Clean up all the old syntax.

---------

Co-authored-by: command-bot <>
Co-authored-by: gupnik <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: Maksym H <[email protected]>

This PR backports version bumps from release branch
`release-polkadot-v1.6.0` back to `master` and also moved `prdoc` files
related to the release to the appropriate folder

# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <[email protected]>

Rococo and Westend runtimes for the "People Chain". This chain contains
the Identity pallet with plans to migrate all related data from the
Relay Chain.

Changes `IdentityInfo` to:

- Remove `additional_fields`.
- Add `github` and `discord` as first class fields. From scraping chain
data, these were the only two additional fields used (for the Fellowship
and Ambassador Program, respectively).
- Rename `riot` to `matrix`.

Note: This will use the script in
https://github.com/paritytech/polkadot-sdk/pull/2025 to generate the
genesis state.

TODO:

- [x] https://github.com/paritytech/polkadot-sdk/pull/1814 and
integration of the Identity Migrator pallet for migration.
- [x] Tests: https://github.com/paritytech/polkadot-sdk/pull/2373

---------

Co-authored-by: Muharem <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: Richard Melkonian <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

- Updates all safe call filters to allow `system::authorize_upgrade`.
- Updates Coretime safe call filter to allow `sudo` and
`system_set_storage`.
- Update Coretime teleports to allow teleportation with other system
chains.

---------

Co-authored-by: Bastian Köcher <[email protected]>

Adds the `authorize_upgrade` -> `enact_authorized_upgrade` pattern to
`frame-system`. This will be useful for upgrading bridged chains that
are under the governance of Polkadot without passing entire runtime Wasm
blobs over a bridge.

Notes:

- Changed `enact_authorized_upgrade` to `apply_authorized_upgrade`.
Personal opinion, "apply" more accurately expresses what it's doing. Can
change back if outvoted.
- Remove `check_version` in favor of two extrinsics, so as to make
_checked_ the default.
- Left calls in `parachain-system` and marked as deprecated to prevent
breaking the API. They just call into the `frame-system` functions.
- Updated `frame-system` benchmarks to v2 syntax.

---------

Co-authored-by: command-bot <>

This PR contains just a few clippy fixes and nits, which are, however,
relaxed by workspace clippy settings here:
https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506

---------

Co-authored-by: Dmitry Sinyavin <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

In the move from the old `Currency` traits to the new `fungible/s`
family of traits, we already had the `FungiblesAdapter` and
`NonFungiblesAdapter` for multiple fungible and non fungible assets
respectively. However, for handling only one fungible asset, we were
missing a `FungibleAdapter`, and so used the old `CurrencyAdapter`
instead. This PR aims to fill in that gap, and provide the new adapter
for more updated examples.

I marked the old `CurrencyAdapter` as deprecated as part of this PR, and
I'll change it to the new `FungibleAdapter` in a following PR.
The two stages are separated so as to not bloat this PR with some name
fixes in tests.

---------

Co-authored-by: command-bot <>

We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.

There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.

Dependencies:

- [x] PR that upgrades CI to use rust 1.74 is merged.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

We were not filtering for sibling parachains, but for sibling anything

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: command-bot <>

This PR introduces a script and some templates to use the prdoc involved
in a release and build:
- the changelog
- a simple draft of audience documentation

Since the prdoc presence was enforced in the middle of the version
1.5.0, not all PRs did come with a `prdoc` file.
This PR creates all the missing `prdoc` files with some minimum content
allowing to properly generate the changelog.
The generated content is **not** suitable for the audience
documentation.

The audience documentation will be possible with the next version, when
all PR come with a proper `prdoc`.

## Assumptions

- the prdoc files for release `vX.Y.Z` have been moved under
`prdoc/X.Y.Z`
- the changelog requires for now for the prdoc files to contain author +
topic. Thos fields are optional.

The build script can  be called as:
```
VERSION=X.Y.Z ./scripts/release/build-changelogs.sh
```

Related:
-  #1408

---------

Co-authored-by: EgorPopelyaev <[email protected]>

Treasury Pallet Instance for the Fellowship in Westend Collectives.

In this update, we present a Treasury Pallet Instance that is under the
control of the Fellowship body, with oversight from the Root and
Treasurer origins. Here's how it is governed:
- the Root origin have the authority to reject or approve spend
proposals, with no amount limit for approvals.
- the Treasurer origin have the authority to reject or approve spend
proposals, with approval limits of up to 10,000,000 DOT.
- Voice of all Fellows ranked at 3 or above can reject or approve spend
proposals, with a maximum approval limit of 10,000 DOT.
- Voice of Fellows ranked at 4 or above can also reject or approve spend
proposals, with a maximum approval limit of 10,000,000 DOT.

Additionally, we introduce the Asset Rate Pallet Instance to establish
conversion rates from asset A to B. This is used to determine if a
proposed spend amount involving a non-native asset is permissible by the
commanding origin. The rates can be set up by the Root, Treasurer
origins, or Voice of all Fellows.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: joepetrowski <[email protected]>

`testnets-common` was introduced recently to start to separate testnet
parachain configurations from those of Polkadot and Kusama.

The `locks-review` and `polkadot-review` requirements are removed from
`parachains-common` in
https://github.com/paritytech/polkadot-sdk/pull/2564 and there are
[plans](https://github.com/paritytech/polkadot-sdk/pull/2564#discussion_r1410882115)
to move the Polkadot and Kusama contents of that package to the
fellowship, `testnets-common` is no longer needed.

