- Nov 21, 2023
-
-
Sophia Gold authored
This updates the tick runtime and polkadot-parachain collator to use async backing.
-
- Nov 13, 2023
-
-
Adrian Catangiu authored
## Motivation `pallet-xcm` is the main user-facing interface for XCM functionality, including assets manipulation functions like `teleportAssets()` and `reserve_transfer_assets()` calls. While `teleportAsset()` works both ways, `reserve_transfer_assets()` works only for sending reserve-based assets to a remote destination and beneficiary when the reserve is the _local chain_. ## Solution This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to support transfers when reserves are other chains. This will allow complete, **bi-directional** reserve-based asset transfers user stories using `pallet-xcm`. Enables following scenarios: - transferring assets with local reserve (was previously supported iff asset used as fee also had local reserve - now it works in all cases), - transferring assets with reserve on destination, - transferring assets with reserve on remote/third-party chain (iff assets and fees have same remote reserve), - transferring assets with reserve different than the reserve of the asset to be used as fees - meaning can be used to transfer random asset with local/dest reserve while using DOT for fees on all involved chains, even if DOT local/dest reserve doesn't match asset reserve, - transferring assets with any type of local/dest reserve while using fees which can be teleported between involved chains. All of the above is done by pallet inner logic without the user having to specify which scenario/reserves/teleports/etc. The correct scenario and corresponding XCM programs are identified, and respectively, built automatically based on runtime configuration of trusted teleporters and trusted reserves. #### Current limitations: - while `fees` and "non-fee" `assets` CAN have different reserves (or fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among themselves, have different reserve locations (this is also implicitly enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely increased in the future). - `fees` and "non-fee" `assets` CANNOT have **different remote** reserves (this could also be supported in the future, but adds even more complexity while possibly not being worth it - we'll see what the future holds). Fixes https://github.com/paritytech/polkadot-sdk/issues/1584 Fixes https://github.com/paritytech/polkadot-sdk/issues/2055 --------- Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]>
-
- Nov 02, 2023
-
-
Oliver Tale-Yazdi authored(imported from https://github.com/paritytech/cumulus/pull/2157) ## Changes This MR refactores the XCMP, Parachains System and DMP pallets to use the [MessageQueue](https://github.com/paritytech/substrate/pull/12485) for delayed execution of incoming messages. The DMP pallet is entirely replaced by the MQ and thereby removed. This allows for PoV-bounded execution and resolves a number of issues that stem from the current work-around. All System Parachains adopt this change. The most important changes are in `primitives/core/src/lib.rs`, `parachains/common/src/process_xcm_message.rs`, `pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs` and the runtime configs. ### DMP Queue Pallet The pallet got removed and its logic refactored into parachain-system. Overweight message management can be done directly through the MQ pallet. Final undeployment migrations are provided by `cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that can be configured with an aux config trait like: ```rust parameter_types! { pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME; pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent; } impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime { type PalletName = DmpQueuePalletName; type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>; type DbWeight = <Runtime as frame_system::Config>::DbWeight; } // And adding them to your Migrations tuple: pub type Migrations = ( ... cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>, cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>, ); ``` ### XCMP Queue pallet Removed all dispatch queue functionality. Incoming XCMP messages are now either: Immediately handled if they are Signals, enqueued into the MQ pallet otherwise. New config items for the XCMP queue pallet: ```rust /// The actual queue implementation that retains the messages for later processing. type XcmpQueue: EnqueueMessage<ParaId>; /// How a XCM over HRMP from a sibling parachain should be processed. type XcmpProcessor: ProcessMessage<Origin = ParaId>; /// The maximal number of suspended XCMP channels at the same time. #[pallet::constant] type