The `fee` should be calculated with the reanchored asset, otherwise it
could lead to a failure where the set aside fee ends up not being
enough.

@acatangiu



---------

Co-authored-by: Adrian Catangiu <[email protected]>

Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
- Set log to `0.4.20` everywhere
- Lift `log` to the workspace

Starting with a simpler one after seeing
https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw

.
This sets the `default-features` to `false` in the root and then
overwrites that in each create to its original value. This is necessary
since otherwise the `default` features are additive and its impossible
to disable them in the crate again once they are enabled in the
workspace.

I am using a tool to do this, so its mostly a test to see that it works
as expected.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

This fix aims to solve an issue in Kusama that resulted in failed
reserve asset transfers.

During multi-hop XCMs, like reserve asset transfers where the reserve is
not the sender nor the destination, but a third remote chain, the origin
is not available to pay for delivery fees out of their account directly,
so delivery fees should be paid out of transferred assets.

This commit also adds an xcm-emulator regression test that validates
this scenario is now working.

Signed-off-by: Adrian Catangiu <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

Related https://github.com/paritytech/polkadot-sdk/issues/3032

---

Using https://github.com/liamaharon/cargo-workspace-version-tools/

 

`cargo run -- sync --path ../polkadot-sdk`

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Moved from: https://github.com/paritytech/polkadot/pull/6951

closes https://github.com/paritytech/polkadot-sdk/issues/490

- [x] update cumulus

--- 
This PR introduces transactional processing of certain xcm instructions.
For the list of instructions checkout
https://github.com/paritytech/polkadot-sdk/issues/490. The transactional
processing is implemented as an xcm-executor config item. The two
implementations in this PR are `FrameTransactionalProcessor` and `()`.
The `()` implementation does no transactional processing. Each
implementation of the `ProcessTransaction` trait has an
`IS_TRANSACTIONAL` const that tells the XCVM if transactional processing
is actually implemented. If Transactional processing is implemented,
changes to touched registers should also be rolled back to prevent
inconsistencies.


Note for reviewers:
Check out the following safety assumption:
https://github.com/paritytech/polkadot-sdk/pull/1222/files#diff-4effad7d8c1c9de19fd27e18661cbf2128c8718f3b2420a27d2f816e0749ea53R30



---------

Co-authored-by: Keith Yeung <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: command-bot <>

If an Executor is required in some pallet's config, a mock might be
provided where `Executor = ()`. `()` already implements `ExecuteXcm`,
but not `XcmAssetTransfers`, which is also related. This PR just fixes
that so you can skip having to create a whole xcm configuration, which
is non-trivial right now.

# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <[email protected]>

Adds more logging to the XCM execution for better debugging.

We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.

There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.

Dependencies:

- [x] PR that upgrades CI to use rust 1.74 is merged.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.

If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html

@ggwpez

, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.

TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

On extrinsics/call, ensure local XCM execution is complete/successful.
Otherwise, fail the extrinsic so that state changes don't get committed
to the db.

Added regression tests that fail without the fix.

fixes #2237

---------

Co-authored-by: Adrian Catangiu <[email protected]>

## Motivation

`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.

While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.

## Solution

This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.

Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.

All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.

#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).

Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055



---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>

We are introducing a new set of `XcmController` traits (final name yet
to be determined).
These traits are implemented by `pallet-xcm` and allows other pallets,
such as `pallet_contracts`, to rely on these traits instead of tight
coupling them to `pallet-xcm`.

Using only the existing Xcm traits would mean duplicating the logic from
`pallet-xcm` in these other pallets, which we aim to avoid. Our
objective is to ensure that when these APIs are called from
`pallet-contracts`, they produce the exact same outcomes as if called
directly from `pallet-xcm`.

The other benefits is that we can also expose return values to
`pallet-contracts` instead of just calling `pallet-xcm` dispatchable and
getting a `DispatchResult` back.

See traits integration in this PR
https://github.com/paritytech/polkadot-sdk/pull/1248

, where the traits
are used as follow to define and implement `pallet-contracts` Config.
```rs
// Contracts config:
pub trait Config: frame_system::Config {
  // ...

  /// A type that exposes XCM APIs, allowing contracts to interact with other parachains, and
  /// execute XCM programs.
  type Xcm: xcm_executor::traits::Controller<
	  OriginFor<Self>,
	  <Self as frame_system::Config>::RuntimeCall,
	  BlockNumberFor<Self>,
  >;
}

// implementation
impl pallet_contracts::Config for Runtime {
        // ...

	type Xcm = pallet_xcm::Pallet<Self>;
}
```

---------

Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: command-bot <>

Adds a config file that allows to run `zepter` without any arguments in
the workspace to address all issues.
A secondary workflow for the CI is provided as `zepter run check`. Both
the formatting and linting are now in one check for efficiancy.