This PR removes the crate and replaces uses of it in
`collectives-westend`, the only place it is currently used.

As suggested in this thread:
https://github.com/polkadot-fellows/runtimes/pull/87#discussion_r1400237122

We already have the `IsChildSystemParachain`, which may be used at relay
chain, but it can't be used at a parachain level. So let's use
`AllSiblingSystemParachains` for that. I was thinking about
`AllSystemParachains`, but it may cause wrong impression that it can be
used at a relay chain level.

---------

Co-authored-by: joe petrowski <[email protected]>

# Motivation (+testing)

### Enable easy `ForeignAssets` transfers using `pallet-xcm` 

We had just previously added capabilities to teleport fees during
reserve-based transfers, but what about reserve-transferring fees when
needing to teleport some non-fee asset?

This PR aligns everything under either explicit reserve-transfer,
explicit teleport, or this new flexible `transfer_assets()` which can
mix and match as needed with fewer artificial constraints imposed to the
user.

This will enable, for example, a (non-system) parachain to teleport
their `ForeignAssets` assets to AssetHub while using DOT to pay fees.
(the assets are teleported - as foreign assets should from their owner
chain - while DOT used for fees can only be reserve-based transferred
between said parachain and AssetHub).

Added `xcm-emulator` tests for this scenario ^.

# Description

Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based
transfers for all `assets` including fees.

Similarly `(limited_)teleport_assets` only allows teleports for all
`assets` including fees.
    
For complex combinations of asset transfers where assets and fees may
have different reserves or different reserve/teleport trust
configurations, users can use the newly added `transfer_assets()`
extrinsic which is more flexible in allowing more complex scenarios.

`assets` (excluding `fees`) must have same reserve location or otherwise
be teleportable to `dest`.
No limitations imposed on `fees`.

- for local reserve: transfer assets to sovereign account of destination
chain and forward a notification XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`.
- for destination reserve: burn local assets and forward a notification
to `dest` chain to withdraw the reserve assets from this chain's
sovereign account and deposit them to `beneficiary`.
- for remote reserve: burn local assets, forward XCM to reserve chain to
move reserves from this chain's SA to `dest` chain's SA, and forward
another XCM to `dest` to mint and deposit reserve-based assets to
`beneficiary`.
- for teleports: burn local assets and forward XCM to `dest` chain to
mint/teleport assets and deposit them to `beneficiary`.

## Review notes

Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the
rest of the PR is new tests and improving existing tests.

---------

Co-authored-by: command-bot <>

Removes obsolete fields from the `QueueConfigData` structure. For the
remaining fields, if they use the old defaults, we replace them with the
new defaults.

Resolves: https://github.com/paritytech/polkadot-sdk/issues/1795

Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.

If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html

@ggwpez

, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.

TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Westend SP dmp queue pallet removal is complete.

<img width="1499" alt="Screenshot 2023-11-28 at 08 31 27"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/906246fb-3de9-4133-a827-431636a097ad">

<img width="1499" alt="Screenshot 2023-11-28 at 08 32 08"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/bde84891-b044-42c7-9a0b-59125cd24db1">

<img width="1499" alt="Screenshot 2023-11-28 at 08 31 45"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/38337484-0856-45c0-b9ff-8c785bc3c0e3">

## Overview

This PR aligns the `spec_version` formatting to the [recent
changes](https://github.com/polkadot-fellows/runtimes/pull/26/files#diff-efa4caeb17487ecb13d8f5eb7863c3241d84afa2e73fbf25909a2ca89df0f362R142)
made for the Polkadot/Kusama runtimes.

It also backports the latest version `v1.4.0` bumps as `1_004_000`.

## Details

During the switch from `v0.9` to `v1.x`, the format of the
`spec_version` was modified from: `(M)m_ppp` for a runtime considered on
version `M.m.pp`. For instance `0.9.42` had a `spec_version` of `9420`.

With the transition to `v1.x`, the format was changed to a bigger number
(still `u32`) formatted as `MM_mm_ppp` where `1.2.3` would be stored as
`01_02_003`.

This PR aligns the format with that has been introduced in the
fellowship repo: `MMM_mmm_ppp`.

---------

Co-authored-by: Bastian Köcher <[email protected]>

Collectives Westend is missing an `on-chain-release-build` feature flag.

This PR fixes two things:
- relax `force_default_xcm_version` for testnet system parachains (e.g.
BridgeHubWestend has now 2 and there is no way to change it to 3, so we
need to call `force_xcm_version(3)` for every parachain that it is
connected to, because we send XCMv3 messages)
- add `Storage` item to `PolkadotXcm` pallet definition (now we cannot
see storage items for `pallet_xcm` in PJS)


## TODO

- [ ] when merged open PR to `polkadot-fellows/runtimes` repo

Add collectives and glutton parachain westend runtimes to prepare for
#1737.

The removal of system parachain native runtimes #1737 is blocked until
chainspecs and runtime APIs can be dealt with cleanly (merge of #1256
and follow up PRs).

In the meantime, these additions are ready to be merged to `master`, so
I have separated them out into this PR.

Also marked `bridge-hub-westend` as unimplemented in line with [this
issue](https://github.com/paritytech/parity-bridges-common/issues/2602).

TODO
- [x] add to `command-bot` benchmarks
- [x] add to `command-bot-scripts` benchmarks
- [x] generate weights

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Muharem <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>