue for Aura keygen: https://github.com/paritytech/devops/issues/2725 Edit (Dónal): This PR is mainly for Rococo, the Westend runtime is a shell with no `Broker` pallet. The Rococo runtime has the broker calls filtered for initial deployment. --------- Co-authored-by: Dónal Murray <[email protected]> Co-authored-by: 0xmovses <[email protected]> Co-authored-by: Liam Aharon <[email protected]> Co-authored-by: Bastian Köcher <[email protected]> Co-authored-by: Marcin S. <[email protected]> Co-authored-by: Bastian Köcher <[email protected]> Co-authored-by: command-bot <> Co-authored-by: Branislav Kontur <[email protected]>
-