MaxInboundSuspended: Get<u32>; ``` How to configure those: ```rust // Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since // the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s. type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>; // Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched // with origin `Junction::Sibling(…)`. type XcmpProcessor = ProcessFromSibling< ProcessXcmMessage< AggregateMessageOrigin, xcm_executor::XcmExecutor<xcm_config::XcmConfig>, RuntimeCall, >, >; // Not really important what to choose here. Just something larger than the maximal number of channels. type MaxInboundSuspended = sp_core::ConstU32<1_000>; ``` The `InboundXcmpStatus` storage item was replaced by `InboundXcmpSuspended` since it now only tracks inbound queue suspension and no message indices anymore. Now only sends the most recent channel `Signals`, as all prio ones are out-dated anyway. ### Parachain System pallet For `DMP` messages instead of forwarding them to the `DMP` pallet, it now pushes them to the configured `DmpQueue`. The message processing which was triggered in `set_validation_data` is now being done by the MQ pallet `on_initialize`. XCMP messages are still handed off to the `XcmpMessageHandler` (XCMP-Queue pallet) - no change here. New config items for the parachain system pallet: ```rust /// Queues inbound downward messages for delayed processing. /// /// Analogous to the `XcmpQueue` of the XCMP queue pallet. type DmpQueue: EnqueueMessage<AggregateMessageOrigin>; ``` How to configure: ```rust /// Use the MQ pallet to store DMP messages for delayed processing. type DmpQueue = MessageQueue; ``` ## Message Flow The flow of messages on the parachain side. Messages come in from the left via the `Validation Data` and finally end up at the `Xcm Executor` on the right.  ## Further changes - Bumped the default suspension, drop and resume thresholds in `QueueConfigData::default()`. - `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when they would be a noop. - Properly validate the `QueueConfigData` before setting it. - Marked weight files as auto-generated so they wont auto-expand in the MR files view. - Move the `hypothetical` asserts to `frame_support` under the name `experimental_hypothetically` Questions: - [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in the runtimes? Not sure how to best fix. Just having them like this makes tests fail that rely on the real message processor when the feature is enabled. - [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler already takes 80% so I put it to 10% but that is quite low. TODO: - [x] Remove c&p code after https://github.com/paritytech/polkadot/pull/6271 - [x] Use `HandleMessage` once it is public in Substrate - [x] fix `runtime-benchmarks` feature https://github.com/paritytech/polkadot/pull/6966 - [x] Benchmarks - [x] Tests - [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended` - [x] Possibly cleanup Migrations (DMP+XCMP) - [x] optional: create `TransformProcessMessageOrigin` in Substrate and replace `ProcessFromSibling` - [ ] Rerun weights on ref HW --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Kian Paimani <[email protected]> Co-authored-by: command-bot <>
-
- Oct 31, 2023
-
-
Lulu authored
Co-authored-by:
Sergejs Kostjucenko <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]>
-
- Oct 24, 2023
-
-
Kian Paimani authored
closes https://github.com/paritytech/polkadot-sdk/issues/1882 ## Breaking Changes This PR introduces a new item to `pallet_balances::Config`: ```diff trait Config { ++ type RuntimeFreezeReasons; } ``` This value is only used to check it against `type MaxFreeze`. A similar check has been added for `MaxHolds` against `RuntimeHoldReasons`, which is already given to `pallet_balances`. In all contexts, you should pass the real `RuntimeFreezeReasons` generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing `()` would also work, but it would imply that the runtime uses no freezes at all. --------- Signed-off-by:
-
- Oct 20, 2023
-
-
Bastian Köcher authored
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to crates.io as someone as squatted `xcm`. The problem with this rename is that the `TypeInfo` includes the crate name which ultimately lands in the metadata. The metadata is consumed by downstream users like `polkadot-js` or people building on top of `polkadot-js`. These people are using the entire `path` to find the type in the type registry. Thus, their code would break as the type path would now be [`staging_xcm`, `VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request fixes this by renaming the path segment `staging_xcm` to `xcm`. This requires: https://github.com/paritytech/scale-info/pull/197 --------- Co-authored-by:
-
- Oct 18, 2023
-
-
Keith Yeung authoredCombination of paritytech/polkadot#7005, its addon PR paritytech/polkadot#7585 and its companion paritytech/cumulus#2433. This PR introduces a new XcmFeesToAccount struct which implements the `FeeManager` trait, and assigns this struct as the `FeeManager` in the XCM config for all runtimes. The struct simply deposits all fees handled by the XCM executor to a specified account. In all runtimes, the specified account is configured as the treasury account. XCM __delivery__ fees are now being introduced (unless the root origin is sending a message to a system parachain on behalf of the originating chain). # Note for reviewers Most file changes are tests that had to be modified to account for the new fees. Main changes are in: - cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery fees exponential factor - polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the FeeManager implementation - All runtime xcm_config files <- To add the FeeManager to the XCM configuration # Important note After this change, instructions that create and send a new XCM (Query*, Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport, DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock) will require the corresponding origin account in the origin register to pay for transport delivery fees, and the onward message will fail to be sent if the origin account does not have the required amount. This delivery fee is on top of what we already collect as tx fees in pallet-xcm and XCM BuyExecution fees! Wallet UIs that want to expose the new delivery fee can do so using the formula: ``` delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee) ``` where the delivery fee factor can be obtained from the corresponding pallet based on which transport you are using (UMP, HRMP or bridges), the base fee is a constant, the encoded message length from the message itself and the per byte fee is the same as the configured per byte fee for txs (i.e. `TransactionByteFee`). --------- Co-authored-by:
Giles Cope <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
-
Adrian Catangiu authored
cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add asset-bridging support to it (#1215) This commit adds Rococo Asset Hub dedicated runtime so we can test new features here, before merging them in Kusama Asset Hub. Also adds one such feature: asset transfer over bridge (Rococo AssetHub <> Wococo AssetHub) - clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime` - make it use Rococo primitives, names, assets, constants, etc - add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo AssetHub Fixes #1128 --------- Co-authored-by:
-
Ignacio Palacios authored
Remove `publish = false` to publish the crate
-
- Sep 27, 2023
-
-
Michal Kucharczyk authoredThis PR implements [`GenesisBuilder` API](https://github.com/paritytech/polkadot-sdk/blob/a414ea7515c9cdc81f1d12410e646afc148250e8/substrate/primitives/genesis-builder/src/lib.rs#L38 ) for all the runtimes in polkadot repo. Step towards: paritytech/polkadot-sdk#25 --------- Co-authored-by:
ordian <[email protected]>
-
- Sep 18, 2023
-
-
Branislav Kontur authored
## Summary The term "common good parachain" has been abandoned in favor of "system parachain" - e.g. [Joe's speech at Decoded2023](https://youtu.be/CSO-ERHK2gY?t=456). This pull request tries to fix and align code with this vision. ## Impact The important change is implementation of `trait IsSystem` for `Id` [here](https://github.com/paritytech/polkadot-sdk/pull/1406/files#diff-0b7b4f5b962a18ce980354592b55ab2a27b5a2e9f6f8089ec803ca73853e8583R225-R229) where we changed condition from `< 1000` to `<= 1999`, which means that all parachain IDs bellow 1999 (included) are considered as "system parachain" IDs. This change has a direct impact on the following components: #### [ChildSystemParachainAsSuperuser](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/xcm-builder/src/origin_conversion.rs#L72-L88) This origin converter is used for allowing to process XCM `Transact` from "system parachain" on the relay chain - e.g. see [configuration for Kusama](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/runtime/kusama/src/xcm_config.rs#L92-L101). Only configured for Kusama, Westend, Rococo runtimes. **No need for this feature anymore.** See [comment](https://github.com/paritytech/polkadot-sdk/pull/1406#issuecomment-1708218715). #### [IsChildSystemParachain](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/xcm-builder/src/barriers.rs#L310-L317) `IsChildSystemParachain` is used with `AllowExplicitUnpaidExecutionFrom` barrier for checking XCM programs (they have to start with `UnpaidExecution` instruction). Only configured for Kusama, Westend, Rococo runtimes. **Overall the impact is low or mostly ok because it only allows unpaid execution for "system parachains" (e.g. AssetHub, BridgeHub...) on the relay chain.