The latest version also detects some more things that `featalign` was
already showing.

Error message [in the
CI](https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/3916205)
now looks like this:
```pre
...
crate 'test-parachains' (/Users/vados/Documents/work/polkadot-sdk/polkadot/parachain/test-parachains/Cargo.toml)
  feature 'std'
    must propagate to:
      parity-scale-codec
Found 55 issues (run with --fix to fix).
Error: Command 'lint propagate-feature' failed with exit code 1

Polkadot-SDK uses the Zepter CLI to detect abnormalities in the feature configuration.
It looks like one more more checks failed; please check the console output. You can try to automatically address them by running `zepter`.
Otherwise please ask directly in the Merge Request, GitHub Discussions or on Matrix Chat, thank you.

For more information, see:
  - https://github.com/paritytech/polkadot-sdk/issues/1831
  - https://github.com/ggwpez/zepter


```

TODO:
- [x] Check that CI fails correctly

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.

This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.

The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.

XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).

# Note for reviewers

Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration

# Important note

After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!

Wallet UIs that want to expose the new delivery fee can do so using the
formula:

```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```

where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Giles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

* Add environmental variable to track decoded instructions

* Fix doc tests

* Fix manifest formatting

* ".git/.scripts/commands/fmt/fmt.sh"

* Add one more test

* Add SetAppendix in test

---------

Co-authored-by: command-bot <>

* restructure dispatch macro related exports

* moved Dispatchable to lib.rs

* fix .gitignore final newline

* ".git/.scripts/commands/fmt/fmt.sh"

* fix rustdocs

* wip

---------

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: ordian <[email protected]>

* Rename squatted crates

This commit adds the staging- prefix to squatted crates so we can go forward and publish them to crates.io.

Using the staging- prefix is a temp fix until we decide on replacement names.
https://forum.parity.io/t/renaming-squated-crates-in-substrate-polkadot-cumulus/1964/6

* Fix test after crate renames

* Update Lockfile

* Fix build profiles

Closes https://github.com/paritytech/polkadot-sdk/issues/1155



Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Manually set version to 1.0.0

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use workspace repo

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* 'Authors and Edition from workspace

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Manually fix conflicting ?

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove duplicates

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Autofix feature propagation

zepter lint propagate-feature --feature try-runtime --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="try-runtime:frame-try-runtime"
zepter lint propagate-feature --feature runtime-benchmarks --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking"
zepter lint propagate-feature --feature std --left-side-feature-missing=ignore --workspace --fix
zepter f f

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump zepter

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add some duplicates

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Add some duplicates"

This reverts commit c6ce6272

.

* Remove default enabled features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump Zepter

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump in correct location 🤦



Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* DNM: Add some mistakes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* DNM: Add some mistakes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "DNM: Add some mistakes"

This reverts commit d469b3f0.

* Revert "DNM: Add some mistakes"

This reverts commit d892a73a

.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add CI for monorepo

* fix frame tests

* Format features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* add note for skipping tests and disable test-linux-stable-all

* Fix tests and compile issues (#1152)

* Fix feature dependant import

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump test timeout

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove feature gate

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add resolver 2

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove old lockfile

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Format features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix check-dependency-rules

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* rm test-runtime

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Actually fix script

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* enable cargo-check-each-crate-macos

* Run check-each-crate on 6 machines (#1163)

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Signed-off-by: alvicsam <[email protected]>

* move RuntimeDebug out of frame_support

* move RuntimeDebug out of frame_support

* fix xcm export

* ".git/.scripts/commands/fmt/fmt.sh"

* fix xcm intefration tests

* fix cargo lock for xcm intefration tests

* wip

* restructure benchmarking macro related exports

* update cargo lock

---------

Co-authored-by: parity-processbot <>

* Use same rustfmt.toml as Substrate

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* format format file

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Format with new config

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add Substrate Clippy config

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Print Clippy version in CI

Otherwise its difficult to reproduce locally.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Make fmt happy

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update node/core/pvf/src/error.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Update node/core/pvf/src/error.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Add license to crates

