Skip to content
README.md 8.69 KiB
Newer Older
# Substrate Node Template
Dan Forbes's avatar
Dan Forbes committed
A new FRAME-based Substrate node, ready for hacking :rocket:
Dan Forbes's avatar
Dan Forbes committed
## Local Development
Dan Forbes's avatar
Dan Forbes committed
Follow these steps to prepare a local Substrate development environment :hammer_and_wrench:
Dan Forbes's avatar
Dan Forbes committed
### Simple Setup
Install all the required dependencies with a single command (be patient, this can take up to 30
minutes).
Dan Forbes's avatar
Dan Forbes committed
curl https://getsubstrate.io -sSf | bash -s -- --fast
Dan Forbes's avatar
Dan Forbes committed
### Manual Setup

Find manual setup instructions at the
[Substrate Developer Hub](https://substrate.dev/docs/en/knowledgebase/getting-started/#manual-installation).
Dan Forbes's avatar
Dan Forbes committed

### Build

Once the development environment is set up, build the node template. This command will build the
[Wasm](https://substrate.dev/docs/en/knowledgebase/advanced/executor#wasm-execution) and
[native](https://substrate.dev/docs/en/knowledgebase/advanced/executor#native-execution) code:
cargo build --release
Dan Forbes's avatar
Dan Forbes committed
### Single Node Development Chain
Dan Forbes's avatar
Dan Forbes committed
Purge any existing dev chain state:
./target/release/node-template purge-chain --dev
```

Dan Forbes's avatar
Dan Forbes committed
Start a dev chain:

```bash
./target/release/node-template --dev
Dan Forbes's avatar
Dan Forbes committed
Or, start a dev chain with detailed logging:
Dan Forbes's avatar
Dan Forbes committed
```bash
RUST_LOG=debug RUST_BACKTRACE=1 ./target/release/node-template -lruntime=debug --dev
```
Dan Forbes's avatar
Dan Forbes committed
### Multi-Node Local Testnet
Dan Forbes's avatar
Dan Forbes committed
To see the multi-node consensus algorithm in action, run a local testnet with two validator nodes,
Alice and Bob, that have been [configured](/bin/node-template/node/src/chain_spec.rs) as the initial
authorities of the `local` testnet chain and endowed with testnet units.
Dan Forbes's avatar
Dan Forbes committed
Note: this will require two terminal sessions (one for each node).
Dan Forbes's avatar
Dan Forbes committed
Start Alice's node first. The command below uses the default TCP port (30333) and specifies
`/tmp/alice` as the chain database location. Alice's node ID will be
`12D3KooWEyoppNCUx8Yx66oV9fJnriXwCcXwDDUA2kj6vnc6iDEp` (legacy representation:
`QmRpheLN4JWdAnY7HGJfWFNbfkQCb6tFf4vvA6hgjMZKrR`); this is determined by the `node-key`.

```bash
cargo run -- \
  --base-path /tmp/alice \
  --chain=local \
  --alice \
  --node-key 0000000000000000000000000000000000000000000000000000000000000001 \
  --telemetry-url 'ws://telemetry.polkadot.io:1024 0' \
Dan Forbes's avatar
Dan Forbes committed
In another terminal, use the following command to start Bob's node on a different TCP port (30334)
and with a chain database location of `/tmp/bob`. The `--bootnodes` option will connect his node to
Alice's on TCP port 30333:

```bash
cargo run -- \
  --base-path /tmp/bob \
Dan Forbes's avatar
Dan Forbes committed
  --bootnodes /ip4/127.0.0.1/tcp/30333/p2p/12D3KooWEyoppNCUx8Yx66oV9fJnriXwCcXwDDUA2kj6vnc6iDEp \
  --chain=local \
  --bob \
  --port 30334 \
Dan Forbes's avatar
Dan Forbes committed
  --ws-port 9945 \
  --telemetry-url 'ws://telemetry.polkadot.io:1024 0' \
Dan Forbes's avatar
Dan Forbes committed
Execute `cargo run -- --help` to learn more about the template node's CLI options.

## Template Structure

A Substrate project such as this consists of a number of components that are spread across a few
directories.

### Node

A blockchain node is an application that allows users to participate in a blockchain network.
Substrate-based blockchain nodes expose a number of capabilities:

-   Networking: Substrate nodes use the [`libp2p`](https://libp2p.io/) networking stack to allow the
    nodes in the network to communicate with one another.
-   Consensus: Blockchains must have a way to come to
    [consensus](https://substrate.dev/docs/en/knowledgebase/advanced/consensus) on the state of the
    network. Substrate makes it possible to supply custom consensus engines and also ships with
    several consensus mechanisms that have been built on top of
    [Web3 Foundation research](https://research.web3.foundation/en/latest/polkadot/NPoS/index.html).
-   RPC Server: A remote procedure call (RPC) server is used to interact with Substrate nodes.