** #### [SiblingSystemParachainAsSuperuser](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/xcm-builder/src/origin_conversion.rs#L94-L114) Not used anywhere in `polkadot-sdk` repo. ## Unresolved Questions - [ ] constants `LOWEST_USER_ID` and `LOWEST_PUBLIC_ID` seem to express the same thing now, do we want to keep them both or deprecated one of them? If so, which one? - [x] determine impact for `ChildSystemParachainAsSuperuser` ## TODO - [ ] when merged here, open PR to the `polkadot-fellows` ## Related Material https://youtu.be/CSO-ERHK2gY?t=456 https://forum.polkadot.network/t/polkadot-protocol-and-common-good-parachains/866 https://wiki.polkadot.network/docs/learn-system-chains
-
- Sep 14, 2023
-
-
Muharem Ismailov authored
Enable `runtime-benchmarks` feature for `parachain-common` and `cumulus-primitives-utility` crates' dependencies. After adding `runtime-benchmarks = []` under `features` category in `Cargo.toml` files for the creates, I did run, > zepter lint propagate-feature --feature runtime-benchmarks --workspace --fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking" This changes required for https://github.com/paritytech/polkadot-sdk/pull/1333
-
- Aug 31, 2023
-
-
Bastian Köcher authored
* Rename `polkadot-parachain` to `polkadot-parachain-primitives` While doing this it also fixes some last `rustdoc` issues and fixes another Cargo warning related to `pallet-paged-list`. * Fix compilation * ".git/.scripts/commands/fmt/fmt.sh" * Fix XCM docs --------- Co-authored-by: command-bot <>
-
- Aug 30, 2023
-
-
Lulu authored
* Rename squatted crates This commit adds the staging- prefix to squatted crates so we can go forward and publish them to crates.io. Using the staging- prefix is a temp fix until we decide on replacement names. https://forum.parity.io/t/renaming-squated-crates-in-substrate-polkadot-cumulus/1964/6 * Fix test after crate renames * Update Lockfile
-
Przemek Rzad authored* Add missing Cumulus licenses * Typo * Add missing Substrate licenses * Single job checking the sub-repos in steps * Remove dates * Remove dates * Add missing (C) * Update FRAME UI tests Signed-off-by:
-
- Aug 29, 2023
-
-
Lulu authored
* Set test crates to nopublish * Don't publish more crates * Set even more crates to nopublish --------- Co-authored-by: -
Oliver Tale-Yazdi authored
* Fix build profiles Closes https://github.com/paritytech/polkadot-sdk/issues/1155 Signed-off-by:
-
- Aug 28, 2023
-
-
Oliver Tale-Yazdi authored
* Manually fix conflicting ? Signed-off-by:
🤦 Signed-off-by:
-
- Aug 25, 2023
-
-
Alexander Samusev authored
* Add CI for monorepo * fix frame tests * Format features Signed-off-by:
-
Alexander authoredSigned-off-by:alvicsam <[email protected]>
-
- Aug 24, 2023
-
-
Oliver Tale-Yazdi authored
* Fix aura config Signed-off-by:
-
- Aug 23, 2023
-
-
juangirini authored
* restructure macro related exports * restructure macro related exports * wip * wip * update cargo lock * refactor RuntimeDebug on unincluded segment * fmt * Companion: restructure `benchmarking` macro related exports (#3039) * wip * wip * restructure benchmarking macro related exports * add cargo lock --------- Co-authored-by: parity-processbot <>
-
- Aug 22, 2023
-
-
Egor_P authored
* Bump crate versions * Bump spec_version
-
- Aug 18, 2023
-
-
Chris Sosnin authored
* Update substrate & polkadot * min changes to make async backing compile * (async backing) parachain-system: track limitations for unincluded blocks (#2438) * unincluded segment draft * read para head from storage proof * read_para_head -> read_included_para_head * Provide pub interface * add errors * fix unincluded segment update * BlockTracker -> Ancestor * add a dmp limit * Read para head depending on the storage switch * doc comments * storage items docs * add a sanity check on block initialize * Check watermark * append to the segment on block finalize * Move segment update into set_validation_data * Resolve para head todo * option watermark * fix comment * Drop dmq check * fix weight * doc-comments on inherent invariant * Remove TODO * add todo * primitives tests * pallet tests * doc comments * refactor unincluded segment length into a ConsensusHook (#2501) * refactor unincluded segment length into a ConsensusHook * add docs * refactor bandwidth_out calculation Co-authored-by:
Chris Sosnin <[email protected]> * test for limits from impl * fmt * make tests compile * update comment * uncomment test * fix collator test by adding parent to state proof * patch HRMP watermark rules for unincluded segment * get consensus-common tests to pass, using unincluded segment * fix unincluded segment tests * get all tests passing * fmt * rustdoc CI * aura-ext: limit the number of authored blocks per slot (#2551) * aura_ext consensus hook * reverse dependency * include weight into hook * fix tests * remove stray println Co-authored-by:
Chris Sosnin <[email protected]> * parachain-system: ignore go ahead signal once upgrade is processed (#2594) * handle goahead signal for unincluded segment * doc comment * add test * parachain-system: drop processed messages from inherent data (#2590) * implement `drop_processed_messages` * drop messages based on relay parent number * adjust tests * drop changes to mqc * fix comment * drop test * drop more dead code * clippy * aura-ext: check slot in consensus hook and remove all `CheckInherents` logic (#2658) * aura-ext: check slot in consensus hook * convert relay chain slot * Make relay chain slot duration generic * use fixed velocity hook for pallets with aura * purge timestamp inherent * fix warning * adjust runtime tests * fix slots in tests * Make `xcm-emulator` test pass for new consensus hook (#2722) * add pallets on_initialize * tests pass * add AuraExt on_init * ".git/.scripts/commands/fmt/fmt.sh" --------- Co-authored-by: command-bot <> --------- Co-authored-by:
Ignacio Palacios <[email protected]> * update polkadot git refs * CollationGenerationConfig closure is now optional (#2772) * CollationGenerationConfig closure is now optional * fix test * propagate network-protocol-staging feature (#2899) * Feature Flagging Consensus Hook Type Parameter (#2911) * First pass * fmt * Added as default feature in tomls * Changed to direct dependency feature * Dealing with clippy error * Update pallets/parachain-system/src/lib.rs Co-authored-by:
asynchronous rob <[email protected]> --------- Co-authored-by:
Marcin S. <[email protected]> * (async backing) restore `CheckInherents` for backwards-compatibility (#2977) * bring back timestamp * Restore CheckInherents * revert to empty CheckInherents * make CheckInherents optional * attempt * properly end system blocks * add some more comments * ignore failing system parachain tests * update refs after main feature branch merge * comment out the offending tests because CI runs ignored tests * fix warnings * fmt * revert to polkadot master * cargo update -p polkadot-primitives -p sp-io --------- Co-authored-by:
Bradley Olson <[email protected]> Co-authored-by:
eskimor <[email protected]> Co-authored-by:
-
- Aug 15, 2023
-
-
dependabot[bot] authored
Bumps [log](https://github.com/rust-lang/log) from 0.4.19 to 0.4.20. - [Release notes](https://github.com/rust-lang/log/releases) - [Changelog](https://github.com/rust-lang/log/blob/master/CHANGELOG.md) - [Commits](https://github.com/rust-lang/log/compare/0.4.19...0.4.20 ) --- updated-dependencies: - dependency-name: log dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Aug 14, 2023
-
-
Oliver Tale-Yazdi authored
* Copy rustfmt.toml from Polkadot master Signed-off-by:
-
- Aug 10, 2023
-
-
Gavin Wood authored
* Polkadot parachains get topics * Formatting --------- Co-authored-by:joepetrowski <[email protected]> Co-authored-by: parity-processbot <>
-
- Jul 14, 2023
-
-
juangirini authored
* replace Index for Nonce * update lockfile for {"substrate", "polkadot"} --------- Co-authored-by: parity-processbot <>
-
- Jul 13, 2023
-
-
gupnik authored
Moves `Block` to `frame_system` instead of `construct_runtime` and removes `Header` and `BlockNumber` (#2790) * Fixes * Removes unused import * Uses Block and removes BlockNumber/Header from Chain * Fixes bridges * Fixes * Removes unused import * Fixes build * Uses correct RelayBlock * Minor fix * Fixes glutton-kusama * Uses correct RelayBlock * Minor fix * Fixes benchmark for pallet-bridge-parachains * Adds appropriate constraints * Minor fixes * Removes unused import * Fixes integrity tests * Minor fixes * Updates trait bounds * Uses custom bound for AsPrimitive * Fixes trait bounds * Revert "Fixes trait bounds" This reverts commit 0b0f42f583f3a616a88afe45fcd06d31e7d9a06f. * Revert "Uses custom bound for AsPrimitive" This reverts commit 838e5281adf8b6e9632a2abb9cd550db4ae24126. * No AsPrimitive trait bound for now * Removes bounds on Number * update lockfile for {"substrate", "polkadot"} * Formatting * ".git/.scripts/commands/fmt/fmt.sh" * Minor fix --------- Co-authored-by: parity-processbot <>
-
- Jul 12, 2023
-
-
Michal Kucharczyk authored
* GenesisBuild<T,I> deprecated. BuildGenesisConfig added * ".git/.scripts/commands/fmt/fmt.sh" * integration-tests/emulated: ..Default::default added to genesis configs * Cargo.lock updated * Cargo.lock updated * update lockfile for {"polkadot", "substrate"} * clippy fixes * clippy fixes * clippy fixes again --------- Co-authored-by: command-bot <>