This is required to publish to crates.io

* Add more licenses

* added XcmContext to WeightTrader trait

* cargo fmt

* make xcm context optional

* make compile

* fix compile

* `XcmContext` to `buy_weight / refund_weight`

---------

Co-authored-by: Patricio Napoli <[email protected]>
Co-authored-by: Giles Cope <[email protected]>
Co-authored-by: parity-processbot <>

* Companion for removal of execution strategies

https://github.com/paritytech/substrate/pull/14387

* Fix some tests

* 🤦

* Adapt to latest changes

* Start supporting the offchain transaction pool

* Fix tests

* FMT

* Remove patches

* Update Substrate

* update lockfile for {"substrate"}

* Fix parachain upgrade smoke test

* Fix test

* Rewrite all tests to use `MockSubstemClient`

---------

Co-authored-by: parity-processbot <>

* Remove

* rm trait

* Implement AliasOrigin processing in XCVM

* add builder types and first test

* switch to more general builder types

* clone target for RemovePrefixAccountId32

* change builder types

* change AliasForeignAccountId32 and add test for AliasCase

* add Aliasers type to xcm configs

* add benchmark

* benchmark fix

* add benchmark function for runtimes

* fix alias_origin result types

* fix benchmark test

* add runtime-benchmarks feature in pallet-xcm-benchmarks

* fmt

* remove AliasCase, add test and fmt

* address feedback

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::generic

* ".git/.scripts/commands/bench/bench.sh" xcm westend pallet_xcm_benchmarks::generic

* ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::generic

* address feedback

* lock

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::generic

* ".git/.scripts/commands/bench/bench.sh" xcm westend pallet_xcm_benchmarks::generic

* ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::generic

* change doc

* fmt

---------

Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: command-bot <>

* Introduce an extensible location-to-hash-account

* Convert becomes RevFallRefConvert

* Use ConvertLocation trait

* Remove Convert usage

* Builds

* Fix warnings

* Remove unused types

* Bump lock

* No need for aliasing

* Remove unused

* Deprecate legacy conversion

* Fixes

* Fixes

* Update Cargo.toml

Co-authored-by: Muharem Ismailov <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

---------

Co-authored-by: Muharem Ismailov <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

* Move XCM query functionality to trait

* Fix tests

* Add PayOverXcm implementation

* fix the PayOverXcm trait to compile

* moved doc comment out of trait implmeentation and to the trait

* PayOverXCM documentation

* Change documentation a bit

* Added empty benchmark methods implementation and changed docs

* update PayOverXCM to convert AccountIds to MultiLocations

* Implement benchmarking method

* Change v3 to latest

* Descend origin to an asset sender (#6970)

* descend origin to an asset sender

* sender as tuple of dest and sender

* Add more variants to the QueryResponseStatus enum

* Change Beneficiary to Into<[u8; 32]>

* update PayOverXcm to return concrete errors and use AccountId as sender

* use polkadot-primitives for AccountId

* fix dependency to use polkadot-core-primitives

* force Unpaid instruction to the top of the instructions list

* modify report_outcome to accept interior argument

* use new_query directly for building final xcm query, instead of report_outcome

* fix usage of new_query to use the XcmQueryHandler

* fix usage of new_query to use the XcmQueryHandler

* tiny method calling fix

* xcm query handler (#7198)

* drop redundant query status

* rename ReportQueryStatus to OuterQueryStatus

* revert rename of QueryResponseStatus

* update mapping

* Update xcm/xcm-builder/src/pay.rs

Co-authored-by: Gavin Wood <[email protected]>

* Updates

* Docs

* Fix benchmarking stuff

* Destination can be determined based on asset_kind

* Tweaking API to minimise clones

* Some repotting and docs

---------

Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Muharem Ismailov <[email protected]>
Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Gavin Wood <[email protected]>

* XCM: Fix issue with RequestUnlock

* Leave API changes for v4

* Fix clippy errors

* Fix tests

---------

Co-authored-by: parity-processbot <>

* Tools for unique topic references

* Formatting

* Naming

* Repot into routing.rs.

* More things done

* Universal Exporter supports topic-as-reference

* Some tests for the topic routing

* More tests

* Paid bridge tests

* Add message ID to sending events

* Formatting

* fix and integrate into test nets

* Move DenyThenTry and friend from Cumulus

* Append SetTopic rather than prepend

* Docs

* Docs

* Work with new ProcessMessage ID API

* Formatting

* Fix build

* Fixes

* Formatting

* Update xcm/xcm-builder/src/barriers.rs

Co-authored-by: Francisco Aguirre <[email protected]>

* Update xcm/xcm-builder/src/routing.rs

Co-authored-by: Francisco Aguirre <[email protected]>

* Docs

* Rename message_hash

* Formatting

* ".git/.scripts/commands/fmt/fmt.sh"

* Rename

* Another Rename

* ".git/.scripts/commands/fmt/fmt.sh"

* ".git/.scripts/commands/fmt/fmt.sh"

* Update xcm/xcm-builder/src/routing.rs

Co-authored-by: Keith Yeung <[email protected]>

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <[email protected]>

* Move XCM matcher to xcm-builder

* Use ProcessMessageError as the error type in MatchXcm and ShouldExecute

* Implement a blocking barrier

* Fixes

* Add benchmarking for force_suspension

* ".git/.scripts/commands/bench/bench.sh" runtime westend pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime rococo pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime kusama pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime polkadot pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime westend pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime rococo pallet_xcm

---------

Co-authored-by: command-bot <>

* Happy New Year!

* Remove year entierly

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Remove years from copyright notice in the entire repo

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>