There are several files in the `node` directory - take special note of the following:

-   [`chain_spec.rs`](./node/src/chain_spec.rs): A
    [chain specification](https://substrate.dev/docs/en/knowledgebase/integrate/chain-spec) is a
    source code file that defines a Substrate chain's initial (genesis) state. Chain specifications
    are useful for development and testing, and critical when architecting the launch of a
    production chain. Take note of the `development_config` and `testnet_genesis` functions, which
    are used to define the genesis state for the local development chain configuration. These
    functions identify some
    [well-known accounts](https://substrate.dev/docs/en/knowledgebase/integrate/subkey#well-known-keys)
    and use them to configure the blockchain's initial state.
-   [`service.rs`](./node/src/service.rs): This file defines the node implementation. Take note of
    the libraries that this file imports and the names of the functions it invokes. In particular,
    there are references to consensus-related topics, such as the
    [longest chain rule](https://substrate.dev/docs/en/knowledgebase/advanced/consensus#longest-chain-rule),
    the [Aura](https://substrate.dev/docs/en/knowledgebase/advanced/consensus#aura) block authoring
    mechanism and the
    [GRANDPA](https://substrate.dev/docs/en/knowledgebase/advanced/consensus#grandpa) finality
    gadget.

After the node has been [built](#build), refer to the embedded documentation to learn more about the
capabilities and configuration parameters that it exposes:

```shell
./target/release/node-template --help
```

### Runtime

In Substrate, the terms
"[runtime](https://substrate.dev/docs/en/knowledgebase/getting-started/glossary#runtime)" and
"[state transition function](https://substrate.dev/docs/en/knowledgebase/getting-started/glossary#stf-state-transition-function)"
are analogous - they refer to the core logic of the blockchain that is responsible for validating
blocks and executing the state changes they define. The Substrate project in this repository uses
the [FRAME](https://substrate.dev/docs/en/knowledgebase/runtime/frame) framework to construct a
blockchain runtime. FRAME allows runtime developers to declare domain-specific logic in modules
called "pallets". At the heart of FRAME is a helpful
[macro language](https://substrate.dev/docs/en/knowledgebase/runtime/macros) that makes it easy to
create pallets and flexibly compose them to create blockchains that can address
[a variety of needs](https://www.substrate.io/substrate-users/).

Review the [FRAME runtime implementation](./runtime/src/lib.rs) included in this template and note
the following:

-   This file configures several pallets to include in the runtime. Each pallet configuration is
    defined by a code block that begins with `impl $PALLET_NAME::Trait for Runtime`.
-   The pallets are composed into a single runtime by way of the
    [`construct_runtime!`](https://crates.parity.io/frame_support/macro.construct_runtime.html)
    macro, which is part of the core
    [FRAME Support](https://substrate.dev/docs/en/knowledgebase/runtime/frame#support-library)
    library.

### Pallets

The runtime in this project is constructed using many FRAME pallets that ship with the
[core Substrate repository](https://github.com/paritytech/substrate/tree/master/frame) and a
template pallet that is [defined in the `pallets`](./pallets/template/src/lib.rs) directory.

A FRAME pallet is compromised of a number of blockchain primitives:

-   Storage: FRAME defines a rich set of powerful
    [storage abstractions](https://substrate.dev/docs/en/knowledgebase/runtime/storage) that makes
    it easy to use Substrate's efficient key-value database to manage the evolving state of a
    blockchain.
-   Dispatchables: FRAME pallets define special types of functions that can be invoked (dispatched)
    from outside of the runtime in order to update its state.
-   Events: Substrate uses [events](https://substrate.dev/docs/en/knowledgebase/runtime/events) to
    notify users of important changes in the runtime.
-   Errors: When a dispatchable fails, it returns an error.
-   Trait: The `Trait` configuration interface is used to define the types and parameters upon which
    a FRAME pallet depends.

Dan Forbes's avatar
Dan Forbes committed
## Generate a Custom Node Template

Generate a Substrate node template based on a particular commit by running the following commands:

```bash
# Clone from the main Substrate repo
git clone https://github.com/paritytech/substrate.git
cd substrate

# Switch to the branch or commit to base the template on
git checkout <branch/tag/sha1>

# Run the helper script to generate a node template. This script compiles Substrate, so it will take
# a while to complete. It expects a single parameter: the location for the script's output expressed
# as a relative path.
.maintain/node-template-release.sh ../node-template.tar.gz
```

Custom node templates are not supported. Please use a recently tagged version of the
[Substrate Developer Node Template](https://github.com/substrate-developer-hub/substrate-node-template)
in order to receive support.