-
- Jul 07, 2023
-
-
joe petrowski authored
* remove candidate when to invulnerable * fix * candidates to collators * make parameters consistent and more reasonable * add call to kick invulnerable candidates * factor removal into weight * fix: use accrue instead of add * make set_invulnerables non-atomic * benchmark add_invulnerable to account for candidate removal * don't remove from candidates with set_invulnerables * fix bounds on benchmarking * protect against zero min invulnerables underflow * extra event and tests * make candidates/invulnerables self-cleaning on session change * add integrity test * unused imports * make rococo-contracts have 1 collator
-
- Jul 06, 2023
-
-
dependabot[bot] authored
Bumps [smallvec](https://github.com/servo/rust-smallvec) from 1.10.0 to 1.11.0. - [Release notes](https://github.com/servo/rust-smallvec/releases) - [Commits](https://github.com/servo/rust-smallvec/compare/v1.10.0...v1.11.0 ) --- updated-dependencies: - dependency-name: smallvec dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by:
-
- Jul 03, 2023
-
-
dependabot[bot] authored
Bumps [scale-info](https://github.com/paritytech/scale-info) from 2.8.0 to 2.9.0. - [Release notes](https://github.com/paritytech/scale-info/releases) - [Changelog](https://github.com/paritytech/scale-info/blob/master/CHANGELOG.md) - [Commits](https://github.com/paritytech/scale-info/compare/v2.8.0...v2.9.0 ) --- updated-dependencies: - dependency-name: scale-info dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by:
-
- Jun 23, 2023
-
-
Squirrel authored
* Dex and payment by dex in westmint * Wrap U256 type for now (to support required traits.) * cargo fmt * We can now use U256 * Rename PromotedBalance * name change * Updating the code to master. TODO: handle dust! * cargo fmt * Minimising changes and step towards getting benchmarks compiling (still a From<u32> bound in the pallet) * minimise diff * Update parachains/runtimes/assets/westmint/src/lib.rs Co-authored-by:
Jegor Sidorenko <[email protected]> * Update parachains/runtimes/assets/westmint/src/lib.rs Co-authored-by:
-
- Jun 22, 2023
-
-
dependabot[bot] authored
Bumps [scale-info](https://github.com/paritytech/scale-info) from 2.7.0 to 2.8.0. - [Release notes](https://github.com/paritytech/scale-info/releases) - [Changelog](https://github.com/paritytech/scale-info/blob/master/CHANGELOG.md) - [Commits](https://github.com/paritytech/scale-info/compare/v2.7.0...v2.8.0 ) --- updated-dependencies: - dependency-name: scale-info dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by:
-
- Jun 19, 2023
-
-
Egor_P authored
* Bump crate versions * Bump spec_version to 9430
-
- Jun 13, 2023
-
-
dependabot[bot] authored
Bumps [log](https://github.com/rust-lang/log) from 0.4.18 to 0.4.19. - [Release notes](https://github.com/rust-lang/log/releases) - [Changelog](https://github.com/rust-lang/log/blob/master/CHANGELOG.md) - [Commits](https://github.com/rust-lang/log/compare/0.4.18...0.4.19 ) --- updated-dependencies: - dependency-name: log dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by:
-
- Jun 09, 2023
-
-
asynchronous rob authored
* Update all uses of pallet-aura to disallow multiple blocks per slot * use ConstBool * update lockfile for {"substrate", "polkadot"} --------- Co-authored-by: parity-processbot <>
-
- Jun 05, 2023
-
-
Just van Stam authored
* companion for xcm alias origin * update lockfile for {"polkadot", "substrate"} * add benchmark function for runtimes --------- Co-authored-by: parity-processbot <>
-
- Jun 02, 2023
-
-
joe petrowski authored
* change dir names * cargo toml updates * fix crate imports for build * change chain spec names and PR review rule * update cli to accept asset-hub * find/replace benchmark commands * integration tests * bridges docs * more integration tests * AuraId * other statemint tidying * rename statemint mod * chain spec mod * rename e2e test dirs * one more Runtime::Statemine * benchmark westmint * rename chain spec name and id * rename chain spec files * more tidying in scripts/docs/tests * rename old dir if exists * Force people to manually do the move. (Safer as there could be additional considerations with their setup) * review touchups * more renaming * Update polkadot-parachain/src/command.rs Co-authored-by:
Bastian Köcher <[email protected]> * better error message * do not break on-chain spec_name * log info message that path has been renamed * better penpal docs --------- Co-authored-by:
-
![dependabot[bot]'s avatar](https://secure.gravatar.com/avatar/48ea49be76d0c68403a7f3df87e3487d?s=80&d=identicon "dependabot[bot]")
